- 07 Jul, 2017 5 commits
-
-
Alexandre Belloni authored
Many RTCs have an on board non volatile storage. It can be battery backed RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace and in-kernel consumers. This stays compatible with the previous (non documented) ABI that was using /sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about the deprecation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
While highly unlikely, it is possible to get an interrupt as soon as it is requested. In that case, at91_rtc_interrupt() will be called with rtc == NULL. Solve that by using devm_rtc_allocate_device/rtc_register_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
Introduce rtc_register_device() to register an already allocated and initialized struct rtc_device. It automatically sets up the owner and the two steps allocation/registration will allow to remove race conditions in the IRQ handling of some driver. It also allows to properly extend the core without adding more arguments to rtc_device_register(). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
Create rtc_device_get_id to allocate the id for an RTC. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
Create rtc_allocate_device to allocate memory for a struct rtc_device and initialize it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 06 Jul, 2017 9 commits
-
-
Amelie Delaunay authored
This patch adds support for STM32H7 RTC. On STM32H7, the RTC bus interface clock (APB clock) needs to be enabled. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Amelie Delaunay authored
This patch documents support for STM32H7 Real Time Clock. It introduces a new compatible and rework clock definitions. On STM32H7 we have a 'pclk' clock for register access, in addition to the 'rtc_ck' clock. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Sean Nyekjaer authored
The ds1308 variant is very similar to the already supported ds1338 variant, it have more debug registers and a square wave clock output. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Kirill Esipov authored
DS3232/DS3234 has the temperature registers with a resolution of 0.25 degree celsius. This enables to get the value through hwmon. # cat /sys/class/hwmon/hwmon0/temp1_input 37250 Signed-off-by: Kirill Esipov <yesipov@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Dan Carpenter authored
We should change this post-op to a pre-op because we want the loop to exit with "timeout" set to zero. Fixes: 0a89b553 ("nuc900/rtc: change the waiting for device ready implement") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Linus Walleij authored
The Gemini RTC is actually a generic IP block from Faraday Technology names FTRTC010. Rename the driver file and all symbols to match this IP name. The relationship can be clearly seen in the U-Boot driver posted by Po-Yu Chuang for the Faraday A320 board: https://lists.denx.de/pipermail/u-boot/2009-September/061326.html Remove the dependency on ARCH_GEMINI but select the driver for ARCH_GEMINI so we get a smooth transition. The IP block is synthsized on different silicon and architectures. Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Linus Walleij authored
The Gemini RTC is actually a standard IP block from Faraday Technology called FTRTC010. Rename the bindings, add the generic compatible string and add definitions for the two available clocks. Cc: devicetree@vger.kernel.org Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Linus Walleij authored
This makes the Gemini optionally take two clock references to the PCLK and EXTCLK. As we are adding a clock framework to the Gemini platform we need to make sure that we get the right references. Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Heiner Kallweit authored
The driver has lots of places with chip-specific code what doesn't necessarily facilitate maintenance. Let's describe chip-specific differences in century bit handling in struct chip_desc to improve this. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 05 Jul, 2017 2 commits
-
-
Heiner Kallweit authored
After the switch to regmap we can now make use of regmap_update_bits to simplify read/modify/write ops. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Brian Norris authored
This adds support for the Broadcom STB wake-timer which is a timer in the chip's 27Mhz clock domain that offers the ability to wake the system (wake-up source) from suspend states (S2, S3, S5). It is supported using the rtc framework allowing us to configure alarms for system wake-up. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 26 Jun, 2017 1 commit
-
-
Florian Fainelli authored
Document the binding for the Broadcom STB SoCs wake-up timer node allowing the system to generate alarms and exit low power states. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 24 Jun, 2017 9 commits
-
-
Marek Vasut authored
Add support for yet another RTC chip, Epson RX8130CE. This time around, the chip has slightly permutated registers and also the register starts at 0x10 instead of 0x0 . So far, we only support the RTC and NVRAM parts of the chip, Alarm and Timer is not supported. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Krzysztof Kozlowski authored
clk_enable() can fail so handle such case. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Krzysztof Kozlowski authored
clk_prepare_enable() can fail so handle such case. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Krzysztof Kozlowski authored
All instances of struct s3c_rtc_data are in fact static const thus put in rodata so we should not drop the const while getting the pointer to them. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Krzysztof Kozlowski authored
There is no need for casting to void pointer for of_device_id data. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Krzysztof Kozlowski authored
Minor cleanups to make the code easier to read. No functional changes. 1. Remove one space before labels as this is nowadays mostly preferred. 2. Fix indentation of arguments in function calls. 3. Split structure member declaration. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Krzysztof Kozlowski authored
In other error paths in probe, centralized exit point was used so make this consistent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Diaz de Grenu, Jose authored
This variable was never used. With GCC 6.2, we get the following warning: drivers/rtc/rtc-mxc.c:44:18: warning: ‘PIE_BIT_DEF’ defined but not used [-Wunused-const-variable=] static const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = { Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Vaibhav Jain authored
Provide an implementation of the callback rtc_class_ops.alarm_irq_enable for rtc-opal driver. This callback is called when the wake alarm is disabled via the command: 'echo 0 > /sys/class/rtc/rtc0/wakealarm' Without this the Timed-Power-On(TPO) config remains set even when its disabled by the above command and FSP will still force machine boot at previously configured alarm time. The callback is implemented as function opal_tpo_alarm_irq_enable() which calls opal_set_tpo_time() with alarm.enabled == 0. A branch is added to opal_set_tpo_time() to handle this case by passing y_m_d == h_m_s_ms == 0 to opal as arguments for opal_tpo_write() call. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 03 Jun, 2017 5 commits
-
-
Alexandre Belloni authored
rtc->name is only used in messages were it is superfluous. Remove it completely from the structure. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
ds1307->rtc->name is a copy of ds1307->name, use it instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
pcf8563->rtc->name is a copy of pcf8563_driver.driver.name, use it instead Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
rtc->name is superfluous here because the rtc is already registered at that point and its name has already been printed. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
The name sysfs attribute is not useful in its current form because of all the drivers: - 3 are using the feature correctly - 2 are clearly misusing it - 60 are using driver.name, either directly or indirectly - 46 are using pdev->name - 8 are using client->name - 31 are using a variation of driver.name (addition or removal of rtc-, -rtc, _rtc, rtc_) Make it uniform and use the driver name and the device name. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 31 May, 2017 8 commits
-
-
Mauro Carvalho Chehab authored
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - adjust identation of the titles; - mark a table as such; - don't capitalize chapter names. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Vaibhav Jain authored
In function __rtc_read_alarm() its possible for an alarm time-stamp to be invalid even after replacing missing components with current time-stamp. The condition 'alarm->time.tm_year < 70' will trigger this case and will cause the call to 'rtc_tm_to_time64(&alarm->time)' return a negative value for variable t_alm. While handling alarm rollover this negative t_alm (assumed to seconds offset from '1970-01-01 00:00:00') is converted back to rtc_time via rtc_time64_to_tm() which results in this error log with seemingly garbage values: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" This error was generated when the rtc driver (rtc-opal in this case) returned an alarm time-stamp of '00-00-00 00:00:00' to indicate that the alarm is disabled. Though I have submitted a separate fix for the rtc-opal driver, this issue may potentially impact other existing/future rtc drivers. To fix this issue the patch validates the alarm time-stamp just after filling up the missing datetime components and if rtc_valid_tm() still reports it to be invalid then bails out of the function without handling the rollover. Reported-by: Steve Best <sbest@redhat.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Vaibhav Jain authored
On PowerNV platform when Timed-Power-On(TPO) is disabled, read of stored TPO yields value with all date components set to '0' inside opal_get_tpo_time(). The function opal_to_tm() then converts it to an offset from year 1900 yielding alarm-time == "1900-00-01 00:00:00". This causes problems with __rtc_read_alarm() that expecting an offset from "1970-00-01 00:00:00" and returned alarm-time results in a -ve value for time64_t. Which ultimately results in this error reported in kernel logs with a seemingly garbage value: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" We fix this by explicitly handling the case of all alarm date-time components being '0' inside opal_get_tpo_time() and returning -ENOENT in such a case. This signals generic rtc that no alarm is set and it bails out from the alarm initialization flow without reporting the above error. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reported-by: Steve Best <sbest@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Gary Bisson authored
Some devices supported by the m41t80 driver have a programmable square-wave output signal (see M41T80_FEATURE_SQ). This enables to use this feature as a clock provider of common clock framework. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Gary Bisson authored
In order to use the proper clock framework to control this feature. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Gary Bisson authored
This patch is only relevant for RTC with the SQ_ALT feature which means the clock output frequency divider is stored in the weekday register. Current implementation discards the previous dividers value and clear them as soon as the time is set. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Gary Bisson authored
Currently setting an alarm clears the SQWE bit which means that the clock output is disabled no matter its previous state. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
David Lowe authored
This patch extends the fixes for ds1337, ds1339, ds3231 in commit 8bc2a407 ("rtc: ds1307: add support for the DT property 'wakeup-source'") to mcp794xx devices, so that those parts can similarly be used as a wakeup source without an IRQ to the processor. Tested on Raspberry Pi ZeroW with MCP79400. Signed-off-by: David Lowe <dave-lowe@ntlworld.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 26 May, 2017 1 commit
-
-
Heiner Kallweit authored
This patch converts the ds1307 driver to using regmap. It's a rather big patch and I can test with DS3231 only. With this chip it's working fine. I'd appreciate if people with other supported hardware could test as well. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-