An error occurred fetching the project authors.
- 17 Sep, 2018 29 commits
-
-
Julian Wiedmann authored
Restructure the OSN xmit path to handle misaligned HW headers properly, without shifting the packet data around. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Switch TSO over to the faster transmit path, and remove all the unused old TSO code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Add all the necessary TSO plumbing to the copy-less transmit path. This includes calculating the right length of required protocol headers, and always building a separate buffer element for the TSO headers. A follow-up patch will then switch TSO traffic over to this path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
When qeth_add_hw_header() falls back to the header cache, ensure that the requested length doesn't exceed the object size. For current usage this is a no-brainer, but TSO transmission will introduce protocol headers of varying length. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
When qeth_add_hw_header() falls back to the HW header cache, it also copies over the necessary protocol headers. Thus any manipulation to the protocol headers needs to happen before adding the HW header. For current usage this doesn't matter, but it becomes relevant when moving TSO transmission over to the faster code path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Combined L3+L4 csum offload is only required for some L3 HW. So for L2 devices, don't offload the IP header csum calculation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reference-ID: JUP 394553 Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Convert the last remaining user of qeth_get_elements_no() to qeth_count_elements(), so this helper can be removed. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
qeth_l3_xmit() is now only used for TSOv4 traffic, shrink it down. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
L3 OSAs can only offload IPv4 traffic, use the common L2 transmit path for all other traffic. In particular there's no support for TX VLAN offload, so any such packet needs to be manually de-accelerated via ndo_features_check(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
We need the exact same transmit path for non-offload-eligible traffic on L3 OSAs. So make it accessible from both sub-drivers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Weilin Chang authored
1. Add functions for get_fecparam and set_fecparam. 2. Modify lio_get_link_ksettings to display FEC setting. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
of_node_put has taken the null pointer check into account. So it is safe to remove the duplicated check before of_node_put. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
put_device has taken the null pinter check into account. So it is safe to remove the duplicated check before put_device. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
of_node_put has taken the null pointer check into account. So it is safe to remove the duplicated check before of_node_put. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
of_node_put has taken the null pointer check into account. So it is safe to remove the duplicated check before of_node_put. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhu Yanjun authored
The function rds_inc_init is in recv process. To use memset can optimize the function rds_inc_init. The test result: Before: 1) + 24.950 us | rds_inc_init [rds](); After: 1) + 10.990 us | rds_inc_init [rds](); Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vakul Garg authored
A number of tls selftests rely upon recv() to return an exact number of data bytes. When tls record crypto is done using an async accelerator, it is possible that recv() returns lesser than expected number bytes. This leads to failure of many test cases. To fix it, MSG_WAITALL has been used in flags passed to recv() syscall. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Friedemann Gerold authored
This patch fixes skb_shared area, which will be corrupted upon reception of 4K jumbo packets. Originally build_skb usage purpose was to reuse page for skb to eliminate needs of extra fragments. But that logic does not take into account that skb_shared_info should be reserved at the end of skb data area. In case packet data consumes all the page (4K), skb_shinfo location overflows the page. As a consequence, __build_skb zeroed shinfo data above the allocated page, corrupting next page. The issue is rarely seen in real life because jumbo are normally larger than 4K and that causes another code path to trigger. But it 100% reproducible with simple scapy packet, like: sendp(IP(dst="192.168.100.3") / TCP(dport=443) \ / Raw(RandString(size=(4096-40))), iface="enp1s0") Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Reported-by: Friedemann Gerold <f.gerold@b-c-s.de> Reported-by: Michael Rauch <michael@rauch.be> Signed-off-by: Friedemann Gerold <f.gerold@b-c-s.de> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hauke Mehrtens says: ==================== net: lantiq: Minor fixes for vrx200 and gswip These are mostly minor fixes to problems addresses in the latests round of the review of the original series adding these driver, which were not applied before the patches got merged into net-next. In addition it fixes a data bus error on poweroff. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
The gswip tag was missing in the dsa_tag_protocol_to_str() function, add it. Fixes: 79691192 ("net: dsa: Add Lantiq / Intel GSWIP tag support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
Use one code block when returning because the interface type is unsupported and also check if some unsupported port gets configured. In addition fix a double the and use dsa_is_cpu_port() instated of manually getting the CPU port. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
The switch and the MAC are in one IP core and they use the same clock signal from the clock generation unit. Currently the clock architecture in the lantiq SoC code does not allow to easily share the same clocks, this has to be fixed by switching to the common clock framework. As a workaround the clock of the switch and MAC should be activated when the MAC gets probed and only disabled when the MAC gets removed. This way it is ensured that the clock is always enabled when the switch or MAC is used. The switch can not be used without the MAC. This fixes a data bus error when rebooting the system and deactivating the switch and mac and later accessing some registers in the cleanup while the clocks are disabled. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
* Use one compatible line per line in the documentation * Remove SoC revision depended compatible lines, we can detect that in the driver * Use lower case letters in hex addresses * Fix the size of the address ranges in the example, this now matches the sizes used by the SoC. The old ones will also work, this just adds some empty address space. * Change the reg size of the gphy-fw node Fixes: 86ce2bc7 ("dt-bindings: net: dsa: Add lantiq, xrx200-gswip DT bindings") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: devicetree@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
Use lower case letters in the addresses of the device tree binding. In addition replace eth with ethernet and fix the size of the reg element in the example. The additional range does not contain any registers but is used for the IP block on the this SoC. Fixes: 839790e8 ("dt-bindings: net: Add lantiq, xrx200-net DT bindings") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: devicetree@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c:322:5: warning: symbol 'hns_gmac_wait_fifo_clean' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
The return value from of_reset_control_array_get_exclusive() is not checked correctly. The test is done against a wrong variable. This patch fix it. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
When async support was added it needed to access the sk from the async callback to report errors up the stack. The patch tried to use space after the aead request struct by directly setting the reqsize field in aead_request. This is an internal field that should not be used outside the crypto APIs. It is used by the crypto code to define extra space for private structures used in the crypto context. Users of the API then use crypto_aead_reqsize() and add the returned amount of bytes to the end of the request memory allocation before posting the request to encrypt/decrypt APIs. So this breaks (with general protection fault and KASAN error, if enabled) because the request sent to decrypt is shorter than required causing the crypto API out-of-bounds errors. Also it seems unlikely the sk is even valid by the time it gets to the callback because of memset in crypto layer. Anyways, fix this by holding the sk in the skb->sk field when the callback is set up and because the skb is already passed through to the callback handler via void* we can access it in the handler. Then in the handler we need to be careful to NULL the pointer again before kfree_skb. I added comments on both the setup (in tls_do_decryption) and when we clear it from the crypto callback handler tls_decrypt_done(). After this selftests pass again and fixes KASAN errors/warnings. Fixes: 94524d8f ("net/tls: Add support for async decryption of tls records") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Vakul Garg <Vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Sep, 2018 6 commits
-
-
Haishuang Yan authored
Same as ip_gre, use gre_parse_header to parse gre header in gre error handler code. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
gre_parse_header stops parsing when csum_err is encountered, which means tpi->key is undefined and ip_tunnel_lookup will return NULL improperly. This patch introduce a NULL pointer as csum_err parameter. Even when csum_err is encountered, it won't return error and continue parsing gre header as expected. Fixes: 9f57c67c ("gre: Remove support for sharing GRE protocol hook.") Reported-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
PHY_POLL is defined as -1 which means that we would be setting all flags of the PHY driver, this is also not a valid flag to tell PHYLIB about, just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Davide Caratti says: ==================== net/sched: act_police: lockless data path the data path of 'police' action can be faster if we avoid using spinlocks: - patch 1 converts act_police to use per-cpu counters - patch 2 lets act_police use RCU to access its configuration data. test procedure (using pktgen from https://github.com/netoptimizer): # ip link add name eth1 type dummy # ip link set dev eth1 up # tc qdisc add dev eth1 clsact # tc filter add dev eth1 egress matchall action police \ > rate 2gbit burst 100k conform-exceed pass/pass index 100 # for c in 1 2 4; do > ./pktgen_bench_xmit_mode_queue_xmit.sh -v -s 64 -t $c -n 5000000 -i eth1 > done test results (avg. pps/thread): $c | before patch | after patch | improvement ----+--------------+--------------+------------- 1 | 3518448 | 3591240 | irrelevant 2 | 3070065 | 3383393 | 10% 4 | 1540969 | 3238385 | 110% ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
use RCU instead of spinlocks, to protect concurrent read/write on act_police configuration. This reduces the effects of contention in the data path, in case multiple readers are present. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
use per-CPU counters, instead of sharing a single set of stats with all cores. This removes the need of using spinlock when statistics are read or updated. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Sep, 2018 4 commits
-
-
Ganesh Goudar authored
- In CXGB4_DCB_STATE_FW_INCOMPLETE state check if the dcb version is changed and update the dcb supported version. - Also, fill the priority code point value for priority based flow control. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
print per rx-queue packet errors in sge_qinfo Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Do not put host-endian 0 or 1 into big endian feild. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
pcpu_lstats is defined in several files, so unify them as one and move to header file Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Sep, 2018 1 commit
-
-
Kees Cook authored
In the quest to remove all stack VLA usage from the kernel[1], this removes the VLA used for the emac xaht registers size. Since the size of registers can only ever be 4 or 8, as detected in emac_init_config(), the max can be hardcoded and a runtime test added for robustness. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Christian Lamparter <chunkeey@gmail.com> Cc: Ivan Mikhaylov <ivan@de.ibm.com> Cc: netdev@vger.kernel.org Co-developed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-