- 10 Sep, 2020 3 commits
-
-
Laurentiu Palcu authored
When compiling for 32bit platforms, the compilation fails with: ERROR: modpost: "__aeabi_ldivmod" [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined! ERROR: modpost: "__aeabi_uldivmod" [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined! This patch adds a dependency on ARM64 since no 32bit SoCs have DCSS, so far. Signed-off-by:
Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reported-by:
Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200910095250.7663-1-laurentiu.palcu@oss.nxp.com
-
YueHaibing authored
Kbuild warns when this file is built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o Add the missing license/author/description tags. Fixes: b7b23e44 ("drm/panel: s6e63m0: Break out SPI transport") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Zheng Bin authored
Fixes coccicheck warning: drivers/gpu/drm/bridge/tc358775.c:488:2-3: Unneeded semicolon Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Signed-off-by:
-
- 09 Sep, 2020 10 commits
-
-
Laurentiu Palcu authored
Add bindings for iMX8MQ Display Controller Subsystem. Signed-off-by:
Laurentiu Palcu <laurentiu.palcu@nxp.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Laurentiu Palcu authored
The driver is part of DRM subsystem and is located in drivers/gpu/drm/imx/dcss. Signed-off-by:
-
Laurentiu Palcu authored
Make use of drm_bridge_connector API to have the connector initialized by the display controller. Signed-off-by:
-
Laurentiu Palcu authored
This adds initial support for iMX8MQ's Display Controller Subsystem (DCSS). Some of its capabilities include: * 4K@60fps; * HDR10; * one graphics and 2 video pipelines; * on-the-fly decompression of compressed video and graphics; The reference manual can be found here: https://www.nxp.com/webapp/Download?colCode=IMX8MDQLQRM The current patch adds only basic functionality: one primary plane for graphics, linear, tiled and super-tiled buffers support (no graphics decompression yet), no HDR10 and no video planes. Video planes support and HDR10 will be added in subsequent patches once per-plane de-gamma/CSC/gamma support is in. Signed-off-by:
-
Laurentiu Palcu authored
Currently the drm/imx/ directory is compiled only if DRM_IMX is set. Adding a new IMX related IP in the same directory would need DRM_IMX to be set, which would bring in also IPUv3 core driver... The current patch would allow adding new IPs in the imx/ directory without needing to set DRM_IMX. Signed-off-by:
-
Bernard Zhao authored
Remove first assignment to info which is meaningless. Put the width and higth check first. This change is to make the code a bit readable. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Gurchetan Singh authored
In keeping with other features, report this in the debugfs. Signed-off-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-4-gurchetansingh@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gurchetan Singh authored
smatch reported this with the blob series: drivers/gpu/drm/virtio/virtgpu_kms.c:227 virtio_gpu_init() error: uninitialized symbol 'ret'. Signed-off-by:
-
Doug Horn authored
If a response to virtio_gpu_cmd_get_capset_info takes longer than five seconds to return, the callback will access freed kernel memory in vg->capsets. Signed-off-by:
Doug Horn <doughorn@google.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-2-gurchetansingh@chromium.orgSigned-off-by:
-
Gerd Hoffmann authored
Add drm_device argument to drm_prime_pages_to_sg(), so we can call dma_max_mapping_size() to figure the segment size limit and call into __sg_alloc_table_from_pages() with the correct limit. This fixes virtio-gpu with sev. Possibly it'll fix other bugs too given that drm seems to totaly ignore segment size limits so far ... v2: place max_segment in drm driver not gem object. v3: move max_segment next to the other gem fields. v4: just use dma_max_mapping_size(). Signed-off-by:
-
- 08 Sep, 2020 27 commits
-
-
Dave Airlie authored
These are now driver side. Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-14-airlied@gmail.com
-
Dave Airlie authored
Since the agp bind/unbind/destroy are now getting called from drivers rather than via the func table, drop the bdev parameter. Reviewed-by:
-
Dave Airlie authored
Reviewed-by:
-
Dave Airlie authored
These aren't used anymore. Reviewed-by:
-
Dave Airlie authored
Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Dave Airlie authored
Reviewed-by:
-
Dave Airlie authored
Acked-by:
-
Dave Airlie authored
Acked-by:
-
Dave Airlie authored
Do agp decision in the driver, instead of special binding funcs v2: use container_of, drop some {}. Reviewed-by: -
Dave Airlie authored
Reviewed-by:
-
Dave Airlie authored
Acked-by:
-
Dave Airlie authored
I want to remove the backend funcs Reviewed-by:
-
Dave Airlie authored
This pattern is cut-n-pasted across 4 drivers, switch it to a WARN_ON instead, as BUG_ON is considered a bad idea usually. Reviewed-by:
-
Melissa Wen authored
Add myself as maintainer of VKMS driver Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Acked-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904130605.vs5tnfhgnemnz6pt@smtp.gmail.com
-
Vaibhav Gupta authored
Drivers using legacy PCI power management .suspend()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bjorn@helgaas.com> Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907070221.29938-3-vaibhavgupta40@gmail.com
-
Vaibhav Gupta authored
Fixes commit 42ddb453 ("radeon: Conditionally compile PM code") Before the above mentioned patch, codes between the line number 547 and 2803 were already inside "#ifdef CONFIG_PM" container. Thus, addition of "#if defined(CONFIG_PM)" was not required in the patch. It also affected the "#ifdef CONFIG_PPC_OF" container (line 1943-2510). From the current snapshot of radeon_pm.c, remove: 1434 | #if defined(CONFIG_PM) and, 2213 | #endif This removes the redundant CONFIG_PM directive as well as fixes the CONFIG_PPC (earlier CONFIG_PPC_OF) container. Signed-off-by:
-
Mike Rapoport authored
The only in-tree user for mbx driver for Intel 2700G graphics chip was cm-x270 platform. Since this platform was removed by the commit 9d323914 ("ARM: pxa: remove Compulab pxa2xx boards") there is no point to keep the obsolete framebuffer driver. Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jason Yan authored
This addresses the following gcc warning with "make W=1": drivers/video/fbdev/kyro/STG4000InitDevice.c: In function ‘SetCoreClockPLL’: drivers/video/fbdev/kyro/STG4000InitDevice.c:247:6: warning: variable ‘ulCoreClock’ set but not used [-Wunused-but-set-variable] // yanaijie fixed 247 | u32 ulCoreClock; | ^~~~~~~~~~~ Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> [b.zolnierkie: minor patch summary fixup] Signed-off-by:
-
Jason Yan authored
This addresses the following gcc warning with "make W=1": drivers/video/fbdev/kyro/STG4000InitDevice.c: In function ‘ProgramClock’: drivers/video/fbdev/kyro/STG4000InitDevice.c:123:6: warning: variable ‘ulBestVCO’ set but not used [-Wunused-but-set-variable] 123 | u32 ulBestVCO = 0, ulBestClk = 0, ulBestScore = 0; | ^~~~~~~~~ Reported-by: -
kernel test robot authored
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci Cc: Denis Efremov <efremov@linux.com> Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Julia Lawall <julia.lawall@inria.fr> Cc: Bernie Thompson <bernie@plugable.com> [b.zolnierkie: minor patch summary fixup] [b.zolnierkie: removed "Fixes:" tag (not in upstream tree)] Signed-off-by:
-
Dinghao Liu authored
When radeon_kick_out_firmware_fb() fails, info should be freed just like the subsequent error paths. Fixes: 069ee21a ("fbdev: Fix loading of module radeonfb on PowerMac") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Mathieu Malaterre <malat@debian.org> Cc: Kangjie Lu <kjlu@umn.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Joe Perches authored
Use semicolons and braces. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Jiri Kosina <trivial@kernel.org> [b.zolnierkie: minor patch summary fixup] Signed-off-by:
-
Alex Dewar authored
par->vgapass is a u8, so if we are assuming that buf is at least PAGE_SIZE then the extra checking is pointless. Signed-off-by:
Alex Dewar <alex.dewar90@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> [b.zolnierkie: minor patch summary fixup] Signed-off-by:
-
Bilal Wasim authored
fbcon doc mentions FRAMEBUFFER_CONSOLE option to be under Device Drivers->Graphics Support->Frame buffer Devices-> Console display driver support->Framebuffer Console Support, while its under Device Drivers->Graphics Support-> Console display driver support->Framebuffer Console Support. Correcting it in the docs. Signed-off-by:
Bilal Wasim <bilalwasim676@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Sven Schneider authored
This font is derived from lib/fonts/font_6x10.c and is useful for small OLED displays Signed-off-by:
Sven Schneider <s.schneider@arkona-technologies.de> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Vaibhav Gupta authored
Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The ark_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "ark_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by:
-
Vaibhav Gupta authored
Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The s3_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by:
-
