- 25 Oct, 2017 21 commits
-
-
Mark Rutland authored
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by:Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Paul E. McKenney authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the mm code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by:Will Deacon <will.deacon@arm.com> Acked-by:
-
Paul E. McKenney authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle documentation, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the filesystems documentation to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: -
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. The bulk of the kernel code can be transformed via Coccinelle to use {READ,WRITE}_ONCE(), though this only modifies users of ACCESS_ONCE(), and not the implementation itself. As such, it has the potential to break homebrew ACCESS_ONCE() macros seen in some user code in the kernel tree (e.g. the virtio code, as fixed in commit ea9156fb). To avoid fragility if/when that transformation occurs, this patch reworks the definitions of {READ,WRITE}_ONCE() in the rcutorture formal tests, and removes the unused ACCESS_ONCE() helper. There should be no functional change as a result of this patch. Signed-off-by: -
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the workqueue code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by:Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-12-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by:
-
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. The bulk of the kernel code can be transformed via Coccinelle to use {READ,WRITE}_ONCE(), though this only modifies users of ACCESS_ONCE(), and not the implementation itself. As such, it has the potential to break homebrew ACCESS_ONCE() macros seen in some user code in the kernel tree (e.g. the virtio code, as fixed in commit ea9156fb). To avoid fragility if/when that transformation occurs, and to align with the preferred usage of {READ,WRITE}_ONCE(), this patch updates the DSCR selftest code to use READ_ONCE() rather than ACCESS_ONCE(). There should be no functional change as a result of this patch. Signed-off-by:Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-11-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by:
-
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. The bulk of the kernel code can be transformed via Coccinelle to use {READ,WRITE}_ONCE(), though this only modifies users of ACCESS_ONCE(), and not the implementation itself. As such, it has the potential to break homebrew ACCESS_ONCE() macros seen in some user code in the kernel tree (e.g. the virtio code, as fixed in commit ea9156fb). To avoid fragility if/when that transformation occurs, and to align with the preferred usage of {READ,WRITE}_ONCE(), this patch updates the MPSSD sample code to use READ_ONCE() rather than ACCESS_ONCE(). There should be no functional change as a result of this patch. Signed-off-by: -
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't pick up some uses, including those in <linux/average.h>. As a preparatory step, this patch converts the file to use {READ,WRITE}_ONCE() consistently. At the same time, this patch addds missing includes necessary for {READ,WRITE}_ONCE(), *BUG_ON*(), and ilog2(). ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by:Johannes Berg <johannes@sipsolutions.net> Cc: David S. Miller <davem@davemloft.net> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-9-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by:
-
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the IPv4 TCP input code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: -
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts netlink and netfilter code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: -
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the DVB ringbuffer code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: -
Mark Rutland authored
The NCPFS code has some stale comments regarding ACCESS_ONCE() uses which were removed a long time ago. Let's remove the stale comments. Signed-off-by:
-
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the dcache code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: -
Mark Rutland authored
workqueue: kill off ACCESS_ONCE() For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the Tegra IVC code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: -
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the Altera EDAC code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by:Thor Thayer <thor.thayer@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-2-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by:
-
Mark Rutland authored
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't pick up some uses, including those in dm-integrity.c. As a preparatory step, this patch converts the driver to use {READ,WRITE}_ONCE() consistently. At the same time, this patch adds the missing include of <linux/compiler.h> necessary for the {READ,WRITE}_ONCE() definitions. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: -
Will Deacon authored
When a prospective writer takes the qrwlock locking slowpath due to the lock being held, it attempts to cmpxchg the wmode field from 0 to _QW_WAITING so that concurrent lockers also take the slowpath and queue on the spinlock accordingly, allowing the lockers to drain. Unfortunately, this isn't fair, because a fastpath writer that comes in after the lock is made available but before the _QW_WAITING flag is set can effectively jump the queue. If there is a steady stream of prospective writers, then the waiter will be held off indefinitely. This patch restores fairness by separating _QW_WAITING and _QW_LOCKED into two distinct fields: _QW_LOCKED continues to occupy the bottom byte of the lockword so that it can be cleared unconditionally when unlocking, but _QW_WAITING now occupies what used to be the bottom bit of the reader count. This then forces the slow-path for concurrent lockers. Tested-by:
Waiman Long <longman@redhat.com> Tested-by:
Jeremy Linton <jeremy.linton@arm.com> Tested-by:
Adam Wallis <awallis@codeaurora.org> Tested-by:
Jan Glauber <jglauber@cavium.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Jeremy.Linton@arm.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1507810851-306-6-git-send-email-will.deacon@arm.comSigned-off-by:
-
Will Deacon authored
Now that the qrwlock can make use of WFE, remove our homebrewed rwlock code in favour of the generic queued implementation. Tested-by:
-
Will Deacon authored
The qrwlock slowpaths involve spinning when either a prospective reader is waiting for a concurrent writer to drain, or a prospective writer is waiting for concurrent readers to drain. In both of these situations, atomic_cond_read_acquire() can be used to avoid busy-waiting and make use of any backoff functionality provided by the architecture. This patch replaces the open-code loops and rspin_until_writer_unlock() implementation with atomic_cond_read_acquire(). The write mode transition zero to _QW_WAITING is left alone, since (a) this doesn't need acquire semantics and (b) should be fast. Tested-by:
-
Will Deacon authored
smp_cond_load_acquire() provides a way to spin on a variable with acquire semantics until some conditional expression involving the variable is satisfied. Architectures such as arm64 can potentially enter a low-power state, waking up only when the value of the variable changes, which reduces the system impact of tight polling loops. This patch makes the same interface available to users of atomic_t, atomic64_t and atomic_long_t, rather than require messy accesses to the structure internals. Signed-off-by:
-
Will Deacon authored
There's no good reason to keep the internal structure of struct qrwlock hidden from qrwlock.h, particularly as it's actually needed for unlock and ends up being abstracted independently behind the __qrwlock_write_byte() function. Stop pretending we can hide this stuff, and move the __qrwlock definition into qrwlock, removing the __qrwlock_write_byte() nastiness and using the same struct definition everywhere instead. Signed-off-by:
-
- 24 Oct, 2017 6 commits
-
-
Will Deacon authored
As part of the fight against smp_read_barrier_depends(), we require dependency ordering to be preserved when a dependency is headed by a load performed using an atomic operation. This patch adds smp_read_barrier_depends() to the _release() and _relaxed() atomics on alpha, which otherwise lack anything to enforce dependency ordering. Signed-off-by:
-
Will Deacon authored
lockless_dereference() is a nice idea, but it gained little traction in kernel code since its introduction three years ago. This is partly because it's a pain to type, but also because using READ_ONCE() instead has worked correctly on all architectures apart from Alpha, which is a fully supported but somewhat niche architecture these days. Now that READ_ONCE() has been upgraded to contain an implicit smp_read_barrier_depends() and the few callers of lockless_dereference() have been converted, we can remove lockless_dereference() altogether. Signed-off-by:
-
Will Deacon authored
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it can be used instead of lockless_dereference() without any change in semantics. Signed-off-by:
-
Will Deacon authored
In preparation for the removal of lockless_dereference(), which is the same as READ_ONCE() on all architectures other than Alpha, add an implicit smp_read_barrier_depends() to READ_ONCE() so that it can be used to head dependency chains on all architectures. Signed-off-by:
-
Will Deacon authored
linux/compiler.h is included indirectly by linux/types.h via uapi/linux/types.h -> uapi/linux/posix_types.h -> linux/stddef.h -> uapi/linux/stddef.h and is needed to provide a proper definition of offsetof. Unfortunately, compiler.h requires a definition of smp_read_barrier_depends() for defining lockless_dereference() and soon for defining READ_ONCE(), which means that all users of READ_ONCE() will need to include asm/barrier.h to avoid splats such as: In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from arch/h8300/kernel/asm-offsets.c:11: include/linux/list.h: In function 'list_empty': >> include/linux/compiler.h:343:2: error: implicit declaration of function 'smp_read_barrier_depends' [-Werror=implicit-function-declaration] smp_read_barrier_depends(); /* Enforce dependency ordering from x */ \ ^ A better alternative is to include asm/barrier.h in linux/compiler.h, but this requires a type definition for "bool" on some architectures (e.g. x86), which is defined later by linux/types.h. Type "bool" is also used directly in linux/compiler.h, so the whole thing is pretty fragile. This patch splits compiler.h in two: compiler_types.h contains type annotations, definitions and the compiler-specific parts, whereas compiler.h #includes compiler-types.h and additionally defines macros such as {READ,WRITE.ACCESS}_ONCE(). uapi/linux/stddef.h and linux/linkage.h are then moved over to include linux/compiler_types.h, which fixes the build for h8 and blackfin. Signed-off-by: -
Ingo Molnar authored
Signed-off-by:
-
- 23 Oct, 2017 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO fixes from Greg KH: "Here are a small number of patches to resolve some reported IIO and a staging driver problem. Nothing major here, full details are in the shortlog below. All have been in linux-next with no reported issues" * tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: bcm2835-audio: Fix memory corruption iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property iio: adc: dln2-adc: fix build error iio: dummy: events: Add missing break staging: iio: ade7759: fix signed extension bug on shift of a u8 iio: pressure: zpa2326: Remove always-true check which confuses gcc iio: proximity: as3935: noise detection + threshold changes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are four small fixes for 4.14-rc6. Three of them are binder driver fixes for reported issues, and the last one is a hyperv driver bugfix. Nothing major, but good fixes to get into 4.14-final. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: android: binder: Fix null ptr dereference in debug msg android: binder: Don't get mm from task vmbus: hvsock: add proper sync for vmbus_hvsock_device_unregister() binder: call poll_wait() unconditionally.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/PHY fixes from Greg KH: "Here are a small number of USB and PHY driver fixes for 4.14-rc6 There is the usual musb and xhci fixes in here, as well as some needed phy patches. Also is a nasty regression fix for usbfs that has started to hit a lot of people using virtual machines. All of these have been in linux-next with no reported problems" * tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: hub: Allow reset retry for USB2 devices on connect bounce USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor() MAINTAINERS: fix git tree url for musb module usb: quirks: add quirk for WORLDE MINI MIDI keyboard usb: musb: sunxi: Explicitly release USB PHY on exit usb: musb: Check for host-mode using is_host_active() on reset interrupt usb: musb: musb_cppi41: Configure the number of channels for DA8xx usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers USB: musb: fix late external abort on suspend USB: musb: fix session-bit runtime-PM quirk usb: cdc_acm: Add quirk for Elatec TWN3 USB: devio: Revert "USB: devio: Don't corrupt user memory" usb: xhci: Handle error condition in xhci_stop_device() usb: xhci: Reset halted endpoint if trb is noop xhci: Cleanup current_cmd in xhci_cleanup_command_queue() xhci: Identify USB 3.1 capable hosts by their port protocol capability USB: serial: metro-usb: add MS7820 device id phy: rockchip-typec: Check for errors from tcphy_phy_init() phy: rockchip-typec: Don't set the aux voltage swing to 400 mV ...
-
- 22 Oct, 2017 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: "A fix for a broken commit in the previous pull breaking automatic module loading of input handlers, such ad evdev" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: do not use property bits when generating module alias
-
Dmitry Torokhov authored
The commit 8724ecb0 ("Input: allow matching device IDs on property bits") started using property bits when generating module aliases for input handlers, but did not adjust the generation of MODALIAS attribute on input device uevents, breaking automatic module loading. Given that no handler currently uses property bits in their module tables, let's revert this part of the commit for now. Reported-by:
Damien Wyart <damien.wyart@gmail.com> Tested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A couple of fixes addressing the following issues: - The last polishing for the TLB code, removing the last BUG_ON() and the debug file along with tidying up the lazy TLB code. - Prevent triple fault on 1st Gen. 486 caused by stupidly calling the early IDT setup after the first function which causes a fault which should be caught by the exception table. - Limit the mmap of /dev/mem to valid addresses - Prevent late microcode loading on Broadwell X - Remove a redundant assignment in the cache info code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/mm: Remove debug/x86/tlb_defer_switch_to_init_mm x86/mm: Tidy up "x86/mm: Flush more aggressively in lazy TLB mode" x86/mm/64: Remove the last VM_BUG_ON() from the TLB code x86/microcode/intel: Disable late loading on model 79 x86/idt: Initialize early IDT before cr4_init_shadow() x86/cpu/intel_cacheinfo: Remove redundant assignment to 'this_leaf' -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix to make the cs5535 clock event driver robust agaist spurious interrupts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents/drivers/cs5535: Improve resilience to spurious interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp/hotplug fix from Thomas Gleixner: "The recent rework of the callback invocation missed to cleanup the leftovers of the operation, so under certain circumstances a subsequent CPU hotplug operation accesses stale data and crashes. Clean it up." * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Reset node state after operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A series of fixes for perf tooling: - Make xyarray return the X/Y size correctly which fixes a crash in the exit code. - Fix the libc path in test so it works not only on Debian/Ubuntu correctly - Check for eBPF file existance and output a useful error message instead of failing to compile a non existant file - Make sure perf_hpp_fmt is not longer references before freeing it - Use list_del_init() in the histogram code to prevent a crash when the already deleted element is deleted again - Remove the leftovers of the removed '-l' option - Add reviewer entries to the MAINTAINERS file" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf test shell trace+probe_libc_inet_pton.sh: Be compatible with Debian/Ubuntu perf xyarray: Fix wrong processing when closing evsel fd perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACE perf record: Fix documentation for a inexistent option '-l' perf tools: Add long time reviewers to MAINTAINERS perf tools: Check wether the eBPF file exists in event parsing perf hists: Add extra integrity checks to fmt_free() perf hists: Fix crash in perf_hpp__reset_output_field() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of small fixes mostly in the irq drivers area: - Make the tango irq chip work correctly, which requires a new function in the generiq irq chip implementation - A set of updates to the GIC-V3 ITS driver removing a bogus BUG_ON() and parsing the VCPU table size correctly" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: generic chip: remove irq_gc_mask_disable_reg_and_ack() irqchip/tango: Use irq_gc_mask_disable_and_ack_set genirq: generic chip: Add irq_gc_mask_disable_and_ack_set() irqchip/gic-v3-its: Add missing changes to support 52bit physical address irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size irqchip/gic-v3-its: Fix the incorrect BUG_ON in its_init_vpe_domain() DT: arm,gic-v3: Update the ITS size in the examples -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Thomas Gleixner: "Plug a memory leak in the instruction decoder" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix memory leak in decode_instructions()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...
-
