- 11 Aug, 2018 7 commits
-
-
Coly Li authored
There are still many places in bcache use printk to display kernel message, which are suggested to be preplaced by pr_*() routines like pr_err(), pr_info(), or pr_notice(). This patch replaces all printk() with a proper pr_*() routine for bcache code. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Shenghui Wang <shhuiw@foxmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
Symbolic permission names are used in bcache, for now octal permission numbers are encouraged to use for readability. This patch replaces all symbolic permissions by octal permission numbers. Signed-off-by:
-
Coly Li authored
This patch fixes the lines over 80 characters into more lines, to minimize warnings by checkpatch.pl. There are still some lines exceed 80 characters, but it is better to be a single line and I don't change them. Signed-off-by:
-
Coly Li authored
There are many function definitions do not have identifier argument names, scripts/checkpatch.pl complains warnings like this, WARNING: function definition argument 'struct bcache_device *' should also have an identifier name #16735: FILE: writeback.h:120: +void bch_sectors_dirty_init(struct bcache_device *); This patch adds identifier argument names to all bcache function definitions to fix such warnings. Signed-off-by:
-
Coly Li authored
Signed-off-by:
-
Coly Li authored
This patch fixes warning reported by checkpatch.pl by replacing 'unsigned' with 'unsigned int'. Signed-off-by:
-
Bart Van Assche authored
For legacy queues the only call of blkg_root_lookup() happens after bypass mode has been enabled. Since blkg_lookup() returns NULL for queues in bypass mode, modify the blkg_root_lookup() such that it no longer depends on bypass mode. Rename the function into blk_queue_root_blkg() as suggested by Tejun. Suggested-by:
Tejun Heo <tj@kernel.org> Fixes: 6bad9b21 ("blkcg: Introduce blkg_root_lookup()") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 10 Aug, 2018 1 commit
-
-
Coly Li authored
Commit ea8c5356 ("bcache: set max writeback rate when I/O request is idle") changes struct bch_ratelimit member rate from uint32_t to atomic_long_t and uses atomic_long_set() in drivers/md/bcache/sysfs.c to set new writeback rate, after the input is converted from memory buf to long int by sysfs_strtoul_clamp(). The above change has a problem because there is an implicit return inside sysfs_strtoul_clamp() so the following atomic_long_set() won't be called. This error is detected by 0day system with following snipped smatch warnings: drivers/md/bcache/sysfs.c:271 __cached_dev_store() error: uninitialized symbol 'v'. 270 sysfs_strtoul_clamp(writeback_rate, v, 1, INT_MAX); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @271 atomic_long_set(&dc->writeback_rate.rate, v); This patch fixes the above error by using strtoul_safe_clamp() to convert the input buffer into a long int type result. Fixes: ea8c5356 ("bcache: set max writeback rate when I/O request is idle") Cc: Kai Krakow <kai@kaishome.de> Cc: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by:
-
- 09 Aug, 2018 20 commits
-
-
Jens Axboe authored
sparse complains: drivers/block/null_blk_main.c:816:24: sparse: context imbalance in 'null_insert_page' - unexpected unlock Fix it by adding the necessary annotations to the function. Signed-off-by: -
Liu Bo authored
When an application's iops has exceeded its cgroup's iops limit, surely it is throttled and kernel will set a timer for dispatching, thus IO latency includes the delay. However, the dispatch delay which is calculated by the limit and the elapsed jiffies is suboptimal. As the dispatch delay is only calculated once the application's iops is (iops limit + 1), it doesn't need to wait any longer than the remaining time of the current slice. The difference can be proved by the following fio job and cgroup iops setting, ----- $ echo 4 > /mnt/config/nullb/disk1/mbps # limit nullb's bandwidth to 4MB/s for testing. $ echo "253:1 riops=100 rbps=max" > /sys/fs/cgroup/unified/cg1/io.max $ cat r2.job [global] name=fio-rand-read filename=/dev/nullb1 rw=randread bs=4k direct=1 numjobs=1 time_based=1 runtime=60 group_reporting=1 [file1] size=4G ioengine=libaio iodepth=1 rate_iops=50000 norandommap=1 thinktime=4ms ----- wo patch: file1: (g=0): rw=randread, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=1 fio-3.7-66-gedfc Starting 1 process read: IOPS=99, BW=400KiB/s (410kB/s)(23.4MiB/60001msec) slat (usec): min=10, max=336, avg=27.71, stdev=17.82 clat (usec): min=2, max=28887, avg=5929.81, stdev=7374.29 lat (usec): min=24, max=28901, avg=5958.73, stdev=7366.22 clat percentiles (usec): | 1.00th=[ 4], 5.00th=[ 4], 10.00th=[ 4], 20.00th=[ 4], | 30.00th=[ 4], 40.00th=[ 4], 50.00th=[ 6], 60.00th=[11731], | 70.00th=[11863], 80.00th=[11994], 90.00th=[12911], 95.00th=[22676], | 99.00th=[23725], 99.50th=[23987], 99.90th=[23987], 99.95th=[25035], | 99.99th=[28967] w/ patch: file1: (g=0): rw=randread, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=1 fio-3.7-66-gedfc Starting 1 process read: IOPS=100, BW=400KiB/s (410kB/s)(23.4MiB/60005msec) slat (usec): min=10, max=155, avg=23.24, stdev=16.79 clat (usec): min=2, max=12393, avg=5961.58, stdev=5959.25 lat (usec): min=23, max=12412, avg=5985.91, stdev=5951.92 clat percentiles (usec): | 1.00th=[ 3], 5.00th=[ 3], 10.00th=[ 4], 20.00th=[ 4], | 30.00th=[ 4], 40.00th=[ 5], 50.00th=[ 47], 60.00th=[11863], | 70.00th=[11994], 80.00th=[11994], 90.00th=[11994], 95.00th=[11994], | 99.00th=[11994], 99.50th=[11994], 99.90th=[12125], 99.95th=[12125], | 99.99th=[12387] Signed-off-by:Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056543 ("Missing break in switch") Addresses-Coverity-ID: 1056544 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Bart Van Assche authored
Several block drivers call alloc_disk() followed by put_disk() if something fails before device_add_disk() is called without calling blk_cleanup_queue(). Make sure that also for this scenario a request queue is dissociated from the cgroup controller. This patch avoids that loading the parport_pc, paride and pf drivers triggers the following kernel crash: BUG: KASAN: null-ptr-deref in pi_init+0x42e/0x580 [paride] Read of size 4 at addr 0000000000000008 by task modprobe/744 Call Trace: dump_stack+0x9a/0xeb kasan_report+0x139/0x350 pi_init+0x42e/0x580 [paride] pf_init+0x2bb/0x1000 [pf] do_one_initcall+0x8e/0x405 do_init_module+0xd9/0x2f2 load_module+0x3ab4/0x4700 SYSC_finit_module+0x176/0x1a0 do_syscall_64+0xee/0x2b0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by:
Alexandru Moise <00moses.alexander00@gmail.com> Fixes: a063057d ("block: Fix a race between request queue removal and the block cgroup controller") # v4.17 Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Alexandru Moise <00moses.alexander00@gmail.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
This new function will be used in a later patch to verify whether a queue has been dissociated from the cgroup controller before being released. Signed-off-by:
-
Bart Van Assche authored
Commit 12f5b931 ("blk-mq: Remove generation seqeunce") removed the only seqcount_t and u64_stats_sync instances from <linux/blkdev.h> but did not remove the corresponding #include directives. Since these include directives are no longer needed, remove them. Signed-off-by:
-
Jianchao Wang authored
Currently, we count the hctx as active after allocate driver tag successfully. If a previously inactive hctx try to get tag first time, it may fails and need to wait. However, due to the stale tag ->active_queues, the other shared-tags users are still able to occupy all driver tags while there is someone waiting for tag. Consequently, even if the previously inactive hctx is waked up, it still may not be able to get a tag and could be starved. To fix it, we count the hctx as active before try to allocate driver tag, then when it is waiting the tag, the other shared-tag users will reserve budget for it. Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Greg Edwards authored
In commit ed996a52 ("block: simplify and cleanup bvec pool handling"), the value of the slab index is incremented by one in bvec_alloc() after the allocation is done to indicate an index value of 0 does not need to be later freed. bvec_nr_vecs() was not updated accordingly, and thus returns the wrong value. Decrement idx before performing the lookup. Fixes: ed996a52 ("block: simplify and cleanup bvec pool handling") Signed-off-by:
Greg Edwards <gedwards@ddn.com> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "This should be the last round of NVMe updates before the 4.19 merge window opens. It conatins support for write protected (aka read-only) namespaces from Chaitanya, two ANA fixes from Hannes and a fabrics fix from Tal Shorer." * 'nvme-4.19' of git://git.infradead.org/nvme: nvme-fabrics: fix ctrl_loss_tmo < 0 to reconnect forever nvmet: add ns write protect support nvme: set gendisk read only based on nsattr nvme.h: add support for ns write protect definitions nvme.h: fixup ANA group descriptor format nvme: fixup crash on failed discovery
-
Shenghui Wang authored
Remove the tailing backslash in macro BTREE_FLAG in btree.h Signed-off-by:
-
Shenghui Wang authored
The pr_err statement in the code for sysfs_attatch section would run for various error codes, which maybe confusing. E.g, Run the command twice: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach [the backing dev got attached on the first run] echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach In dmesg, after the command run twice, we can get: bcache: bch_cached_dev_attach() Can't attach sda6: already attached bcache: __cached_dev_store() Can't attach 796b5c05-b03c-4bc7-9cbd-\ a8df5e8be891 : cache set not found The first statement in the message was right, but the second was confusing. bch_cached_dev_attach has various pr_ statements for various error codes, except ENOENT. After the change, rerun above command twice: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach In dmesg we only got: bcache: bch_cached_dev_attach() Can't attach sda6: already attached No confusing "cache set not found" message anymore. And for some not exist SET-UUID: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be898 > \ /sys/block/bcache0/bcache/attach In dmesg we can get: bcache: __cached_dev_store() Can't attach 796b5c05-b03c-4bc7-9cbd-\ a8df5e8be898 : cache set not found Signed-off-by: -
Coly Li authored
Commit b1092c9a ("bcache: allow quick writeback when backing idle") allows the writeback rate to be faster if there is no I/O request on a bcache device. It works well if there is only one bcache device attached to the cache set. If there are many bcache devices attached to a cache set, it may introduce performance regression because multiple faster writeback threads of the idle bcache devices will compete the btree level locks with the bcache device who have I/O requests coming. This patch fixes the above issue by only permitting fast writebac when all bcache devices attached on the cache set are idle. And if one of the bcache devices has new I/O request coming, minimized all writeback throughput immediately and let PI controller __update_writeback_rate() to decide the upcoming writeback rate for each bcache device. Also when all bcache devices are idle, limited wrieback rate to a small number is wast of thoughput, especially when backing devices are slower non-rotation devices (e.g. SATA SSD). This patch sets a max writeback rate for each backing device if the whole cache set is idle. A faster writeback rate in idle time means new I/Os may have more available space for dirty data, and people may observe a better write performance then. Please note bcache may change its cache mode in run time, and this patch still works if the cache mode is switched from writeback mode and there is still dirty data on cache. Fixes: Commit b1092c9a ("bcache: allow quick writeback when backing idle") Cc: stable@vger.kernel.org #4.16+ Signed-off-by:
Kai Krakow <kai@kaishome.de> Tested-by:
Stefan Priebe <s.priebe@profihost.ag> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by:
-
Coly Li authored
This patch tries to add code comments in bset.c, to make some tricky code and designment to be more comprehensible. Most information of this patch comes from the discussion between Kent and I, he offers very informative details. If there is any mistake of the idea behind the code, no doubt that's from me misrepresentation. Signed-off-by:
-
Coly Li authored
This patch updates code comment in bch_keylist_realloc() by fixing incorrected function names, to make the code to be more comprehennsible. Signed-off-by:
-
Coly Li authored
This patch updates the code comment in struct cache with correct array names, to make the code to be more comprehensible. Signed-off-by:
-
Coly Li authored
This patch adds a line of code comment in super.c:register_bdev(), to make code to be more comprehensible. Signed-off-by:
-
Coly Li authored
In bch_btree_node_get() the read-in btree node will be partially prefetched into L1 cache for following bset iteration (if there is). But if the btree node read is failed, the perfetch operations will waste L1 cache space. This patch checkes whether read operation and only does cache prefetch when read I/O succeeded. Signed-off-by:
-
Coly Li authored
When writeback is not running, writeback rate should be 0, other value is misleading. And the following dyanmic writeback rate debug parameters should be 0 too, rate, proportional, integral, change otherwise they are misleading when writeback is not running. Signed-off-by:
-
Coly Li authored
Greg KH suggests that normal code should not care about debugfs. Therefore no matter successful or failed of debugfs_create_dir() execution, it is unncessary to check its return value. There are two functions called debugfs_create_dir() and check the return value, which are bch_debug_init() and closure_debug_init(). This patch changes these two functions from int to void type, and ignore return values of debugfs_create_dir(). This patch does not fix exact bug, just makes things work as they should. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Cc: Kai Krakow <kai@kaishome.de> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by:
-
- 08 Aug, 2018 8 commits
-
-
zhong jiang authored
kmem_cache_destroy has taken null pointer into account. So it is safe to drop the null check before calling the function. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
zhong jiang authored
mempool_destroy has taken the null pointer into account. So it is safe to remove the null check. Signed-off-by:
-
zhong jiang authored
debugfs_remove_recursive has taken null pointer into account. So it is safe to drop the null check before calling the function. Signed-off-by:
-
Tal Shorer authored
When the user supplies a ctrl_loss_tmo < 0, we warn them that this will cause the fabrics layer to attempt reconnection forever. However, in reality the fabrics layer never attempts to reconnect because the condition to test whether we should reconnect is backwards in this case. Signed-off-by:
Tal Shorer <tal.shorer@gmail.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Chaitanya Kulkarni authored
This patch implements the Namespace Write Protect feature described in "NVMe TP 4005a Namespace Write Protect". In this version, we implement No Write Protect and Write Protect states for target ns which can be toggled by set-features commands from the host side. For write-protect state transition, we need to flush the ns specified as a part of command so we also add helpers for carrying out synchronous flush operations. Signed-off-by:
-
Chaitanya Kulkarni authored
NVMe 1.3 TP 4005 introduces new filed (NSATTR). This field indicates whether given namespace is write protected or not. This patch sets the gendisk associated with the namespace to read only based on the identify namespace nsattr field. Signed-off-by:
-
Chaitanya Kulkarni authored
Add various definitions from NVMe 1.3 TP 4005. Signed-off-by:
-
Hannes Reinecke authored
ANA Phase 3 draft had the 'reserved' field in the group descriptor format set to '23:17' (so that the first namespace identifier started at byte 24), but that got move with the approved TP to '31:17' (so that the first namespace identifier started at byte 32). Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
- 07 Aug, 2018 4 commits
-
-
Bart Van Assche authored
This patch does not change any functionality but avoids that gcc reports the following warnings when building with W=1: block/cfq-iosched.c: In function ?cfq_back_seek_max_store?: block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/cfq-iosched.c:4756:1: note: in expansion of macro ?STORE_FUNCTION? STORE_FUNCTION(cfq_back_seek_max_store, &cfqd->cfq_back_max, 0, UINT_MAX, 0); ^~~~~~~~~~~~~~ block/cfq-iosched.c: In function ?cfq_slice_idle_store?: block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/cfq-iosched.c:4759:1: note: in expansion of macro ?STORE_FUNCTION? STORE_FUNCTION(cfq_slice_idle_store, &cfqd->cfq_slice_idle, 0, UINT_MAX, 1); ^~~~~~~~~~~~~~ block/cfq-iosched.c: In function ?cfq_group_idle_store?: block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/cfq-iosched.c:4760:1: note: in expansion of macro ?STORE_FUNCTION? STORE_FUNCTION(cfq_group_idle_store, &cfqd->cfq_group_idle, 0, UINT_MAX, 1); ^~~~~~~~~~~~~~ block/cfq-iosched.c: In function ?cfq_low_latency_store?: block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/cfq-iosched.c:4765:1: note: in expansion of macro ?STORE_FUNCTION? STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0); ^~~~~~~~~~~~~~ block/cfq-iosched.c: In function ?cfq_slice_idle_us_store?: block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/cfq-iosched.c:4782:1: note: in expansion of macro ?USEC_STORE_FUNCTION? USEC_STORE_FUNCTION(cfq_slice_idle_us_store, &cfqd->cfq_slice_idle, 0, UINT_MAX); ^~~~~~~~~~~~~~~~~~~ block/cfq-iosched.c: In function ?cfq_group_idle_us_store?: block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/cfq-iosched.c:4783:1: note: in expansion of macro ?USEC_STORE_FUNCTION? USEC_STORE_FUNCTION(cfq_group_idle_us_store, &cfqd->cfq_group_idle, 0, UINT_MAX); ^~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Bart Van Assche authored
This patch avoids that gcc complains about fall-through when building with W=1. Signed-off-by:
-
Anchal Agarwal authored
I am currently running a large bare metal instance (i3.metal) on EC2 with 72 cores, 512GB of RAM and NVME drives, with a 4.18 kernel. I have a workload that simulates a database workload and I am running into lockup issues when writeback throttling is enabled,with the hung task detector also kicking in. Crash dumps show that most CPUs (up to 50 of them) are all trying to get the wbt wait queue lock while trying to add themselves to it in __wbt_wait (see stack traces below). [ 0.948118] CPU: 45 PID: 0 Comm: swapper/45 Not tainted 4.14.51-62.38.amzn1.x86_64 #1 [ 0.948119] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017 [ 0.948120] task: ffff883f7878c000 task.stack: ffffc9000c69c000 [ 0.948124] RIP: 0010:native_queued_spin_lock_slowpath+0xf8/0x1a0 [ 0.948125] RSP: 0018:ffff883f7fcc3dc8 EFLAGS: 00000046 [ 0.948126] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7fce2a00 [ 0.948128] RDX: 000000000000001c RSI: 0000000000740001 RDI: ffff887f7709ca68 [ 0.948129] RBP: 0000000000000002 R08: 0000000000b80000 R09: 0000000000000000 [ 0.948130] R10: ffff883f7fcc3d78 R11: 000000000de27121 R12: 0000000000000002 [ 0.948131] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 [ 0.948132] FS: 0000000000000000(0000) GS:ffff883f7fcc0000(0000) knlGS:0000000000000000 [ 0.948134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.948135] CR2: 000000c424c77000 CR3: 0000000002010005 CR4: 00000000003606e0 [ 0.948136] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.948137] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.948138] Call Trace: [ 0.948139] <IRQ> [ 0.948142] do_raw_spin_lock+0xad/0xc0 [ 0.948145] _raw_spin_lock_irqsave+0x44/0x4b [ 0.948149] ? __wake_up_common_lock+0x53/0x90 [ 0.948150] __wake_up_common_lock+0x53/0x90 [ 0.948155] wbt_done+0x7b/0xa0 [ 0.948158] blk_mq_free_request+0xb7/0x110 [ 0.948161] __blk_mq_complete_request+0xcb/0x140 [ 0.948166] nvme_process_cq+0xce/0x1a0 [nvme] [ 0.948169] nvme_irq+0x23/0x50 [nvme] [ 0.948173] __handle_irq_event_percpu+0x46/0x300 [ 0.948176] handle_irq_event_percpu+0x20/0x50 [ 0.948179] handle_irq_event+0x34/0x60 [ 0.948181] handle_edge_irq+0x77/0x190 [ 0.948185] handle_irq+0xaf/0x120 [ 0.948188] do_IRQ+0x53/0x110 [ 0.948191] common_interrupt+0x87/0x87 [ 0.948192] </IRQ> .... [ 0.311136] CPU: 4 PID: 9737 Comm: run_linux_amd64 Not tainted 4.14.51-62.38.amzn1.x86_64 #1 [ 0.311137] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017 [ 0.311138] task: ffff883f6e6a8000 task.stack: ffffc9000f1ec000 [ 0.311141] RIP: 0010:native_queued_spin_lock_slowpath+0xf5/0x1a0 [ 0.311142] RSP: 0018:ffffc9000f1efa28 EFLAGS: 00000046 [ 0.311144] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7f722a00 [ 0.311145] RDX: 0000000000000035 RSI: 0000000000d80001 RDI: ffff887f7709ca68 [ 0.311146] RBP: 0000000000000202 R08: 0000000000140000 R09: 0000000000000000 [ 0.311147] R10: ffffc9000f1ef9d8 R11: 000000001a249fa0 R12: ffff887f7709ca68 [ 0.311148] R13: ffffc9000f1efad0 R14: 0000000000000000 R15: ffff887f7709ca00 [ 0.311149] FS: 000000c423f30090(0000) GS:ffff883f7f700000(0000) knlGS:0000000000000000 [ 0.311150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.311151] CR2: 00007feefcea4000 CR3: 0000007f7016e001 CR4: 00000000003606e0 [ 0.311152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.311153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.311154] Call Trace: [ 0.311157] do_raw_spin_lock+0xad/0xc0 [ 0.311160] _raw_spin_lock_irqsave+0x44/0x4b [ 0.311162] ? prepare_to_wait_exclusive+0x28/0xb0 [ 0.311164] prepare_to_wait_exclusive+0x28/0xb0 [ 0.311167] wbt_wait+0x127/0x330 [ 0.311169] ? finish_wait+0x80/0x80 [ 0.311172] ? generic_make_request+0xda/0x3b0 [ 0.311174] blk_mq_make_request+0xd6/0x7b0 [ 0.311176] ? blk_queue_enter+0x24/0x260 [ 0.311178] ? generic_make_request+0xda/0x3b0 [ 0.311181] generic_make_request+0x10c/0x3b0 [ 0.311183] ? submit_bio+0x5c/0x110 [ 0.311185] submit_bio+0x5c/0x110 [ 0.311197] ? __ext4_journal_stop+0x36/0xa0 [ext4] [ 0.311210] ext4_io_submit+0x48/0x60 [ext4] [ 0.311222] ext4_writepages+0x810/0x11f0 [ext4] [ 0.311229] ? do_writepages+0x3c/0xd0 [ 0.311239] ? ext4_mark_inode_dirty+0x260/0x260 [ext4] [ 0.311240] do_writepages+0x3c/0xd0 [ 0.311243] ? _raw_spin_unlock+0x24/0x30 [ 0.311245] ? wbc_attach_and_unlock_inode+0x165/0x280 [ 0.311248] ? __filemap_fdatawrite_range+0xa3/0xe0 [ 0.311250] __filemap_fdatawrite_range+0xa3/0xe0 [ 0.311253] file_write_and_wait_range+0x34/0x90 [ 0.311264] ext4_sync_file+0x151/0x500 [ext4] [ 0.311267] do_fsync+0x38/0x60 [ 0.311270] SyS_fsync+0xc/0x10 [ 0.311272] do_syscall_64+0x6f/0x170 [ 0.311274] entry_SYSCALL_64_after_hwframe+0x42/0xb7 In the original patch, wbt_done is waking up all the exclusive processes in the wait queue, which can cause a thundering herd if there is a large number of writer threads in the queue. The original intention of the code seems to be to wake up one thread only however, it uses wake_up_all() in __wbt_done(), and then uses the following check in __wbt_wait to have only one thread actually get out of the wait loop: if (waitqueue_active(&rqw->wait) && rqw->wait.head.next != &wait->entry) return false; The problem with this is that the wait entry in wbt_wait is define with DEFINE_WAIT, which uses the autoremove wakeup function. That means that the above check is invalid - the wait entry will have been removed from the queue already by the time we hit the check in the loop. Secondly, auto-removing the wait entries also means that the wait queue essentially gets reordered "randomly" (e.g. threads re-add themselves in the order they got to run after being woken up). Additionally, new requests entering wbt_wait might overtake requests that were queued earlier, because the wait queue will be (temporarily) empty after the wake_up_all, so the waitqueue_active check will not stop them. This can cause certain threads to starve under high load. The fix is to leave the woken up requests in the queue and remove them in finish_wait() once the current thread breaks out of the wait loop in __wbt_wait. This will ensure new requests always end up at the back of the queue, and they won't overtake requests that are already in the wait queue. With that change, the loop in wbt_wait is also in line with many other wait loops in the kernel. Waking up just one thread drastically reduces lock contention, as does moving the wait queue add/remove out of the loop. A significant drop in lockdep's lock contention numbers is seen when running the test application on the patched kernel. Signed-off-by:Anchal Agarwal <anchalag@amazon.com> Signed-off-by:
Frank van der Linden <fllinden@amazon.com> Signed-off-by:
-
Christoph Hellwig authored
The target loopback driver is a low-level driver for the SCSI subsystem, and as such needs to depend on it. Fixes: 8a39a047 ("target: don't depend on SCSI") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
