- 12 Apr, 2017 40 commits
-
-
Chen-Yu Tsai authored
commit 49c440e8 upstream. The A31's display pipeline has 2 frontends, 2 backends, and 2 TCONs. It also has new display enhancement blocks, such as the DRC (Dynamic Range Controller), the DEU (Display Enhancement Unit), and the CMU (Color Management Unit). It supports HDMI, MIPI DSI, and 2 LCD/LVDS channels. The A31s display pipeline is almost the same, just without MIPI DSI. Only the TCON seems to be different, due to the missing mux for MIPI DSI. Add compatible strings for both of them. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen-Yu Tsai authored
commit 91ea2f29 upstream. We already have some differences between the 2 supported SoCs. More will be added as we support other SoCs. To avoid bloating the probe function with even more conditionals, move the quirks to a separate data structure that's tied to the compatible string. Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit f5b98461 upstream. Now that our crng uses chacha20, we can rely on its speedy characteristics for replacing MD5, while simultaneously achieving a higher security guarantee. Before the idea was to use these functions if you wanted random integers that aren't stupidly insecure but aren't necessarily secure either, a vague gray zone, that hopefully was "good enough" for its users. With chacha20, we can strengthen this claim, since either we're using an rdrand-like instruction, or we're using the same crng as /dev/urandom. And it's faster than what was before. We could have chosen to replace this with a SipHash-derived function, which might be slightly faster, but at the cost of having yet another RNG construction in the kernel. By moving to chacha20, we have a single RNG to analyze and verify, and we also already get good performance improvements on all platforms. Implementation-wise, rather than use a generic buffer for both get_random_int/long and memcpy based on the size needs, we use a specific buffer for 32-bit reads and for 64-bit reads. This way, we're guaranteed to always have aligned accesses on all platforms. While slightly more verbose in C, the assembly this generates is a lot simpler than otherwise. Finally, on 32-bit platforms where longs and ints are the same size, we simply alias get_random_int to get_random_long. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Suggested-by:
Theodore Ts'o <tytso@mit.edu> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Chris Salls authored
commit cf01fb99 upstream. In the case that compat_get_bitmap fails we do not want to copy the bitmap to the user as it will contain uninitialized stack data and leak sensitive data. Signed-off-by:
Chris Salls <salls@cs.ucsb.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johan Hovold authored
commit cf903e9d upstream. A patch documenting how to specify which kernels a particular fix should be backported to (seemingly) inadvertently added a minus sign after the kernel version. This particular stable-tag format had never been used prior to this patch, and was neither present when the patch in question was first submitted (it was added in v2 without any comment). Drop the minus sign to avoid any confusion. Fixes: fdc81b79 ("stable_kernel_rules: Add clause about specification of kernel versions to patch.") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Huacai Chen authored
commit 0be032c1 upstream. If scache.waysize is 0, r4k___flush_cache_all() will do nothing and then cause bugs. BTW, though vcache.waysize isn't being used by now, we also fix its calculation. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15756/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Huacai Chen authored
commit 0115f6cb upstream. On VTLB+FTLB platforms (such as Loongson-3A R2), FTLB's pagesize is usually configured the same as PAGE_SIZE. In such a case, Huge page entry is not suitable to write in FTLB. Unfortunately, when a huge page is created, its page table entries haven't created immediately. Then the TLB refill handler will fetch an invalid page table entry which has no "HUGE" bit, and this entry may be written to FTLB. Since it is invalid, TLB load/store handler will then use tlbwi to write the valid entry at the same place. However, the valid entry is a huge page entry which isn't suitable for FTLB. Our solution is to modify build_huge_handler_tail. Flush the invalid old entry (whether it is in FTLB or VTLB, this is in order to reduce branches) and use tlbwr to write the valid new entry. Signed-off-by:
Rui Wang <wangr@lemote.com> Signed-off-by:
-
Huacai Chen authored
commit 033cffee upstream. Loongson-3A R2 and newer CPU have FTLB, but Config0.MT is 1, so add MIPS_CPU_FTLB to the CPU options. Signed-off-by:
-
Huacai Chen authored
commit 5a341331 upstream. Loongson-3's micro TLB (ITLB) is not strictly a subset of JTLB. That means: when a JTLB entry is replaced by hardware, there may be an old valid entry exists in ITLB. So, a TLB miss exception may occur while handle_ri_rdhwr() is running because it try to access EPC's content. However, handle_ri_rdhwr() doesn't clear EXL, which makes a TLB Refill exception be treated as a TLB Invalid exception and tlbp may fail. In this case, if FTLB (which is usually set-associative instead of set- associative) is enabled, a tlbp failure will cause an invalid tlbwi, which will hang the whole system. This patch rename handle_ri_rdhwr_vivt to handle_ri_rdhwr_tlbp and use it for Loongson-3. It try to solve the same problem described as below, but more straightforwards. https://patchwork.linux-mips.org/patch/12591/ I think Loongson-2 has the same problem, but it has no FTLB, so we just keep it as is. Signed-off-by:
-
Hauke Mehrtens authored
commit 6ef90877 upstream. Commit 08b3c894 ("MIPS: lantiq: Disable xbar fpi burst mode") accidentally requested the resources from the pmu address region instead of the xbar registers region, but the check for the return value of request_mem_region() was wrong. Commit 98ea51cb ("MIPS: Lantiq: Fix another request_mem_region() return code check") fixed the check of the return value of request_mem_region() which made the kernel panics. This patch now makes use of the correct memory region for the cross bar. Fixes: 08b3c894 ("MIPS: lantiq: Disable xbar fpi burst mode") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org> Cc: james.hogan@imgtec.com Cc: arnd@arndb.de Cc: sergei.shtylyov@cogentembedded.com Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15751Signed-off-by:
-
Paul Burton authored
commit 4b5347a2 upstream. When building for microMIPS we need to ensure that the assembler always knows that there is code at the target of a branch or jump. Recent toolchains will fail to link a microMIPS kernel when this isn't the case due to what it thinks is a branch to non-microMIPS code. mips-mti-linux-gnu-ld kernel/built-in.o: .spinlock.text+0x2fc: Unsupported branch between ISA modes. mips-mti-linux-gnu-ld final link failed: Bad value This is due to inline assembly labels in spinlock.h not being followed by an instruction mnemonic, either due to a .subsection pseudo-op or the end of the inline asm block. Fix this with a .insn direction after such labels. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Reviewed-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15325/Signed-off-by:
-
John Crispin authored
commit 7c5a3d81 upstream. There are two copy & paste errors in the definition of the 5GHz LNA and second ethernet pinmux. Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data") Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15328/Signed-off-by:
-
James Hogan authored
commit 2e6c7747 upstream. When a 32-bit kernel is configured to support MIPS64r6 (CPU_MIPS64_R6), MIPS_O32_FP64_SUPPORT won't be selected as it should be because MIPS32_O32 is disabled (o32 is already the default ABI available on 32-bit kernels). This results in userland FP breakage as CP0_Status.FR is read-only 1 since r6 (when an FPU is present) so __enable_fpu() will fail to clear FR. This causes the FPU emulator to get used which will incorrectly emulate 32-bit FPU registers. Force o32 fp64 support in this case by also selecting MIPS_O32_FP64_SUPPORT from CPU_MIPS64_R6 if 32BIT. Fixes: 4e9d324d ("MIPS: Require O32 FP64 support for MIPS64 with O32 compat") Signed-off-by:
-
Heiko Carstens authored
commit d09c5373 upstream. Commit fd2d2b19 ("s390: get_user() should zero on failure") intended to fix s390's get_user() implementation which did not zero the target operand if the read from user space faulted. Unfortunately the patch has no effect: the corresponding inline assembly specifies that the operand is only written to ("=") and the previous value is discarded. Therefore the compiler is free to and actually does omit the zero initialization. To fix this simply change the contraint modifier to "+", so the compiler cannot omit the initialization anymore. Fixes: c9ca7841 ("s390/uaccess: provide inline variants of get_user/put_user") Fixes: fd2d2b19 ("s390: get_user() should zero on failure") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Marcelo Henrique Cerri authored
commit d82c0d12 upstream. Reorder the operations in decompress_kernel() to ensure initrd is moved to a safe location before the bss section is zeroed. During decompression bss can overlap with the initrd and this can corrupt the initrd contents depending on the size of the compressed kernel (which affects where the initrd is placed by the bootloader) and the size of the bss section of the decompressor. Also use the correct initrd size when checking for overlaps with parmblock. Fixes: 06c0dd72 ([S390] fix boot failures with compressed kernels) Reviewed-by:
Joy Latten <joy.latten@canonical.com> Reviewed-by:
Vineetha HariPai <vineetha.hari.pai@canonical.com> Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
Max Filippov authored
commit 2b83878d upstream. When __pa is applied to virtual address in uncached KSEG region the result is incorrect. Fix it by checking if the original address is in the uncached KSEG and adjusting the result. It looks better than masking off bits because pfn_valid would correctly work with new __pa results and it may be made working in noMMU case, once we get definition for uncached memory view. This is required for the dma_common_mmap and DMA debug code to work correctly: they both indirectly use __pa with coherent DMA addresses. In case of DMA debug the visible effect is false reports that an address mapped for DMA is accessed by CPU. Tested-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Tobias Klauser authored
commit 921d701e upstream. Make sure to reserve the boot memory for the flattened device tree. Otherwise it might get overwritten, e.g. when initial_boot_params is copied, leading to a corrupted FDT and a boot hang/crash: bootconsole [early0] enabled Early console on uart16650 initialized at 0xf8001600 OF: fdt: Error -11 processing FDT Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree! ---[ end Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree! Guenter Roeck says: > I think I found the problem. In unflatten_and_copy_device_tree(), with added > debug information: > > OF: fdt: initial_boot_params=c861e400, dt=c861f000 size=28874 (0x70ca) > > ... and then initial_boot_params is copied to dt, which results in corrupted > fdt since the memory overlaps. Looks like the initial_boot_params memory > is not reserved and (re-)allocated by early_init_dt_alloc_memory_arch(). Reported-by:
Guenter Roeck <linux@roeck-us.net> Reference: http://lkml.kernel.org/r/20170226210338.GA19476@roeck-us.netTested-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by:
-
Dmitry Bilunov authored
commit 7a0c5c5b upstream. Commit 4257e085 ("dm raid: support to change bitmap region size") introduced a bitmap resize call during preresume phase. User can create a DM device with "raid" target configured as raid1 with no metadata devices to hold superblock/bitmap info. It can be achieved using the following sequence: truncate -s 32M /dev/shm/raid-test LOOP=$(losetup --show -f /dev/shm/raid-test) dmsetup create raid-test-linear0 --table "0 1024 linear $LOOP 0" dmsetup create raid-test-linear1 --table "0 1024 linear $LOOP 1024" dmsetup create raid-test --table "0 1024 raid raid1 1 2048 2 - /dev/mapper/raid-test-linear0 - /dev/mapper/raid-test-linear1" This results in the following crash: [ 4029.110216] device-mapper: raid: Ignoring chunk size parameter for RAID 1 [ 4029.110217] device-mapper: raid: Choosing default region size of 4MiB [ 4029.111349] md/raid1:mdX: active with 2 out of 2 mirrors [ 4029.114770] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 4029.114802] IP: bitmap_resize+0x25/0x7c0 [md_mod] [ 4029.114816] PGD 0 … [ 4029.115059] Hardware name: Aquarius Pro P30 S85 BUY-866/B85M-E, BIOS 2304 05/25/2015 [ 4029.115079] task: ffff88015cc29a80 task.stack: ffffc90001a5c000 [ 4029.115097] RIP: 0010:bitmap_resize+0x25/0x7c0 [md_mod] [ 4029.115112] RSP: 0018:ffffc90001a5fb68 EFLAGS: 00010246 [ 4029.115127] RAX: 0000000000000005 RBX: 0000000000000000 RCX: 0000000000000000 [ 4029.115146] RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000000 [ 4029.115166] RBP: ffffc90001a5fc28 R08: 0000000800000000 R09: 00000008ffffffff [ 4029.115185] R10: ffffea0005661600 R11: ffff88015cc29a80 R12: ffff88021231f058 [ 4029.115204] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4029.115223] FS: 00007fe73a6b4740(0000) GS:ffff88021ea80000(0000) knlGS:0000000000000000 [ 4029.115245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4029.115261] CR2: 0000000000000030 CR3: 0000000159a74000 CR4: 00000000001426e0 [ 4029.115281] Call Trace: [ 4029.115291] ? raid_iterate_devices+0x63/0x80 [dm_raid] [ 4029.115309] ? dm_table_all_devices_attribute.isra.23+0x41/0x70 [dm_mod] [ 4029.115329] ? dm_table_set_restrictions+0x225/0x2d0 [dm_mod] [ 4029.115346] raid_preresume+0x81/0x2e0 [dm_raid] [ 4029.115361] dm_table_resume_targets+0x47/0xe0 [dm_mod] [ 4029.115378] dm_resume+0xa8/0xd0 [dm_mod] [ 4029.115391] dev_suspend+0x123/0x250 [dm_mod] [ 4029.115405] ? table_load+0x350/0x350 [dm_mod] [ 4029.115419] ctl_ioctl+0x1c2/0x490 [dm_mod] [ 4029.115433] dm_ctl_ioctl+0xe/0x20 [dm_mod] [ 4029.115447] do_vfs_ioctl+0x8d/0x5a0 [ 4029.115459] ? ____fput+0x9/0x10 [ 4029.115470] ? task_work_run+0x79/0xa0 [ 4029.115481] SyS_ioctl+0x3c/0x70 [ 4029.115493] entry_SYSCALL_64_fastpath+0x13/0x94 The raid_preresume() function incorrectly assumes that the raid_set has a bitmap enabled if RT_FLAG_RS_BITMAP_LOADED is set. But RT_FLAG_RS_BITMAP_LOADED is getting set in __load_dirty_region_bitmap() even if there is no bitmap present (and bitmap_load() happily returns 0 even if a bitmap isn't present). So the only way forward in the near-term is to check if the bitmap is present by seeing if mddev->bitmap is not NULL after bitmap_load() has been called. By doing so the above NULL pointer is avoided. Fixes: 4257e085 ("dm raid: support to change bitmap region size") Signed-off-by:
Dmitry Bilunov <kmeaw@yandex-team.ru> Signed-off-by:
Andrey Smetanin <asmetanin@yandex-team.ru> Acked-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Michael Ellerman authored
commit 4749228f upstream. In crc32c_vpmsum() we call enable_kernel_altivec() without first disabling preemption, which is not allowed: WARNING: CPU: 9 PID: 2949 at ../arch/powerpc/kernel/process.c:277 enable_kernel_altivec+0x100/0x120 Modules linked in: dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c vmx_crypto ... CPU: 9 PID: 2949 Comm: docker Not tainted 4.11.0-rc5-compiler_gcc-6.3.1-00033-g308ac756 #381 ... NIP [c00000000001e320] enable_kernel_altivec+0x100/0x120 LR [d000000003df0910] crc32c_vpmsum+0x108/0x150 [crc32c_vpmsum] Call Trace: 0xc138fd09 (unreliable) crc32c_vpmsum+0x108/0x150 [crc32c_vpmsum] crc32c_vpmsum_update+0x3c/0x60 [crc32c_vpmsum] crypto_shash_update+0x88/0x1c0 crc32c+0x64/0x90 [libcrc32c] dm_bm_checksum+0x48/0x80 [dm_persistent_data] sb_check+0x84/0x120 [dm_thin_pool] dm_bm_validate_buffer.isra.0+0xc0/0x1b0 [dm_persistent_data] dm_bm_read_lock+0x80/0xf0 [dm_persistent_data] __create_persistent_data_objects+0x16c/0x810 [dm_thin_pool] dm_pool_metadata_open+0xb0/0x1a0 [dm_thin_pool] pool_ctr+0x4cc/0xb60 [dm_thin_pool] dm_table_add_target+0x16c/0x3c0 table_load+0x184/0x400 ctl_ioctl+0x2f0/0x560 dm_ctl_ioctl+0x38/0x50 do_vfs_ioctl+0xd8/0x920 SyS_ioctl+0x68/0xc0 system_call+0x38/0xfc It used to be sufficient just to call pagefault_disable(), because that also disabled preemption. But the two were decoupled in commit 8222dbe2 ("sched/preempt, mm/fault: Decouple preemption from the page fault logic") in mid 2015. So add the missing preempt_disable/enable(). We should also call disable_kernel_fp(), although it does nothing by default, there is a debug switch to make it active and all enables should be paired with disables. Fixes: 6dd7a82c ("crypto: powerpc - Add POWER8 optimised crc32c") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Paul Mackerras authored
commit 48fe9e94 upstream. In the past, there was only one load-with-reservation instruction, lwarx, and if a program attempted a lwarx on a misaligned address, it would take an alignment interrupt and the kernel handler would emulate it as though it was lwzx, which was not really correct, but benign since it is loading the right amount of data, and the lwarx should be paired with a stwcx. to the same address, which would also cause an alignment interrupt which would result in a SIGBUS being delivered to the process. We now have 5 different sizes of load-with-reservation instruction. Of those, lharx and ldarx cause an immediate SIGBUS by luck since their entries in aligninfo[] overlap instructions which were not fixed up, but lqarx overlaps with lhz and will be emulated as such. lbarx can never generate an alignment interrupt since it only operates on 1 byte. To straighten this out and fix the lqarx case, this adds code to detect the l[hwdq]arx instructions and return without fixing them up, resulting in a SIGBUS being delivered to the process. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Oliver O'Halloran authored
commit 8f5f525d upstream. When the kernel is compiled to use 64bit ABIv2 the _GLOBAL() macro does not include a global entry point. A function's global entry point is used when the function is called from a different TOC context and in the kernel this typically means a call from a module into the vmlinux (or vice-versa). There are a few exported asm functions declared with _GLOBAL() and calling them from a module will likely crash the kernel since any TOC relative load will yield garbage. flush_icache_range() and flush_dcache_range() are both exported to modules, and use the TOC, so must use _GLOBAL_TOC(). Fixes: 721aeaa9 ("powerpc: Build little endian ppc64 kernel with ABIv2") Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Frederic Barrat authored
commit 88b1bf72 upstream. Commit 4c6d9acc ("powerpc/mm: Add hooks for cxl") converted local TLB invalidates to global if the cxl driver is active. This is necessary because the CAPP snoops invalidations to forward them to the PSL on the cxl adapter. However one path was forgotten. native_flush_hash_range() still does local TLB invalidates, as found out the hard way recently. This patch fixes it by following the same logic as previously: if the cxl driver is active, the local TLB invalidates are 'upgraded' to global. Fixes: 4c6d9acc ("powerpc/mm: Add hooks for cxl") Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 7ed23e1b upstream. On Power8 & Power9 the early CPU inititialisation in __init_HFSCR() turns on HFSCR[TM] (Hypervisor Facility Status and Control Register [Transactional Memory]), but that doesn't take into account that TM might be disabled by CPU features, or disabled by the kernel being built with CONFIG_PPC_TRANSACTIONAL_MEM=n. So later in boot, when we have setup the CPU features, clear HSCR[TM] if the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account for the CONFIG_PPC_TRANSACTIONAL_MEM=n case. Without this a KVM guest might try use TM, even if told not to, and cause an oops in the host kernel. Typically the oops is seen in __kvmppc_vcore_entry() and may or may not be fatal to the host, but is always bad news. In practice all shipping CPU revisions do support TM, and all host kernels we are aware of build with TM support enabled, so no one should actually be able to hit this in the wild. Fixes: 2a3563b0 ("powerpc: Setup in HFSCR for POWER8") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Rewrite change log with input from Sam, add Fixes/stable] Signed-off-by:
-
James Hogan authored
commit b884a190 upstream. The rapf copy loops in the Meta usercopy code is missing some extable entries for HTP cores with unaligned access checking enabled, where faults occur on the instruction immediately after the faulting access. Add the fixup labels and extable entries for these cases so that corner case user copy failures don't cause kernel crashes. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
commit 2c0b1df8 upstream. The fixup code to rewind the source pointer in __asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by a single unit (4 or 8 bytes), however this is insufficient if the fault didn't occur on the first load in the loop, as the source pointer will have been incremented but nothing will have been stored until all 4 register [pairs] are loaded. Read the LSM_STEP field of TXSTATUS (which is already loaded into a register), a bit like the copy_to_user versions, to determine how many iterations of MGET[DL] have taken place, all of which need rewinding. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
commit fd40eee1 upstream. The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP to decide how far to rewind the source pointer. There is a special case for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0 even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ which is conditional upon the Z condition flag, but the AND instruction which masked the TXStatus.LSM_STEP field didn't set the condition flags based on the result. Fix that now by using ANDS which does set the flags, and also marking the condition codes as clobbered by the inline assembly. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
commit 563ddc10 upstream. Currently we try to zero the destination for a failed read from userland in fixup code in the usercopy.c macros. The rest of the destination buffer is then zeroed from __copy_user_zeroing(), which is used for both copy_from_user() and __copy_from_user(). Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0 before the fixup code entry labels, and __copy_from_user() shouldn't even be zeroing the rest of the buffer. Move the zeroing out into copy_from_user() and rename __copy_user_zeroing() to raw_copy_from_user() since it no longer does any zeroing. This also conveniently matches the name needed for RAW_COPY_USER support in a later patch. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Hogan authored
commit fb8ea062 upstream. When copying to userland on Meta, if any faults are encountered immediately abort the copy instead of continuing on and repeatedly faulting, and worse potentially copying further bytes successfully to subsequent valid pages. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
-
James Hogan authored
commit 22572119 upstream. Fix the error checking of the alignment adjustment code in raw_copy_from_user(), which mistakenly considers it safe to skip the error check when aligning the source buffer on a 2 or 4 byte boundary. If the destination buffer was unaligned it may have started to copy using byte or word accesses, which could well be at the start of a new (valid) source page. This would result in it appearing to have copied 1 or 2 bytes at the end of the first (invalid) page rather than none at all. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
commit ef62a2d8 upstream. Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger copies between 5 and 16 bytes which are completely unused. Before fixing zeroing lets drop these macros so there is less to fix. Signed-off-by:
-
Arend Van Spriel authored
commit d77facb8 upstream. A use-after-free was found using KASAN. In brcmf_p2p_del_if() the virtual interface is removed using call to brcmf_remove_interface(). After that the virtual interface instance has been freed and should not be referenced. Solve this by storing the nl80211 iftype in local variable, which is used in a couple of places anyway. Reported-by:
Daniel J Blueman <daniel@quora.org> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johannes Berg authored
commit 7d65f829 upstream. When internal mac80211 TXQs aren't supported, netdev queues must always started out started even when driver queues are stopped while the interface is added. This is necessary because with the internal TXQ support netdev queues are never stopped and packet scheduling/dropping is done in mac80211. Fixes: 80a83cfc ("mac80211: skip netdev queue control with software queuing") Reported-and-tested-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Wei Yongjun authored
commit 62277de7 upstream. In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com Fixes: 6c43e554 ("ring-buffer: Add ring buffer startup selftest") Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Calvin Owens authored
commit 3dd09d5a upstream. When punching past EOF on XFS, fallocate(mode=PUNCH_HOLE|KEEP_SIZE) will round the file size up to the nearest multiple of PAGE_SIZE: calvinow@vm-disks/generic-xfs-1 ~$ dd if=/dev/urandom of=test bs=2048 count=1 calvinow@vm-disks/generic-xfs-1 ~$ stat test Size: 2048 Blocks: 8 IO Block: 4096 regular file calvinow@vm-disks/generic-xfs-1 ~$ fallocate -n -l 2048 -o 2048 -p test calvinow@vm-disks/generic-xfs-1 ~$ stat test Size: 4096 Blocks: 8 IO Block: 4096 regular file Commit 3c2bdc91 ("xfs: kill xfs_zero_remaining_bytes") replaced xfs_zero_remaining_bytes() with calls to iomap helpers. The new helpers don't enforce that [pos,offset) lies strictly on [0,i_size) when being called from xfs_free_file_space(), so by "leaking" these ranges into xfs_zero_range() we get this buggy behavior. Fix this by reintroducing the checks xfs_zero_remaining_bytes() did against i_size at the bottom of xfs_free_file_space(). Reported-by:
Aaron Gao <gzh@fb.com> Fixes: 3c2bdc91 ("xfs: kill xfs_zero_remaining_bytes") Cc: Christoph Hellwig <hch@lst.de> Cc: Brian Foster <bfoster@redhat.com> Signed-off-by:
Calvin Owens <calvinowens@fb.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Martin Brandenburg authored
commit cefdc26e upstream. Without this fix (and another to the userspace component itself described later), the kernel will be unable to process any OrangeFS requests after the userspace component is restarted (due to a crash or at the administrator's behest). The bug here is that inside orangefs_remount, the orangefs_request_mutex is locked. When the userspace component restarts while the filesystem is mounted, it sends a ORANGEFS_DEV_REMOUNT_ALL ioctl to the device, which causes the kernel to send it a few requests aimed at synchronizing the state between the two. While this is happening the orangefs_request_mutex is locked to prevent any other requests going through. This is only half of the bugfix. The other half is in the userspace component which outright ignores(!) requests made before it considers the filesystem remounted, which is after the ioctl returns. Of course the ioctl doesn't return until after the userspace component responds to the request it ignores. The userspace component has been changed to allow ORANGEFS_VFS_OP_FEATURES regardless of the mount status. Mike Marshall says: "I've tested this patch against the fixed userspace part. This patch is real important, I hope it can make it into 4.11... Here's what happens when the userspace daemon is restarted, without the patch: ============================================= [ INFO: possible recursive locking detected ] [ 4.10.0-00007-ge98bdb30 #1 Not tainted ] --------------------------------------------- pvfs2-client-co/29032 is trying to acquire lock: (orangefs_request_mutex){+.+.+.}, at: service_operation+0x3c7/0x7b0 [orangefs] but task is already holding lock: (orangefs_request_mutex){+.+.+.}, at: dispatch_ioctl_command+0x1bf/0x330 [orangefs] CPU: 0 PID: 29032 Comm: pvfs2-client-co Not tainted 4.10.0-00007-ge98bdb30 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014 Call Trace: __lock_acquire+0x7eb/0x1290 lock_acquire+0xe8/0x1d0 mutex_lock_killable_nested+0x6f/0x6e0 service_operation+0x3c7/0x7b0 [orangefs] orangefs_remount+0xea/0x150 [orangefs] dispatch_ioctl_command+0x227/0x330 [orangefs] orangefs_devreq_ioctl+0x29/0x70 [orangefs] do_vfs_ioctl+0xa3/0x6e0 SyS_ioctl+0x79/0x90" Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Acked-by:
Mike Marshall <hubcap@omnibond.com> Signed-off-by:
-
Arnd Bergmann authored
commit b334e19a upstream. In commit a76bcf55 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1""), I reverted another change that happened to fix a problem with old compilers, and now we get this report again with old compilers (prior to gcc-4.8) and GCOV enabled: cc1: warnings being treated as errors drivers/gpu/drm/i915/intel_ringbuffer.c: In function 'intel_ring_setup_status_page': drivers/gpu/drm/i915/intel_ringbuffer.c:438: error: 'mmio.reg' may be used uninitialized in this function At top level: >> cc1: error: unrecognized command line option "-Wno-maybe-uninitialized" The problem is that we turn off the warning conditionally in a number of places as we should, but one of them does it unconditionally. Instead, change it to call cc-disable-warning as we do elsewhere. The original patch that caused it was merged into linux-4.7, then 4.8 removed the change and 4.9 brought it back, so we probably want a backport to 4.9 once this is merged. Use a ':=' assignment instead of '=' to force the cc-disable-warning call to only be evaluated once instead of every time. Fixes: a76bcf55 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"") Fixes: e72e2dfe ("gcov: disable -Wmaybe-uninitialized warning") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 693bdaa1 upstream. If, while locating GPIOs by name, we get probe deferral, we should immediately report it to caller rather than trying to fall back to parsing unnamed GPIOs from _CRS block. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-and-Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sami Tolvanen authored
commit 86e3e83b upstream. Buffers read through dm_bufio_read() were not released in all code paths. Fixes: a739ff3f ("dm verity: add support for forward error correction") Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
-
Sami Tolvanen authored
commit f1a880a9 upstream. If the hash tree itself is sufficiently corrupt in addition to data blocks, it's possible for error correction to end up in a deep recursive loop, which eventually causes a kernel panic. This change limits the recursion to a reasonable level during a single I/O operation. Fixes: a739ff3f ("dm verity: add support for forward error correction") Signed-off-by:
-
bsegall@google.com authored
commit 5402e97a upstream. In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against __TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end of a PTRACE_LISTEN, this can wake the task /after/ the check against __TASK_TRACED, but before the reset of state to TASK_TRACED. This causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup against TRACED while the task is still on the rq wake_list, corrupting it. Oleg said: "The kernel can crash or this can lead to other hard-to-debug problems. In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced() assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the contract. Obviusly it is very wrong to manipulate task->state if this task is already running, or WAKING, or it sleeps again" [akpm@linux-foundation.org: coding-style fixes] Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL") Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.comSigned-off-by:
Ben Segall <bsegall@google.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
