- 15 Aug, 2017 3 commits
-
-
Tina Zhang authored
Guest i915 full ppgtt functionality was blocking by an issue, which would lead to gpu hardware hang. Guest i915 driver may update the ppgtt table just before this workload is going to be submitted to the hardware by device model. This case wasn't handled well by device model before, due to the small time window between removing old ppgtt entry and adding the new one. Errors occur when the workload is executed by hardware during that small time window. This patch is to remove this time window by adding the new ppgtt entry first and then remove the old one. Changes in v2: - Move VGT_CAPS_FULL_PPGTT introduction to patch 2/4. (Joonas) Changes since v2: - Divide the whole patch set into two separate patch series, with one patch in i915 side to check guest i915 full ppgtt capability and enable it when this capability is supported by the device model, and the other one in gvt side which fixs the blocking issue and enables the device model to provide the capability to guest. And this patch focuses on gvt side. (Joonas) - Change the title from "reorder the shadow ppgtt update process by adding entry first" to "Fix guest i915 full ppgtt blocking issue". (Tina) Changes since v3: - Rebase to the latest branch. Changes since v4: - Tested by Tina Zhang. Changes since v5: - Rebase to the latest branch. v6: - Update full 48bit ppgtt definition Cc: Tina Zhang <tina.zhang@intel.com> Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Tina Zhang authored
Enable the guest i915 full ppgtt functionality when host can provide this capability. vgt_caps is introduced to guest i915 driver to get the vgpu capabilities from the device model. VGT_CPAS_FULL_PPGTT is one of the capabilities type to let guest i915 dirver know that the guest i915 full ppgtt is supported by device model. Notice that the minor version of pvinfo isn't bumped because of this vgt_caps introduction, due to older guest would be broken by simply increasing the pvinfo version. Although the pvinfo minor version doesn't increase, the compatibility won't be blocked. The compatibility is ensured by checking the value of caps field in pvinfo. Zero means no full ppgtt support and BIT(2) means this feature is provided. Changes since v1: - Use u32 instead of uint32_t (Joonas) - Move VGT_CAPS_FULL_PPGTT introduction to this patch and use #define instead of enum (Joonas) - Rewrite the vgpu full ppgtt capability checking logic. (Joonas) - Some coding style refine. (Joonas) Changes since v2: - Divide the whole patch set into two separate patch series, with one patch in i915 side to check guest i915 full ppgtt capability and enable it when this capability is supported by the device model, and the other one in gvt side which fixs the blocking issue and enables the device model to provide the capability to guest. And this patch focuses on guest i915 side. (Joonas) - Change the title from "introduce vgt_caps to pvinfo" to "Enable guest i915 full ppgtt functionality". (Tina) Change since v3: - Add some comments about pvinfo caps and version. (Joonas) Change since v4: - Tested by Tina Zhang. Change since v5: - Add limitation about supporting 32bit full ppgtt. Change since v6: - Change the fallback to 48bit full ppgtt if i915.ppgtt_enable=2. (Zhenyu) Change in v9: - Remove the fixme comment due to no plan for 32bit full ppgtt support. (Zhenyu) - Reorder the patch-set to fix compiling issue with git-bisect. (Zhenyu) - Add print log when forcing guest 48bit full ppgtt. (Zhenyu) v10: - Update against Joonas's has_full_ppgtt and has_full_48bit_ppgtt disconnect change. (Zhenyu) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> # in v2 Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tina Zhang <tina.zhang@intel.com> Signed-off-by:
-
Joonas Lahtinen authored
Configurations like virtualized environments may support only 48 bit ppGTT without supporting 32 bit ppGTT. Support this by disconnecting the relationship of the two feature bits. Cc: Tina Zhang <tina.zhang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
- 10 Aug, 2017 13 commits
-
-
Kechen Lu authored
The current context logic only updates the descriptor of context when it's being pinned to graphics memory space. But this cannot satisfy the requirement of shadow context. The addressing mode of the pinned shadow context descriptor may be changed according to the guest addressing mode. And this won't be updated, as the already pinned shadow context has no chance to update its descriptor. And this will lead to GPU hang issue, as shadow context is used with wrong descriptor. This patch fixes this issue by letting the pinned shadow context descriptor update its addressing mode on demand. This patch fixes GPU HANG issue which happends after changing the grub parameter i915.enable_ppgtt form 0x01 to 0x03 or vice versa and then rebooting the guest. Signed-off-by:
Kechen Lu <kechen.lu@intel.com> Signed-off-by:
-
Zhenyu Wang authored
This exposes vGPU context hw id in mdev sysfs which is used to do vGPU based profiling. Retrieved vGPU context hw id can be set through i915 perf ioctl to set profiling for target vGPU. Cc: Jiao Pengyuan <pengyuan.jiao@intel.com> Cc: Niu Bing <bing.niu@intel.com> Signed-off-by: -
Chuanxiao Dong authored
When doing the VGPU reset, we don't need to do the gtt/ppgtt reset. This will make the GVT to do the ppgtt shadow every time for a workload and caused really bad performance after a VGPU reset. This patch will make sure ppgtt clean only happen at device module level reset to fix this. Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by:
-
Changbin Du authored
When debugging the gtt code, found the intel_vgpu_gma_to_gpa() can translate any given GMA though the GMA is not valid. This because the GTT ops suppress the possible errors, which may result in an invalid PT entry is retrieved by upper caller. This patch changed the prototype of pte ops to propagate status to callers. Then we make sure the GTT walker stop as early as when a error is detected to prevent undefined behavior. Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
-
Jian Jun Chen authored
Remove duplicated MMIO entries in the tracked MMIO list. -EEXIST is returned if duplicated MMIO entries are found when new MMIO entry is added. v2: - Use WARN(1, ...) for more verbose message. (Zhenyu) Signed-off-by:
Jian Jun Chen <jian.jun.chen@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
Yulei Zhang <yulei.zhang@intel.com> Signed-off-by:
-
Zhenyu Wang authored
Need to take runtime pm when do early scan/shadow of workload for request operations. Fixes: 7fa56bd159bc ("drm/i915/gvt: Audit and shadow workload during ELSP writing") Cc: Ping Gao <ping.a.gao@intel.com> Signed-off-by: -
Ping Gao authored
Use the exist function intel_gvt_ggtt_validate_range to replace these duplicated code that do the same thing. Signed-off-by:
Ping Gao <ping.a.gao@intel.com> Signed-off-by:
-
Ping Gao authored
The function workload scan and shadow have to hold the drm.struct_mutex before called. To avoid misusing of this function, add a lockdep assert in it. Signed-off-by:
-
Ping Gao authored
Let the workload audit and shadow ahead of vGPU scheduling, that will eliminate GPU idle time and improve performance for multi-VM. The performance of Heaven running simultaneously in 3VMs has improved 20% after this patch. v2:Remove condition current->vgpu==vgpu when shadow during ELSP writing. Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
-
Ping Gao authored
To perform the workload scan and shadow in ELSP writing stage for performance consideration, the workload scan and shadow stuffs should be factored out from dispatch_workload(). v2:Put context pin before i915_add_request; Refine the comments; Rename some APIs; v3:workload->status should set only when error happens. v4:i915_add_request is must to have after i915_gem_request_alloc. Signed-off-by:
-
Changbin Du authored
The I915_READ/WRITE is not only a mmio read/write, it also contains debug checking and Forcewake domain lookup. This is too heavy for GVT ring switch case which access batch of mmio registers on ring switch. We can handle Forcewake manually and use the raw i915_read/write instead. The benefit from this is 2x faster mmio switch performance. Before After cycles ~550000 ~250000 v2: Use existing I915_READ_FW/I915_WRITE_FW macro. (zhenyu) Signed-off-by: -
Changbin Du authored
There are lots of POSTING_READ alongside each mmio write Op. While actually this is not necessary. It just bring too much latency since PCIe read Op is very slow which is of non-posted transaction. For PCIe device, the mem transaction for strong ordering rules are: o PCIe mmio write sequence is FIFO. Posted request cannot pass previous posted request. o PCIe mmio read will not go ahead of previous write. Intel graphics doesn't support RO, so we can apply above rules. In our case, we only need one POSTING_READ at last. This can remove half of mmio read Op and then the average ring switch performance is nearly doubled. Before After cycles ~970000 ~550000 Signed-off-by: -
Chuanxiao Dong authored
It is better to use gvt_err when the gvt resource is not enough so the user can be notified from the kernel dmesg. And this kind of error message is gvt related. Suggested-by:
Bing Niu <bing.niu@intel.com> Signed-off-by:
-
- 31 Jul, 2017 1 commit
-
-
Daniel Vetter authored
Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 28 Jul, 2017 2 commits
-
-
Tvrtko Ursulin authored
Just a simple code cleanup, below commit forgot to remove a function which it made unused: commit eaa14c24 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Oct 19 13:52:03 2016 +0100 drm/i915: Stop reporting error details in dmesg as well as the error-state As we already capture all the information from the registers into the error-state, also dumping that to dmesg just generates noise that upsets CI and users alike (and doesn't provide us with any more information). v2: Chris Wilson dag out the relevant commit. Commit msg updated. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
If we fail at punit communication, include both the mbox address and the value we tried to write so that we can identify the invalid sequence. Signed-off-by:
-
- 27 Jul, 2017 21 commits
-
-
Daniel Vetter authored
The hdmi bits simply don't exist, so nerf them. I think audio doesn't work on gen3 at all, and for the limited color range we should probably use the colorimetry sdvo paramater instead of the bit in the port. But fixing sdvo isn't my goal, I just want to get the backtrace out of the way, and this takes care of that. Still, while at it fix the missing read-out of the gen4 audio bit, maybe that part even works ... v2: Instead of trying to plug the damage in ->compute_config() make sure we never set intel_sdvo->is_hdmi, which stops the bad state at the source. Suggested by Chris Wilson. Also make sure we don't break this by accident by putting a WARN_ON in place. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170726193251.25393-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
lockdep complaints about a locking recursion for the i2c bus lock because both the sdvo ddc proxy bus and the gmbus nested within use the same locking class. It's not really a deadlock since we never nest the other way round, but it's annoying. Fix it by pulling the gmbus locking into the i2c lock_ops for both i2c_adapater and making sure that the ddc_proxy_xfer function is entirely lockless. Re-layouting the extracted function resulted in some whitespace cleanups, I figured we might as well keep them. v2: Review from Chris: - s/locked/unlocked/ since I got the naming backwards - Use the vfuncs of the proxied adatper instead of re-rolling copies. That's more consistent with the other proxying we're doing. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
When we hold for the lock for swapping out the shmem pages for the physically contiguous pages, we have to call the unlocked version of get_pages! Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101934 Fixes: 35d23516946e ("drm/i915: Make i915_gem_object_phys_attach() use obj->mm.lock more appropriately") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
-
Chris Wilson authored
Prevent a forward declaration in the next patch. Signed-off-by:
-
Chris Wilson authored
Since we don't need the struct_mutex to acquire the object's pages, call i915_gem_object_pin_pages() before we bind the object into the GGTT. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170726160038.29487-3-chris@chris-wilson.co.ukSigned-off-by:
-
Chris Wilson authored
Actually transferring from shmemfs to the physically contiguous set of pages should be wholly guarded by its obj->mm.lock! v2: Remember to free the old pages. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170726160038.29487-2-chris@chris-wilson.co.ukSigned-off-by:
-
Chris Wilson authored
Reduce acquisition of struct_mutex to the critical regions that must hold it; for KMS, we need struct_mutex currently only for the purpose of pinning/unpinning the framebuffer's VMA into the global GTT. This allows us to avoid taking the struct_mutex when disabling the CRTC (i.e. NULL framebuffer objects) before a reset. (Not yet achieving the full goal of avoiding the strut_mutex nesting, but good enough to break the first half of the reset deadlock.) v2: Keep pages pinning inside struct_mutex for the moment. Signed-off-by:
-
Gabriel Krisman Bertazi authored
When reading the i915_energy_uJ debugfs file, it tries to fetch MSR_RAPL_POWER_UNIT, which might not be available, like in a vm environment, causing the exception shown below. We can easily prevent it by doing a rdmsrl_safe read instead, which will handle the exception, allowing us to abort the debugfs file read. This was caught by the new igt@debugfs_test@read_all_entries testcase in the CI. unchecked MSR access error: RDMSR from 0x606 at rIP:0xffffffffa0078f66 (i915_energy_uJ+0x36/0xb0 [i915]) Call Trace: seq_read+0xdc/0x3a0 full_proxy_read+0x4f/0x70 __vfs_read+0x23/0x120 ? putname+0x4f/0x60 ? rcu_read_lock_sched_held+0x75/0x80 ? entry_SYSCALL_64_fastpath+0x5/0xb1 vfs_read+0xa0/0x150 SyS_read+0x44/0xb0 entry_SYSCALL_64_fastpath+0x1c/0xb1 RIP: 0033:0x7f1f5e9f4500 RSP: 002b:00007ffc77e65cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: ffffffff8146e003 RCX: 00007f1f5e9f4500 RDX: 0000000000000200 RSI: 00007ffc77e65d10 RDI: 0000000000000006 RBP: ffffc900007abf88 R08: 0000000001eaff20 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000006 R14: 0000000000000005 R15: 0000000001eb94db ? __this_cpu_preempt_check+0x13/0x20 v2: - Drop unsigned long long cast and improve calculation (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101901Signed-off-by:Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/87o9s7zrx3.fsf@dilma.collabora.co.ukReviewed-by:
-
Chris Wilson authored
The goal here was to minimise doing any thing or any check inside the kernel that was not strictly required. For a userspace that assumes complete control over the cache domains, the kernel is usually using outdated information and may trigger clflushes where none were required. However, swapping is a situation where userspace has no knowledge of the domain transfer, and will leave the object in the CPU cache. The kernel must flush this out to the backing storage prior to use with the GPU. As we use an asynchronous task tracked by an implicit fence for this, we also need to cancel the ASYNC flag on the object so that the object will wait for the clflush to complete before being executed. This also absolves userspace of the responsibility imposed by commit 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") that its needed to ensure that the object was out of the CPU cache prior to use on the GPU. Fixes: 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101571Signed-off-by:
Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-5-chris@chris-wilson.co.ukReviewed-by:
-
Chris Wilson authored
I was being overly paranoid in not updating the execobject.offset after performing the fallback copy where we set reloc.presumed_offset to -1. The thinking was to ensure that a subsequent NORELOC execbuf would be forced to process the invalid relocations. However this is overkill so long as we *only* update the execobject.offset following a successful update of the relocation value witin the batch. If we have to repeat the execbuf due to a later interruption, then we may skip the relocations on the second pass (honouring NORELOC) since the execobject.offset match the actual offsets (even though reloc.presumed_offset is garbage). Subsequent calls to execbuf with NORELOC should themselves ensure that the reloc.presumed_offset have been corrected in case of future migration. Reporting back the actual execobject.offset, even when reloc.presumed_offset is garbage, ensures that reuse of those objects use the latest information to avoid relocations. Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101635Signed-off-by:
-
Chris Wilson authored
If we fail to acquire a fence (for old school fenced GPU access) then we unwind the vma reservation, including its pin. However, we were making the execobject as holding the pin before erring out, leading to a double unpin: [ 3193.991802] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:287! [ 3193.998131] invalid opcode: 0000 [#1] PREEMPT SMP [ 3194.002816] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me e1000e mei prime_numbers ptp pps_core [last unloaded: i915] [ 3194.022841] CPU: 0 PID: 8123 Comm: kms_flip Tainted: G U 4.13.0-rc1-CI-CI_DRM_471+ #1 [ 3194.031765] Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A04 11/05/2007 [ 3194.040343] task: ffff8800785d4c40 task.stack: ffffc90001768000 [ 3194.046339] RIP: 0010:eb_release_vmas.isra.6+0x119/0x180 [i915] [ 3194.052234] RSP: 0018:ffffc9000176ba80 EFLAGS: 00010246 [ 3194.057439] RAX: 00000000000003c0 RBX: ffff8800710fc2d8 RCX: ffff8800588e4f48 [ 3194.064546] RDX: ffffffff1fffffff RSI: 00000000ffffffff RDI: ffff8800588e00d0 [ 3194.071654] RBP: ffffc9000176bab0 R08: 0000000000000000 R09: 0000000000000000 [ 3194.078761] R10: 0000000000000040 R11: 0000000000000001 R12: ffff880060822f00 [ 3194.085867] R13: 0000000000000310 R14: 00000000000003b8 R15: ffffc9000176bbb0 [ 3194.092975] FS: 00007fd2b94aba40(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000 [ 3194.101033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3194.106754] CR2: 00007ffbec3ff000 CR3: 0000000074e67000 CR4: 00000000000006f0 [ 3194.113861] Call Trace: [ 3194.116321] eb_relocate_slow+0x67/0x4e0 [i915] [ 3194.120861] i915_gem_do_execbuffer+0x429/0x1260 [i915] [ 3194.126070] ? lock_acquire+0xb5/0x210 [ 3194.129803] ? __might_fault+0x39/0x90 [ 3194.133563] i915_gem_execbuffer2+0x9b/0x1b0 [i915] [ 3194.138447] ? i915_gem_execbuffer+0x2b0/0x2b0 [i915] [ 3194.143478] drm_ioctl_kernel+0x64/0xb0 [ 3194.147298] drm_ioctl+0x2cd/0x390 [ 3194.150710] ? i915_gem_execbuffer+0x2b0/0x2b0 [i915] [ 3194.155741] ? finish_task_switch+0xa5/0x210 [ 3194.159993] ? finish_task_switch+0x6a/0x210 [ 3194.164247] do_vfs_ioctl+0x90/0x670 [ 3194.167806] ? entry_SYSCALL_64_fastpath+0x5/0xb1 [ 3194.172492] ? __this_cpu_preempt_check+0x13/0x20 [ 3194.177176] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 3194.181946] SyS_ioctl+0x3c/0x70 [ 3194.185159] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 3194.189756] RIP: 0033:0x7fd2b76a8587 [ 3194.193314] RSP: 002b:00007fff074845b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 3194.200855] RAX: ffffffffffffffda RBX: ffffffff8146da43 RCX: 00007fd2b76a8587 [ 3194.207962] RDX: 00007fff074846e0 RSI: 0000000040406469 RDI: 0000000000000003 [ 3194.215068] RBP: ffffc9000176bf88 R08: 0000000000000000 R09: 0000000000000003 [ 3194.222175] R10: 00007fd2b796bb58 R11: 0000000000000246 R12: 00007fff07484880 [ 3194.229280] R13: 0000000000000003 R14: 0000000040406469 R15: 0000000000000000 [ 3194.236386] ? __this_cpu_preempt_check+0x13/0x20 [ 3194.241070] Code: 24 b0 00 00 00 48 85 c9 0f 84 6c ff ff ff 8b 41 20 85 c0 7e 73 83 e8 01 89 41 20 41 8b 84 24 e8 00 00 00 a8 0f 0f 85 5f ff ff ff <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d f3 c3 49 8b 84 [ 3194.259943] RIP: eb_release_vmas.isra.6+0x119/0x180 [i915] RSP: ffffc9000176ba80 [ 3194.268047] ---[ end trace 1d7348c6575d8800 ]--- [ 3673.658819] softdog: Initiating panic [ 3673.662471] Kernel panic - not syncing: Software Watchdog Timer expired [ 3673.669066] Kernel Offset: disabled [ 3673.672541] Rebooting in 1 seconds.. Reported-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by:
-
Chris Wilson authored
After we detect a i915_vma pin overflow, we call __i915_vma_unpin to cleanup. However, on an overflow the pin_count bitfield will be zero, triggering an assertion, even though we the intention is to merely warn and report the error back to the user (as historically the culprit has be a leak in the display code). Fixes: 20dfbde4 ("drm/i915: Wrap vma->pin_count accessors with small inline helpers") Signed-off-by:
-
Navare, Manasi D authored
The condition for setting the Loadgen Select bit of PORT_TX_DW4 register during DDI Vswing Sequence should be Bit rate <=6 GHz whereas the existing code checks only Bit Rate < 6GHz. This patch fixes this condition. While at it also remove the redundant paranthesis. Fixes: cf54ca8b ("drm/i915/cnl: Implement voltage swing sequence.") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Paulo Zanoni authored
I wrote this code an year and a half ago and I couldn't exactly remember the main differences of these two structures when reviewing a new FBC patch. Add some comments to help explain what's the purpose of each struct. For the record, the original commits are: b183b3f1 ("drm/i915/fbc: introduce struct intel_fbc_reg_params") aaf78d27 ("drm/i915/fbc: introduce struct intel_fbc_state_cache") Cc: Praveen Paneri <praveen.paneri@intel.com> Signed-off-by:
-
Paulo Zanoni authored
* Don't define it twice. * Define MSBs first, like the rest of i915_reg.h. * Add CNL_ prefix to the bit that arrived in CNL. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170714175228.27019-1-paulo.r.zanoni@intel.comSigned-off-by:
-
Chris Wilson authored
After applying af2788925ae0 ("drm/i915: Squelch reset messages during selftests") out of sequence, I missed fixing up a call to i915_reset(). Reported-by:kbuild test robot <kbuild-all@01.org> Fixes: af2788925ae0 ("drm/i915: Squelch reset messages during selftests") Signed-off-by:
-
Chris Wilson authored
During our selftests, we try reseting the GPU tens of thousands of times, flooding the dmesg with our reset spam drowning out any potential warnings. Add an option to i915_reset()/i915_reset_engine() to specify a quiet reset for selftesting. Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
Chris Wilson authored
Extract the common barrier against rogue hangchecks from disrupting our direct testing of resets, and in the process expand the lock to include the per-engine reset shortcuts. Signed-off-by:
-
Chris Wilson authored
If the request has been completed before the reset took effect, we don't need to mark it up as being a victim. Touching fence->error after the fence has been signaled is detected by dma_fence_set_error() and triggers a BUG: [ 231.743133] kernel BUG at ./include/linux/dma-fence.h:434! [ 231.743156] invalid opcode: 0000 [#1] SMP KASAN [ 231.743172] Modules linked in: i915 drm_kms_helper drm iptable_nat nf_nat_ipv4 nf_nat x86_pkg_temp_thermal iosf_mbi i2c_algo_bit cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea fb font fbdev [last unloaded: drm] [ 231.743221] CPU: 2 PID: 20 Comm: kworker/2:0 Tainted: G U 4.13.0-rc1+ #52 [ 231.743236] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011 [ 231.743363] Workqueue: events_long i915_hangcheck_elapsed [i915] [ 231.743382] task: ffff8801f42e9780 task.stack: ffff8801f42f8000 [ 231.743489] RIP: 0010:i915_gem_reset_engine+0x45a/0x460 [i915] [ 231.743505] RSP: 0018:ffff8801f42ff770 EFLAGS: 00010202 [ 231.743521] RAX: 0000000000000007 RBX: ffff8801bf6b1880 RCX: ffffffffa02881a6 [ 231.743537] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff8801bf6b18c8 [ 231.743551] RBP: ffff8801f42ff7c8 R08: 0000000000000001 R09: 0000000000000000 [ 231.743566] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801edb02d00 [ 231.743581] R13: ffff8801e19d4200 R14: 000000000000001d R15: ffff8801ce2a4000 [ 231.743599] FS: 0000000000000000(0000) GS:ffff8801f5a80000(0000) knlGS:0000000000000000 [ 231.743614] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.743629] CR2: 00007f0ebd1add10 CR3: 0000000002621000 CR4: 00000000000406e0 [ 231.743643] Call Trace: [ 231.743752] i915_gem_reset+0x6c/0x150 [i915] [ 231.743853] i915_reset+0x175/0x210 [i915] [ 231.743958] i915_reset_device+0x33b/0x350 [i915] [ 231.744061] ? valleyview_pipestat_irq_handler+0xe0/0xe0 [i915] [ 231.744081] ? trace_hardirqs_off_caller+0x70/0x110 [ 231.744102] ? _raw_spin_unlock_irqrestore+0x46/0x50 [ 231.744120] ? find_held_lock+0x119/0x150 [ 231.744138] ? mark_lock+0x6d/0x850 [ 231.744241] ? gen8_gt_irq_ack+0x1f0/0x1f0 [i915] [ 231.744262] ? work_on_cpu_safe+0x60/0x60 [ 231.744284] ? rcu_read_lock_sched_held+0x57/0xa0 [ 231.744400] ? gen6_read32+0x2ba/0x320 [i915] [ 231.744506] i915_handle_error+0x382/0x5f0 [i915] [ 231.744611] ? gen6_rps_reset_ei+0x20/0x20 [i915] [ 231.744630] ? vsnprintf+0x128/0x8e0 [ 231.744649] ? pointer+0x6b0/0x6b0 [ 231.744667] ? debug_check_no_locks_freed+0x1a0/0x1a0 [ 231.744688] ? scnprintf+0x92/0xe0 [ 231.744706] ? snprintf+0xb0/0xb0 [ 231.744820] hangcheck_declare_hang+0x15a/0x1a0 [i915] [ 231.744932] ? engine_stuck+0x440/0x440 [i915] [ 231.744951] ? rcu_read_lock_sched_held+0x57/0xa0 [ 231.745062] ? gen6_read32+0x2ba/0x320 [i915] [ 231.745173] ? gen6_read16+0x320/0x320 [i915] [ 231.745284] ? intel_engine_get_active_head+0x91/0x170 [i915] [ 231.745401] i915_hangcheck_elapsed+0x3d8/0x400 [i915] [ 231.745424] process_one_work+0x3e8/0xac0 [ 231.745444] ? pwq_dec_nr_in_flight+0x110/0x110 [ 231.745464] ? do_raw_spin_lock+0x8e/0x120 [ 231.745484] worker_thread+0x8d/0x720 [ 231.745506] kthread+0x19e/0x1f0 [ 231.745524] ? process_one_work+0xac0/0xac0 [ 231.745541] ? kthread_create_on_node+0xa0/0xa0 [ 231.745560] ret_from_fork+0x27/0x40 [ 231.745581] Code: 8b 7d c8 e8 49 0d 02 e1 49 8b 7f 38 48 8b 75 b8 48 83 c7 10 e8 b8 89 be e1 e9 95 fc ff ff 4c 89 e7 e8 4b b9 ff ff e9 30 ff ff ff <0f> 0b 0f 1f 40 00 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fe [ 231.745767] RIP: i915_gem_reset_engine+0x45a/0x460 [i915] RSP: ffff8801f42ff770 At first glance this looks to be related to commit c64992e0 ("drm/i915: Look for active requests earlier in the reset path"), but it could easily happen before as well. On the other hand, we no longer logged victims due to the active_request being dropped earlier. v2: Be trickier to unwind the incomplete request as we cannot rely on request retirement for the lockless per-engine reset. v3: Reprobe the active request at the time of the reset. Reported-by:
-
Chris Wilson authored
We require the caller to ensure that the packets they wish to emit into the CS ring are qword aligned (i.e. have an even number of dwords). Double check this. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Shashank Sharma authored
This patch sets the is_hdmi2_src identifier in drm connector for GLK platform. GLK contains a native HDMI 2.0 controller. This identifier will help the EDID handling functions to save lot of work which is specific to HDMI 2.0 sources. V3: Added this patch V4: Rebase V4: Rebase V5: Added r-b from Ander V6: Rebase V7: Rebase V8: Rebase V9: Added r-b from Ville V9: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
