Skip to content

L
linux
Switch branch/tag
  1. 09 Feb, 2017 28 commits
  3. 08 Feb, 2017 6 commits
    • Bryant G. Ly's avatar
      ibmvscsis: Add SGL limit · b22bc278
      Bryant G. Ly authored 
      This patch adds internal LIO sgl limit since the driver already
sets a max transfer limit on transport layer of 1MB to the client.

Cc: stable@vger.kernel.org
Tested-by: default avatarSteven Royer <seroyer@linux.vnet.ibm.com>
Signed-off-by: default avatarBryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      b22bc278
    • Nicholas Bellinger's avatar
      target: Fix COMPARE_AND_WRITE ref leak for non GOOD status · 9b2792c3
      Nicholas Bellinger authored 
      This patch addresses a long standing bug where the commit phase
of COMPARE_AND_WRITE would result in a se_cmd->cmd_kref reference
leak if se_cmd->scsi_status returned non SAM_STAT_GOOD.

This would manifest first as a lost SCSI response, and eventual
hung task during fabric driver logout or re-login, as existing
shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref
to reach zero.

To address this bug, compare_and_write_post() has been changed
to drop the incorrect !cmd->scsi_status conditional that was
preventing *post_ret = 1 for being set during non SAM_STAT_GOOD
status.

This patch has been tested with SAM_STAT_CHECK_CONDITION status
from normal target_complete_cmd() callback path, as well as the
incoming __target_execute_cmd() submission failure path when
se_cmd->execute_cmd() returns non zero status.
Reported-by: default avatarDonald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Tested-by: default avatarGary Guo <ghg@datera.io>
Cc: Gary Guo <ghg@datera.io>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      9b2792c3
    • Nicholas Bellinger's avatar
      target: Fix multi-session dynamic se_node_acl double free OOPs · 01d4d673
      Nicholas Bellinger authored 
      This patch addresses a long-standing bug with multi-session
(eg: iscsi-target + iser-target) se_node_acl dynamic free
withini transport_deregister_session().

This bug is caused when a storage endpoint is configured with
demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1)
initiators, and initiator login creates a new dynamic node acl
and attaches two sessions to it.

After that, demo-mode for the storage instance is disabled via
configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and
the existing dynamic acl is never converted to an explicit ACL.

The end result is dynamic acl resources are released twice when
the sessions are shutdown in transport_deregister_session().

If the storage instance is not changed to disable demo-mode,
or the dynamic acl is converted to an explict ACL, or there
is only a single session associated with the dynamic ACL,
the bug is not triggered.

To address this big, move the release of dynamic se_node_acl
memory into target_complete_nacl() so it's only freed once
when se_node_acl->acl_kref reaches zero.

(Drop unnecessary list_del_init usage - HCH)
Reported-by: default avatarRob Millner <rlm@daterainc.com>
Tested-by: default avatarRob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      01d4d673
    • Nicholas Bellinger's avatar
      target: Fix early transport_generic_handle_tmr abort scenario · c54eeffb
      Nicholas Bellinger authored 
      This patch fixes a bug where incoming task management requests
can be explicitly aborted during an active LUN_RESET, but who's
struct work_struct are canceled in-flight before execution.

This occurs when core_tmr_drain_tmr_list() invokes cancel_work_sync()
for the incoming se_tmr_req->task_cmd->work, resulting in cmd->work
for target_tmr_work() never getting invoked and the aborted TMR
waiting indefinately within transport_wait_for_tasks().

To address this case, perform a CMD_T_ABORTED check early in
transport_generic_handle_tmr(), and invoke the normal path via
transport_cmd_check_stop_to_fabric() to complete any TMR kthreads
blocked waiting for CMD_T_STOP in transport_wait_for_tasks().

Also, move the TRANSPORT_ISTATE_PROCESSING assignment earlier
into transport_generic_handle_tmr() so the existing check in
core_tmr_drain_tmr_list() avoids attempting abort the incoming
se_tmr_req->task_cmd->work if it has already been queued into
se_device->tmr_wq.
Reported-by: default avatarRob Millner <rlm@daterainc.com>
Tested-by: default avatarRob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      c54eeffb
    • Nicholas Bellinger's avatar
      target: Use correct SCSI status during EXTENDED_COPY exception · 0583c261
      Nicholas Bellinger authored 
      This patch adds the missing target_complete_cmd() SCSI status
parameter change in target_xcopy_do_work(), that was originally
missing in commit 926317de.

It correctly propigates up the correct SCSI status during
EXTENDED_COPY exception cases, instead of always using the
hardcoded SAM_STAT_CHECK_CONDITION from original code.

This is required for ESX host environments that expect to
hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios,
and SAM_STAT_CHECK_CONDITION results in non-retriable
status for these cases.
Reported-by: default avatarNixon Vincent <nixon.vincent@calsoftinc.com>
Tested-by: default avatarNixon Vincent <nixon.vincent@calsoftinc.com>
Cc: Nixon Vincent <nixon.vincent@calsoftinc.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      0583c261
    • Nicholas Bellinger's avatar
      target: Don't BUG_ON during NodeACL dynamic -> explicit conversion · 391e2a6d
      Nicholas Bellinger authored 
      After the v4.2+ RCU conversion to se_node_acl->lun_entry_hlist,
a BUG_ON() was added in core_enable_device_list_for_node() to
detect when the located orig->se_lun_acl contains an existing
se_lun_acl pointer reference.

However, this scenario can happen when a dynamically generated
NodeACL is being converted to an explicit NodeACL, when the
explicit NodeACL contains a different LUN mapping than the
default provided by the WWN endpoint.

So instead of triggering BUG_ON(), go ahead and fail instead
following the original pre RCU conversion logic.
Reported-by: default avatarBenjamin ESTRABAUD <ben.estrabaud@mpstor.com>
Cc: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      391e2a6d
  5. 05 Feb, 2017 1 commit
  7. 04 Feb, 2017 5 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7