- 10 Aug, 2018 27 commits
-
-
Martin KaFai Lau authored
This patch adds tests for the new BPF_MAP_TYPE_REUSEPORT_SOCKARRAY. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Martin KaFai Lau authored
This patch sync include/uapi/linux/bpf.h to tools/include/uapi/linux/ Signed-off-by:
-
Martin KaFai Lau authored
This patch refactors the ARRAY_SIZE macro to bpf_util.h. Signed-off-by:
-
Martin KaFai Lau authored
This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by:
-
Martin KaFai Lau authored
This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by:
-
Martin KaFai Lau authored
This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY. To unleash the full potential of a bpf prog, it is essential for the userspace to be capable of directly setting up a bpf map which can then be consumed by the bpf prog to make decision. In this case, decide which SO_REUSEPORT sk to serve the incoming request. By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control and visibility on where a SO_REUSEPORT sk should be located in a bpf map. The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that the bpf prog can directly select a sk from the bpf map. That will raise the programmability of the bpf prog attached to a reuseport group (a group of sk serving the same IP:PORT). For example, in UDP, the bpf prog can peek into the payload (e.g. through the "data" pointer introduced in the later patch) to learn the application level's connection information and then decide which sk to pick from a bpf map. The userspace can tightly couple the sk's location in a bpf map with the application logic in generating the UDP payload's connection information. This connection info contact/API stays within the userspace. Also, when used with map-in-map, the userspace can switch the old-server-process's inner map to a new-server-process's inner map in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)". The bpf prog will then direct incoming requests to the new process instead of the old process. The old process can finish draining the pending requests (e.g. by "accept()") before closing the old-fds. [Note that deleting a fd from a bpf map does not necessary mean the fd is closed] During map_update_elem(), Only SO_REUSEPORT sk (i.e. which has already been added to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is "bind()" for UDP or "bind()+listen()" for TCP. These conditions are ensured in "reuseport_array_update_check()". A SO_REUSEPORT sk can only be added once to a map (i.e. the same sk cannot be added twice even to the same map). SO_REUSEPORT already allows another sk to be created for the same IP:PORT. There is no need to re-create a similar usage in the BPF side. When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"), it will notify the bpf map to remove it from the map also. It is done through "bpf_sk_reuseport_detach()" and it will only be called if >=1 of the "reuse->sock[]" has ever been added to a bpf map. The map_update()/map_delete() has to be in-sync with the "reuse->socks[]". Hence, the same "reuseport_lock" used by "reuse->socks[]" has to be used here also. Care has been taken to ensure the lock is only acquired when the adding sk passes some strict tests. and freeing the map does not require the reuseport_lock. The reuseport_array will also support lookup from the syscall side. It will return a sock_gen_cookie(). The sock_gen_cookie() is on-demand (i.e. a sk's cookie is not generated until the very first map_lookup_elem()). The lookup cookie is 64bits but it goes against the logical userspace expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also). It may catch user in surprise if we enforce value_size=8 while userspace still pass a 32bits fd during update. Supporting different value_size between lookup and update seems unintuitive also. We also need to consider what if other existing fd based maps want to return 64bits value from syscall's lookup in the future. Hence, reuseport_array supports both value_size 4 and 8, and assuming user will usually use value_size=4. The syscall's lookup will return ENOSPC on value_size=4. It will will only return 64bits value from sock_gen_cookie() when user consciously choose value_size=8 (as a signal that lookup is desired) which then requires a 64bits value in both lookup and update. Signed-off-by:
-
Martin KaFai Lau authored
A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which allows a SO_REUSEPORT sk to be added to a bpf map. When a sk is removed from reuse->socks[], it also needs to be removed from the bpf map. Also, when adding a sk to a bpf map, the bpf map needs to ensure it is indeed in a reuse->socks[]. Hence, reuseport_lock is needed by the bpf map to ensure its map_update_elem() and map_delete_elem() operations are in-sync with the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only acquire the reuseport_lock after ensuring the adding sk is already in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem() will be lockless. This patch also adds an ID to sock_reuseport. A later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows a bpf prog to select a sk from a bpf map. It is inflexible to statically enforce a bpf map can only contain the sk belonging to a particular reuse->socks[] (i.e. same IP:PORT) during the bpf verification time. For example, think about the the map-in-map situation where the inner map can be dynamically changed in runtime and the outer map may have inner maps belonging to different reuseport groups. Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT type) selects a sk, this selected sk has to be checked to ensure it belongs to the requesting reuseport group (i.e. the group serving that IP:PORT). The "sk->sk_reuseport_cb" pointer cannot be used for this checking purpose because the pointer value will change after reuseport_grow(). Instead of saving all checking conditions like the ones preced calling "reuseport_add_sock()" and compare them everytime a bpf_prog is run, a 32bits ID is introduced to survive the reuseport_grow(). The ID is only acquired if any of the reuse->socks[] is added to the newly introduced "BPF_MAP_TYPE_REUSEPORT_ARRAY" map. If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this patch is a no-op. Signed-off-by:
-
Martin KaFai Lau authored
Although the actual cookie check "__cookie_v[46]_check()" does not involve sk specific info, it checks whether the sk has recent synq overflow event in "tcp_synq_no_recent_overflow()". The tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second when it has sent out a syncookie (through "tcp_synq_overflow()"). The above per sk "recent synq overflow event timestamp" works well for non SO_REUSEPORT use case. However, it may cause random connection request reject/discard when SO_REUSEPORT is used with syncookie because it fails the "tcp_synq_no_recent_overflow()" test. When SO_REUSEPORT is used, it usually has multiple listening socks serving TCP connection requests destinated to the same local IP:PORT. There are cases that the TCP-ACK-COOKIE may not be received by the same sk that sent out the syncookie. For example, if reuse->socks[] began with {sk0, sk1}, 1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp was updated. 2) the reuse->socks[] became {sk1, sk2} later. e.g. sk0 was first closed and then sk2 was added. Here, sk2 does not have ts_recent_stamp set. There are other ordering that will trigger the similar situation below but the idea is the same. 3) When the TCP-ACK-COOKIE comes back, sk2 was selected. "tcp_synq_no_recent_overflow(sk2)" returns true. In this case, all syncookies sent by sk1 will be handled (and rejected) by sk2 while sk1 is still alive. The userspace may create and remove listening SO_REUSEPORT sockets as it sees fit. E.g. Adding new thread (and SO_REUSEPORT sock) to handle incoming requests, old process stopping and new process starting...etc. With or without SO_ATTACH_REUSEPORT_[CB]BPF, the sockets leaving and joining a reuseport group makes picking the same sk to check the syncookie very difficult (if not impossible). The later patches will allow bpf prog more flexibility in deciding where a sk should be located in a bpf map and selecting a particular SO_REUSEPORT sock as it sees fit. e.g. Without closing any sock, replace the whole bpf reuseport_array in one map_update() by using map-in-map. Getting the syncookie check working smoothly across socks in the same "reuse->socks[]" is important. A partial solution is to set the newly added sk's ts_recent_stamp to the max ts_recent_stamp of a reuseport group but that will require to iterate through reuse->socks[] OR pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is joining a reuseport group. However, neither of them will solve the existing sk getting moved around the reuse->socks[] and that sk may not have ts_recent_stamp updated, unlikely under continuous synflood but not impossible. This patch opts to treat the reuseport group as a whole when considering the last synq overflow timestamp since they are serving the same IP:PORT from the userspace (and BPF program) perspective. "synq_overflow_ts" is added to "struct sock_reuseport". The tcp_synq_overflow() and tcp_synq_no_recent_overflow() will update/check reuse->synq_overflow_ts if the sk is in a reuseport group. Similar to the reuseport decision in __inet_lookup_listener(), both sk->sk_reuseport and sk->sk_reuseport_cb are tested for SO_REUSEPORT usage. Update on "synq_overflow_ts" happens at roughly once every second. A synflood test was done with a 16 rx-queues and 16 reuseport sockets. No meaningful performance change is observed. Before and after the change is ~9Mpps in IPv4. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: -
Daniel Borkmann authored
Yonghong Song says: ==================== Commit a26ca7c9 ("bpf: btf: Add pretty print support to the basic arraymap") added pretty print support to array map. This patch adds pretty print for hash and lru_hash maps. The following example shows the pretty-print result of a pinned hashmap. Without this patch set, user will get an error instead. struct map_value { int count_a; int count_b; }; cat /sys/fs/bpf/pinned_hash_map: 87907: {87907,87908} 57354: {37354,57355} 76625: {76625,76626} ... Patch #1 fixed a bug in bpffs map_seq_next() function so that all elements in the hash table will be traversed. Patch #2 implemented map_seq_show_elem() and map_check_btf() callback functions for hash and lru hash maps. Patch #3 enhanced tools/testing/selftests/bpf/test_btf.c to test bpffs hash and lru hash map pretty print. ==================== Signed-off-by:
-
Yonghong Song authored
Pretty print tests for hash/lru_hash maps are added in test_btf.c. The btf type blob is the same as pretty print array map test. The test result: $ mount -t bpf bpf /sys/fs/bpf $ ./test_btf -p BTF pretty print array......OK BTF pretty print hash......OK BTF pretty print lru hash......OK PASS:3 SKIP:0 FAIL:0 Signed-off-by:Yonghong Song <yhs@fb.com> Signed-off-by:
-
Yonghong Song authored
Commit a26ca7c9 ("bpf: btf: Add pretty print support to the basic arraymap") added pretty print support to array map. This patch adds pretty print for hash and lru_hash maps. The following example shows the pretty-print result of a pinned hashmap: struct map_value { int count_a; int count_b; }; cat /sys/fs/bpf/pinned_hash_map: 87907: {87907,87908} 57354: {37354,57355} 76625: {76625,76626} ... Signed-off-by:
-
Yonghong Song authored
In function map_seq_next() of kernel/bpf/inode.c, the first key will be the "0" regardless of the map type. This works for array. But for hash type, if it happens key "0" is in the map, the bpffs map show will miss some items if the key "0" is not the first element of the first bucket. This patch fixed the issue by guaranteeing to get the first element, if the seq_show is just started, by passing NULL pointer key to map_get_next_key() callback. This way, no missing elements will occur for bpffs hash table show even if key "0" is in the map. Fixes: a26ca7c9 ("bpf: btf: Add pretty print support to the basic arraymap") Acked-by:
-
Daniel Borkmann authored
Toshiaki Makita says: ==================== This patch set introduces driver XDP for veth. Basically this is used in conjunction with redirect action of another XDP program. NIC -----------> veth===veth (XDP) (redirect) (XDP) In this case xdp_frame can be forwarded to the peer veth without modification, so we can expect far better performance than generic XDP. Envisioned use-cases -------------------- * Container managed XDP program Container host redirects frames to containers by XDP redirect action, and privileged containers can deploy their own XDP programs. * XDP program cascading Two or more XDP programs can be called for each packet by redirecting xdp frames to veth. * Internal interface for an XDP bridge When using XDP redirection to create a virtual bridge, veth can be used to create an internal interface for the bridge. Implementation -------------- This changeset is making use of NAPI to implement ndo_xdp_xmit and XDP_TX/REDIRECT. This is mainly because XDP heavily relies on NAPI context. - patch 1: Export a function needed for veth XDP. - patch 2-3: Basic implementation of veth XDP. - patch 4-6: Add ndo_xdp_xmit. - patch 7-9: Add XDP_TX and XDP_REDIRECT. - patch 10: Performance optimization for multi-queue env. Tests and performance numbers ----------------------------- Tested with a simple XDP program which only redirects packets between NIC and veth. I used i40e 25G NIC (XXV710) for the physical NIC. The server has 20 of Xeon Silver 2.20 GHz cores. pktgen --(wire)--> XXV710 (i40e) <--(XDP redirect)--> veth===veth (XDP) The rightmost veth loads XDP progs and just does DROP or TX. The number of packets is measured in the XDP progs. The leftmost pktgen sends packets at 37.1 Mpps (almost 25G wire speed). veth XDP action Flows Mpps ================================ DROP 1 10.6 DROP 2 21.2 DROP 100 36.0 TX 1 5.0 TX 2 10.0 TX 100 31.0 I also measured netperf TCP_STREAM but was not so great performance due to lack of tx/rx checksum offload and TSO, etc. netperf <--(wire)--> XXV710 (i40e) <--(XDP redirect)--> veth===veth (XDP PASS) Direction Flows Gbps ============================== external->veth 1 20.8 external->veth 2 23.5 external->veth 100 23.6 veth->external 1 9.0 veth->external 2 17.8 veth->external 100 22.9 Also tested doing ifup/down or load/unload a XDP program repeatedly during processing XDP packets in order to check if enabling/disabling NAPI is working as expected, and found no problems. v8: - Don't use xdp_frame pointer address to calculate skb->head, headroom, and xdp_buff.data_hard_start. v7: - Introduce xdp_scrub_frame() to clear kernel pointers in xdp_frame and use it instead of memset(). v6: - Check skb->len only if reallocation is needed. - Add __GFP_NOWARN to alloc_page() since it can be triggered by external events. - Fix sparse warning around EXPORT_SYMBOL. v5: - Fix broken SOBs. v4: - Don't adjust MTU automatically. - Skip peer IFF_UP check on .ndo_xdp_xmit() because it is unnecessary. Add comments to explain that. - Use redirect_info instead of xdp_mem_info for storing no_direct flag to avoid per packet copy cost. v3: - Drop skb bulk xmit patch since it makes little performance difference. The hotspot in TCP skb xmit at this point is checksum computation in skb_segment and packet copy on XDP_REDIRECT due to cloned/nonlinear skb. - Fix race on closing device. - Add extack messages in ndo_bpf. v2: - Squash NAPI patch with "Add driver XDP" patch. - Remove conversion from xdp_frame to skb when NAPI is not enabled. - Introduce per-queue XDP ring (patch 8). - Introduce bulk skb xmit when XDP is enabled on the peer (patch 9). ==================== Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
Toshiaki Makita authored
Move XDP and napi related fields from veth_priv to newly created veth_rq structure. When xdp_frames are enqueued from ndo_xdp_xmit and XDP_TX, rxq is selected by current cpu. When skbs are enqueued from the peer device, rxq is one to one mapping of its peer txq. This way we have a restriction that the number of rxqs must not less than the number of peer txqs, but leave the possibility to achieve bulk skb xmit in the future because txq lock would make it possible to remove rxq ptr_ring lock. v3: - Add extack messages. - Fix array overrun in veth_xmit. Signed-off-by:
-
Toshiaki Makita authored
This allows further redirection of xdp_frames like NIC -> veth--veth -> veth--veth (XDP) (XDP) (XDP) The intermediate XDP, redirecting packets from NIC to the other veth, reuses xdp_mem_info from NIC so that page recycling of the NIC works on the destination veth's XDP. In this way return_frame is not fully guarded by NAPI, since another NAPI handler on another cpu may use the same xdp_mem_info concurrently. Thus disable napi_direct by xdp_set_return_frame_no_direct() during the NAPI context. v8: - Don't use xdp_frame pointer address for data_hard_start of xdp_buff. v4: - Use xdp_[set|clear]_return_frame_no_direct() instead of a flag in xdp_mem_info. v3: - Fix double free when veth_xdp_tx() returns a positive value. - Convert xdp_xmit and xdp_redir variables into flags. Signed-off-by:
-
Toshiaki Makita authored
We need some mechanism to disable napi_direct on calling xdp_return_frame_rx_napi() from some context. When veth gets support of XDP_REDIRECT, it will redirects packets which are redirected from other devices. On redirection veth will reuse xdp_mem_info of the redirection source device to make return_frame work. But in this case .ndo_xdp_xmit() called from veth redirection uses xdp_mem_info which is not guarded by NAPI, because the .ndo_xdp_xmit() is not called directly from the rxq which owns the xdp_mem_info. This approach introduces a flag in bpf_redirect_info to indicate that napi_direct should be disabled even when _rx_napi variant is used as well as helper functions to use it. A NAPI handler who wants to use this flag needs to call xdp_set_return_frame_no_direct() before processing packets, and call xdp_clear_return_frame_no_direct() after xdp_do_flush_map() before exiting NAPI. v4: - Use bpf_redirect_info for storing the flag instead of xdp_mem_info to avoid per-frame copy cost. Signed-off-by:
-
Toshiaki Makita authored
We are going to add kern_flags field in redirect_info for kernel internal use. In order to avoid function call to access the flags, make redirect_info accessible from modules. Also as it is now non-static, add prefix bpf_ to redirect_info. v6: - Fix sparse warning around EXPORT_SYMBOL. Signed-off-by:
-
Toshiaki Makita authored
This allows NIC's XDP to redirect packets to veth. The destination veth device enqueues redirected packets to the napi ring of its peer, then they are processed by XDP on its peer veth device. This can be thought as calling another XDP program by XDP program using REDIRECT, when the peer enables driver XDP. Note that when the peer veth device does not set driver xdp, redirected packets will be dropped because the peer is not ready for NAPI. v4: - Don't use xdp_ok_fwd_dev() because checking IFF_UP is not necessary. Add comments about it and check only MTU. v2: - Drop the part converting xdp_frame into skb when XDP is not enabled. - Implement bulk interface of ndo_xdp_xmit. - Implement XDP_XMIT_FLUSH bit and drop ndo_xdp_flush. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Toshiaki Makita authored
This is preparation for XDP TX and ndo_xdp_xmit. This allows napi handler to handle xdp_frames through xdp ring as well as sk_buff. v8: - Don't use xdp_frame pointer address to calculate skb->head and headroom. v7: - Use xdp_scrub_frame() instead of memset(). v3: - Revert v2 change around rings and use a flag to differentiate skb and xdp_frame, since bulk skb xmit makes little performance difference for now. v2: - Use another ring instead of using flag to differentiate skb and xdp_frame. This approach makes bulk skb transmit possible in veth_xmit later. - Clear xdp_frame feilds in skb->head. - Implement adjust_tail. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Toshiaki Makita authored
xdp_frame has kernel pointers which should not be readable from bpf programs. When we want to reuse xdp_frame region but it may be read by bpf programs later, we can use this helper to clear kernel pointers. This is more efficient than calling memset() for the entire struct. Signed-off-by:
-
Toshiaki Makita authored
Oversized packets including GSO packets can be dropped if XDP is enabled on receiver side, so don't send such packets from peer. Drop TSO and SCTP fragmentation features so that veth devices themselves segment packets with XDP enabled. Also cap MTU accordingly. v4: - Don't auto-adjust MTU but cap max MTU. Signed-off-by:
-
Toshiaki Makita authored
This is the basic implementation of veth driver XDP. Incoming packets are sent from the peer veth device in the form of skb, so this is generally doing the same thing as generic XDP. This itself is not so useful, but a starting point to implement other useful veth XDP features like TX and REDIRECT. This introduces NAPI when XDP is enabled, because XDP is now heavily relies on NAPI context. Use ptr_ring to emulate NIC ring. Tx function enqueues packets to the ring and peer NAPI handler drains the ring. Currently only one ring is allocated for each veth device, so it does not scale on multiqueue env. This can be resolved by allocating rings on the per-queue basis later. Note that NAPI is not used but netif_rx is used when XDP is not loaded, so this does not change the default behaviour. v6: - Check skb->len only when allocation is needed. - Add __GFP_NOWARN to alloc_page() as it can be triggered by external events. v3: - Fix race on closing the device. - Add extack messages in ndo_bpf. v2: - Squashed with the patch adding NAPI. - Implement adjust_tail. - Don't acquire consumer lock because it is guarded by NAPI. - Make poll_controller noop since it is unnecessary. - Register rxq_info on enabling XDP rather than on opening the device. Signed-off-by:
-
Toshiaki Makita authored
This is needed for veth XDP which does skb_copy_expand()-like operation. v2: - Drop skb_copy_header part because it has already been exported now. Signed-off-by:
-
Daniel Borkmann authored
Jesper Dangaard Brouer says: ==================== Background: cpumap moves the SKB allocation out of the driver code, and instead allocate it on the remote CPU, and invokes the regular kernel network stack with the newly allocated SKB. The idea behind the XDP CPU redirect feature, is to use XDP as a load-balancer step in-front of regular kernel network stack. But the current sample code does not provide a good example of this. Part of the reason is that, I have implemented this as part of Suricata XDP load-balancer. Given this is the most frequent feature request I get. This patchset implement the same XDP load-balancing as Suricata does, which is a symmetric hash based on the IP-pairs + L4-protocol. The expected setup for the use-case is to reduce the number of NIC RX queues via ethtool (as XDP can handle more per core), and via smp_affinity assign these RX queues to a set of CPUs, which will be handling RX packets. The CPUs that runs the regular network stack is supplied to the sample xdp_redirect_cpu tool by specifying the --cpu option multiple times on the cmdline. I do note that cpumap SKB creation is not feature complete yet, and more work is coming. E.g. given GRO is not implemented yet, do expect TCP workloads to be slower. My measurements do indicate UDP workloads are faster. ==================== Signed-off-by: -
Jesper Dangaard Brouer authored
This implement XDP CPU redirection load-balancing across available CPUs, based on the hashing IP-pairs + L4-protocol. This equivalent to xdp-cpu-redirect feature in Suricata, which is inspired by the Suricata 'ippair' hashing code. An important property is that the hashing is flow symmetric, meaning that if the source and destination gets swapped then the selected CPU will remain the same. This is helps locality by placing both directions of a flows on the same CPU, in a forwarding/routing scenario. The hashing INITVAL (15485863 the 10^6th prime number) was fairly arbitrary choosen, but experiments with kernel tree pktgen scripts (pktgen_sample04_many_flows.sh +pktgen_sample05_flow_per_thread.sh) showed this improved the distribution. This patch also change the default loaded XDP program to be this load-balancer. As based on different user feedback, this seems to be the expected behavior of the sample xdp_redirect_cpu. Link: https://github.com/OISF/suricata/commit/796ec08dd7a63Signed-off-by:
-
Jesper Dangaard Brouer authored
Adjusted function call API to take an initval. This allow the API user to set the initial value, as a seed. This could also be used for inputting the previous hash. Signed-off-by:
-
Björn Töpel authored
This reverts commit 36e0f12b. The reverted commit adds a WARN to check against NULL entries in the mem_id_ht rhashtable. Any kernel path implementing the XDP (generic or driver) fast path is required to make a paired xdp_rxq_info_reg/xdp_rxq_info_unreg call for proper function. In addition, a driver using a different allocation scheme than the default MEM_TYPE_PAGE_SHARED is required to additionally call xdp_rxq_info_reg_mem_model. For MEM_TYPE_ZERO_COPY, an xdp_rxq_info_reg_mem_model call ensures that the mem_id_ht rhashtable has a properly inserted allocator id. If not, this would be a driver bug. A NULL pointer kernel OOPS is preferred to the WARN. Suggested-by:
Björn Töpel <bjorn.topel@intel.com> Acked-by:
-
- 09 Aug, 2018 13 commits
-
-
David S. Miller authored
Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst adding some tracepoints. Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jose Abreu says: ==================== Add support for XGMAC2 in stmmac This series adds support for 10Gigabit IP in stmmac. The IP is called XGMAC2 and has many similarities with GMAC4. Due to this, its relatively easy to incorporate this new IP into stmmac driver by adding a new block and filling the necessary callbacks. The functionality added by this series is still reduced but its only a starting point which will later be expanded. I splitted the patches into funcionality and to ease the review. Only the patch 8/9 really enables the XGMAC2 block by adding a new compatible string. Version 4 addresses review comments of Florian Fainelli and Rob Herring. NOTE: Although the IP supports 10G, for now it was only possible to test it at 1G speed due to 10G PHY HW shipping problems. Here follows iperf3 results at 1G: Connecting to host 192.168.0.10, port 5201 [ 4] local 192.168.0.3 port 39178 connected to 192.168.0.10 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 110 MBytes 920 Mbits/sec 0 482 KBytes [ 4] 1.00-2.00 sec 113 MBytes 946 Mbits/sec 0 482 KBytes [ 4] 2.00-3.00 sec 112 MBytes 937 Mbits/sec 0 482 KBytes [ 4] 3.00-4.00 sec 113 MBytes 946 Mbits/sec 0 482 KBytes [ 4] 4.00-5.00 sec 112 MBytes 935 Mbits/sec 0 482 KBytes [ 4] 5.00-6.00 sec 113 MBytes 946 Mbits/sec 0 482 KBytes [ 4] 6.00-7.00 sec 112 MBytes 937 Mbits/sec 0 482 KBytes [ 4] 7.00-8.00 sec 113 MBytes 946 Mbits/sec 0 482 KBytes [ 4] 8.00-9.00 sec 112 MBytes 937 Mbits/sec 0 482 KBytes [ 4] 9.00-10.00 sec 113 MBytes 946 Mbits/sec 0 482 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 1.09 GBytes 940 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 1.09 GBytes 938 Mbits/sec receiver ==================== Signed-off-by: -
Jose Abreu authored
Adds the documentation for XGMAC2 DT bindings. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Jose Abreu authored
Add the bindings parsing for XGMAC2 IP block. Signed-off-by:
-
Jose Abreu authored
Now that we have all the XGMAC related callbacks, lets start integrating this IP block into main driver. Also, we corrected the initialization flow to only start DMA after setting descriptors length. Signed-off-by:
-
Jose Abreu authored
XGMAC2 uses the same engine of timestamping as GMAC4. Let's use the same callbacks. Signed-off-by:
-
Jose Abreu authored
Add the MDIO related funcionalities for the new IP block XGMAC2. Signed-off-by:
-
Jose Abreu authored
Add the descriptor related callbacks for the new IP block XGMAC2. Signed-off-by:
-
Jose Abreu authored
Add the DMA related callbacks for the new IP block XGMAC2. Signed-off-by:
-
Jose Abreu authored
Add the MAC related callbacks for the new IP block XGMAC2. Signed-off-by:
-
Jose Abreu authored
Add a new entry to HWIF table for XGMAC 2.10. For now we fill it with empty callbacks which will be added in posterior patches. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== More complete PHYLINK support for mv88e6xxx Previous patches added sufficient PHYLINK support to the mv88e6xxx that it did not break existing use cases, basically fixed-link phys. This patchset builds out the support so that SFP modules, up to 2.5Gbps can be supported, on mv88e6390X, on ports 9 and 10. It also provides a framework which can be extended to support SFPs on ports 2-8 of mv88e6390X, 10Gbps PHYs, and SFP support on the 6352 family. Russell King did much of the initial work, implementing the validate and mac_link_state calls. However, there is an important TODO in the commit message: needs to call phylink_mac_change() when the port link comes up/goes down. The remaining patches implement this, by adding more support for the SERDES interfaces, in particular, interrupt support so we get notified when the SERDES gains/looses sync. This has been tested on the ZII devel C, using a Clearfog as peer device. ==================== Signed-off-by: -
Andrew Lunn authored
When a port changes CMODE, the SERDES interface being used can change. Disable interrupts for the old SERDES interface, and enable interrupts on the new. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
