- 16 Mar, 2007 8 commits
-
-
Joachim Fenkes authored
This adds two sysfs attributes to /sys/bus/ibmebus which can be used to notify the ebus driver of added / removed ebus devices in the OF device tree. Echoing the device's location code (as found in the OFDT "ibm,loc-code" property) into the "probe" attribute will notify ebus of addition of the device and cause the appropriate device driver's probe function to be called on the device. Likewise, echoing the location code into the "remove" attribute will cause the device to be removed from the system. The writes will block until the respective operation has finished and return an error code if the operation failed. In addition, two minor tidbits are fixed: - The fake root device used to provide a common parent for all ebus devices is now based on device instead of of_device - it had no associated devtree node. This saves several checks throughout the ebus driver. - The sysfs attributes are now generated automagically by device_register() instead of by the ibmebus code, which saves a few compiler warnings about unused return codes. Signed-off-by:
Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Joachim Fenkes authored
This fixes a lot of whitespace in ibmebus.[ch] Signed-off-by:
-
Mark A. Greer authored
Currently, early_init() in setup_32.c zeroes from '_bss_start' to '_end'. It should only zero from '__bss_start' to '__bss_stop'. This patch does that. Signed-off-by:
Mark A. Greer <mgreer@mvista.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Scott Wood authored
Signed-off-by:
Scott Wood <scottwood@freescale.com> Acked-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Scott Wood authored
ft_find_node_by_prop_value() finds nodes with the specified property/value pair. Signed-off-by:
-
Scott Wood authored
Most of ft_get_parent() is factored out into __ft_get_parent(), which deals only in internal node pointers. The ft_get_parent() wrapper handles phandle conversion in both directions (previously, ft_get_parent() did not convert its return value). It also now returns NULL as the parent of the toplevel node, rather than just returning the toplevel node again (which made it rather useless in loops). Signed-off-by:
-
Scott Wood authored
The property searching part of ft_get_prop is factored out into an internal __ft_get_prop() which does not deal with phandles and does not copy the property data. ft_get_prop() is then a wrapper that does the phandle translation and copying. Signed-off-by:
-
Scott Wood authored
Add a function to look up a relative, rather than absolute, path name. Signed-off-by:
-
- 13 Mar, 2007 10 commits
-
-
Scott Wood authored
When adding a property, the property name should be added to the string table if it doesn't already exist. map_string() does that; lookup_string() will fail instead. Signed-off-by:
-
Scott Wood authored
Move the caller's pointer back to match the change in the region's start, rather than alter a byte of the device tree's content. Signed-off-by:
-
Scott Wood authored
The ft_reorder() function may change the start of the region of interest, so the pointer provided by the caller into that region must be fixed up to still point to the same datum. Signed-off-by:
-
Scott Wood authored
Currently, if ft_get_phandle() is passed NULL it will allocate an entry for it and return a non-NULL phandle. This patch makes it simply pass the NULL through. Signed-off-by:
-
Scott Wood authored
This name better reflects what the function does, which is to look up the phandle for an internal node pointer, and add it to the internal pointer to phandle table if not found. Signed-off-by:
-
Scott Wood authored
Clean up some of the open-coded data structure references by providing a function to return a pointer to the tree's root node. This is only used in high-level functions trying to access the root of the tree, not in low-level code that is actually manipulating the data structure. Signed-off-by:
-
Scott Wood authored
ops.h references NULL, so include stddef.h, so files including ops.h don't have to. Signed-off-by:
-
David Gibson authored
This patch re-organises the way the zImage wrapper code is entered, to allow more flexibility on platforms with unusual entry conditions. After this patch, a platform .o file has two options: 1) It can define a _zimage_start, in which case the platform code gets control from the very beginning of execution. In this case the platform code is responsible for relocating the zImage if necessary, clearing the BSS, performing any platform specific initialization, and finally calling start() to load and enter the kernel. 2) It can define platform_init(). In this case the generic crt0.S handles initial entry, and calls platform_init() before calling start(). The signature of platform_init() is changed, however, to take up to 5 parameters (in r3..r7) as they come from the platform's initial loader, instead of a fixed set of parameters based on OF's usage. When using the generic crt0.S, the platform .o can optionally supply a custom stack to use, using the BSS_STACK() macro. If this is not supplied, the crt0.S will assume that the loader has supplied a usable stack. In either case, the platform code communicates information to the generic code (specifically, a PROM pointer for OF systems, and/or an initrd image address supplied by the bootloader) via a global structure "loader_info". In addition the wrapper script is rearranged to ensure that the platform .o is always linked first. This means that platforms where the zImage entry point is at a fixed address or offset, rather than being encoded in the binary header can be supported using option (1). Signed-off-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
-
David Gibson authored
This patch rewrites prep_kernel() in the zImage wrapper code to be clearer and more flexible. Notable changes: - Handling of the initrd image from prep_kernel() has moved into a new prep_initrd() function. - The address of the initrd image is now added as device tree properties, as the kernel expects. - We only copy a packaged initrd image to a new location if it is in danger of being clobbered when the kernel moves to its final location, instead of always. - By default we decompress the kernel directly to address 0, instead of requiring it to relocate itself. Platforms (such as OF) where doing this could clobber still-live firmware data structures can override the vmlinux_alloc hook to provide an alternate place to decompress the kernel. - We no longer pass lots of information between functions in global variables. Signed-off-by:
-
David Gibson authored
At present, arch/powerpc/boot/main.c includes a gunzip() function which is a convenient wrapper around zlib. However, it doesn't conveniently allow decompressing part of an image to one location, then the remainder to a different address. This patch adds a new set of more flexible convenience wrappers around zlib, moving them to their own file, gunzip_util.c, in the process. These wrappers allow decompressing sections of the compressed image to different locations. In addition, they transparently handle uncompressed data, avoiding special case code to handle uncompressed vmlinux images. The patch also converts main.c to use the new wrappers, using the new flexibility to avoid decompressing the vmlinux's ELF header twice as we did previously. That in turn means we avoid extending our allocations for the vmlinux to allow space for the extra copy of the ELF header. Signed-off-by:
-
- 09 Mar, 2007 17 commits
-
-
Jake Moilanen authored
750CL cputable entry from Steve Winiecki. Signed-off-by:
Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by:
-
Zang Roy-r61911 authored
Remove fixed setting of ROOT_DEV for 7448HPC2 platforms. Signed-off-by:
Roy Zang <tie-fei.zang@freescale.com> Signed-off-by:
-
Stephen Rothwell authored
It always returned 0 and noone checked. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Stephen Rothwell authored
This allows us to hide pci_dma_ops. Signed-off-by:
-
Stephen Rothwell authored
This will allow us to build without PCI easier. Signed-off-by:
-
Jake Moilanen authored
There are many adapters which can not handle DMAing acrosss any 4 GB boundary. For instance the latest Emulex adapters. This normally is not an issue as firmware gives us dma-windows under 4gigs. However, some of the new System-P boxes have dma-windows above 4gigs, and this present a problem. I propose fixing it in the IOMMU allocation instead of making each driver protect against it as it is more efficient, and won't require changing every driver which has not considered this issue. This patch checks to see if the mapping spans a 4 gig boundary, and if it does, retries the allocation. It tries the next allocation at the start of the crossed 4 gig boundary. Signed-off-by:
-
Dave Jiang authored
Implements the per arch atomic_scrub() that EDAC uses for software ECC scrubbing. It reads memory and then writes back the original value, allowing the hardware to detect and correct memory errors. Signed-off-by:
Dave Jiang <djiang@mvista.com> Signed-off-by:
-
Stuart Yoder authored
Create a new section descrbing how interrupts are represented in the device tree. Added more detail. Clarified some things. Signed-off-by:
Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by:
-
Stuart Yoder authored
The #cpus property is unused and undocumented and is therefore being removed. Signed-off-by:
-
MOKUNO Masakazu authored
Remove some redundant isync instructions. enable_64b_mode() already does an isync, so there is no need to do it again. Signed-off-by:
MOKUNO, Masakazu <mokuno@sm.sony.co.jp> Acked-by:
-
Olaf Hering authored
On Tue, Oct 31, Hugh Dickins wrote: > +++ linux/include/asm-powerpc/current.h 2006-10-30 19:27:05.000000000 +0000 > +static inline struct task_struct *get_current(void) > +{ > + struct task_struct *task; > + > + __asm__ __volatile__("ld %0,%1(13)" > + : "=r" (task) > + : "i" (offsetof(struct paca_struct, __current))); This breaks compile of 2.6.18.8: CC [M] drivers/media/video/pwc/pwc-uncompress.o In file included from /home/olaf/kernel/linux-2.6.18.8/drivers/media/video/pwc/pwc-uncompress.c:29: include2/asm/current.h: In function 'get_current': include2/asm/current.h:23: warning: implicit declaration of function 'offsetof' include2/asm/current.h:23: error: expected expression before 'struct' make[5]: *** [drivers/media/video/pwc/pwc-uncompress.o] Error 1 Signed-off-by:Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Segher Boessenkool authored
Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Acked-by:
G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Geert Uytterhoeven authored
Add missing checks to PS3 specific drivers ps3av and sys-manager to verify that we are actually running on a PS3 (pointed out by Arnd). Correct existing checks in other subsystems/drivers to return -ENODEV instead of zero. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
-
- 08 Mar, 2007 5 commits
-
-
Stephen Rothwell authored
I forgot to do this when wiring up the syscall. Signed-off-by:
-
David Gibson authored
At present, when an initrd is passed to the kernel used flat device tree properties, the memory the initrd occupies must also be reserved in the flat tree's reserve map, or the kernel may overwrite it. That makes life more complicated than it could be for the bootwrapper. This patch makes the kernel automatically reserve the initrd's space. That in turn requires parsing the initrd parameters earlier than they are currently, in early_init_dt_scan_chosen() instead of check_for_initrd(). Signed-off-by:
-
David Gibson authored
At present calling lmb_reserve() (and hence lmb_add_region()) twice for exactly the same memory region will cause strange behaviour. This makes life difficult when booting from a flat device tree with memory reserve map. Which regions are automatically reserved by the kernel has changed over time, so it's quite possible a newer kernel could attempt to auto-reserve a region which is also explicitly listed in the device tree's reserve map, leading to trouble. This patch avoids the problem by making lmb_reserve() ignore a call to reserve a previously reserved region. It also removes a now redundant test designed to avoid one specific case of the problem noted above. At present, this patch deals only with duplicate reservations of an identical region. Attempting to reserve two different, but overlapping regions will still cause problems. I might post another patch later dealing with this case, but I'm avoiding it now since it is substantially more complicated to deal with, less likely to occur and more likely to indicate a genuine bug elsewhere if it does occur. Signed-off-by:
-
Adrian Bunk authored
This patch removes the unused EXPORT_SYMBOL(mac_hid_mouse_emulate_buttons). Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Stuart Yoder authored
Remove interrupt-controller as a valid property under /chosen in the documentation. There is a consensus that an interrupt-controller property does not belong under /chosen. /chosen is specifically for dynamic properties set at runtime. Signed-off-by:
-
