- 12 Jul, 2009 2 commits
-
-
Johannes Berg authored
For the network namespace work in generic netlink I need to be able to call this function under rcu_read_lock(), otherwise the locking becomes a nightmare and more locks would be needed. Instead, just embed a struct rcu_head (actually a struct listeners_rcu_head that also carries the pointer to the memory block) into the listeners memory so we can use call_rcu() instead of synchronising and then freeing. No rcu_barrier() is needed since this code cannot be modular. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
I added those myself in commits b4ff4f04 and 84659eb5, but I see no reason now why they should be exported, only generic netlink uses them which cannot be modular. Signed-off-by:
-
- 10 Jul, 2009 38 commits
-
-
Johannes Berg authored
sparse correctly complains about this, no reason for it not to be static. Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
In order to force drivers to advertise their interface types, don't just disallow creating new interfaces with unadvertised types but also disallow setting them UP. Additionally, add some validation on the operations the drivers support. Signed-off-by:
-
Johannes Berg authored
We've named the registered devices 'drv' sometimes, thinking of "driver", which is not what it is, it's the internal representation of a wiphy, i.e. a device. Let's clean up the naming once and and use 'rdev' aka 'registered device' everywhere. Signed-off-by:
-
Johannes Berg authored
Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by:
-
Johannes Berg authored
sparse warns about a number of things, and one of them (use_mfp shadowed variable) actually is a bug, fix all of them. Signed-off-by:
-
Johannes Berg authored
Currently we call that cfg80211_put_dev(), but that is misleading. With the new convention of using 'rdev' for registered_device variables, also call that function cfg80211_unlock_rdev(). Signed-off-by:
-
Johannes Berg authored
The original code in mac80211 could send a deauth frame under certain circumstances even if nothing had ever requested an authentication. This has been fixed with the rework there, so cfg80211 can now warn again about spurious events to catch possible future drivers or mac80211 regressions. Signed-off-by:
-
Johannes Berg authored
After the mac80211 mlme cleanup, we can require that the MLME functions in cfg80211 can sleep. This will simplify future work in cfg80211 a lot. Signed-off-by:
-
Johannes Berg authored
Otherwise it becomes very hard to reset the structs correctly since wext can be configured while the interface is down. Signed-off-by:
-
Johannes Berg authored
We shouldn't be looking at the ssid_len for non-IBSS, and for IBSS we should also return an error on trying to leave an IBSS while not in or joining an IBSS. This fixes an issue where we wouldn't disconnect() on an interface being taken down since there's no SSID configured this way. Signed-off-by:
-
Johannes Berg authored
The new key work for cfg80211 will only give us the WEP key for shared auth to do that authentication, and not via the regular key settings, so we need to be able to encrypt a single frame in software, and that without a key struct. Thus, refactor the WEP code to not require a key structure but use the key, len and idx directly. Signed-off-by:
-
Johannes Berg authored
Sit tight. This shakes up the world as you know it. Let go of your spaghetti tongs, they will no longer be required, the horrible statemachine in net/mac80211/mlme.c is no more... With the cfg80211 SME mac80211 now has much less to keep track of, but, on the other hand, for FT it needs to be able to keep track of at least one authentication being in progress while associated. So convert from a single state machine to having small ones for all the different things we need to do. For real FT it will still need work wrt. PS, but this should be a good step. Signed-off-by:
-
Johannes Berg authored
The ap_capab and last_probe struct members are unused. Signed-off-by:
-
Johannes Berg authored
Since we don't really know that well in the kernel, let's let the SME control whether it wants to use reassociation or not, by allowing it to give the previous BSSID in the associate() parameters. Signed-off-by:
-
Christian Lamparter authored
Larry Finger discovered a weird behavior under load. In essence, the queue's length count under runs, which in turn renders the associated ac queue unusable. Reported-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
-
Christian Lamparter authored
This patch squashes a few old bugs, which have been around since the initial version of p54usb in one form or another. we never freed a orphaned frame, when were denied the resources, which are necessary to pass the data into the usb subsystem. As a result we could end up with a full queue that wasn't emptied, until the device was brought down. Signed-off-by:
-
Johannes Berg authored
We've designed the /dev/rfkill API in a way that we can increase the event struct by adding members at the end, should it become necessary. To validate the events, userspace and the kernel need to have the proper event size to check for -- when reading from the other end they need to verify that it's at least version 1 of the event API, with the current struct size, so define a constant for that and make the code a little more 'future proof'. Not that I expect that we'll have to change the event size any time soon, but it's better to write the code in a way that lends itself to extending. Due to the current size of the event struct, the code is currently equivalent, but should the event struct ever need to be increased the new code might not need changing. Signed-off-by:
-
Bob Copeland authored
"Ath5k: unify resets" introduced a regression into 2.6.28 where the PCU registers are never initialized, due to ath5k_reset() always passing true for change_channel. We subsequently program a lot of these registers but several may start in an unknown state. Cc: stable@kernel.org Reported-by:
Forrest Zhang <forrest@hifulltech.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Bob Copeland authored
Paraphrasing Rafael J. Wysocki: "drivers should not release PCI IRQs in suspend." Doing so causes a warning during suspend/resume on some platforms. Cc: Rafael J. Wysocki <rjw@sisk.pl> Reported-by:
Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by:
-
Bob Copeland authored
'default' case already returns NO_CTL Signed-off-by:
-
Bob Copeland authored
Using the enable_beacon flag allows some simplifications and fixes some corner cases in beacon handling. This change adds a state variable for beaconing in ath5k_beacon_config and handles both enabling and disabling, thus eliminating the need for ath5k_beacon_disable. We also now configure the beacon when any of the beacon parameters change, so ath5k_beacon_reconfig is no longer needed (its mmiowb gets moved to ath5k_beacon_config). Finally, by locking around the whole config function, we don't need to worry about clearing the interrupt mask register before installing the new mask. The upshot is this correctly disables beaconing when the interfaces are taken down, it fixes a potential restarting of beaconing when ath5k_reset() is called, and ensures that updates to the beacon interval take effect immediately. Signed-off-by:
-
Bob Copeland authored
Enable the "Content" After Beacon queue and utilize it to send any buffered frames for power-saving clients. Signed-off-by:
-
Christian Lamparter authored
This patch removes some dead code: p54spi.c:115: warning: ‘p54spi_read16’ defined but not used and while we're at it, p54spi_registers_array is purged as well. Signed-off-by:
-
Christian Lamparter authored
This patch fixes all CHECK_ENDIAN complains: 1. p54/fwio.c:296:6: warning: restricted __le32 degrades to integer p54/fwio.c:296:6: warning: restricted __le32 degrades to integer 2. p54/p54spi.c:172:32: warning: incorrect type in initializer p54spi.c:172:32: expected restricted __le32 [usertype] buffer p54/p54spi.c:172:32: got unsigned int Signed-off-by: -
Samuel Ortiz authored
When connecting to an ESSID manually, we may not set the BSSID, and thus wdev->wext.connect.bssid will be NULL. wdev->current_bss is always updated when a connection is established so we should check it first. Signed-off-by:
Samuel Ortiz <samuel.ortiz@intel.com> Acked-by:
-
Ivo van Doorn authored
Remove the input_polldev from rt2x00 and replace it with the rfkill interface offered by the wiphy structure. This simplifies the entire rfkill handling in rt2x00 and allows us to remove the CONFIG_RT2X00_LIB_RFKILL option and always enables rfkill capabilities. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Johannes Berg authored
According to the documentation, the limit is 0x3f == 63, not 64. Signed-off-by:
-
Helmut Schaa authored
mac80211's software scan implementation uses a passive dwell time of (HZ / 5) which means we stay 200ms on each passive channel. Compared to iwlwifi's hw scan and the old ipw* drivers which use values around 120ms this is quite long. Reducing the passive dwell time from 200ms to 125ms should save us something around a second on cards capable of 11a and we should still be able to catch beacons from most access points (assuming a ~100ms beacon interval). Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Jiri Slaby authored
Don't allow users to open debugfs files, because it can cause oopses. When a user opens some file, driver unlinks it and frees the corresponding structure, we will dereference freed memory. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
Don't allow users to open debugfs files, because it can cause oopses. When a user opens some file, driver unlinks it and frees the corresponding structure, we will dereference freed memory. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Reinette Chatre authored
We want to see the buffer contents when the error occurs without needing to set any debug flags. Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Reinette Chatre authored
Signed-off-by:
-
Reinette Chatre authored
The register locking rework addressed the problem where nic access was obtained incorrectly when PS is enabled. Signed-off-by:
-
Zhu Yi authored
The patch removes B0 hardware support. Nobody is using it anyway. Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Zhu Yi authored
The patch simplifies calibration map by combining the init_calib_map and periodic_calib_map into one calib_map in struct iwm_conf. Now the initial calibration map is stored in the lower 16 bits of calib_map and the periodic calibration map is stored in the higher 16 bits. Signed-off-by:
-
Zhu Yi authored
The patch uses netif_rx_ni() over netif_rx() to post buffers to upper network code because it is always scheduled in a workqueue. The problem was first observed from a dynamic ticks warning: "NOHZ: local_softirq_pending ..." Signed-off-by: -
Joe Perches authored
Signed-off-by:
-
