- 14 Jul, 2020 40 commits
-
-
Hugh Dickins authored
BugLink: https://bugs.launchpad.net/bugs/1887011 [ Upstream commit 243bce09 ] Chris Murphy reports that a slightly overcommitted load, testing swap and zram along with i915, splats and keeps on splatting, when it had better fail less noisily: gnome-shell: page allocation failure: order:0, mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1 Call Trace: dump_stack+0x64/0x88 warn_alloc.cold+0x75/0xd9 __alloc_pages_slowpath.constprop.0+0xcfa/0xd30 __alloc_pages_nodemask+0x2df/0x320 alloc_slab_page+0x195/0x310 allocate_slab+0x3c5/0x440 ___slab_alloc+0x40c/0x5f0 __slab_alloc+0x1c/0x30 kmem_cache_alloc+0x20e/0x220 xas_nomem+0x28/0x70 add_to_swap_cache+0x321/0x400 __read_swap_cache_async+0x105/0x240 swap_cluster_readahead+0x22c/0x2e0 shmem_swapin+0x8e/0xc0 shmem_swapin_page+0x196/0x740 shmem_getpage_gfp+0x3a2/0xa60 shmem_read_mapping_page_gfp+0x32/0x60 shmem_get_pages+0x155/0x5e0 [i915] __i915_gem_object_get_pages+0x68/0xa0 [i915] i915_vma_pin+0x3fe/0x6c0 [i915] eb_add_vma+0x10b/0x2c0 [i915] i915_gem_do_execbuffer+0x704/0x3430 [i915] i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915] drm_ioctl_kernel+0x86/0xd0 [drm] drm_ioctl+0x206/0x390 [drm] ksys_ioctl+0x82/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported on 5.7, but it goes back really to 3.1: when shmem_read_mapping_page_gfp() was implemented for use by i915, and allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but missed swapin's "& GFP_KERNEL" mask for page tree node allocation in __read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits from what page cache uses, but GFP_RECLAIM_MASK is now what's needed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085 Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils Fixes: 68da9f05 ("tmpfs: pass gfp to shmem_getpage_gfp") Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by:
Chris Murphy <lists@colorremedies.com> Analyzed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1887011 [ Upstream commit 432cd2a1 ] When running relocation of a data block group while scrub is running in parallel, it is possible that the relocation will fail and abort the current transaction with an -EINVAL error: [134243.988595] BTRFS info (device sdc): found 14 extents, stage: move data extents [134243.999871] ------------[ cut here ]------------ [134244.000741] BTRFS: Transaction aborted (error -22) [134244.001692] WARNING: CPU: 0 PID: 26954 at fs/btrfs/ctree.c:1071 __btrfs_cow_block+0x6a7/0x790 [btrfs] [134244.003380] Modules linked in: btrfs blake2b_generic xor raid6_pq (...) [134244.012577] CPU: 0 PID: 26954 Comm: btrfs Tainted: G W 5.6.0-rc7-btrfs-next-58 #5 [134244.014162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [134244.016184] RIP: 0010:__btrfs_cow_block+0x6a7/0x790 [btrfs] [134244.017151] Code: 48 c7 c7 (...) [134244.020549] RSP: 0018:ffffa41607863888 EFLAGS: 00010286 [134244.021515] RAX: 0000000000000000 RBX: ffff9614bdfe09c8 RCX: 0000000000000000 [134244.022822] RDX: 0000000000000001 RSI: ffffffffb3d63980 RDI: 0000000000000001 [134244.024124] RBP: ffff961589e8c000 R08: 0000000000000000 R09: 0000000000000001 [134244.025424] R10: ffffffffc0ae5955 R11: 0000000000000000 R12: ffff9614bd530d08 [134244.026725] R13: ffff9614ced41b88 R14: ffff9614bdfe2a48 R15: 0000000000000000 [134244.028024] FS: 00007f29b63c08c0(0000) GS:ffff9615ba600000(0000) knlGS:0000000000000000 [134244.029491] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [134244.030560] CR2: 00007f4eb339b000 CR3: 0000000130d6e006 CR4: 00000000003606f0 [134244.031997] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [134244.033153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [134244.034484] Call Trace: [134244.034984] btrfs_cow_block+0x12b/0x2b0 [btrfs] [134244.035859] do_relocation+0x30b/0x790 [btrfs] [134244.036681] ? do_raw_spin_unlock+0x49/0xc0 [134244.037460] ? _raw_spin_unlock+0x29/0x40 [134244.038235] relocate_tree_blocks+0x37b/0x730 [btrfs] [134244.039245] relocate_block_group+0x388/0x770 [btrfs] [134244.040228] btrfs_relocate_block_group+0x161/0x2e0 [btrfs] [134244.041323] btrfs_relocate_chunk+0x36/0x110 [btrfs] [134244.041345] btrfs_balance+0xc06/0x1860 [btrfs] [134244.043382] ? btrfs_ioctl_balance+0x27c/0x310 [btrfs] [134244.045586] btrfs_ioctl_balance+0x1ed/0x310 [btrfs] [134244.045611] btrfs_ioctl+0x1880/0x3760 [btrfs] [134244.049043] ? do_raw_spin_unlock+0x49/0xc0 [134244.049838] ? _raw_spin_unlock+0x29/0x40 [134244.050587] ? __handle_mm_fault+0x11b3/0x14b0 [134244.051417] ? ksys_ioctl+0x92/0xb0 [134244.052070] ksys_ioctl+0x92/0xb0 [134244.052701] ? trace_hardirqs_off_thunk+0x1a/0x1c [134244.053511] __x64_sys_ioctl+0x16/0x20 [134244.054206] do_syscall_64+0x5c/0x280 [134244.054891] entry_SYSCALL_64_after_hwframe+0x49/0xbe [134244.055819] RIP: 0033:0x7f29b51c9dd7 [134244.056491] Code: 00 00 00 (...) [134244.059767] RSP: 002b:00007ffcccc1dd08 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [134244.061168] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f29b51c9dd7 [134244.062474] RDX: 00007ffcccc1dda0 RSI: 00000000c4009420 RDI: 0000000000000003 [134244.063771] RBP: 0000000000000003 R08: 00005565cea4b000 R09: 0000000000000000 [134244.065032] R10: 0000000000000541 R11: 0000000000000202 R12: 00007ffcccc2060a [134244.066327] R13: 00007ffcccc1dda0 R14: 0000000000000002 R15: 00007ffcccc1dec0 [134244.067626] irq event stamp: 0 [134244.068202] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [134244.069351] hardirqs last disabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020 [134244.070909] softirqs last enabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020 [134244.072392] softirqs last disabled at (0): [<0000000000000000>] 0x0 [134244.073432] ---[ end trace bd7c03622e0b0a99 ]--- The -EINVAL error comes from the following chain of function calls: __btrfs_cow_block() <-- aborts the transaction btrfs_reloc_cow_block() replace_file_extents() get_new_location() <-- returns -EINVAL When relocating a data block group, for each allocated extent of the block group, we preallocate another extent (at prealloc_file_extent_cluster()), associated with the data relocation inode, and then dirty all its pages. These preallocated extents have, and must have, the same size that extents from the data block group being relocated have. Later before we start the relocation stage that updates pointers (bytenr field of file extent items) to point to the the new extents, we trigger writeback for the data relocation inode. The expectation is that writeback will write the pages to the previously preallocated extents, that it follows the NOCOW path. That is generally the case, however, if a scrub is running it may have turned the block group that contains those extents into RO mode, in which case writeback falls back to the COW path. However in the COW path instead of allocating exactly one extent with the expected size, the allocator may end up allocating several smaller extents due to free space fragmentation - because we tell it at cow_file_range() that the minimum allocation size can match the filesystem's sector size. This later breaks the relocation's expectation that an extent associated to a file extent item in the data relocation inode has the same size as the respective extent pointed by a file extent item in another tree - in this case the extent to which the relocation inode poins to is smaller, causing relocation.c:get_new_location() to return -EINVAL. For example, if we are relocating a data block group X that has a logical address of X and the block group has an extent allocated at the logical address X + 128KiB with a size of 64KiB: 1) At prealloc_file_extent_cluster() we allocate an extent for the data relocation inode with a size of 64KiB and associate it to the file offset 128KiB (X + 128KiB - X) of the data relocation inode. This preallocated extent was allocated at block group Z; 2) A scrub running in parallel turns block group Z into RO mode and starts scrubing its extents; 3) Relocation triggers writeback for the data relocation inode; 4) When running delalloc (btrfs_run_delalloc_range()), we try first the NOCOW path because the data relocation inode has BTRFS_INODE_PREALLOC set in its flags. However, because block group Z is in RO mode, the NOCOW path (run_delalloc_nocow()) falls back into the COW path, by calling cow_file_range(); 5) At cow_file_range(), in the first iteration of the while loop we call btrfs_reserve_extent() to allocate a 64KiB extent and pass it a minimum allocation size of 4KiB (fs_info->sectorsize). Due to free space fragmentation, btrfs_reserve_extent() ends up allocating two extents of 32KiB each, each one on a different iteration of that while loop; 6) Writeback of the data relocation inode completes; 7) Relocation proceeds and ends up at relocation.c:replace_file_extents(), with a leaf which has a file extent item that points to the data extent from block group X, that has a logical address (bytenr) of X + 128KiB and a size of 64KiB. Then it calls get_new_location(), which does a lookup in the data relocation tree for a file extent item starting at offset 128KiB (X + 128KiB - X) and belonging to the data relocation inode. It finds a corresponding file extent item, however that item points to an extent that has a size of 32KiB, which doesn't match the expected size of 64KiB, resuling in -EINVAL being returned from this function and propagated up to __btrfs_cow_block(), which aborts the current transaction. To fix this make sure that at cow_file_range() when we call the allocator we pass it a minimum allocation size corresponding the desired extent size if the inode belongs to the data relocation tree, otherwise pass it the filesystem's sector size as the minimum allocation size. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Anand Jain authored
BugLink: https://bugs.launchpad.net/bugs/1887011 [ Upstream commit 3752d22f ] This patch deletes local variable disk_num_bytes as its value is same as num_bytes in the function cow_file_range(). Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Kamal Mostafa authored
BugLink: https://bugs.launchpad.net/bugs/1885932 Ignore: yes Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1885932Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 6de3c9e3 upstream. The quirk function snd_emuusb_set_samplerate() has a NULL check for the mixer element, but this is useless in the current code. It used to be a check against mixer->id_elems[unitid] but it was changed later to the value after mixer_eleme_list_to_info() which is always non-NULL due to the container_of() usage. This patch fixes the check before the conversion. While we're at it, correct a typo in the comment in the function, too. Fixes: 8c558076 ("ALSA: usb-audio: Clean up mixer element list traverse") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dongdong Liu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit deb86999 upstream. HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint. It always advertises an MSI capability, but it can only generate MSIs when in Endpoint mode. The device has the same Vendor and Device IDs in both modes, so check the Class Code and disable MSI only when operating as a Root Port. [bhelgaas: changelog] Fixes: 72f2ff0d ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports") Signed-off-by:
Dongdong Liu <liudongdong3@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Zhou Wang <wangzhou1@hisilicon.com> Cc: stable@vger.kernel.org # v4.11+ Signed-off-by:
-
Olga Kornievskaia authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit d03727b2 upstream. Figuring out the root case for the REMOVE/CLOSE race and suggesting the solution was done by Neil Brown. Currently what happens is that direct IO calls hold a reference on the open context which is decremented as an asynchronous task in the nfs_direct_complete(). Before reference is decremented, control is returned to the application which is free to close the file. When close is being processed, it decrements its reference on the open_context but since directIO still holds one, it doesn't sent a close on the wire. It returns control to the application which is free to do other operations. For instance, it can delete a file. Direct IO is finally releasing its reference and triggering an asynchronous close. Which races with the REMOVE. On the server, REMOVE can be processed before the CLOSE, failing the REMOVE with EACCES as the file is still opened. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Suggested-by:
Neil Brown <neilb@suse.com> CC: stable@vger.kernel.org Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Trond Myklebust authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 8b040137 upstream. If the mirror count changes in the new layout we pick up inside ff_layout_pg_init_write(), then we can end up adding the request to the wrong mirror and corrupting the mirror->pg_list. Fixes: d600ad1f ("NFS41: pop some layoutget errors to application") Cc: stable@vger.kernel.org Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Chuck Lever authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 89a3c9f5 upstream. @subbuf is an output parameter of xdr_buf_subsegment(). A survey of call sites shows that @subbuf is always uninitialized before xdr_buf_segment() is invoked by callers. There are some execution paths through xdr_buf_subsegment() that do not set all of the fields in @subbuf, leaving some pointer fields containing garbage addresses. Subsequent processing of that buffer then results in a page fault. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit b7ade381 upstream. __rpc_depopulate(gssd_dentry) was lost on error path cc: stable@vger.kernel.org Fixes: commit 4b9a445e ("sunrpc: create a new dummy pipe for gssd to hold open") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Denis Efremov authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 35f760b4 upstream. clk_s is checked twice in a row in ni_init_smc_spll_table(). fb_div should be checked instead. Fixes: 69e0b57a ("drm/radeon/kms: add dpm support for cayman (v5)") Cc: stable@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 6784bead upstream. Fix the event trigger to accept redundant spaces in the trigger input. For example, these return -EINVAL echo " traceon" > events/ftrace/print/trigger echo "traceon if common_pid == 0" > events/ftrace/print/trigger echo "disable_event:kmem:kmalloc " > events/ftrace/print/trigger But these are hard to find what is wrong. To fix this issue, use skip_spaces() to remove spaces in front of actual tokens, and set NULL if there is no token. Link: http://lkml.kernel.org/r/159262476352.185015.5261566783045364186.stgit@devnote2 Cc: Tom Zanussi <zanussi@kernel.org> Cc: stable@vger.kernel.org Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Reviewed-by:
Tom Zanussi <zanussi@kernel.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Jiping Ma authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 8dfe804a upstream. A 32-bit perf querying the registers of a compat task using REGS_ABI_32 will receive zeroes from w15, when it expects to find the PC. Return the PC value for register dwarf register 15 when returning register values for a compat task to perf. Cc: <stable@vger.kernel.org> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Jiping Ma <jiping.ma2@windriver.com> Link: https://lore.kernel.org/r/1589165527-188401-1-git-send-email-jiping.ma2@windriver.com [will: Shuffled code and added a comment] Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Junxiao Bi authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit e5a15e17 upstream. The following kernel panic was captured when running nfs server over ocfs2, at that time ocfs2_test_inode_bit() was checking whether one inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its "suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from //global_inode_alloc, but here it wrongly assumed that it was got from per slot inode alloctor which would cause array overflow and trigger kernel panic. BUG: unable to handle kernel paging request at 0000000000001088 IP: [<ffffffff816f6898>] _raw_spin_lock+0x18/0xf0 PGD 1e06ba067 PUD 1e9e7d067 PMD 0 Oops: 0002 [#1] SMP CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2 Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018 RIP: _raw_spin_lock+0x18/0xf0 RSP: e02b:ffff88005ae97908 EFLAGS: 00010206 RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000 RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088 RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00 R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088 R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff FS: 0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660 Call Trace: igrab+0x1e/0x60 ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2] ocfs2_test_inode_bit+0x328/0xa00 [ocfs2] ocfs2_get_parent+0xba/0x3e0 [ocfs2] reconnect_path+0xb5/0x300 exportfs_decode_fh+0xf6/0x2b0 fh_verify+0x350/0x660 [nfsd] nfsd4_putfh+0x4d/0x60 [nfsd] nfsd4_proc_compound+0x3d3/0x6f0 [nfsd] nfsd_dispatch+0xe0/0x290 [nfsd] svc_process_common+0x412/0x6a0 [sunrpc] svc_process+0x123/0x210 [sunrpc] nfsd+0xff/0x170 [nfsd] kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 <f0> 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6 RIP _raw_spin_lock+0x18/0xf0 CR2: 0000000000001088 ---[ end trace 7264463cd1aac8f9 ]--- Kernel panic - not syncing: Fatal exception Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Junxiao Bi authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 9277f833 upstream. In the ocfs2 disk layout, slot number is 16 bits, but in ocfs2 implementation, slot number is 32 bits. Usually this will not cause any issue, because slot number is converted from u16 to u32, but OCFS2_INVALID_SLOT was defined as -1, when an invalid slot number from disk was obtained, its value was (u16)-1, and it was converted to u32. Then the following checking in get_local_system_inode will be always skipped: static struct inode **get_local_system_inode(struct ocfs2_super *osb, int type, u32 slot) { BUG_ON(slot == OCFS2_INVALID_SLOT); ... } Link: http://lkml.kernel.org/r/20200616183829.87211-5-junxiao.bi@oracle.comSigned-off-by:
-
Junxiao Bi authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 7569d3c7 upstream. Set global_inode_alloc as OCFS2_FIRST_ONLINE_SYSTEM_INODE, that will make it load during mount. It can be used to test whether some global/system inodes are valid. One use case is that nfsd will test whether root inode is valid. Link: http://lkml.kernel.org/r/20200616183829.87211-3-junxiao.bi@oracle.comSigned-off-by:
-
Waiman Long authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 8982ae52 upstream. The kzfree() function is normally used to clear some sensitive information, like encryption keys, in the buffer before freeing it back to the pool. Memset() is currently used for buffer clearing. However unlikely, there is still a non-zero probability that the compiler may choose to optimize away the memory clearing especially if LTO is being used in the future. To make sure that this optimization will never happen, memzero_explicit(), which is introduced in v3.18, is now used in kzfree() to future-proof it. Link: http://lkml.kernel.org/r/20200616154311.12314-2-longman@redhat.com Fixes: 3ef0e5ba ("slab: introduce kzfree()") Signed-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: David Howells <dhowells@redhat.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Xiaoyao Li authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit bf10bd0b upstream. Only MSR address range 0x800 through 0x8ff is architecturally reserved and dedicated for accessing APIC registers in x2APIC mode. Fixes: 0105d1a5 ("KVM: x2apic interface to lapic") Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit e6d701dc upstream. When running a kernel with Clang's Control Flow Integrity implemented, there is a violation that happens when accessing /sys/firmware/acpi/pm_profile: $ cat /sys/firmware/acpi/pm_profile 0 $ dmesg ... [ 17.352564] ------------[ cut here ]------------ [ 17.352568] CFI failure (target: acpi_show_profile+0x0/0x8): [ 17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40 [ 17.352573] Modules linked in: [ 17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G W 5.7.0-microsoft-standard+ #1 [ 17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40 [ 17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff [ 17.352577] RSP: 0018:ffffaa6dc3c53d30 EFLAGS: 00010246 [ 17.352578] RAX: 331267e0c06cee00 RBX: ffffffff83d85890 RCX: ffffffff8483a6f8 [ 17.352579] RDX: ffff9cceabbb37c0 RSI: 0000000000000082 RDI: ffffffff84bb9e1c [ 17.352579] RBP: ffffffff845b2bc8 R08: 0000000000000001 R09: ffff9cceabbba200 [ 17.352579] R10: 000000000000019d R11: 0000000000000000 R12: ffff9cc947766f00 [ 17.352580] R13: ffffffff83d6bd50 R14: ffff9ccc6fa80000 R15: ffffffff845bd328 [ 17.352582] FS: 00007fdbc8d13580(0000) GS:ffff9cce91ac0000(0000) knlGS:0000000000000000 [ 17.352582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.352583] CR2: 00007fdbc858e000 CR3: 00000005174d0000 CR4: 0000000000340ea0 [ 17.352584] Call Trace: [ 17.352586] ? rev_id_show+0x8/0x8 [ 17.352587] ? __cfi_check+0x45bac/0x4b640 [ 17.352589] ? kobj_attr_show+0x73/0x80 [ 17.352590] ? sysfs_kf_seq_show+0xc1/0x140 [ 17.352592] ? ext4_seq_options_show.cfi_jt+0x8/0x8 [ 17.352593] ? seq_read+0x180/0x600 [ 17.352595] ? sysfs_create_file_ns.cfi_jt+0x10/0x10 [ 17.352596] ? tlbflush_read_file+0x8/0x8 [ 17.352597] ? __vfs_read+0x6b/0x220 [ 17.352598] ? handle_mm_fault+0xa23/0x11b0 [ 17.352599] ? vfs_read+0xa2/0x130 [ 17.352599] ? ksys_read+0x6a/0xd0 [ 17.352601] ? __do_sys_getpgrp+0x8/0x8 [ 17.352602] ? do_syscall_64+0x72/0x120 [ 17.352603] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 17.352604] ---[ end trace 7b1fa81dc897e419 ]--- When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called, which in turn calls kobj_attr_show, which gets the ->show callback member by calling container_of on attr (casting it to struct kobj_attribute) then calls it. There is a CFI violation because pm_profile_attr is of type struct device_attribute but kobj_attr_show calls ->show expecting it to be from struct kobj_attribute. CFI checking ensures that function pointer types match when doing indirect calls. Fix pm_profile_attr to be defined in terms of kobj_attribute so there is no violation or mismatch. Fixes: 362b6460 ("ACPI: Export FADT pm_profile integer value to userspace") Link: https://github.com/ClangBuiltLinux/linux/issues/1051Reported-by:
yuu ichii <byahu140@heisei.be> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Luis Chamberlain authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 1b0b2836 ] We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktraceSigned-off-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit f2f02ebd ] When cc-option and friends evaluate compiler flags, the temporary file $$TMP is created as an output object, and automatically cleaned up. The actual file path of $$TMP is .<pid>.tmp, here <pid> is the process ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the escape sequence of $$). Such garbage files are cleaned up in most cases, but some compiler flags create additional output files. For example, -gsplit-dwarf creates a .dwo file. When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of .<pid>.dwo files left in the top of build directories. You may not notice them unless you do 'ls -a', but the garbage files will increase every time you run 'make'. This commit changes the temporary object path to .tmp_<pid>/tmp, and removes .tmp_<pid> directory when exiting. Separate build artifacts such as *.dwo will be cleaned up all together because their file paths are usually determined based on the base name of the object. Another example is -ftest-coverage, which outputs the coverage data into <base-name-of-object>.gcno Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Zekun Shen authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit e89df5c4 ] There is a race condition exist during termination. The path is alx_stop and then alx_remove. An alx_schedule_link_check could be called before alx_stop by interrupt handler and invoke alx_link_check later. Alx_stop frees the napis, and alx_remove cancels any pending works. If any of the work is scheduled before termination and invoked before alx_remove, a null-ptr-deref occurs because both expect alx->napis[i]. This patch fix the race condition by moving cancel_work_sync functions before alx_free_napis inside alx_stop. Because interrupt handler can call alx_schedule_link_check again, alx_free_irq is moved before cancel_work_sync calls too. Signed-off-by:
Zekun Shen <bruceshenzk@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Juri Lelli authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 740797ce ] syzbot reported the following warning: WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504 At deadline.c:628 we have: 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se) 624 { 625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se); 626 struct rq *rq = rq_of_dl_rq(dl_rq); 627 628 WARN_ON(dl_se->dl_boosted); 629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline)); [...] } Which means that setup_new_dl_entity() has been called on a task currently boosted. This shouldn't happen though, as setup_new_dl_entity() is only called when the 'dynamic' deadline of the new entity is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this condition. Digging through the PI code I noticed that what above might in fact happen if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the first branch of boosting conditions we check only if a pi_task 'dynamic' deadline is earlier than mutex holder's and in this case we set mutex holder to be dl_boosted. However, since RT 'dynamic' deadlines are only initialized if such tasks get boosted at some point (or if they become DEADLINE of course), in general RT 'dynamic' deadlines are usually equal to 0 and this verifies the aforementioned condition. Fix it by checking that the potential donor task is actually (even if temporary because in turn boosted) running at DEADLINE priority before using its 'dynamic' deadline value. Fixes: 2d3d891d ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com Signed-off-by:
Juri Lelli <juri.lelli@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Tested-by:
Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomainSigned-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 71502846 ] When using ip_set with counters and comment, traffic causes the kernel to panic on 32-bit ARM: Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>] Unhandled fault: alignment exception (0x221) at 0xea08133c PC is at ip_set_match_extensions+0xe0/0x224 [ip_set] The problem occurs when we try to update the 64-bit counters - the faulting address above is not 64-bit aligned. The problem occurs due to the way elements are allocated, for example: set->dsize = ip_set_elem_len(set, tb, 0, 0); map = ip_set_alloc(sizeof(*map) + elements * set->dsize); If the element has a requirement for a member to be 64-bit aligned, and set->dsize is not a multiple of 8, but is a multiple of four, then every odd numbered elements will be misaligned - and hitting an atomic64_add() on that element will cause the kernel to panic. ip_set_elem_len() must return a size that is rounded to the maximum alignment of any extension field stored in the element. This change ensures that is the case. Fixes: 95ad1f4a ("netfilter: ipset: Fix extension alignment") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit e55f3c37 ] If this is in "transceiver" mode the the ->qwork isn't required and is a NULL pointer. This can lead to a NULL dereference when we call destroy_workqueue(udc->qwork). Fixes: 3517c31a ("usb: gadget: mv_udc: use devm_xxx for probe") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
yu kuai authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 586745f1 ] if of_find_device_by_node() succeed, imx_suspend_alloc_ocram() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 1579c7b9 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.") Signed-off-by:
yu kuai <yukuai3@huawei.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Fan Guo authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit a17f4bed ] If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.comSigned-off-by:
Fan Guo <guofan5@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Qiushi Wu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 4ddf4739 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Fixes: 0bb54905 ("efi: Add esrt support") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.eduSigned-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Zhang Xiaoxu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 6b690402 ] CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page cache not update, then the data inconsistent with server, which leads the xfstest generic/008 failed. So we need to remove the local page caches before send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will re-cache it. Fixes: 30175628 ("[SMB3] Enable fallocate -z support for SMB3 mounts") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Cc: stable@vger.kernel.org # v3.17 Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Zhang Xiaoxu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit acc91c2d ] When punch hole success, we also can read old data from file: # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \ -c "fpunch 20 40" -c"pread 20 40" file pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0 pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page caches not updated, then the local page caches inconsistent with server. Also can be found by xfstests generic/316. So, we need to remove the page caches before send the SMB ioctl(FSCTL_SET_ZERO_DATA) to server. Fixes: 31742c5a ("enable fallocate punch hole ("fallocate -p") for SMB3") Suggested-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit b3d71abd ] USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.comSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 220345e9 ] The USB-audio mixer code holds a linked list of usb_mixer_elem_list, and several operations are performed for each mixer element. A few of them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2()) assume each mixer element being a usb_mixer_elem_info object that is a subclass of usb_mixer_elem_list, cast via container_of() and access it members. This may result in an out-of-bound access when a non-standard list element has been added, as spotted by syzkaller recently. This patch adds a new field, is_std_info, in usb_mixer_elem_list to indicate that the element is the usb_mixer_elem_info type or not, and skip the access to such an element if needed. Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 8c558076 ] Introduce a new macro for iterating over mixer element list for avoiding the open codes in many places. Also the open-coded container_of() and the forced cast to struct usb_mixer_elem_info are replaced with another simple macro, too. No functional changes but just readability improvement. Signed-off-by:
-
Daniel Mack authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 191227d9 ] miniDSP USBStreamer UAC2 devices send clock validity changes with the control field set to zero. The current interrupt handler ignores all packets if the control field does not match the mixer element's, but it really should only do that in case that field is needed to distinguish multiple elements with the same ID. This patch implements a logic that lets notifications packets pass if the element ID is unique for a given device. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Julian Scheel authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit b2500b58 ] When an interrupt occurs, the value of at least one of the belonging controls should have changed. To make sure they get re-read from device on the next read, invalidate the cache. This was correctly implemented for uac2 already, but missing for uac1. Signed-off-by:
Julian Scheel <julian@jusst.de> Signed-off-by:
-
Joakim Tjernlund authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 03894573 upstream. USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready, causing garbage chars on the TTY causing stray input to the shell and/or login prompt. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: stable@vger.kernel.org Acked-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.comSigned-off-by:
-
Al Cooper authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit a73d9d9c upstream. Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by:
Al Cooper <alcooperx@gmail.com> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit dceea670 upstream. EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by:
-
Yick W. Tse authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit c9808bbf upstream. fix error "clock source 41 is not valid, cannot use" [] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00 [] New USB device strings: Mfr=1, Product=2, SerialNumber=0 [] Product: DCD-1500RE [] Manufacturer: D & M Holdings Inc. [] [] clock source 41 is not valid, cannot use [] usbcore: registered new interface driver snd-usb-audio Signed-off-by:
Yick W. Tse <y_w_tse@yahoo.com.hk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.comSigned-off-by:
-
