Skip to content

L
linux
Switch branch/tag
  1. 01 Sep, 2016 16 commits
  3. 31 Aug, 2016 13 commits
  5. 24 Aug, 2016 1 commit
  7. 23 Aug, 2016 1 commit
    • Andrew Donnellan's avatar
      powerpc/eeh: eeh_pci_enable(): fix checking of post-request state · 399a4563
      Andrew Donnellan authored 
      [ Upstream commit 949e9b82 ]

In eeh_pci_enable(), after making the request to set the new options, we
call eeh_ops->wait_state() to check that the request finished successfully.

At the moment, if eeh_ops->wait_state() returns 0, we return 0 without
checking that it reflects the expected outcome. This can lead to callers
further up the chain incorrectly assuming the slot has been successfully
unfrozen and continuing to attempt recovery.

On powernv, this will occur if pnv_eeh_get_pe_state() or
pnv_eeh_get_phb_state() return 0, which in turn occurs if the relevant OPAL
call returns OPAL_EEH_STOPPED_MMIO_DMA_FREEZE or
OPAL_EEH_PHB_ERROR respectively.

On pseries, this will occur if pseries_eeh_get_state() returns 0, which in
turn occurs if RTAS reports that the PE is in the MMIO Stopped and DMA
Stopped states.

Obviously, none of these cases represent a successful completion of a
request to thaw MMIO or DMA.

Fix the check so that a wait_state() return value of 0 won't be considered
successful for the EEH_OPT_THAW_MMIO or EEH_OPT_THAW_DMA cases.
Signed-off-by: default avatarAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: default avatarDaniel Axtens <dja@axtens.net>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      399a4563
  9. 22 Aug, 2016 9 commits
    • Sasha Levin's avatar
      Linux 3.18.40 · d45da77c
      Sasha Levin authored 
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      d45da77c
    • Andrey Ryabinin's avatar
      perf/x86: Fix undefined shift on 32-bit kernels · 8f03e30e
      Andrey Ryabinin authored 
      [ Upstream commit 6d6f2833 ]

Jim reported:

	UBSAN: Undefined behaviour in arch/x86/events/intel/core.c:3708:12
	shift exponent 35 is too large for 32-bit type 'long unsigned int'

The use of 'unsigned long' type obviously is not correct here, make it
'unsigned long long' instead.
Reported-by: default avatarJim Cromie <jim.cromie@gmail.com>
Signed-off-by: default avatarAndrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Imre Palik <imrep@amazon.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 2c33645d ("perf/x86: Honor the architectural performance monitoring version")
Link: http://lkml.kernel.org/r/1462974711-10037-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      8f03e30e
    • Ben Hutchings's avatar
      nfsd: check permissions when setting ACLs · 3e287c23
      Ben Hutchings authored 
      [ Upstream commit 99965378 ]

Use set_posix_acl, which includes proper permission checks, instead of
calling ->set_acl directly.  Without this anyone may be able to grant
themselves permissions to a file by setting the ACL.

Lock the inode to make the new checks atomic with respect to set_acl.
(Also, nfsd was the only caller of set_acl not locking the inode, so I
suspect this may fix other races.)

This also simplifies the code, and ensures our ACLs are checked by
posix_acl_valid.

The permission checks and the inode locking were lost with commit
4ac7249e, which changed nfsd to use the set_acl inode operation directly
instead of going through xattr handlers.
Reported-by: default avatarDavid Sinquin <david@sinquin.eu>
[agreunba@redhat.com: use set_posix_acl]
Fixes: 4ac7249e
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      3e287c23
    • Andreas Gruenbacher's avatar
      posix_acl: Add set_posix_acl · 6abbd53f
      Andreas Gruenbacher authored 
      [ Upstream commit 485e71e8 ]

Factor out part of posix_acl_xattr_set into a common function that takes
a posix_acl, which nfsd can also call.

The prototype already exists in include/linux/posix_acl.h.
Signed-off-by: default avatarAndreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      6abbd53f
    • Gavin Shan's avatar
      powerpc/pseries: Fix PCI config address for DDW · 4f143eb4
      Gavin Shan authored 
      [ Upstream commit 8a934efe ]

In commit 8445a87f "powerpc/iommu: Remove the dependency on EEH
struct in DDW mechanism", the PE address was replaced with the PCI
config address in order to remove dependency on EEH. According to PAPR
spec, firmware (pHyp or QEMU) should accept "xxBBSSxx" format PCI config
address, not "xxxxBBSS" provided by the patch. Note that "BB" is PCI bus
number and "SS" is the combination of slot and function number.

This fixes the PCI address passed to DDW RTAS calls.

Fixes: 8445a87f ("powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism")
Cc: stable@vger.kernel.org # v3.4+
Reported-by: default avatarGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: default avatarGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      4f143eb4
    • Guilherme G. Piccoli's avatar
      powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism · 79babf8a
      Guilherme G. Piccoli authored 
      [ Upstream commit 8445a87f ]

Commit 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn")
changed the pci_dn struct by removing its EEH-related members.
As part of this clean-up, DDW mechanism was modified to read the device
configuration address from eeh_dev struct.

As a consequence, now if we disable EEH mechanism on kernel command-line
for example, the DDW mechanism will fail, generating a kernel oops by
dereferencing a NULL pointer (which turns to be the eeh_dev pointer).

This patch just changes the configuration address calculation on DDW
functions to a manual calculation based on pci_dn members instead of
using eeh_dev-based address.

No functional changes were made. This was tested on pSeries, both
in PHyp and qemu guest.

Fixes: 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn")
Cc: stable@vger.kernel.org # v3.4+
Reviewed-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: default avatarGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      79babf8a
    • Vegard Nossum's avatar
      block: fix use-after-free in seq file · 8bc7adaf
      Vegard Nossum authored 
      [ Upstream commit 77da1605 ]

I got a KASAN report of use-after-free:

    ==================================================================
    BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508
    Read of size 8 by task trinity-c1/315
    =============================================================================
    BUG kmalloc-32 (Not tainted): kasan: bad access detected
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315
            ___slab_alloc+0x4f1/0x520
            __slab_alloc.isra.58+0x56/0x80
            kmem_cache_alloc_trace+0x260/0x2a0
            disk_seqf_start+0x66/0x110
            traverse+0x176/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a
    INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315
            __slab_free+0x17a/0x2c0
            kfree+0x20a/0x220
            disk_seqf_stop+0x42/0x50
            traverse+0x3b5/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a

    CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G    B           4.7.0+ #62
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
     ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480
     ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480
     ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970
    Call Trace:
     [<ffffffff81d6ce81>] dump_stack+0x65/0x84
     [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0
     [<ffffffff814704ff>] object_err+0x2f/0x40
     [<ffffffff814754d1>] kasan_report_error+0x221/0x520
     [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40
     [<ffffffff83888161>] klist_iter_exit+0x61/0x70
     [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10
     [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50
     [<ffffffff8151f812>] seq_read+0x4b2/0x11a0
     [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180
     [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210
     [<ffffffff814b4c45>] do_readv_writev+0x565/0x660
     [<ffffffff814b8a17>] vfs_readv+0x67/0xa0
     [<ffffffff814b8de6>] do_preadv+0x126/0x170
     [<ffffffff814b92ec>] SyS_preadv+0xc/0x10

This problem can occur in the following situation:

open()
 - pread()
    - .seq_start()
       - iter = kmalloc() // succeeds
       - seqf->private = iter
    - .seq_stop()
       - kfree(seqf->private)
 - pread()
    - .seq_start()
       - iter = kmalloc() // fails
    - .seq_stop()
       - class_dev_iter_exit(seqf->private) // boom! old pointer

As the comment in disk_seqf_stop() says, stop is called even if start
failed, so we need to reinitialise the private pointer to NULL when seq
iteration stops.

An alternative would be to set the private pointer to NULL when the
kmalloc() in disk_seqf_start() fails.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarVegard Nossum <vegard.nossum@oracle.com>
Acked-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      8bc7adaf
    • James Hogan's avatar
      metag: Fix __cmpxchg_u32 asm constraint for CMP · ddc1102b
      James Hogan authored 
      [ Upstream commit 6154c187 ]

The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect
constraints for the return value which under certain circumstances can
allow an address unit register to be used as the first operand of a CMP
instruction. This isn't a valid instruction however as the encodings
only allow a data unit to be specified. This would result in an
assembler error like the following:

  Error: failed to assemble instruction: "CMP A0.2,D0Ar6"

Fix by changing the constraint from "=&da" (assigned, early clobbered,
data or address unit register) to "=&d" (data unit register only).

The constraint for the second operand, "bd" (an op2 register where op1
is a data unit register and the instruction supports O2R) is already
correct assuming the first operand is a data unit register.

Other cases of CMP in inline asm have had their constraints checked, and
appear to all be fine.

Fixes: 6006c0d8 ("metag: Atomics, locks and bitops")
Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.9.x-
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      ddc1102b
    • Maruthi Srinivas Bayyavarapu's avatar
      ALSA: hda: add AMD Bonaire AZ PCI ID with proper driver caps · 71f1b13f
      Maruthi Srinivas Bayyavarapu authored 
      [ Upstream commit fd48331f ]

This commit fixes garbled audio on Bonaire HDMI
Signed-off-by: default avatarMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      71f1b13f
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7