- 01 Jun, 2018 39 commits
-
-
Tariq Toukan authored
Current LRO implementation in Legacy RQ uses high-order pages. In downstream patches of this series we complete the transition to using only order-0 pages in RX datapath (which was already done in Striding RQ). Unlike the more advanced Striding RQ, Legacy RQ does not make reuse of any non-consumed buffers of non-full LRO sessions, and combining it with order-0 pages has many performance drawbacks. Hence, here we totally remove LRO support in Legacy RQ. This guarantees having no out-of-order completions, which allows using a cyclic work queue (instead of a linked-list) in a downstream patch. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
Get the logic of copying the packet header into the SKB linear part into a generic function. Function does copy length alignment and dma buffer sync. It is currently called only within the MPWQE flow. In a downstream patch, it will be called within the legacy RQ flow as well. Signed-off-by:
-
Tariq Toukan authored
Rename it and pass truesize as an extra argument, as it will be used also in Legacy RQ in a downstream patch. Signed-off-by:
-
Tariq Toukan authored
Make name more generic by dropping MPWRQ from it, as it will be used also in Legacy RQ in a downstream patch. Signed-off-by:
-
Tariq Toukan authored
Instead of maintaining a local copy of skb->len/data and updating it upon every copy to the WQE inline part, just calculate it once when needed, using the ihs. This obsoletes the function mlx5e_tx_skb_pull_inline. Signed-off-by:
-
Ilan Tayari authored
Add handlers for this event to perform graceful teardown of the device. Signed-off-by:
Ilan Tayari <ilant@mellanox.com> Signed-off-by:
Adi Nissim <adin@mellanox.com> Signed-off-by:
-
Adi Nissim authored
The representor MTU was hard coded to 1500 bytes. Allow setting arbitrary MTU values up to the max supported by the FW. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
Increase the aRFS flow table size to 64k so it could contain up to 64k different streams. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
Now, when all channels stats are saved regardless of the channel's state {open, closed}, we can safely remove this indication and the stats spin lock which protects it. Fixes: 76c3810bade3 ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by:Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
The driver can present all SW stats even when the state not opened. Fixed get strings, count and stats to support it. In addition, fix tc2txq to hold a static mapping which doesn't depend on the amount of open channels, and cannot have the same value on two different cells while moving between configurations. Example: - OOB 16 channels - Change to 2 channels, 8 TCs - tc2txq[15][0] == tc2txq[1][7] == 15 This will cause multiple appearances of the same TX index in statistics output. Fixes: 76c3810bade3 ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by: -
Tariq Toukan authored
A call to mlx5e_tx_skb_pull_inline was mistakenly dropped in the cited patch. Get it back. Fixes: 043dc78e ("net/mlx5e: TX, Use actual WQE size for SQ edge fill") Signed-off-by:
-
Tariq Toukan authored
IPoIB WQE size is larger than a single WQEBB. Must not fetch the WQE, and surely not memset it, until it is guaranteed that there are enough WQEBBs available before getting to SQ/frag edge. Fixes: 043dc78e ("net/mlx5e: TX, Use actual WQE size for SQ edge fill") Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Misc. bug fixes & optimizations for HNS3 driver This patch-set presents some bug fixes found out during the internal review and system testing and some small optimizations. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Xi Wang authored
In the update flow of the new PF driver, if a multicast address is in mta table, the VF deletion action will not take effect. This patch adds the VF adaptation according to the new flow of PF'driver. Signed-off-by:
Xi Wang <wangxi11@huawei.com> Reviewed-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Xi Wang authored
In the current process, the multicast MAC is added to both MAC_VLAN table and MTA table, this will reduce the utilization of the resource. This patch improves the process of adding multicast MAC address, the new process starts using the MTA table to add multicast MAC after the MAC_VLAN table is full, and the MTA is disable if it is no longer used. Signed-off-by:
-
Yunsheng Lin authored
when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 4789. This patch fixes it by doing the checksum in software. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
There is a break missing in the switch/case handling in hclge_misc_irq_handle, which causes the log to output uncorrectly. This patch adds the missing break, and change the dev_dbg to dev_warn in order to better catch the error. Fixes: c1a81619 ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by:
-
Yunsheng Lin authored
When resetting, phy_state_machine may be accessing the phy through firmware if the phy is not stopped or disconnected, which will cause firemware timeout problem because the firmware is busy processing the reset request. This patch fixes it by disabling the phy when resetting. Fixes: b940aeae0ed6 ("net: hns3: never send command queue message to IMP when reset") Signed-off-by: -
Yunsheng Lin authored
When hardware sends the HCLGE_VECTOR0_EVENT_RST event through hclge_misc_irq_handle, currently driver enables misc_vector in the interrupt handle, and hardware generates the same interrupt for the same reset event again and again until the reset is complete, which causes hclge_reset running repeatly problem. This patch fixes by enabling the misc_vector after reset is complete. Fixes: 4ed340ab ("net: hns3: Add reset process in hclge_main") Signed-off-by:
-
Yunsheng Lin authored
When hclge_ae_stop is called during resetting, it will cancel the service_task by calling cancel_work_sync, which may cause the service_task to exit without clearing HCLGE_STATE_SERVICE_SCHED bit. If this happens, the service_task will never run again. This patch fixes this problem by clearing it after calling cancel_work_sync in hclge_ae_stop. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Jian Shen authored
When doing function reset or insmod hns3 dirver after rmmod, the entries of mac vlan table are not cleared, which may cause init mac address failed. This patch fixes it by clearing the old mac address when doing function reset or rmmod hns3 driver. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
-
Jian Shen authored
Add checking for new mac address. It doesn't need to config the mac vlan table if it's already in use. Signed-off-by:
-
Peng Li authored
This patch adds support for IFF_ALLMULTI flag to HNS3 PF and VF driver. Signed-off-by:
-
Yunsheng Lin authored
This is only 128 entries for hardware's vf vlan table, when the vf table is full, the firmware will disable the vf vlan filter and return a resp_code of HCLGE_VF_VLAN_NO_ENTRY to driver. This patch checks the if resp_code from firmware is HCLGE_VF_VLAN_NO_ENTRY, if yes, then print a warning and return ok to the caller. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== Test mirror-to-gretap with bridge in UL This patchset adds more tests to the mirror-to-gretap suite where bridge is present in the underlay. Specifically it adds tests for bridge VLAN handling, FDB, and bridge port STP status. In patches #1-#3, the codebase is refactored to support the new tests. In patch #4, an STP test is added to the mirroring library, that will later be called from bridge tests. In patches #5-#8, the test for mirror-to-gretap with an 802.1q bridge in underlay is adapted and more tests are added. In patch #9, an STP test is added to the test suite for mirror-to-gretap with an 802.1d bridge in underlay. ==================== Signed-off-by: -
Petr Machata authored
To test offloading of mirror-to-gretap in mlxsw for cases that a VLAN-unaware bridge is in underlay packet path, test that the STP status of bridge egress port is reflected. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Petr Machata authored
Offloading of mirror-to-gretap in mlxsw is tricky especially in cases when the gretap underlay involves bridges. Add more tests that exercise the bridge handling code: - forbidden_egress tests that check vlan removal on bridge port in the underlay packet path - untagged_egress tests that similarly check "egress untagged" - fdb_roaming tests that check whether learning FDB on a different port is reflected - stp tests for handling port STP status of bridge egress port Signed-off-by:
-
Petr Machata authored
Rename test_gretap_forbidden() and test_ip6gretap_forbidden() to a more specific test_gretap_forbidden_cpu() and test_ip6gretap_forbidden_cpu(). This will make it clearer which is which when further down a patch is introduced that forbids a VLAN on regular bridge port. Signed-off-by:
-
Petr Machata authored
After the final change reestablishes the original configuration, make sure the traffic flows again as it should. Signed-off-by:
-
Petr Machata authored
The "ip6gretap" in the test name refers to the tunnel device type that the test is supposed to be testing. However test_ip6gretap_forbidden() tests, due to a typo, a gretap tunnel. Fix the typo. Signed-off-by:
-
Petr Machata authored
Add a reusable full test that toggles STP state of a given bridge port and checks that the mirroring reacts appropriately. The test will be used by bridge tests in follow-up patches. Signed-off-by:
-
Petr Machata authored
When the VLAN capture is installed on a front panel device and not a soft device, the packets are counted twice: once in fast path, and once after they are trapped to the kernel. Resolve the problem by passing skip_hw flag to vlan_capture_install(). Signed-off-by:
-
Petr Machata authored
Move the function do_test_span_vlan_dir_ips() from mirror_vlan.sh test to a library file mirror_lib.sh to allow reuse. Fill in other entry points similar to other testing functions in mirror_lib.sh, they will be useful in following patches. Signed-off-by:
-
Petr Machata authored
Move vlan_capture_install() and vlan_capture_uninstall() from mirror_vlan.sh test to lib.sh so that it can be reused in other tests. Signed-off-by:
-
Maxime Chevallier authored
As the mvpp2 driver is growing, move this driver to a dedicated directory and split it into several files. Since this driver has a lot of register defines and structure definitions, it can benefit from having all of this into a dedicated header file, named mvpp2.h. A good chunk of the mvpp2 code is dedicated to Header Parser handling, so we introduce mvpp2_prs.h where all Header Parser definitions are located, and mvpp2_prs.c containing the related code. In the same way, mvpp2_cls.h and mvpp2_cls.c are created to contain Classifier and RSS related code. The former 'mvpp2.c' file is renamed 'mvpp2_main.c' so that we can keep the driver binary named 'mvpp2'. This commit is only about spliting the driver into multiple files and doesn't introduce any new function, feature or fix besides removing 'static' keywords when needed. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Vlad Buslov authored
tc_ctl_tfilter handles three netlink message types: RTM_NEWTFILTER, RTM_DELTFILTER, RTM_GETTFILTER. However, implementation of this function involves a lot of branching on specific message type because most of the code is message-specific. This significantly complicates adding new functionality and doesn't provide much benefit of code reuse. Split tc_ctl_tfilter to three standalone functions that handle filter new, delete and get requests. The only truly protocol independent part of tc_ctl_tfilter is code that looks up queue, class, and block. Refactor this code to standalone tcf_block_find function that is used by all three new handlers. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Prashant Bhole authored
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd ("rtnetlink: Remove VLA usage") Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the failover create fail error handling case instead of 0, as done elsewhere in this function. Fixes: ba5e4426 ("virtio_net: Extend virtio to use VF datapath when available") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Kees Cook authored
In the quest to remove all stack VLA usage from the kernel[1], this allocates the maximum size expected for all possible types and adds sanity-checks at both registration and usage to make sure nothing gets out of sync. This matches the proposed VLA solution for nfnetlink[2]. The values chosen here were based on finding assignments for .maxtype and .slave_maxtype and manually counting the enums: slave_maxtype (max 33): IFLA_BRPORT_MAX 33 IFLA_BOND_SLAVE_MAX 9 maxtype (max 45): IFLA_BOND_MAX 28 IFLA_BR_MAX 45 __IFLA_CAIF_HSI_MAX 8 IFLA_CAIF_MAX 4 IFLA_CAN_MAX 16 IFLA_GENEVE_MAX 12 IFLA_GRE_MAX 25 IFLA_GTP_MAX 5 IFLA_HSR_MAX 7 IFLA_IPOIB_MAX 4 IFLA_IPTUN_MAX 21 IFLA_IPVLAN_MAX 3 IFLA_MACSEC_MAX 15 IFLA_MACVLAN_MAX 7 IFLA_PPP_MAX 2 __IFLA_RMNET_MAX 4 IFLA_VLAN_MAX 6 IFLA_VRF_MAX 2 IFLA_VTI_MAX 7 IFLA_VXLAN_MAX 28 VETH_INFO_MAX 2 VXCAN_INFO_MAX 2 This additionally changes maxtype and slave_maxtype fields to unsigned, since they're only ever using positive values. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com [2] https://patchwork.kernel.org/patch/10439647/Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
- 31 May, 2018 1 commit
-
-
Andrew Lunn authored
Make it explicit that either device tree is used or platform data. If neither is available, abort the probe. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 877b7cb0 ("net: dsa: mv88e6xxx: Add minimal platform_data support") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
