The mesh interface can use (in an homogeneous mesh) network coding, a
mechanism that aims to increase the overall network throughput by fusing
multiple packets in one transmission.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The mesh interface can optimize the flooding of multicast packets based on
the content of the global translation tables. To disable this behavior and
use the broadcast-like flooding of the packets, forceflood has to be
enabled.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED attribute. Setting the u8 to zero
will disable this feature (allowing multicast optimizations) and setting it
to something else is enabling this feature (forcing simple flooding).
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

In contrast to other modules, batman-adv allows to set the debug message
verbosity per mesh/soft-interface and not per module (via modparam).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced
when they are forwarded. One of the reductions is the penalty for
traversing an additional hop. This hop_penalty (0-255) defines the
percentage of reduction (0-100%).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The mesh/soft-interface can optimize the handling of DHCP packets. Instead
of flooding them through the whole mesh, it can be forwarded as unicast to
a specific gateway server. The originator which injects the packets in the
mesh has to select (based on sel_class thresholds) a responsible gateway
server. This is done by switching this originator to the gw_mode client.
The servers announce their forwarding bandwidth (download/upload) when the
gw_mode server was selected.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the attributes:

* u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server)
* u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_SEL_CLASS
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The mesh interface can fragment unicast packets when the packet size
exceeds the outgoing slave/hard-interface MTU.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The mesh interface can use a distributed hash table to answer ARP requests
without flooding the request through the whole mesh.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero
will disable this feature and setting it to something else is enabling this
feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The mesh interface can try to detect loops in the same mesh caused by
(indirectly) bridged mesh/soft-interfaces of different nodes. Some of the
loops can also be resolved without breaking the mesh.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero
will disable this feature and setting it to something else is enabling this
feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The mesh interface can use multiple slave/hard-interface ports at the same
time to transport the traffic to other nodes.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_BONDING_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The mesh interface can drop messages between clients to implement a
mesh-wide AP isolation.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and
BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.

This feature also requires that skbuff which should be handled as isolated
are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to
set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK
and BATADV_ATTR_ISOLATION_MASK.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The mesh interface can delay OGM messages to aggregate different ogms
together in a single OGM packet.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.

Beside the mesh/soft-interface specific configuration, the VLANs on top of
the mesh/soft-interface have configuration settings. The genl interface
reflects this by allowing to get/set it using the vlan specific commands
BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN.

The set command BATADV_CMD_SET_MESH will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command
message type that settings might have been changed and what the current
values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.

Beside the mesh/soft-interface specific configuration, the
slave/hard-interface have B.A.T.M.A.N. V specific configuration settings.
The genl interface reflects this by allowing to get/set it using the
hard-interface specific commands.

The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is
reused as get command because it already allow sto dump the content of
other information from the slave/hard-interface which are not yet
configuration specific.

The set command BATADV_CMD_SET_HARDIF will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF
command message type that settings might have been changed and what the
current values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.

The main objects for this configuration is the mesh/soft-interface object.
Its actual object in memory already contains most of the available
configuration settings. The genl interface reflects this by allowing to
get/set it using the mesh specific commands.

The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is
reused as get command because it already provides the content of other
information from the mesh/soft-interface which are not yet configuration
specific.

The set command BATADV_CMD_SET_MESH will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command
message type that settings might have been changed and what the current
values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

The commit ff4c92d8 ("genetlink: introduce pre_doit/post_doit hooks")
intoduced a mechanism to run specific code for doit hooks before/after the
hooks are run. Since all doit hooks are requiring the batadv softif, it
should be retrieved/freed in these helpers to simplify the code.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

checkpatch.pl complains since commit 45e417022023 ("scripts/spelling.txt:
add more spellings to spelling.txt") about an additional spelling mistake
in batman-adv:`

  CHECK: 'reseved' may be misspelled - perhaps 'reserved'?
  #232: FILE: include/uapi/linux/batadv_packet.h:232:
  + * @flags: reseved for routing relevant flags - currently always 0
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

batadv_dat_put_dhcp is creating a new ARP packet via
batadv_dat_arp_create_reply and tries to forward it via
batadv_dat_send_data to different peers in the DHT. The original skb is not
consumed by batadv_dat_send_data and thus has to be consumed by the caller.

Fixes: b61ec31c ("batman-adv: Snoop DHCPACKs for DAT")
Signed-off-by: Martin Weinelt <martin@linuxlounge.net>
[sven@narfation.org: add commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

In a 1000 nodes mesh network (Freifunk Hamburg) we can still see
30KBit/s of ARP traffic (equalling about 25% of all layer two
specific overhead, remaining after some filtering) flooded through
the mesh. These 30KBit/s are mainly ARP Requests from the
gateways / DHCP servers.

By snooping DHCPACKs we can learn about MAC/IP address pairs
in the DHCP range without relying on ARP. This patch is in preparation
to eliminate the need for mesh wide message flooding for IPv4 address
resolution.

Also this allows to quickly update a MAC/IP pair at least in the DHT when
DHCP reassigns an IP address to a new host.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

Pull crypto updates from Herbert Xu:
 "API:
   - Add 1472-byte test to tcrypt for IPsec
   - Reintroduced crypto stats interface with numerous changes
   - Support incremental algorithm dumps

  Algorithms:
   - Add xchacha12/20
   - Add nhpoly1305
   - Add adiantum
   - Add streebog hash
   - Mark cts(cbc(aes)) as FIPS allowed

  Drivers:
   - Improve performance of arm64/chacha20
   - Improve performance of x86/chacha20
   - Add NEON-accelerated nhpoly1305
   - Add SSE2 accelerated nhpoly1305
   - Add AVX2 accelerated nhpoly1305
   - Add support for 192/256-bit keys in gcmaes AVX
   - Add SG support in gcmaes AVX
   - ESN for inline IPsec tx in chcr
   - Add support for CryptoCell 703 in ccree
   - Add support for CryptoCell 713 in ccree
   - Add SM4 support in ccree
   - Add SM3 support in ccree
   - Add support for chacha20 in caam/qi2
   - Add support for chacha20 + poly1305 in caam/jr
   - Add support for chacha20 + poly1305 in caam/qi2
   - Add AEAD cipher support in cavium/nitrox"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits)
  crypto: skcipher - remove remnants of internal IV generators
  crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS
  crypto: salsa20-generic - don't unnecessarily use atomic walk
  crypto: skcipher - add might_sleep() to skcipher_walk_virt()
  crypto: x86/chacha - avoid sleeping under kernel_fpu_begin()
  crypto: cavium/nitrox - Added AEAD cipher support
  crypto: mxc-scc - fix build warnings on ARM64
  crypto: api - document missing stats member
  crypto: user - remove unused dump functions
  crypto: chelsio - Fix wrong error counter increments
  crypto: chelsio - Reset counters on cxgb4 Detach
  crypto: chelsio - Handle PCI shutdown event
  crypto: chelsio - cleanup:send addr as value in function argument
  crypto: chelsio - Use same value for both channel in single WR
  crypto: chelsio - Swap location of AAD and IV sent in WR
  crypto: chelsio - remove set but not used variable 'kctx_len'
  crypto: ux500 - Use proper enum in hash_set_dma_transfer
  crypto: ux500 - Use proper enum in cryp_set_dma_transfer
  crypto: aesni - Add scatter/gather avx stubs, and use them in C
  crypto: aesni - Introduce partial block macro
  ..

Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for ->xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...

Pull modules updates from Jessica Yu:

 - Some modules-related kallsyms cleanups and a kallsyms fix for ARM.

 - Include keys from the secondary keyring in module signature
   verification.

* tag 'modules-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  ARM: module: Fix function kallsyms on Thumb-2
  module: Overwrite st_size instead of st_info
  module: make it clearer when we're handling kallsyms symbols vs exported symbols
  modsign: use all trusted keys to verify module signature

Pull general security subsystem updates from James Morris:
 "The main changes here are Paul Gortmaker's removal of unneccesary
  module.h infrastructure"

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: integrity: partial revert of make ima_main explicitly non-modular
  security: fs: make inode explicitly non-modular
  security: audit and remove any unnecessary uses of module.h
  security: integrity: make evm_main explicitly non-modular
  keys: remove needless modular infrastructure from ecryptfs_format
  security: integrity: make ima_main explicitly non-modular
  tomoyo: fix small typo

Pull selinux patches from Paul Moore:
 "I already used my best holiday pull request lines in the audit pull
  request, so this one is going to be a bit more boring, sorry about
  that. To make up for this, we do have a birthday of sorts to
  celebrate: SELinux turns 18 years old this December. Perhaps not the
  most exciting thing in the world for most people, but I think it's
  safe to say that anyone reading this email doesn't exactly fall into
  the "most people" category.

  Back to business and the pull request itself:

  Ondrej has five patches in this pull request and I lump them into
  three categories: one patch to always allow submounts (using similar
  logic to elsewhere in the kernel), one to fix some issues with the
  SELinux policydb, and the others to cleanup and improve the SELinux
  sidtab.

  The other patches from Alexey and Petr and trivial fixes that are
  adequately described in their respective subject lines.

  With this last pull request of the year, I want to thank everyone who
  has contributed patches, testing, and reviews to the SELinux project
  this year, and the past 18 years. Like any good open source effort,
  SELinux is only as good as the community which supports it, and I'm
  very happy that we have the community we do - thank you all!"

* tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: overhaul sidtab to fix bug and improve performance
  selinux: use separate table for initial SID lookup
  selinux: make "selinux_policycap_names[]" const char *
  selinux: always allow mounting submounts
  selinux: refactor sidtab conversion
  Documentation: Update SELinux reference policy URL
  selinux: policydb - fix byte order and alignment issues

Pull audit updates from Paul Moore:
 "In the finest of holiday of traditions, I have a number of gifts to
  share today. While most of them are re-gifts from others, unlike the
  typical re-gift, these are things you will want in and around your
  tree; I promise.

  This pull request is perhaps a bit larger than our typical PR, but
  most of it comes from Jan's rework of audit's fanotify code; a very
  welcome improvement. We ran this through our normal regression tests,
  as well as some newly created stress tests and everything looks good.

  Richard added a few patches, mostly cleaning up a few things and and
  shortening some of the audit records that we send to userspace; a
  change the userspace folks are quite happy about.

  Finally YueHaibing and I kick in a few patches to simplify things a
  bit and make the code less prone to errors.

  Lastly, I want to say thanks one more time to everyone who has
  contributed patches, testing, and code reviews for the audit subsystem
  over the past year. The project is what it is due to your help and
  contributions - thank you"

* tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (22 commits)
  audit: remove duplicated include from audit.c
  audit: shorten PATH cap values when zero
  audit: use current whenever possible
  audit: minimize our use of audit_log_format()
  audit: remove WATCH and TREE config options
  audit: use session_info helper
  audit: localize audit_log_session_info prototype
  audit: Use 'mark' name for fsnotify_mark variables
  audit: Replace chunk attached to mark instead of replacing mark
  audit: Simplify locking around untag_chunk()
  audit: Drop all unused chunk nodes during deletion
  audit: Guarantee forward progress of chunk untagging
  audit: Allocate fsnotify mark independently of chunk
  audit: Provide helper for dropping mark's chunk reference
  audit: Remove pointless check in insert_hash()
  audit: Factor out chunk replacement code
  audit: Make hash table insertion safe against concurrent lookups
  audit: Embed key into chunk
  audit: Fix possible tagging failures
  audit: Fix possible spurious -ENOSPC error
  ...

Pull printk updates from Petr Mladek:

 - Keep spinlocks busted until the end of panic()

 - Fix races between calculating number of messages that would fit into
   user space buffers, filling the buffers, and switching printk.time
   parameter

 - Some code clean up

* tag 'printk-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: Remove print_prefix() calls with NULL buffer.
  printk: fix printk_time race.
  printk: Make printk_emit() local function.
  panic: avoid deadlocks in re-entrant console drivers

Pull gcc-plugins update from Kees Cook:
 "Both arm and arm64 are gaining per-task stack canaries (to match x86),
  but arm is being done with a gcc plugin, hence it going through the
  gcc-plugins tree.

  New gcc-plugin:

   - Enable per-task stack protector for ARM (Ard Biesheuvel)"

* tag 'gcc-plugins-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ARM: smp: add support for per-task stack canaries

Pull pstore updates from Kees Cook:
 "Improvements and refactorings:

   - Improve compression handling

   - Refactor argument handling during initialization

   - Avoid needless locking for saner EFI backend handling

   - Add more kern-doc and improve debugging output"

* tag 'pstore-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Avoid NULL deref in ftrace merging failure path
  pstore: Convert buf_lock to semaphore
  pstore: Fix bool initialization/comparison
  pstore/ram: Do not treat empty buffers as valid
  pstore/ram: Simplify ramoops_get_next_prz() arguments
  pstore: Map PSTORE_TYPE_* to strings
  pstore: Replace open-coded << with BIT()
  pstore: Improve and update some comments and status output
  pstore/ram: Add kern-doc for struct persistent_ram_zone
  pstore/ram: Report backend assignments with finer granularity
  pstore/ram: Standardize module name in ramoops
  pstore: Avoid duplicate call of persistent_ram_zap()
  pstore: Remove needless lock during console writes
  pstore: Do not use crash buffer for decompression

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Mitigations for Spectre v2 on some Freescale (NXP) CPUs.

   - A large series adding support for pass-through of Nvidia V100 GPUs
     to guests on Power9.

   - Another large series to enable hardware assistance for TLB table
     walk on MPC8xx CPUs.

   - Some preparatory changes to our DMA code, to make way for further
     cleanups from Christoph.

   - Several fixes for our Transactional Memory handling discovered by
     fuzzing the signal return path.

   - Support for generating our system call table(s) from a text file
     like other architectures.

   - A fix to our page fault handler so that instead of generating a
     WARN_ON_ONCE, user accesses of kernel addresses instead print a
     ratelimited and appropriately scary warning.

   - A cosmetic change to make our unhandled page fault messages more
     similar to other arches and also more compact and informative.

   - Freescale updates from Scott:
       "Highlights include elimination of legacy clock bindings use from
        dts files, an 83xx watchdog handler, fixes to old dts interrupt
        errors, and some minor cleanup."

  And many clean-ups, reworks and minor fixes etc.

  Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan,
  Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao,
  Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel
  Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin,
  Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari
  Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen
  N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai,
  Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
  Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen
  Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian
  Tang, Yue Haibing"

* tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits)
  Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask"
  powerpc/zImage: Also check for stdout-path
  powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
  macintosh: Use of_node_name_{eq, prefix} for node name comparisons
  ide: Use of_node_name_eq for node name comparisons
  powerpc: Use of_node_name_eq for node name comparisons
  powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name
  powerpc/mm: Remove very old comment in hash-4k.h
  powerpc/pseries: Fix node leak in update_lmb_associativity_index()
  powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL
  powerpc/dts/fsl: Fix dtc-flagged interrupt errors
  clk: qoriq: add more compatibles strings
  powerpc/fsl: Use new clockgen binding
  powerpc/83xx: handle machine check caused by watchdog timer
  powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved"
  powerpc/fsl_pci: simplify fsl_pci_dma_set_mask
  arch/powerpc/fsl_rmu: Use dma_zalloc_coherent
  vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver
  vfio_pci: Allow regions to add own capabilities
  vfio_pci: Allow mapping extra regions
  ...

Caused by making the variable static:

  kernel/sched/fair.c:119:21: warning: 'capacity_margin' defined but not used [-Wunused-variable]

Seems easiest to just move it up under the existing ifdef CONFIG_SMP
that's a few lines above.

Fixes: ed8885a1 ('sched/fair: Make some variables static')
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 platform update from Ingo Molnar:
 "An OLPC platform support simplification patch"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/olpc: Do not call of_platform_bus_probe()

Pull x86 mm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Update and clean up x86 fault handling, by Andy Lutomirski.

   - Drop usage of __flush_tlb_all() in kernel_physical_mapping_init()
     and related fallout, by Dan Williams.

   - CPA cleanups and reorganization by Peter Zijlstra: simplify the
     flow and remove a few warts.

   - Other misc cleanups"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  x86/mm/dump_pagetables: Use DEFINE_SHOW_ATTRIBUTE()
  x86/mm/cpa: Rename @addrinarray to @numpages
  x86/mm/cpa: Better use CLFLUSHOPT
  x86/mm/cpa: Fold cpa_flush_range() and cpa_flush_array() into a single cpa_flush() function
  x86/mm/cpa: Make cpa_data::numpages invariant
  x86/mm/cpa: Optimize cpa_flush_array() TLB invalidation
  x86/mm/cpa: Simplify the code after making cpa->vaddr invariant
  x86/mm/cpa: Make cpa_data::vaddr invariant
  x86/mm/cpa: Add __cpa_addr() helper
  x86/mm/cpa: Add ARRAY and PAGES_ARRAY selftests
  x86/mm: Drop usage of __flush_tlb_all() in kernel_physical_mapping_init()
  x86/mm: Validate kernel_physical_mapping_init() PTE population
  generic/pgtable: Introduce set_pte_safe()
  generic/pgtable: Introduce {p4d,pgd}_same()
  generic/pgtable: Make {pmd, pud}_same() unconditionally available
  x86/fault: Clean up the page fault oops decoder a bit
  x86/fault: Decode page fault OOPSes better
  x86/vsyscall/64: Use X86_PF constants in the simulated #PF error code
  x86/oops: Show the correct CS value in show_regs()
  x86/fault: Don't try to recover from an implicit supervisor access
  ...

Pull x86 fpu updates from Ingo Molnar:
 "Misc preparatory changes for an upcoming FPU optimization that will
  delay the loading of FPU registers to return-to-userspace"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Don't export __kernel_fpu_{begin,end}()
  x86/fpu: Update comment for __raw_xsave_addr()
  x86/fpu: Add might_fault() to user_insn()
  x86/pkeys: Make init_pkru_value static
  x86/thread_info: Remove _TIF_ALLWORK_MASK
  x86/process/32: Remove asm/math_emu.h include
  x86/fpu: Use unsigned long long shift in xfeature_uncompacted_offset()

Pull x86 cpu updates from Ingo Molnar:
 "Misc changes:

   - Fix nr_cpus= boot option interaction bug with logical package
     management

   - Clean up UMIP detection messages

   - Add WBNOINVD instruction detection

   - Remove the unused get_scattered_cpuid_leaf() function"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology: Use total_cpus for max logical packages calculation
  x86/umip: Make the UMIP activated message generic
  x86/umip: Print UMIP line only once
  x86/cpufeatures: Add WBNOINVD feature definition
  x86/cpufeatures: Remove get_scattered_cpuid_leaf()

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Remove trampoline_handler() prototype
  x86/kernel: Fix more -Wmissing-prototypes warnings
  x86: Fix various typos in comments
  x86/headers: Fix -Wmissing-prototypes warning
  x86/process: Avoid unnecessary NULL check in get_wchan()
  x86/traps: Complete prototype declarations
  x86/mce: Fix -Wmissing-prototypes warnings
  x86/gart: Rewrite early_gart_iommu_check() comment

Pull x86 build updates from Ingo Molnar:

 - Resolve LLVM build bug by removing redundant GNU specific flag

 - Remove obsolete -funit-at-a-time and -fno-unit-at-a-time use from x86
   PowerPC and UM.

   The UML change was seen and acked by UML maintainer Richard
   Weinberger.

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/um/vdso: Drop implicit common-page-size linker flag
  x86, powerpc: Remove -funit-at-a-time compiler option entirely
  x86/um: Remove -fno-unit-at-a-time workaround for pre-4.0 GCC

Pull x86 boot updates from Ingo Molnar:
 "Two cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Add missing va_end() to die()
  x86/boot: Simplify the detect_memory*() control flow

Pull x86 asm updates from Ingo Molnar:
 "Two changes:

   - Remove (some) remnants of the vDSO's fake section table mechanism
     that were left behind when the vDSO build process reverted to using
     "objdump -S" to strip the userspace image.

   - Remove hardcoded POPCNT mnemonics now that the minimum binutils
     version supports the symbolic form"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Remove a stale/misleading comment from the linker script
  x86/vdso: Remove obsolete "fake section table" reservation
  x86: Use POPCNT mnemonics in arch_hweight.h

Pull x86 AMD northbridge updates from Ingo Molnar:
 "Update DF/SMN access and k10temp for AMD F17h M30h, by Brian Woods:

   'Updates the data fabric/system management network code needed to get
    k10temp working for M30h. Since there are now processors which have
    multiple roots per DF/SMN interface, there needs to some logic which
    skips N-1 root complexes per DF/SMN interface. This is because the
    root complexes per interface are redundant (as far as DF/SMN goes).
    These changes shouldn't effect past processors and, for F17h M0Xh,
    the mappings stay the same.'

  The hwmon changes were seen and acked by hwmon maintainer Guenter Roeck"

* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hwmon/k10temp: Add support for AMD family 17h, model 30h CPUs
  x86/amd_nb: Add PCI device IDs for family 17h, model 30h
  x86/amd_nb: Add support for newer PCI topologies
  hwmon/k10temp, x86/amd_nb: Consolidate shared device IDs