- 14 Feb, 2013 5 commits
-
-
Vlad Yasevich authored
Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
When bridge forwards a frame, make sure that a frame is allowed to egress on that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Feb, 2013 15 commits
-
-
Daniel Borkmann authored
In order to avoid any future surprises of kernel panics due to jprobes function mismatches (as e.g. fixed in 4cb9d6ea: sctp: jsctp_sf_eat_sack: fix jprobes function signature mismatch), we should check both function types during build and scream loudly if they do not match. __same_type resolves to __builtin_types_compatible_p, which is 1 in case both types are the same and 0 otherwise, qualifiers are ignored. Tested by myself. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
The function jsctp_sf_eat_sack can be made static, no need to extend its visibility. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
Some callers may want to know if PHY write succeed. Also make PHY functions static, they are not exported anywhere. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
The current code expects that the last word (with valid bit) of an MCC compl is DMAed in one shot. This may not be the case. Remove this assertion. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cyril Roelandt authored
cpdma_chan_destroy() on a NULL pointer is a no-op, so the NULL check in cpdma_ctlr_destroy() can safely be removed. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Patch cef401de (net: fix possible wrong checksum generation) fixed wrong checksum calculation but it broke TSO by defining new GSO type but not a netdev feature for that type. net_gso_ok() would not allow hardware checksum/segmentation offload of such packets without the feature. Following patch fixes TSO and wrong checksum. This patch uses same logic that Eric Dumazet used. Patch introduces new flag SKBTX_SHARED_FRAG if at least one frag can be modified by the user. but SKBTX_SHARED_FRAG flag is kept in skb shared info tx_flags rather than gso_type. tx_flags is better compared to gso_type since we can have skb with shared frag without gso packet. It does not link SHARED_FRAG to GSO, So there is no need to define netdev feature for this. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrey Vagin says: ==================== If a TCP socket will get live-migrated from one box to another the timestamps (which are typically ON) will get screwed up -- the new kernel will generate TS values that has nothing to do with what they were on dump. The solution is to yet again fix the kernel and put a "timestamp offset" on a socket. A socket offset is added in places where externally visible tcp timestamp option is parsed/initialized. Connections in the SYN_RECV state are not supported, global tcp_time_stamp is used for them, because repair mode doesn't support this state. In a future it can be implemented by the similar way as for TIME_WAIT sockets. For time-wait sockets offset is inhereted by a proper tcp_sock. A per-socket offset can be set only for sockets in repair mode. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrey Vagin authored
A socket timestamp is a sum of the global tcp_time_stamp and a per-socket offset. A socket offset is added in places where externally visible tcp timestamp option is parsed/initialized. Connections in the SYN_RECV state are not supported, global tcp_time_stamp is used for them, because repair mode doesn't support this state. In a future it can be implemented by the similar way as for TIME_WAIT sockets. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrey Vagin authored
A timestamp can be set, only if a socket is in the repair mode. This patch adds a new socket option TCP_TIMESTAMP, which allows to get and set current tcp times stamp. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrey Vagin authored
This functionality is used for restoring tcp sockets. A tcp timestamp depends on how long a system has been running, so it's differ for each host. The solution is to set a per-socket offset. A per-socket offset for a TIME_WAIT socket is inherited from a proper tcp socket. tcp_request_sock doesn't have a timestamp offset, because the repair mode for them are not implemented. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxDavid S. Miller authored
Paul Gortmaker says: ==================== Eric noticed that the handling of local u64 ethtool counters for this driver commonly found on Freescale ppc-32 boards was racy. However, before converting them over to atomic64_t, I noticed that an internal struct was being used to determine the offsets for exporting this data into the ethtool buffer, and in doing so, it assumed that the counters would always be u64. Rather than keep this implicit assumption, a simple code cleanup gets rid of the struct completely, and leaves less conversion sites. The alternative solution would have been to take advantage of the fact that the counters are all relating to error conditions, and hence make them internally u32. In doing so, we'd be assuming that U32_MAX of any particular error condition is highly unlikely. This might have made sense if any increments were in a hot path. Tested with "ethtool -S eth0" on sbc8548 board. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
Dan Carpenter contacted me with some notes regarding some smatch warnings in the netpoll code, some of which I introduced with my recent netpoll locking fixes, some which were there prior. Specifically they were: net-next/net/core/netpoll.c:243 netpoll_poll_dev() warn: inconsistent returns mutex:&ni->dev_lock: locked (213,217) unlocked (210,243) net-next/net/core/netpoll.c:706 netpoll_neigh_reply() warn: potential pointer math issue ('skb_transport_header(send_skb)' is a 128 bit pointer) This patch corrects the locking imbalance (the first error), and adds some parenthesis to correct the second error. Tested by myself. Applies to net-next Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Dan Carpenter <dan.carpenter@oracle.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
James Hogan authored
I get the following build error on next-20130213 due to the following commit: commit f05de73b ("skbuff: create skb_panic() function and its wrappers"). It adds an argument called panic to a function that uses the BUG() macro which tries to call panic, but the argument masks the panic() function declaration, resulting in the following error (gcc 4.2.4): net/core/skbuff.c In function 'skb_panic': net/core/skbuff.c +126 : error: called object 'panic' is not a function This is fixed by renaming the argument to msg. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jean Sacren <sakiwit@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
While looking at some asm dump for an unrelated change, Eric noticed in the following stats count increment code: 50b8: 81 3c 01 f8 lwz r9,504(r28) 50bc: 81 5c 01 fc lwz r10,508(r28) 50c0: 31 4a 00 01 addic r10,r10,1 50c4: 7d 29 01 94 addze r9,r9 50c8: 91 3c 01 f8 stw r9,504(r28) 50cc: 91 5c 01 fc stw r10,508(r28) that a 64 bit counter was used on ppc-32 without sync and hence the "ethtool -S" output was racy. Here we convert all the values to use atomic64_t so that the output will always be consistent. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Paul Gortmaker authored
The gfar_stats struct is only used in copying out data via ethtool. It is declared as the extra stats, followed by the rmon stats. However, the rmon stats are never actually ever used in the driver; instead the rmon data is a u32 register read that is cast directly into the ethtool buf. It seems the only reason rmon is in the struct at all is to give the offset(s) at which it should be exported into the ethtool buffer. But note gfar_stats doesn't contain a gfar_extra_stats as a substruct -- instead it contains a u64 array of equal element count. This implicitly means we have two independent declarations of what gfar_extra_stats really is. Rather than have this duality, we already have defines which give us the offset directly, and hence do not need the struct at all. Further, since we know the extra_stats is unconditionally always present, we can write it out to the ethtool buf 1st, and then optionally write out the rmon data. There is no need for two independent loops, both of which are simply copying out the extra_stats to buf offset zero. This also helps pave the way towards allowing the extra stats fields to be converted to atomic64_t values, without having their types directly influencing the ethtool stats export code (gfar_fill_stats) that expects to deal with u64. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
- 12 Feb, 2013 20 commits
-
-
Jiri Pirko authored
Current act_police uses rate table computed by the "tc" userspace program, which has the following issue: The rate table has 256 entries to map packet lengths to token (time units). With TSO sized packets, the 256 entry granularity leads to loss/gain of rate, making the token bucket inaccurate. Thus, instead of relying on rate table, this patch explicitly computes the time and accounts for packet transmission times with nanosecond granularity. This is a followup to 56b765b7 ("htb: improved accuracy at high rates"). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
It's not used anywhere else, so move it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Current TBF uses rate table computed by the "tc" userspace program, which has the following issue: The rate table has 256 entries to map packet lengths to token (time units). With TSO sized packets, the 256 entry granularity leads to loss/gain of rate, making the token bucket inaccurate. Thus, instead of relying on rate table, this patch explicitly computes the time and accounts for packet transmission times with nanosecond granularity. This is a followup to 56b765b7 ("htb: improved accuracy at high rates"). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
tbf will need to schedule watchdog in ns. No need to convert it twice. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
As it is going to be used in tbf as well, push these to generic code. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
These are in ns so convert from ticks to ns. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
These are initialized correctly a couple of lines later in the function. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c The bnx2x gso_type setting bug fix in 'net' conflicted with changes in 'net-next' that broke the gso_* setting logic out into a seperate function, which also fixes the bug in question. Thus, use the 'net-next' version. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
in htb_change_class() cl->buffer and cl->buffer are stored in ns. So in dump, convert them back to psched ticks. Note this was introduced by: commit 56b765b7 htb: improved accuracy at high rates Please consider this for -net/-stable. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Roese authored
Until now, the MPC5200 FEC ethernet driver relied upon the bootloader (U-Boot) to write the MAC address into the ethernet controller registers. The Linux driver should not rely on such a thing. So lets read the MAC address from the DT as it should be done here. The following priority is now used to read the MAC address: 1) First, try OF node MAC address, if not present or invalid, then: 2) Read from MAC address registers, if invalid, then: 3) Log a warning message, and choose a random MAC address. This fixes a problem with a MPC5200 board that uses the SPL U-Boot version without FEC initialization before Linux booting for boot speedup. Additionally a status line is now be printed upon successful driver probing, also displaying this MAC address. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vipul Pandya authored
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
The CPSW switch can act as Dual EMAC by segregating the switch ports using VLAN and port VLAN as per the TRM description in 14.3.2.10.2 Dual Mac Mode Following CPSW components will be common for both the interfaces. * Interrupt source is common for both eth interfaces * Interrupt pacing is common for both interfaces * Hardware statistics is common for all the ports * CPDMA is common for both eth interface * CPTS is common for both the interface and it should not be enabled on both the interface as timestamping information doesn't contain port information. Constrains * Reserved VID of One port should not be used in other interface which will enable switching functionality * Same VID must not be used in both the interface which will enable switching functionality Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
As CPTS is common module for both EMAC in Dual EMAC mode so making cpts as pointer. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
* Introduced parameter to add port number for directed packet in cpdma_chan_submit * Source port detection macro with DMA descriptor status Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Here is another handful of late-breaking fixes intended for the 3.8 stream... Hopefully the will still make it! :-) There are three mac80211 fixes pulled from Johannes: "Here are three fixes still for the 3.8 stream, the fix from Cong Ding for the bad sizeof (Stephen Hemminger had pointed it out before but I'd promptly forgotten), a mac80211 managed-mode channel context usage fix where a downgrade would never stop until reaching non-HT and a bug in the channel determination that could cause invalid channels like HT40+ on channel 11 to be used." Also included is a mwl8k fix that avoids an oops when using mwl8k devices that only support the 5 GHz band. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
The original fix that was applied for setting gso_type required more change than necessary because it was assumed ixgbe does RSC on IPv6 frames and this is not correct. RSC is only supported with IPv4/TCP frames only. As such we can simplify the fix and avoid the unnecessary move of eth_type_trans. The previous patch "ixgbe: fix gso type" and this patch reduce the entire fix to one line that sets gso_type to TCPV4 if the frame is RSC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Tommi was fuzzing with trinity and reported the following problem : commit 3f518bf7 (datagram: Add offset argument to __skb_recv_datagram) missed that a raw socket receive queue can contain skbs with no payload. We can loop in __skb_recv_datagram() with MSG_PEEK mode, because wait_for_packet() is not prepared to skip these skbs. [ 83.541011] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=26002 jiffies, g=27673, c=27672, q=75) [ 83.541011] INFO: Stall ended before state dump start [ 108.067010] BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child31:2847] ... [ 108.067010] Call Trace: [ 108.067010] [<ffffffff818cc103>] __skb_recv_datagram+0x1a3/0x3b0 [ 108.067010] [<ffffffff818cc33d>] skb_recv_datagram+0x2d/0x30 [ 108.067010] [<ffffffff819ed43d>] rawv6_recvmsg+0xad/0x240 [ 108.067010] [<ffffffff818c4b04>] sock_common_recvmsg+0x34/0x50 [ 108.067010] [<ffffffff818bc8ec>] sock_recvmsg+0xbc/0xf0 [ 108.067010] [<ffffffff818bf31e>] sys_recvfrom+0xde/0x150 [ 108.067010] [<ffffffff81ca4329>] system_call_fastpath+0x16/0x1b Reported-by: Tommi Rantala <tt.rantala@gmail.com> Tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Vlad says: The whole multiple cookie keys code is completely unused and has been all this time. Noone uses anything other then the secret_key[0] since there is no changeover support anywhere. Thus, for now clean up its left-over fragments. Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-