1. 23 May, 2008 13 commits
    • Steven Rostedt's avatar
      ftrace: trace preempt off critical timings · 6cd8a4bb
      Steven Rostedt authored
      Add preempt off timings. A lot of kernel core code is taken from the RT patch
      latency trace that was written by Ingo Molnar.
      
      This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers
      
      Now instead of just tracing irqs off, preemption off can be selected
      to be recorded.
      
      When this is selected, it shares the same files as irqs off timings.
      One can either trace preemption off, irqs off, or one or the other off.
      
      By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording
      of preempt off only is performed. "irqsoff" will only record the time
      irqs are disabled, but "preemptirqsoff" will take the total time irqs
      or preemption are disabled. Runtime switching of these options is now
      supported by simpling echoing in the appropriate trace name into
      /debugfs/tracing/current_tracer.
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      6cd8a4bb
    • Steven Rostedt's avatar
      ftrace: trace irq disabled critical timings · 81d68a96
      Steven Rostedt authored
      This patch adds latency tracing for critical timings
      (how long interrupts are disabled for).
      
       "irqsoff" is added to /debugfs/tracing/available_tracers
      
      Note:
        tracing_max_latency
          also holds the max latency for irqsoff (in usecs).
         (default to large number so one must start latency tracing)
      
        tracing_thresh
          threshold (in usecs) to always print out if irqs off
          is detected to be longer than stated here.
          If irq_thresh is non-zero, then max_irq_latency
          is ignored.
      
      Here's an example of a trace with ftrace_enabled = 0
      
      =======
      preemption latency trace v1.1.5 on 2.6.24-rc7
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      --------------------------------------------------------------------
       latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
          -----------------
          | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
          -----------------
       => started at: _spin_lock_irqsave+0x2a/0xb7
       => ended at:   _spin_unlock_irqrestore+0x32/0x5f
      
                       _------=> CPU#
                      / _-----=> irqs-off
                     | / _----=> need-resched
                     || / _---=> hardirq/softirq
                     ||| / _--=> preempt-depth
                     |||| /
                     |||||     delay
         cmd     pid ||||| time  |   caller
            \   /    |||||   \   |   /
       swapper-0     1d.s3    0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
       swapper-0     1d.s3  100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
       swapper-0     1d.s3  100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)
      
      vim:ft=help
      =======
      
      And this is a trace with ftrace_enabled == 1
      
      =======
      preemption latency trace v1.1.5 on 2.6.24-rc7
      --------------------------------------------------------------------
       latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
          -----------------
          | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
          -----------------
       => started at: _spin_lock_irqsave+0x2a/0xb7
       => ended at:   _spin_unlock_irqrestore+0x32/0x5f
      
                       _------=> CPU#
                      / _-----=> irqs-off
                     | / _----=> need-resched
                     || / _---=> hardirq/softirq
                     ||| / _--=> preempt-depth
                     |||| /
                     |||||     delay
         cmd     pid ||||| time  |   caller
            \   /    |||||   \   |   /
       swapper-0     1dNs3    0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
       swapper-0     1dNs3   46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000])
       swapper-0     1dNs3   46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000])
       swapper-0     1dNs3   46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000])
       swapper-0     1dNs3   47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000])
       swapper-0     1dNs3   47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47)
       swapper-0     1dNs3   97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50)
       swapper-0     1dNs3   98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000])
       swapper-0     1dNs3   99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000])
       swapper-0     1dNs3  101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000])
       swapper-0     1dNs3  102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
       swapper-0     1dNs3  102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)
      
      vim:ft=help
      =======
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      81d68a96
    • Steven Rostedt's avatar
      ftrace: tracer for scheduler wakeup latency · 352ad25a
      Steven Rostedt authored
      This patch adds the tracer that tracks the wakeup latency of the
      highest priority waking task.
      
        "wakeup" is added to /debugfs/tracing/available_tracers
      
      Also added to /debugfs/tracing
      
        tracing_max_latency
           holds the current max latency for the wakeup
      
        wakeup_thresh
           if set to other than zero, a log will be recorded
           for every wakeup that takes longer than the number
           entered in here (usecs for all counters)
           (deletes previous trace)
      
      Examples:
      
        (with ftrace_enabled = 0)
      
      ============
      preemption latency trace v1.1.5 on 2.6.24-rc8
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      --------------------------------------------------------------------
       latency: 26 us, #2/2, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
          -----------------
          | task: migration/0-3 (uid:0 nice:-5 policy:1 rt_prio:99)
          -----------------
      
                       _------=> CPU#
                      / _-----=> irqs-off
                     | / _----=> need-resched
                     || / _---=> hardirq/softirq
                     ||| / _--=> preempt-depth
                     |||| /
                     |||||     delay
         cmd     pid ||||| time  |   caller
            \   /    |||||   \   |   /
         quilt-8551  0d..3    0us+: wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>)
         quilt-8551  0d..4   26us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>)
      
      vim:ft=help
      ============
      
        (with ftrace_enabled = 1)
      
      ============
      preemption latency trace v1.1.5 on 2.6.24-rc8
      --------------------------------------------------------------------
       latency: 36 us, #45/45, CPU#0 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
          -----------------
          | task: migration/1-5 (uid:0 nice:-5 policy:1 rt_prio:99)
          -----------------
      
                       _------=> CPU#
                      / _-----=> irqs-off
                     | / _----=> need-resched
                     || / _---=> hardirq/softirq
                     ||| / _--=> preempt-depth
                     |||| /
                     |||||     delay
         cmd     pid ||||| time  |   caller
            \   /    |||||   \   |   /
          bash-10653 1d..3    0us : wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>)
          bash-10653 1d..3    1us : try_to_wake_up+0x271/0x2e7 <ffffffff80233dcf> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>)
          bash-10653 1d..2    2us : try_to_wake_up+0x296/0x2e7 <ffffffff80233df4> (update_rq_clock+0x9/0x20 <ffffffff802303f3>)
          bash-10653 1d..2    2us : update_rq_clock+0x1e/0x20 <ffffffff80230408> (__update_rq_clock+0xc/0x90 <ffffffff80230366>)
          bash-10653 1d..2    3us : __update_rq_clock+0x1b/0x90 <ffffffff80230375> (sched_clock+0x9/0x29 <ffffffff80214529>)
          bash-10653 1d..2    4us : try_to_wake_up+0x2a6/0x2e7 <ffffffff80233e04> (activate_task+0xc/0x3f <ffffffff8022ffca>)
          bash-10653 1d..2    4us : activate_task+0x2d/0x3f <ffffffff8022ffeb> (enqueue_task+0xe/0x66 <ffffffff8022ff66>)
          bash-10653 1d..2    5us : enqueue_task+0x5b/0x66 <ffffffff8022ffb3> (enqueue_task_rt+0x9/0x3c <ffffffff80233351>)
          bash-10653 1d..2    6us : try_to_wake_up+0x2ba/0x2e7 <ffffffff80233e18> (check_preempt_wakeup+0x12/0x99 <ffffffff80234f84>)
      [...]
          bash-10653 1d..5   33us : tracing_record_cmdline+0xcf/0xd4 <ffffffff80338aad> (_spin_unlock+0x9/0x33 <ffffffff8048d3ec>)
          bash-10653 1d..5   34us : _spin_unlock+0x19/0x33 <ffffffff8048d3fc> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>)
          bash-10653 1d..4   35us : wakeup_sched_switch+0x65/0x2ff <ffffffff80339f66> (_spin_lock_irqsave+0xc/0xa9 <ffffffff8048d08b>)
          bash-10653 1d..4   35us : _spin_lock_irqsave+0x19/0xa9 <ffffffff8048d098> (add_preempt_count+0xe/0x77 <ffffffff8023311a>)
          bash-10653 1d..4   36us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>)
      
      vim:ft=help
      ============
      
      The [...] was added here to not waste your email box space.
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      352ad25a
    • Steven Rostedt's avatar
      ftrace: add tracing of context switches · 35e8e302
      Steven Rostedt authored
      This patch adds context switch tracing, of the format of:
      
                        _------=> CPU#
                       / _-----=> irqs-off
                      | / _----=> need-resched
                      || / _---=> hardirq/softirq
                      ||| / _--=> preempt-depth
                      |||| /
                      |||||     delay
          cmd     pid ||||| time  |      pid:prio:state
             \   /    |||||   \   |      /
        swapper-0     1d..3    137us+:  0:140:R --> 2912:120
           sshd-2912  1d..3    216us+:  2912:120:S --> 0:140
        swapper-0     1d..3    261us+:  0:140:R --> 2912:120
           bash-2920  0d..3    267us+:  2920:120:S --> 0:140
           sshd-2912  1d..3    330us!:  2912:120:S --> 0:140
        swapper-0     1d..3   2389us+:  0:140:R --> 2847:120
       yum-upda-2847  1d..3   2411us!:  2847:120:S --> 0:140
        swapper-0     0d..3  11089us+:  0:140:R --> 3139:120
       gdm-bina-3139  0d..3  11113us!:  3139:120:S --> 0:140
        swapper-0     1d..3 102328us+:  0:140:R --> 2847:120
       yum-upda-2847  1d..3 102348us!:  2847:120:S --> 0:140
      
       "sched_switch" is added to /debugfs/tracing/available_tracers
      
      [ Eugene Teo <eugeneteo@kernel.sg: remove unused tracing_sched_switch_enabled ]
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      35e8e302
    • Steven Rostedt's avatar
      ftrace: function tracer · 1b29b018
      Steven Rostedt authored
      This is a simple trace that uses the ftrace infrastructure. It is
      designed to be fast and small, and easy to use. It is useful to
      record things that happen over a very short period of time, and
      not to analyze the system in general.
      
       Updates:
      
        available_tracers
           "function" is added to this file.
      
        current_tracer
          To enable the function tracer:
      
            echo function > /debugfs/tracing/current_tracer
      
           To disable the tracer:
      
             echo disable > /debugfs/tracing/current_tracer
      
      The output of the function_trace file is as follows
      
        "echo noverbose > /debugfs/tracing/iter_ctrl"
      
      preemption latency trace v1.1.5 on 2.6.24-rc7-tst
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      --------------------------------------------------------------------
       latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
          -----------------
          | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
          -----------------
      
                       _------=> CPU#
                      / _-----=> irqs-off
                     | / _----=> need-resched
                     || / _---=> hardirq/softirq
                     ||| / _--=> preempt-depth
                     |||| /
                     |||||     delay
         cmd     pid ||||| time  |   caller
            \   /    |||||   \   |   /
       swapper-0     0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
       swapper-0     0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
      
      Or with verbose turned on:
      
        "echo verbose > /debugfs/tracing/iter_ctrl"
      
      preemption latency trace v1.1.5 on 2.6.24-rc7-tst
      --------------------------------------------------------------------
       latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
          -----------------
          | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
          -----------------
      
               swapper     0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
               swapper     0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
               swapper     0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
      
      The "trace" file is not affected by the verbose mode, but is by the symonly.
      
       echo "nosymonly" > /debugfs/tracing/iter_ctrl
      
      tracer:
      [   81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
      [   81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
      [   81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
      [   81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
      [   81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
      [   81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
      [   81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
      
       echo "symonly" > /debugfs/tracing/iter_ctrl
      
      tracer:
      [   81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
      [   81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
      [   81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
      [   81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
      [   81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
      [   81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
      [   81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@ghostprotocols.net>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      1b29b018
    • Steven Rostedt's avatar
      ftrace: latency tracer infrastructure · bc0c38d1
      Steven Rostedt authored
      This patch adds the latency tracer infrastructure. This patch
      does not add anything that will select and turn it on, but will
      be used by later patches.
      
      If it were to be compiled, it would add the following files
      to the debugfs:
      
       The root tracing directory:
      
        /debugfs/tracing/
      
      This patch also adds the following files:
      
        available_tracers
           list of available tracers. Currently no tracers are
           available. Looking into this file only shows
           "none" which is used to unregister all tracers.
      
        current_tracer
           The trace that is currently active. Empty on start up.
           To switch to a tracer simply echo one of the tracers that
           are listed in available_tracers:
      
         example: (used with later patches)
      
            echo function > /debugfs/tracing/current_tracer
      
           To disable the tracer:
      
             echo disable > /debugfs/tracing/current_tracer
      
        tracing_enabled
           echoing "1" into this file starts the ftrace function tracing
            (if sysctl kernel.ftrace_enabled=1)
           echoing "0" turns it off.
      
        latency_trace
            This file is readonly and holds the result of the trace.
      
        trace
            This file outputs a easier to read version of the trace.
      
        iter_ctrl
            Controls the way the output of traces look.
            So far there's two controls:
              echoing in "symonly" will only show the kallsyms variables
                  without the addresses (if kallsyms was configured)
              echoing in "verbose" will change the output to show
                  a lot more data, but not very easy to understand by
                  humans.
              echoing in "nosymonly" turns off symonly.
              echoing in "noverbose" turns off verbose.
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@ghostprotocols.net>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      bc0c38d1
    • Arnaldo Carvalho de Melo's avatar
      ftrace: add basic support for gcc profiler instrumentation · 16444a8a
      Arnaldo Carvalho de Melo authored
      If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
      set to a non-zero value the ftrace routine will be called everytime
      we enter a kernel function that is not marked with the "notrace"
      attribute.
      
      The ftrace routine will then call a registered function if a function
      happens to be registered.
      
      [ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
        so don't blame Arnaldo for all of this ;-) ]
      
      Update:
        It is now possible to register more than one ftrace function.
        If only one ftrace function is registered, that will be the
        function that ftrace calls directly. If more than one function
        is registered, then ftrace will call a function that will loop
        through the functions to call.
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@ghostprotocols.net>
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      16444a8a
    • Arnaldo Carvalho de Melo's avatar
      ftrace: annotate core code that should not be traced · 6e766410
      Arnaldo Carvalho de Melo authored
      Mark with "notrace" functions in core code that should not be
      traced.  The "notrace" attribute will prevent gcc from adding
      a call to ftrace on the annotated funtions.
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@ghostprotocols.net>
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      6e766410
    • Steven Rostedt's avatar
      x86: add notrace annotations to vsyscall. · 23adec55
      Steven Rostedt authored
      Add the notrace annotations to the vsyscall functions - there we are
      not in kernel context yet, so the tracer function cannot (and must not)
      be called.
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      23adec55
    • Ingo Molnar's avatar
      tracing: add notrace to linkage.h · ffdc1a09
      Ingo Molnar authored
      notrace signals that a function should not be traced. Most of the
      time this is used by tracers to annotate code that cannot be
      traced - it's in a volatile state (such as in user vdso context
      or NMI context) or it's in the tracer internals.
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      ffdc1a09
    • Steven Rostedt's avatar
      ftrace: add preempt_enable/disable notrace macros · 50282528
      Steven Rostedt authored
      The tracer may need to call preempt_enable and disable functions
      for time keeping and such. The trace gets ugly when we see these
      functions show up for all traces. To make the output cleaner
      this patch adds preempt_enable_notrace and preempt_disable_notrace
      to be used by tracer (and debugging) functions.
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      50282528
    • Steven Rostedt's avatar
      ftrace: make the task state char-string visible to all · 7c731e0a
      Steven Rostedt authored
      The tracer wants to be able to convert the state number
      into a user visible character. This patch pulls that conversion
      string out the scheduler into the header. This way if it were to
      ever change, other parts of the kernel will know.
      Signed-off-by: default avatarSteven Rostedt <srostedt@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      7c731e0a
    • Ingo Molnar's avatar
      sched: add latency tracer callbacks to the scheduler · bd3bff9e
      Ingo Molnar authored
      add 3 lightweight callbacks to the tracer backend.
      
      zero impact if tracing is turned off.
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      bd3bff9e
  2. 22 May, 2008 14 commits
  3. 21 May, 2008 13 commits