Merge tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omap variants

This series of changes configures dra7 pcie x2 lane mode, configures
am43xx-epos-evm regulators and keypad wakeup source, and uses standard
reset-gpios instead of gpio-reset for n810.

We also need to split dra7 dtsi files for properly supporting dra76x
and am576 as some of the devices are different such as usb and pruss.

* tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra7: Separate AM57 dtsi files
  dt-binding: arm: omap: Add information for AM5748
  ARM: dts: omap2420-n810: Use new CODEC reset pin name
  ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source
  ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory
  ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on
  ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoCs DT updates for 5.2

* Hi3660 SoC and related boards:
  - Added DMA support for the uart nodes
  - Added the asp DMA controller node
  - Replaced dma-min-chan with dma-channel-mask to follow the binding

* Hi3670 SoC and related boards:
  - Reused Hi3660 reset to support Hi3670, updated the binding
    document and added dts node
  - Reused Hi3660 MMC controller to support Hi3670, updated the
    binding document and added related nodes to support SD and WiFi
    for the SoC and hikey970 board
  - Added UFS controller node

* tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: hi3670: Add UFS controller support
  arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask
  arm64: dts: hi3660: Add hisi asp dma device
  arm64: dts: hi3660: Add dma to uart nodes
  arm64: dts: hisilicon: hikey970: Add SD and WiFi support
  arm64: dts: hisilicon: hi3670: Add MMC controller support
  dt-bindings: mmc: Add HI3670 MMC controller binding
  arm64: dts: hisilicon: hi3670: Add reset controller support
  dt-bindings: reset: Add HI3670 reset controller binding
Signed-off-by: Olof Johansson <olof@lixom.net>

arm64: dts: zynqmp: DT changes for v5.2

- Align xlnx-zynqmp-clk.h file name and separate
  binding for clock driver
- Add TI quirks to zynqmp boards

* tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: dt: Add TI PHY quirk
  dt-bindings: xilinx: Separate clock binding from firmware doc
  include: dt-binding: clock: Rename zynqmp header file
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.2

1. Use proper clock rates for GSCALER module on TM2 boards.
2. Add clocks for local paths on DECON and GSCALER modules of
   Exynos5433.
3. Add Slim SecuritySubSystem to Exynos5433.

* tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Add SlimSSS to Exynos5433
  arm64: dts: exynos: add DSD/GSD clocks to DECONs and GSCALERs of Exynos5433
  arm64: dts: exynos: configure GSCALER related clocks on TM2
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.2

1. Use proper ADC on Exynos4412.
2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps,
   unused regulators, ADC and UHS-I SD card support.  Beside that adjust
   regulators to proper level and add always-on when needed.
3. Extend the Exynos5260: high speed I2C and proper external interrupts.
   Also fix shared external interrupt line and use better PLL for MMC
   clocks.
4. Fix audio recording (broken around v5.1) and microphone recording
   (since v4.14) on Exynos5422 Odroid XU3 boards.
5. Minor cleanups (stdout-path and bootargs).

* tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Remove console argument from bootargs
  ARM: dts: exynos: Use stdout-path property instead of console in bootargs
  ARM: dts: exynos: Fix spelling mistake of EXYNOS5420
  ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3
  ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa
  ARM: dts: exynos: Extend the eMMC node on Arndale Octa
  ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa
  ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa
  ARM: dts: exynos: Fix audio routing on Odroid XU3
  ARM: dts: exynos: Enable ADC on Arndale Octa
  ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260
  ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
  ARM: dts: exynos: Add high speed I2C ports for Exynos5260
  ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260
  ARM: dts: exynos: Order nodes alphabetically in Arndale Octa
  ARM: dts: exynos: Add CPU cooling on Arndale Octa
  ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board
  ARM: dts: exynos: Use stdout path property on Arndale Octa board
  ARM: dts: exynos: Document regulator used by ADC on Odroid U3
  ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.2, round 1

Highlights:
----------

MPU part:
 - Add initial support of stm32mp157a-dk1 board:
   This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
   and 512MB of DDR3. Several connections are available on this boards:
   4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

 - Add initial support of stm32mp157c-dk2 board:
   This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC
   with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections
   than stm32mp157a-dk1 board are available. Display panel (otm8009a) and
   Murata wifi/BT combo is added.

 - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add sysconfig clock support on stm32mp157c.
 - Add romem and temperature calibration support on stm32mp157c.
 - Add SPDIFRX support on stm32mp157c.
 - Enable CEC on stm32mp157a-dk1/dk2.

MCU part:
 - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco
   boards.
 - Add romem and temperature calibration support on stm32f429
   (and so stm32f469).
 - Enable stm32f769 clock driver

* tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
  ARM: dts: stm32: enable cec on stm32mp157a-dk1 board
  ARM: dts: stm32: add cec pins muxing on stm32mp157
  ARM: dts: stm32: add ltdc pins muxing on stm32mp157
  ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157
  ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2
  ARM: dts: stm32: Enable STM32F769 clock driver
  ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board
  ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board
  ARM: dts: stm32: add spdfirx pins to stm32mp157c
  ARM: dts: stm32: add spdifrx support on stm32mp157c
  ARM: dts: stm32: Add romem and temperature calibration on stm32f429
  ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
  ARM: dts: stm32: Add clock on stm32mp157c syscfg
  ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1
  ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1
  ARM: dts: stm32: add IPCC mailbox support on STM32MP157c
  ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board
  ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board
  ARM: dts: stm32: add sdmmc1 support on stm32mp157c
  ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.2

 - RTC and GFX DRM driver went upstream this cycle

 - Miscellaneous board updates for Facebook and IBM BMCs

* tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Add RTC node
  ARM: dts: aspeed: witherspoon: Update BMC partitioning
  ARM: dts: aspeed: cmm: enable iio-hwmon-adc
  ARM: dts: aspeed: tiogapass: Enable VUART
  ARM: dts: aspeed-g5: Add video engine
  ARM: dts: aspeed: Enable the GFX IP
  ARM: dts: aspeed-g5: Add resets and clocks to GFX node
  ARM: dts: aspeed: witherspoon: Enable vhub
  ARM: dts: aspeed: palmetto: Fix flash_memory region
  ARM: dts: aspeed: ast2500: Update flash layout
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM64 Based SoC DT Updates for v5.2

* R-Car Gen3 SoC based Salvator-X and Salvator-XS boards
  - Add GPIO keys support
  - Sort rwdt node alphabetically

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
  - Use extended audio DMAC register

* R-Car M3-W (r8a7796) SoC
  - Remove unneeded sound #address/size-cells

* R-Car M3-N (r8a77965) SoC
  - Add SSIU support for audio

* R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs
  - Remove invalid compatible value for CSI40

* R-Car E3 (r8a77990) SoC
  - Cprrect SPDX license identifier style

* R-Car E3 (r8a77990) based Ebisu board
  - Add BD9571 PMIC with DDR0 backup power config
  - Correct adv7482 hexadecimal register address
  - Add GPIO expander

* R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards
  - Update bootargs to bring them into line with other R-Car Gen3 boards
  - Enable LVDS1 encoder

* R-Car D3 (r8a77995) based Draak board
  - Correct EthernetAVB phy mode
  - Enable CAN0 and CAN1

* RZ/G2E (r8a774c0) SoC
  - Add CANFD support
  - Correct CPU node style

* RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs
  - Add clkp2 clock to CAN nodes

* RZ/G2E (r8a774c0) based EK874 board
  - Add LED, CAN and RTC support

* tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
  arm64: dts: renesas: salvator-common: Add GPIO keys support
  arm64: dts: renesas: use extended audio dmac register
  arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii
  arm64: dts: renesas: salvator-common: Sort node label
  arm64: dts: renesas: Update Ebisu and Draak bootargs
  arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes
  arm64: dts: renesas: r8a774c0: Add CANFD support
  arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes
  arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config
  arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC
  arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40
  arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40
  arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1
  arm64: dts: renesas: r8a774c0-cat874: Add RWDT support
  arm64: dts: renesas: ebisu: Enable VIN5
  arm64: dts: renesas: r8a774c0-cat874: Add LEDs support
  arm64: dts: renesas: r8a774c0-cat874: add RTC support
  arm64: dts: renesas: cat875: Add CAN support
  arm64: dts: renesas: r8a774c0: Fix cpu nodes style
  arm64: dts: renesas: r8a77965: add SSIU support for sound
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Core new soc features are hdmi-cec for rk3328, scheduler capacity-values
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and
NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also
directly got some additional features added after the boards itself.

The Rock960 family (rock960+ficus) got their power-tree cleaned to match
the schematics and also got hdmi-audio and their gpu enabled.

Mali support also got enabled on the RockPi4 and finally both
rk3328-rock64 and rk3328-roc-cc got some additional features.

* tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
  arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma
  arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy.
  arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller.
  arm64: dts: rockchip: Add nanopi4 ethernet phy
  arm64: dts: rockchip: Add PWM fan for NanoPC-T4
  arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi
  arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911)
  arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi
  arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus
  arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960
  arm64: dts: rockchip: Add Nanopi NEO4 initial support
  arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64
  arm64: dts: rockchip: Add support for the Orange Pi RK3399 board.
  arm64: dts: rockchip: enable mali on rock960 boards
  arm64: dts: rockchip: enable mali on Rock Pi 4
  arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes
  arm64: dts: rockchip: give some life to the rk3328-roc-cc leds
  arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328
  arm64: dts: rockchip: add ir-receiver node on rk3328-rock64
  arm64: dts: rockchip: add leds node on rk3328-rock64
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Quite a bit of love for the rk3288-veyron chromeos devices and a number
of cleanups for rk3288 from that area, hdmi support for the old rk3066
a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board.

* tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808
  ARM: dts: rockchip: add rk3066 hdmi nodes
  ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty
  dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty
  ARM: dts: rockchip: Add vdd_logic to rk3288-veyron
  ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry
  ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
  dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
  ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288
  ARM: dts: rockchip: Enable WiFi on rk3288-tinker
  ARM: dts: rockchip: add grf reference in rk3288 tsadc node
  ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s
  ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.2
 - add GPIO line names for odroid-c1 boards
 - support internal clock measure driver

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: odroidc1: add the GPIO line names
  ARM: dts: meson8b: add the internal clock measurer
  ARM: dts: meson8: add the internal clock measurer
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.2

Highlights
- new board: SEI Robotics 510, based on S905X2 SoC (G12A)
- enable more periphearls for S905X2 based boards

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson-g12a: Add CMA reserved memory
  arm64: dts: meson-g12a-x96-max: Enable BT Module
  arm64: dts: meson-g12a-x96-max: add regulators
  arm64: dts: meson-g12a-sei510: add regulators
  arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl
  arm64: dts: meson-g12a-sei510: add uart_AO pinctrl
  arm64: dts: meson-g12a-u200: add uart_AO pinctrl
  arm64: dts: meson: g12a: Add UART A, B & C nodes and pins
  arm64: dts: meson: g12a: add reset controller
  arm64: dts: meson: g12a: add uart_ao_a pinctrl
  arm64: dts: meson: g12a: add pinctrl support controllers
  arm64: dts: meson: g12a: Add AO Clock + Reset Controller support
  arm64: dts: meson-gxm-nexbox-a1: Enable USB
  arm64: dts: meson: g12a: add efuse
  arm64: dts: meson: g12a: add secure monitor
  arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED
  arm64: dts: meson-g12a: Add AO Secure node
  arm64: dts: Add SEI Robotics SEI510 Board
  vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd
Signed-off-by: Olof Johansson <olof@lixom.net>

Add UFS controller support for HiSilicon HI3670 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

AM5 and DRA7 SoC families have different set of modules
in them so the SoC sepecific dtsi files need to be separated.

e.g. Some of the major differences between AM576 and DRA76

		DRA76x	AM576x

USB3		x
USB4		x
ATL		x
VCP		x
MLB		x
ISS		x
PRU-ICSS1		x
PRU-ICSS2		x

This patch only deals with disabling USB3, USB4 and ATL for
AM57 variants.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add DT binding details for AM5748 SoC and AM5748 IDK.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable CEC (Consumer Electronics Control) device.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add a new pin muxing for cec.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add ltdc pins muxing on stm32mp157.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add I2C sleep pins muxing for low power mode.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds a new property (power-supply) to panel otm8009a (orisetech)
on stm32mp157c-dk2  & regulator v3v3.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch enables clocks for STM32F769 boards.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds stpmic1 support on stm32mp157a dk1 board.
The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
The DMAs are disabled because the PMIC generates a very few traffic and
DMA channels may lack for other usage.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds stpmic1 support on stm32mp157c ed1 board.
The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
The DMAs are disabled because the PMIC generates a very few traffic and
DMA channels may lack for other usage.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds spdifrx support on stm32mp157c eval board.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds support of STM32 SPDIFRX on
stm32mp157c.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells. Non-volatile calibration data is made available by
stm32mp157c bootrom in bsec_dataX registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

STM32 syscfg needs a clock to access registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Enable STM32 IPCC mailbox driver for STM32MP157a-dk1 board.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Enable STM32 IPCC mailbox driver for STM32MP157c-ed1 board.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add configuration on DT for IPCC mailbox driver.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds sdmmc1 support on stm32mp157a dk1 board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds sdmmc1 support on stm32mp157c ed1 board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds support of sdmmc1 on stm32mp157c.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds sdmmc1 support on stm32h743i disco board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds sdmmc1 support on stm32h743i eval board.
This board has an external driver to control signal direction polarity.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds support of sdmmc1 on stm32h743.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Remove the "console=ttySAC..." argument from DTSes having a proper
stdout-path property.  To make the code functionally equivalent, add the
serial port baud rate and parity.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Replacing bootargs with stdout-path property in chosen node allows using
early console by adding just 'earlycon' parameter to the kernel command
line.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>