- 03 Jan, 2014 2 commits
-
-
Fan Du authored
so /proc/net/xfrm_stat could give user clue about what's wrong in this process. Signed-off-by:
Fan Du <fan.du@windriver.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Fan Du authored
xfrm_state lock protects its state, i.e., VALID/DEAD and statistics, not the transforming procedure, as both mode/type output functions are reentrant. Another issue is state lock can be used in BH context when state timer alarmed, after transformation in pktgen, update state statistics acquiring state lock should disabled BH context for a moment. Otherwise LOCKDEP critisize this: [ 62.354339] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 62.655444] [ 62.655448] ================================= [ 62.655451] [ INFO: inconsistent lock state ] [ 62.655455] 3.13.0-rc2+ #70 Not tainted [ 62.655457] --------------------------------- [ 62.655459] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 62.655463] kpktgend_0/2764 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 62.655466] (&(&x->lock)->rlock){+.?...}, at: [<ffffffffa00886f6>] pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655479] {IN-SOFTIRQ-W} state was registered at: [ 62.655484] [<ffffffff8109a61d>] __lock_acquire+0x62d/0x1d70 [ 62.655492] [<ffffffff8109c3c7>] lock_acquire+0x97/0x130 [ 62.655498] [<ffffffff81774af6>] _raw_spin_lock+0x36/0x70 [ 62.655505] [<ffffffff816dc3a3>] xfrm_timer_handler+0x43/0x290 [ 62.655511] [<ffffffff81059437>] __tasklet_hrtimer_trampoline+0x17/0x40 [ 62.655519] [<ffffffff8105a1b7>] tasklet_hi_action+0xd7/0xf0 [ 62.655523] [<ffffffff81059ac6>] __do_softirq+0xe6/0x2d0 [ 62.655526] [<ffffffff8105a026>] irq_exit+0x96/0xc0 [ 62.655530] [<ffffffff8177fd0a>] smp_apic_timer_interrupt+0x4a/0x60 [ 62.655537] [<ffffffff8177e96f>] apic_timer_interrupt+0x6f/0x80 [ 62.655541] [<ffffffff8100b7c6>] arch_cpu_idle+0x26/0x30 [ 62.655547] [<ffffffff810ace28>] cpu_startup_entry+0x88/0x2b0 [ 62.655552] [<ffffffff81761c3c>] rest_init+0xbc/0xd0 [ 62.655557] [<ffffffff81ea5e5e>] start_kernel+0x3c4/0x3d1 [ 62.655583] [<ffffffff81ea55a8>] x86_64_start_reservations+0x2a/0x2c [ 62.655588] [<ffffffff81ea569f>] x86_64_start_kernel+0xf5/0xfc [ 62.655592] irq event stamp: 77 [ 62.655594] hardirqs last enabled at (77): [<ffffffff810ab7f2>] vprintk_emit+0x1b2/0x520 [ 62.655597] hardirqs last disabled at (76): [<ffffffff810ab684>] vprintk_emit+0x44/0x520 [ 62.655601] softirqs last enabled at (22): [<ffffffff81059b57>] __do_softirq+0x177/0x2d0 [ 62.655605] softirqs last disabled at (15): [<ffffffff8105a026>] irq_exit+0x96/0xc0 [ 62.655609] [ 62.655609] other info that might help us debug this: [ 62.655613] Possible unsafe locking scenario: [ 62.655613] [ 62.655616] CPU0 [ 62.655617] ---- [ 62.655618] lock(&(&x->lock)->rlock); [ 62.655622] <Interrupt> [ 62.655623] lock(&(&x->lock)->rlock); [ 62.655626] [ 62.655626] *** DEADLOCK *** [ 62.655626] [ 62.655629] no locks held by kpktgend_0/2764. [ 62.655631] [ 62.655631] stack backtrace: [ 62.655636] CPU: 0 PID: 2764 Comm: kpktgend_0 Not tainted 3.13.0-rc2+ #70 [ 62.655638] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 62.655642] ffffffff8216b7b0 ffff88001be43ab8 ffffffff8176af37 0000000000000007 [ 62.655652] ffff88001c8d4fc0 ffff88001be43b18 ffffffff81766d78 0000000000000000 [ 62.655663] ffff880000000001 ffff880000000001 ffffffff8101025f ffff88001be43b18 [ 62.655671] Call Trace: [ 62.655680] [<ffffffff8176af37>] dump_stack+0x46/0x58 [ 62.655685] [<ffffffff81766d78>] print_usage_bug+0x1f1/0x202 [ 62.655691] [<ffffffff8101025f>] ? save_stack_trace+0x2f/0x50 [ 62.655696] [<ffffffff81099f8c>] mark_lock+0x28c/0x2f0 [ 62.655700] [<ffffffff810994b0>] ? check_usage_forwards+0x150/0x150 [ 62.655704] [<ffffffff8109a67a>] __lock_acquire+0x68a/0x1d70 [ 62.655712] [<ffffffff81115b09>] ? irq_work_queue+0x69/0xb0 [ 62.655717] [<ffffffff810ab7f2>] ? vprintk_emit+0x1b2/0x520 [ 62.655722] [<ffffffff8109cec5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 62.655730] [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655734] [<ffffffff8109c3c7>] lock_acquire+0x97/0x130 [ 62.655741] [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655745] [<ffffffff81774af6>] _raw_spin_lock+0x36/0x70 [ 62.655752] [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655758] [<ffffffffa00886f6>] pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655766] [<ffffffffa0087a79>] ? pktgen_thread_worker+0xb19/0x1860 [pktgen] [ 62.655771] [<ffffffff8109cf9d>] ? trace_hardirqs_on+0xd/0x10 [ 62.655777] [<ffffffff81775410>] ? _raw_spin_unlock_irq+0x30/0x40 [ 62.655785] [<ffffffff8151faa0>] ? e1000_clean+0x9d0/0x9d0 [ 62.655791] [<ffffffff81094310>] ? __init_waitqueue_head+0x60/0x60 [ 62.655795] [<ffffffff81094310>] ? __init_waitqueue_head+0x60/0x60 [ 62.655800] [<ffffffffa0086f60>] ? mod_cur_headers+0x7f0/0x7f0 [pktgen] [ 62.655806] [<ffffffff81078f84>] kthread+0xe4/0x100 [ 62.655813] [<ffffffff81078ea0>] ? flush_kthread_worker+0x170/0x170 [ 62.655819] [<ffffffff8177dc6c>] ret_from_fork+0x7c/0xb0 [ 62.655824] [<ffffffff81078ea0>] ? flush_kthread_worker+0x170/0x170 Signed-off-by:
-
- 02 Jan, 2014 5 commits
-
-
Weilong Chen authored
Signed-off-by:
Weilong Chen <chenweilong@huawei.com> Signed-off-by:
-
Weilong Chen authored
Fix that "else should follow close brace '}'". Signed-off-by:
-
Weilong Chen authored
Fix checkpatch error "space prohibited xxx". Signed-off-by:
-
Weilong Chen authored
This patch clean up some checkpatch errors like this: ERROR: "foo * bar" should be "foo *bar" ERROR: "(foo*)" should be "(foo *)" Signed-off-by:
-
Weilong Chen authored
This patch cleanup some space errors. Signed-off-by:
-
- 20 Dec, 2013 22 commits
-
-
David S. Miller authored
Tan Xiaojun says: ==================== bridge: cleanup and fix checkpatch errors Clean up and fix some checkpatch errors in bridge driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net> Acked-by:
Stephen Hemminger <stephen@networkplumber.org>
-
tanxiaojun authored
That open brace { should be on the previous line. Signed-off-by:Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by:
-
tanxiaojun authored
"foo * bar" should be "foo *bar". Signed-off-by:
-
tanxiaojun authored
Spaces required before the open parenthesis '(', before the open brace '{', after that ',' and around that '?/:'. Signed-off-by: -
tanxiaojun authored
Return is not a function, parentheses are not required. Signed-off-by:
-
tanxiaojun authored
Because err is always negative, remove unnecessary condition judgment. Signed-off-by:
-
Tom Herbert authored
Save pkt_hash_types in tpa structure. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== Add PHY IRQ support to the 'sh_eth' driver This patchset adds support for passing PHY's IRQ to the 'sh_eth' driver from the platform code and removes now useless code that hinders the PHY IRQ handing by philib. ==================== Signed-off-by: -
Sergei Shtylyov authored
There's no need anymore to call phy_init_hw() to reset/resume the PHY from the driver, as the call chain in phylib already has reached it, and so reset/resumed the PHY (even resuming it twice). This duplicate reset is not only needless, it e.g. clears the PHY's interrupt enables just setup by phylib and so prevents the expected IRQs from the PHY. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Allow the platform code to pass PHY's IRQ to the driver. Print this IRQ along with the other PHY datails in sh_eth_phy_init(). Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== net/mlx4: Mellanox driver update 08-12-2013 This patchset contains: 1. Support in ndo_get_phys_port_id added by Hadar. 2. Change the driver to use by default CQE/EQE size of 64 bytes done by Eyal. This doubles the packet-rate of the NIC. 3. Configure the XPS queue mapping on driver load - added by Ido. 4. Fixes for some small bugs done by Jenny and Matan Patchset was applied and tested against commit: "23721754 lib: hash: follow-up fixups for arch hash" Changes from V1: - Removed Patch 10 "net/mlx4_en: Fix Supported/Advertised link mode reported by ethtool". This patch is needed to be rewritten from scratch and I wouldn't like it to block the rest of the patches in this set. Also, fix to Kconfig suggested by Ben will be sent in next patchset. Changes from V0: - Found some issues in "Reuse memory in RX flow" patch from V0. Removing this patch from the patchset till analyzed and fixed. - Fix some coding style issues in patch 6 "Configure the XPS queue mapping on driver load" - Changed patch 9 "Add NAPI support for transmit side" to use NAPI_POLL_WEIGHT instead of MLX4_EN_TX_BUDGET ==================== Signed-off-by:
-
Matan Barak authored
Need to validate port number at mlx4_promisc_qp() before use. Since port number is extracted from gid, as a cooked or corrupted gid could lead to a crash. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
Add NAPI for TX side, implement its support and provide NAPI callback. Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
MLX4_DEV_EVENT_SLAVE_INIT and MLX4_DEV_EVENT_SLAVE_SHUTDOWN events used by Hypervisor to inform the PPF IB driver that IB para-virtualization must be initialized/destroyed for a slave. If this event is catched by ETH VF annoying but harmless error message is printed into dmesg. Remove dmesg prints for these events. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by:
-
Eyal Perry authored
To achieve out of the box performance default is to use 64 byte CQE/EQE. In tests that we conduct in our labs, we achieved a performance improvement of twice the message rate. For older VF/libmlx4 support, enable_64b_cqe_eqe must be set to 0 (disabled). Signed-off-by:
Eyal Perry <eyalpe@mellanox.com> Signed-off-by:
-
Ido Shamay authored
Only TX rings of User Piority 0 are mapped. TX rings of other UP's are using UP 0 mapping. XPS is not in use when num_tc is set. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Hadar Hen Zion authored
Use the port GUID read from the firmware to identify the physical port. This port identifier is available via ndo_get_phys_port_id for both PF and VF net-devices. Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
-
Hadar Hen Zion authored
Add the infrastructure needed to support ndo_get_phys_port_id which allows users to identify to which physical port a net-device is connected to by reading a unique port id. This will work for VFs and PFs. The driver uses a new device capability - phys_port_id, The PF driver reads the port phys_port_id from Firmware and stores it. The VF driver reads the port phys_port_id from the PF using QUERY_FUNC_CAP command. Signed-off-by:
-
Hadar Hen Zion authored
Set nic_info field in QUERY_FUNC_CAP, which designates supplementary NIC information is provided by the hypervisor. When set, the following fields are valid: nic_num_rings, nic_indirection_tbl_sz, cur_mac and phys_port_id. Signed-off-by:
-
Hadar Hen Zion authored
Use correct names for QUERY_FUNC_CAP fields: flags0 and flags1. Signed-off-by:
-
Hadar Hen Zion authored
All mailboxes are already zeroed by commit: 571b8b92 net/mlx4_core: Initialize all mailbox buffers to zero before use Remove explicit zero set for force mac and force vlan fields in mlx4_QUERY_FUNC_CAP_wrapper Signed-off-by:
-
Eric Dumazet authored
Given we allocate memory for each cpu, we can do this using NUMA affinities, instead of using NUMA policies of the process changing flow_limit_cpu_bitmap value. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
- 19 Dec, 2013 11 commits
-
-
Rashika Kheria authored
This patch marks the function il_clear_traffic_stats() in debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/debug.c: drivers/net/wireless/iwlegacy/debug.c:35:1: warning: no previous prototype for ‘il_clear_traffic_stats’ [-Wmissing-prototypes] Signed-off-by:
Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Rashika Kheria authored
This patch marks the function il4965_ucode_rx_stats_read(), il4965_ucode_tx_stats_read() and il4965_ucode_general_stats_read() in 4965-debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/4965-debug.c: drivers/net/wireless/iwlegacy/4965-debug.c:59:1: warning: no previous prototype for ‘il4965_ucode_rx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/4965-debug.c:471:1: warning: no previous prototype for ‘il4965_ucode_tx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/4965-debug.c:637:1: warning: no previous prototype for ‘il4965_ucode_general_stats_read’ [-Wmissing-prototypes] Signed-off-by:
-
Rashika Kheria authored
This patch marks the function il3945_ucode_rx_stats_read(), il3945_ucode_tx_stats_read() and il3945_ucode_general_stats_read() in 3945-debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/3945-debug.c: drivers/net/wireless/iwlegacy/3945-debug.c:52:1: warning: no previous prototype for ‘il3945_ucode_rx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/3945-debug.c:317:1: warning: no previous prototype for ‘il3945_ucode_tx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/3945-debug.c:407:1: warning: no previous prototype for ‘il3945_ucode_general_stats_read’ [-Wmissing-prototypes] Signed-off-by:
-
Rashika Kheria authored
Create a new header file include/net/Space.h which contains prototype declaration of sbni_probe(). Include the new header file in drivers/net/Space.c and drivers/net/wan/sbni.c because they use this function. This eliminates the following warning in wan/sbni.c: drivers/net/wan/sbni.c:224:12: warning: no previous prototype for ‘sbni_probe’ [-Wmissing-prototypes] Signed-off-by:
-
Rashika Kheria authored
This patch marks the function stmmac_pltfr_freeze() and stmmac_pltfr_restore() in stmmac_platform.c as static because they are not used outside this file. Thus, it also removes the following warnings in ethernet/stmicro/stmmac/stmmac_platform.c: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:222:5: warning: no previous prototype for ‘stmmac_pltfr_freeze’ [-Wmissing-prototypes] drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:236:5: warning: no previous prototype for ‘stmmac_pltfr_restore’ [-Wmissing-prototypes] Signed-off-by:
-
Rashika Kheria authored
This patch marks the function qlcnic_83xx_clear_legacy_intr_mask(), qlcnic_83xx_set_legacy_intr_mask() and qlcnic_83xx_enable_legacy_msix_mbx_intr() in qlcnic_83xx_hw.c as static because they are not used outside this file. Thus, it also removes the following warnings in ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c: drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:318:13: warning: no previous prototype for ‘qlcnic_83xx_clear_legacy_intr_mask’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:323:13: warning: no previous prototype for ‘qlcnic_83xx_set_legacy_intr_mask’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:343:13: warning: no previous prototype for ‘qlcnic_83xx_enable_legacy_msix_mbx_intr’ [-Wmissing-prototypes] Signed-off-by:
-
Rashika Kheria authored
This patch marks the function qlcnic_enable_tx_intr(), qlcnic_83xx_enable_tx_intr() and qlcnic_83xx_disable_tx_intr() in qlcnic_io.c as static because they are not used outside this file. Thus, it also removes the following warnings in ethernet/qlogic/qlcnic/qlcnic_io.c: drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:130:13: warning: no previous prototype for ‘qlcnic_enable_tx_intr’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:147:13: warning: no previous prototype for ‘qlcnic_83xx_enable_tx_intr’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:153:13: warning: no previous prototype for ‘qlcnic_83xx_disable_tx_intr’ [-Wmissing-prototypes] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2013-12-19 1) Use the user supplied policy index instead of a generated one if present. From Fan Du. 2) Make xfrm migration namespace aware. From Fan Du. 3) Make the xfrm state and policy locks namespace aware. From Fan Du. 4) Remove ancient sleeping when the SA is in acquire state, we now queue packets to the policy instead. This replaces the sleeping code. 5) Remove FLOWI_FLAG_CAN_SLEEP. This was used to notify xfrm about the posibility to sleep. The sleeping code is gone, so remove it. 6) Check user specified spi for IPComp. Thr spi for IPcomp is only 16 bit wide, so check for a valid value. From Fan Du. 7) Export verify_userspi_info to check for valid user supplied spi ranges with pfkey and netlink. From Fan Du. 8) RFC3173 states that if the total size of a compressed payload and the IPComp header is not smaller than the size of the original payload, the IP datagram must be sent in the original non-compressed form. These packets are dropped by the inbound policy check because they are not transformed. Document the need to set 'level use' for IPcomp to receive such packets anyway. From Fan Du. Please pull or let me know if there are problems. ==================== Signed-off-by: -
David S. Miller authored
Scott Feldman says: ==================== bonding: add even more netlink attributes The following series implements five more bonding netlink attributes: num_grat_arp|num_unsol_na all_slaves_active min_links lp_interval packets_per_slave Tested with modified iproute2 to verify attributes can be set at bond creation time or set later. Verified sysfs interface to attributes continues to work. I have one more set after this one for all of the 802.3ad attributes. Whew. ==================== Signed-off-by: -
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_PACKETS_PER_SLAVE to allow get/set of bonding parameter packets_per_slave via netlink. Signed-off-by:
Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_LP_INTERVAL to allow get/set of bonding parameter lp_interval via netlink. Signed-off-by:
-
