Allow write zeroes operations (REQ_OP_WRITE_ZEROES) on the block
device, if the device supports an optional command bit set for write
zeroes. Add support to setup write zeroes command. Set maximum possible
write zeroes sectors in one write zeroes command according to
nvme write zeroes command definition.

This patch was posted as a part of block-write-zeroes support
implementation (https://patchwork.kernel.org/patch/9454859/),
but did not make into mainline kernel as it got reverted due to
failure on the Linus's machine.

In this patch in order to be more cautious, we use NVMe controller's
maximum hardware sector size which is calculated based on the
controller's MDTS (Maximum Data Transfer Size) field to calculate
the maximum sectors for the write zeroes request.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
[folded a fix from Keith Busch to properly respect
 NVME_QUIRK_DEALLOCATE_ZEROES]
Signed-off-by: Christoph Hellwig <hch@lst.de>

Currently, we check whether the hctx type is supported every time
in hot path. Actually, this is not necessary, we could save the
default hctx into ctx->hctxs if the type is not supported when
map swqueues and use it directly with ctx->hctxs[type].

We also needn't check whether the poll is enabled or not, because
the caller would clear the REQ_HIPRI in that case.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently, the queue mapping result is saved in a two-dimensional
array. In the hot path, to get a hctx, we need do following:

  q->queue_hw_ctx[q->tag_set->map[type].mq_map[cpu]]

This isn't very efficient. We could save the queue mapping result into
ctx directly with different hctx type, like,

  ctx->hctxs[type]
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When a new I/O request arrives for a bfq_queue, say Q, bfq checks
whether that request is close to
(a) the head request of some other queue waiting to be served, or
(b) the last request dispatched for the in-service queue (in case Q
itself is not the in-service queue)

If a queue, say Q2, is found for which the above condition holds, then
bfq merges Q and Q2, to hopefully get a more sequential I/O in the
resulting merged queue, and thus a possibly higher throughput.

Case (b) is checked by comparing the new request for Q with the last
request dispatched, assuming that the latter necessarily belonged to the
in-service queue. Unfortunately, this assumption is no longer always
correct, since commit d0edc247 ("block, bfq: inject other-queue I/O
into seeky idle queues on NCQ flash").

When the assumption does not hold, queues that must not be merged may be
merged, causing unexpected loss of control on per-queue service
guarantees.

This commit solves this problem by adding an extra field, which stores
the actual last request dispatched for the in-service queue, and by
using this new field to correctly check case (b).
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Writes tend to starve reads. bfq counters this problem by overcharging
writes with an inflated service w.r.t. the actual service (number of
sector written) they receive.

Yet his overcharging is useless, and actually causes unfairness in the
opposite direction, when bfq happens to be enforcing strong I/O control.
bfq does this enforcing when the scenario is asymmetric, i.e., when some
bfq_queue or group of bfq_queues is to be granted a different bandwidth
than some other bfq_queue or group of bfq_queues. So, in such a
scenario, this commit disables write overcharging.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The original commit is commit 1a1238a7 ("cfq-iosched: improve hw_tag
detection") and has the following commit message:

If active queue hasn't enough requests and idle window opens, cfq will
not dispatch sufficient requests to hardware. In such situation, current
code will zero hw_tag. But this is because cfq doesn't dispatch enough
requests instead of hardware queue doesn't work. Don't zero hw_tag in
such case.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bfq simple heuristic from cfq for detecting whether the drive performs
command queueing: check whether the average number of in-flight requests
is above a given threshold. Unfortunately this heuristic does fail to
detect queueing (on drives with queueing) if processes doing I/O are few
and issue I/O with a low depth.

To reduce false negatives, this commit lowers the threshold.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bfq maintains an ordered list, through a red-black tree, of unique
weights of active bfq_queues. This list is used to detect whether there
are active queues with differentiated weights. The weight of a queue is
removed from the list when both the following two conditions become
true:

(1) the bfq_queue is flagged as inactive
(2) the has no in-flight request any longer;

Unfortunately, in the rare cases where condition (2) becomes true before
condition (1), the removal fails, because the function to remove the
weight of the queue (bfq_weights_tree_remove) is rightly invoked in the
path that deactivates the bfq_queue, but mistakenly invoked *before* the
function that actually performs the deactivation (bfq_deactivate_bfqq).

This commits moves the invocation of bfq_weights_tree_remove for
condition (1) to after bfq_deactivate_bfqq. As a consequence of this
move, it is necessary to add a further reference to the queue when the
weight of a queue is added, because the queue might otherwise be freed
before bfq_weights_tree_remove is invoked. This commit adds this
reference and makes all related modifications.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In bfq_update_peak_rate, to check whether an I/O request rq is
sequential, only the seek distance of rq w.r.t. the last request
dispatched is controlled. This is not sufficient for non-rotational
storage, where the size of rq is at least as relevant. This commit adds
the missing control.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bfq detects the creation of multiple bfq_queues shortly after each
other, namely a burst of queue creations in the terminology used in the
code. If the burst is large, then no queue in the burst is granted
- either I/O-dispatch plugging when the queue remains temporarily idle
  while in service;
- or weight raising, because it causes even longer plugging.

In fact, such a plugging tends to lower throughput, while these bursts
are typically due to applications or services that spawn multiple
processes, to reach a common goal as soon as possible. Examples are a
"git grep" or the booting of a system.

Unfortunately, disabling plugging may cause a loss of service guarantees
in asymmetric scenarios, i.e., if queue weights are differentiated or if
more than one group is active.

This commit addresses this issue by no longer disabling I/O-dispatch
plugging for queues in large bursts.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If the in-service bfq_queue is sync and remains temporarily idle, then
I/O dispatching (from other queues) may be plugged. It may be dome for
two reasons: either to boost throughput, or to preserve the bandwidth
share of the in-service queue. In the first case, if the I/O of the
in-service queue, when it finally arrives, consists only of one small
I/O request, then it makes sense to plug even the I/O of the in-service
queue. In fact, serving such a small request immediately is likely to
lower throughput instead of boosting it, whereas waiting a little bit is
likely to let that request grow, thanks to request merging, and become
more profitable in terms of throughput (this is likely to happen exactly
because the I/O of the queue has been detected to boost throughput).

On the opposite end, if I/O dispatching is being plugged only to
preserve the bandwidth of the in-service queue, then it would be better
not to plug also the I/O of the in-service queue, because such a
plugging is likely to cause only loss of bandwidth for the queue.

Unfortunately, no distinction is made between the two cases, and the I/O
of the in-service queue is always plugged in case just a small I/O
request arrives. This commit draws this missing distinction and does not
perform harmful plugging.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is a preparatory commit for commits that need to check only one of
the two main reasons for idling. This change should also improve the
quality of the code a little bit, by splitting a function that contains
very long, non-trivial and little related comments.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In asymmetric scenarios, i.e., when some bfq_queue or bfq_group needs to
be guaranteed a different bandwidth than other bfq_queues or bfq_groups,
these service guaranteed can be provided only by plugging I/O dispatch,
completely or partially, when the queue in service remains temporarily
empty. A case where asymmetry is particularly strong is when some active
bfq_queues belong to a higher-priority class than some other active
bfq_queues. Unfortunately, this important case is not considered at all
in the code for detecting asymmetric scenarios. This commit adds the
missing logic.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Before commit 18e5a57d ("block, bfq: postpone rq preparation to
insert or merge"), the destination queue for a request was chosen by a
different hook than the one that then inserted the request. So, between
the execution of the two hooks, the bic of the process generating the
request could happen to be redirected to a different bfq_queue. As a
consequence, the destination bfq_queue stored in the request could be
wrong. Such an event does not need to ba handled any longer.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

With some unlucky sequences of events, the function bfq_updated_next_req
updates the current budget of a bfq_queue to a lower value than the
service received by the queue using such a budget. Unfortunately, if
this happens, then the return value of the function bfq_bfqq_budget_left
becomes inconsistent. This commit solves this problem by lower-bounding
the budget computed in bfq_updated_next_req to the service currently
charged to the queue.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

To boost throughput on devices with internal queueing and in scenarios
where device idling is not strictly needed, bfq immediately starts
serving a new bfq_queue if the in-service bfq_queue remains without
pending I/O, even if new I/O may arrive soon for the latter queue. Then,
if such I/O actually arrives soon, bfq preempts the new in-service
bfq_queue so as to give the previous queue a chance to go on being
served (in case the previous queue should actually be the one to be
served, according to its timestamps).

However, the in-service bfq_queue, say Q, may also be without further
budget when it remains also pending I/O. Since bfq changes budgets
dynamically to fit the needs of bfq_queues, this happens more often than
one may expect. If this happens, then there is no point in trying to go
on serving Q when new I/O arrives for it soon: Q would be expired
immediately after being selected for service. This would only cause
useless overhead. This commit avoids such a useless selection.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The speed at which a bfq_queue receives I/O is one of the parameters by
which bfq decides whether the queue is soft real-time (i.e., whether the
queue contains the I/O of a soft real-time application). In particular,
when a bfq_queue remains without outstanding I/O requests, bfq computes
the minimum time instant, named soft_rt_next_start, at which the next
request of the queue may arrive for the queue to be deemed as soft real
time.

Unfortunately this filtering may cause problems with a queue in
interactive weight raising. In fact, such a queue may be conveying the
I/O needed to load a soft real-time application. The latter will
actually exhibit a soft real-time I/O pattern after it finally starts
doing its job. But, if soft_rt_next_start is updated for an interactive
bfq_queue, and the queue has received a lot of service before remaining
with no outstanding request (likely to happen on a fast device), then
soft_rt_next_start is assigned such a high value that, for a very long
time, the queue is prevented from being possibly considered as soft real
time.

This commit removes the updating of soft_rt_next_start for bfq_queues in
interactive weight raising.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The mtip32xx driver uses managed resources for DMA coherent memory
and irqs, but then always pairs them with free calls anyway, making
the resource tracking rather pointless.  Given some DMA allocations
are transient anyway, the irq freeing seems to require ordering vs
other hardware access the best solution seems to be to stop using
the managed resource API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the swapped outb() parameters in the KASLR code

   - Fix the PKEY handling at fork which missed to preserve the pkey
     state for the child. Comes with a test case to validate that.

   - Fix the entry stack handling for XEN PV to respect that XEN PV
     systems enter the function already on the current thread stack and
     not on the trampoline.

   - Fix kexec load failure caused by using a stale value when the
     kexec_buf structure is reused for subsequent allocations.

   - Fix a bogus sizeof() in the memory encryption code

   - Enforce PCI dependency for the Intel Low Power Subsystem

   - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
  x86/entry/64/compat: Fix stack switching for XEN PV
  x86/kexec: Fix a kexec_file_load() failure
  x86/mm/mem_encrypt: Fix erroneous sizeof()
  x86/selftests/pkeys: Fork() to check for state being preserved
  x86/pkeys: Properly copy pkey state at fork()
  x86/kaslr: Fix incorrect i8254 outb() parameters
  x86/intel/lpss: Make PCI dependency explicit

Pull x86 timer fixes from Thomas Gleixner:
 "Two commits which were missed to be sent during the merge window.

   - The TSC calibration fix turns out to be more urgent as recent
     Skylake-X systems seem to have massive trouble with calibration
     disturbance. This should go back into stable for that reason and it
     the risk of breakage is rather low.

   - Drop an unused define"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hpet: Remove unused FSEC_PER_NSEC define
  x86/tsc: Make calibration refinement more robust

Pull timer fix from Thomas Glexiner:
 "A single regression fix to address the unintended breakage of posix
  cpu timers.

  This is caused by a new sanity check in the common code, which fails
  for posix cpu timers under certain conditions because the posix cpu
  timer code never updates the variable which is checked"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Unbreak timer rearming

Pull locking fixes from Thomas Gleixner:
 "A small series of fixes which all address possible missed wakeups:

   - Document and fix the wakeup ordering of wake_q

   - Add the missing barrier in rcuwait_wake_up(), which was documented
     in the comment but missing in the code

   - Fix the possible missed wakeups in the rwsem and futex code"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Fix (possible) missed wakeup
  futex: Fix (possible) missed wakeup
  sched/wake_q: Fix wakeup ordering for wake_q
  sched/wake_q: Document wake_q_add()
  sched/wait: Fix rcuwait_wake_up() ordering

Pull irq fixes from Thomas Gleixner:
 "A small set of fixes for the interrupt subsystem:

   - Fix a double increment in the irq descriptor allocator which
     resulted in a sanity check only being done for every second
     affinity mask

   - Add a missing device tree translation in the stm32-exti driver.
     Without that the interrupt association is completely wrong.

   - Initialize the mutex in the GIC-V3 MBI driver

   - Fix the alignment for aliasing devices in the GIC-V3-ITS driver so
     multi MSI allocations work correctly

   - Ensure that the initial affinity of a interrupt is not empty at
     startup time.

   - Drop bogus include in the madera irq chip driver

   - Fix KernelDoc regression"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
  genirq/irqdesc: Fix double increment in alloc_descs()
  genirq: Fix the kerneldoc comment for struct irq_affinity_desc
  irqchip/madera: Drop GPIO includes
  irqchip/gic-v3-mbi: Fix uninitialized mbi_lock
  irqchip/stm32-exti: Add domain translate function
  genirq: Make sure the initial affinity is not empty

Pull EDAC fix from Borislav Petkov:
 "Fix persistent register offsets of altera_edac, from Thor Thayer"

* tag 'edac_fix_for_5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, altera: Fix S10 persistent register offset

Pull block revert from Jens Axboe:
 "Silly error snuck into a patch from the last series, let's do a revert
  to avoid a potential use-after-free"

* tag 'for-linus-20190127' of git://git.kernel.dk/linux-block:
  Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"

Pull KVM fixes from Paolo Bonzini:
 "Quite a few fixes for x86: nested virtualization save/restore, AMD
  nested virtualization and virtual APIC, 32-bit fixes, an important fix
  to restore operation on older processors, and a bunch of hyper-v
  bugfixes. Several are marked stable.

  There are also fixes for GCC warnings and for a GCC/objtool interaction"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Mark expected switch fall-throughs
  KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
  KVM: selftests: check returned evmcs version range
  x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
  KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
  kvm: selftests: Fix region overlap check in kvm_util
  kvm: vmx: fix some -Wmissing-prototypes warnings
  KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
  svm: Fix AVIC incomplete IPI emulation
  svm: Add warning message for AVIC IPI invalid target
  KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
  KVM: x86: Fix PV IPIs for 32-bit KVM host
  x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
  x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
  kvm: x86/vmx: Use kzalloc for cached_vmcs12
  KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
  KVM: x86: Fix single-step debugging
  x86/kvm/hyper-v: don't announce GUEST IDLE MSR support

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a xen-swiotlb regression on arm64"

* tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mapping:
  arm64/xen: fix xen-swiotlb cache flushing

Pull libnvdimm fixes from Dan Williams:
 "A fix for namespace label support for non-Intel NVDIMMs that implement
  the ACPI standard label method.

  This has apparently never worked and could wait for v5.1. However it
  has enough visibility with hardware vendors [1] and distro bug
  trackers [2], and low enough risk that I decided it should go in for
  -rc4. The other fixups target the new, for v5.0, nvdimm security
  functionality. The larger init path fixup closes a memory leak and a
  potential userspace lockup due to missed notifications.

    [1] https://github.com/pmem/ndctl/issues/78
    [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785

  These have all soaked in -next for a week with no reported issues.

  Summary:

   - Fix support for NVDIMMs that implement the ACPI standard label
     methods.

   - Fix error handling for security overwrite (memory leak / userspace
     hang condition), and another one-line security cleanup"

* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  acpi/nfit: Fix command-supported detection
  acpi/nfit: Block function zero DSMs
  libnvdimm/security: Require nvdimm_security_setup_events() to succeed
  nfit_test: fix security state pull for nvdimm security nfit_test

Pull input fixes from Dmitry Torokhov:
 "A fixup for the input_event fix for y2038 Sparc64, and couple other
  minor fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: input_event - fix the CONFIG_SPARC64 mixup
  Input: olpc_apsp - assign priv->dev earlier
  Input: uinput - fix undefined behavior in uinput_validate_absinfo()
  Input: raspberrypi-ts - fix link error
  Input: xpad - add support for SteelSeries Stratus Duo
  Input: input_event - provide override for sparc64

Pull networking fixes from David Miller:

 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.

 2) Integer overflow in ktime handling of bcm can code, from Oliver
    Hartkopp.

 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
    Horman.

 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.

 5) Use after free in ax25, from Eric Dumazet.

 6) Several fixes to the SSN support in SCTP, from Xin Long.

 7) Do not process frames after a NAPI reschedule in ibmveth, from
    Thomas Falcon.

 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
  qed: Revert error handling changes.
  cfg80211: extend range deviation for DMG
  cfg80211: reg: remove warn_on for a normal case
  mac80211: Add attribute aligned(2) to struct 'action'
  mac80211: don't initiate TDLS connection if station is not associated to AP
  nl80211: fix NLA_POLICY_NESTED() arguments
  ibmveth: Do not process frames after calling napi_reschedule
  net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
  net: usb: asix: ax88772_bind return error when hw_reset fail
  MAINTAINERS: Update cavium networking drivers
  net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
  net/mlx4_core: Add masking for a few queries on HCA caps
  sctp: set flow sport from saddr only when it's 0
  sctp: set chunk transport correctly when it's a new asoc
  sctp: improve the events for sctp stream adding
  sctp: improve the events for sctp stream reset
  ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
  ax25: fix possible use-after-free
  sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
  hv_netvsc: fix typos in code comments
  ...

We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.

This reverts commit 698cef17.

Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull smb3 fixes from Steve French:
 "A set of small smb3 fixes, some fixing various crediting issues
  discovered during xfstest runs, five for stable"

* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
  smb3: add credits we receive from oplock/break PDUs
  CIFS: Fix mounts if the client is low on credits
  CIFS: Do not assume one credit for async responses
  CIFS: Fix credit calculations in compound mid callback
  CIFS: Fix credit calculation for encrypted reads with errors
  CIFS: Fix credits calculations for reads with errors
  CIFS: Do not reconnect TCP session in add_credits()
  smb3: Cleanup license mess
  CIFS: Fix possible hang during async MTU reads and writes
  cifs: fix memory leak of an allocated cifs_ntsd structure

Pull VFIO fixes from Alex Williamson:

 - cleanup licenses in new files (Thomas Gleixner)

 - cleanup new compiler warnings (Alexey Kardashevskiy)

* tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci/nvlink2: Fix ancient gcc warnings
  vfio/pci: Cleanup license mess

Pull SCSI fixes from James Bottomley:
 "Six fixes, all of which appear to have user visible consequences.

  The DMA one is a regression fix from the merge window and of the
  others, four are driver specific and one specific to the target code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Use explicit access size in ufshcd_dump_regs
  scsi: tcmu: fix use after free
  scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
  scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
  scsi: communicate max segment size to the DMA mapping code

Pull block fixes from Jens Axboe:
 "A collection of fixes for this release. This contains:

   - Silence sparse rightfully complaining about non-static wbt
     functions (Bart)

   - Fixes for the zoned comments/ioctl documentation (Damien)

   - direct-io fix that's been lingering for a while (Ernesto)

   - cgroup writeback fix (Tejun)

   - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)

   - Block recursion tracking fix (Ming)

   - Fix debugfs command flag naming for a few flags (Jianchao)"

* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
  block: Fix comment typo
  uapi: fix ioctl documentation
  blk-wbt: Declare local functions static
  blk-mq: fix the cmd_flag_name array
  nvme-multipath: drop optimization for static ANA group IDs
  nvmet-rdma: fix null dereference under heavy load
  nvme-rdma: rework queue maps handling
  nvme-tcp: fix timeout handler
  nvme-rdma: fix timeout handler
  writeback: synchronize sync(2) against cgroup writeback membership switches
  block: cover another queue enter recursion via BIO_QUEUE_ENTERED
  direct-io: allow direct writes to empty inodes

This is new code and not bug fixes.

This reverts all changes added by merge commit
8fb18be9Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Ulf Hansson:

 - sdhci-acpi: Fixup build dependency for PCI

 - sdhci-omap: Resolve Kconfig warnings on keystone

 - sdhci-iproc: Propagate errors from DT parsing

 - meson-gx: Fixup IRQ handling in release callback

 - meson-gx: Use signal re-sampling to fixup tuning

 - dw_mmc-bluefield: Fix the license information

* tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc-bluefield: : Fix the license information
  mmc: meson-gx: enable signal re-sampling together with tuning
  mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
  mmc: meson-gx: Free irq in release() callback
  mmc: host: Fix Kconfig warnings on keystone_defconfig
  mmc: sdhci-acpi: Make PCI dependency explicit

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes to resolve some
  reported issues, as well as a number of binderfs fixups that were
  found after auditing the filesystem code by Al Viro. As binderfs
  hasn't been in a previous release yet, it's good to get these in now
  before the first users show up.

  All of these have been in linux-next for a bit with no reported
  issues"

* tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
  binderfs: switch from d_add() to d_instantiate()
  binderfs: drop lock in binderfs_binder_ctl_create
  binderfs: kill_litter_super() before cleanup
  binderfs: rework binderfs_binder_device_create()
  binderfs: rework binderfs_fill_super()
  binderfs: prevent renaming the control dentry
  binderfs: remove outdated comment
  binderfs: use __u32 for device numbers
  binderfs: use correct include guards in header
  misc: pvpanic: fix warning implicit declaration
  char/mwave: fix potential Spectre v1 vulnerability
  misc: ibmvsm: Fix potential NULL pointer dereference
  binderfs: fix error return code in binderfs_fill_super()
  mei: me: add denverton innovation engine device IDs
  mei: me: mark LBG devices as having dma support
  mei: dma: silent the reject message
  binderfs: handle !CONFIG_IPC_NS builds
  binderfs: reserve devices for initial mount
  binderfs: rename header to binderfs.h
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.0-rc4.

  They resolve some reported bugs and add a new device id for one
  driver. Nothing major at all, but all good to have.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ion: Support cpu access during dma_buf_detach
  staging: rtl8723bs: Fix build error with Clang when inlining is disabled
  staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1
  staging: vchiq: Fix local event signalling
  Staging: wilc1000: unlock on error in init_chip()
  staging: wilc1000: fix memory leak in wilc_add_rx_gtk
  staging: wilc1000: fix registration frame size