Convert the ingenic,intc.txt doc file to ingenic,intc.yaml.

Some compatible strings now require a fallback, as the controller
generally works the same across the SoCs families.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the ingenic,cgu.txt doc file to ingenic,cgu.yaml.

The binding documentation has been updated as well. The node can have a
child node that corresponds to the USB PHY, which happens to be present
in the middle of the CGU registers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

This arch_timer property was added in commit c950ca8c
("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
but I omitted the device tree binding documentation. Now
`make dtbs_check` prints the following warning for all A64 boards:

timer: 'allwinner,erratum-unknown1' does not match any of the regexes: 'pinctrl-[0-9]+'

Resolve this by documenting the erratum property.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Rob Herring <robh@kernel.org>

A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'power-domains' for Rockchip px30 usb nodes,
so add them to 'dwc2.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: gpu@ff400000:
'#cooling-cells', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'#cooling-cells' and 'power-domains'
for Rockchip px30 gpu nodes,
so add them to 'arm,mali-bifrost.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/
arm,mali-bifrost.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Sort the items in the compatible string list in increasing number of SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

arch/arm/boot/dts/uniphier-ref-daughter.dtsi has

  compatible = "microchip,24lc128", "atmel,24c128";

and 'make ARCH=arm dtbs_check' warns this:

  eeprom@50: compatible: ['microchip,24lc128', 'atmel,24c128'] is not valid under any of the given schemas (Possible causes of the failure)

Microchip 24LC128 is the device used on this board, and I see it in
https://www.microchip.com/wwwproducts/en/24LC128Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX7ULP watchdog binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX watchdog binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the MXS OCOTP binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX IIM binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX OCOTP binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX GPIO binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX8MM thermal binding to DT schema format using json-schema
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Renesas VMSA-Compatible IOMMU bindings documentation
to json-schema.

Note that original documentation doesn't mention renesas,ipmmu-vmsa
for R-Mobile APE6. But, R-Mobile APE6 is similar to the R-Car
Gen2. So, renesas,ipmmu-r8a73a4 belongs the renesas,ipmmu-vmsa
section.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document and section titles;
- Mark literal blocks as such;
- Add it to bindings/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document and section titles;
- Mark literal blocks as such;
- Add it to bindings/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

This file only requires a properly-formatted title to be
recognized as a ReST file.

As there will be more files under bindings/ that will be
included at the documentation body, add a new index.rst
file there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document and section titles;
- Adjust numerated list markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document title;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The devicetree.org doesn't host the Device_Tree_Usage page
anymore. So, fix the link to point to a new address.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document title;
- Use footnoote markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

There are some device tree documentation under
Documentation/devicetree. Add a top index file for it and
add the already-existing ReST file on it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The overlay implementation details in the compiled (DTB) file are
now properly implemented by the dtc compiler and should no longer
be hard coded in the source file.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

The Calxeda system registers are a collection of MMIO register
controlling several more general aspects of the SoC.
Beside for some power management tasks this node is also somewhat
abused as the container for the clock nodes.

Add a binding in DT schema format using json-schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the generic IPMI controller bindings to DT schema format
using json-schema.

The device_type property is deprecated for most node per the DT spec,
but at least the Linux driver matches on it, so I keep it in.

The Linux driver parses for some additional and optional properties,
but there are no in-tree users. Let's allow extra properties to cover
any other users.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Calxeda DDR memory controller binding to DT schema format
using json-schema.
Although this technically covers the whole DRAM controller, the
intention to use it only for error reporting and mapping fault addresses
to DRAM chips.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the L2-ECC controller binding to DT schema format using
json-schema.
This is indented to be just used for error reporting.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Calxeda ComboPHY binding to DT schema format using
json-schema.
There is no driver in the Linux kernel matching the compatible
string, but the nodes are parsed by the SATA driver, which links to them
using its port-phys property.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Calxeda XGMAC Ethernet device binding to DT schema format
using json-schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Calxeda Highbank SATA controller binding to DT schema format
using json-schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Calxeda clock bindings to DT schema format using json-schema.

This just covers the actual PLL and divider clock nodes. In the actual
DTs they are somewhat unconnected (no ranges or bus compatible) children
of the sregs node, but for the actual clock bindings this is not
relevant.

One oddity is that the addresses are relative to the parent node,
without that being pronounced using a ranges property.
But this is too late to fix now.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.

Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock
Signed-off-by: Rob Herring <robh@kernel.org>

The dtschema package must be somewhat up to date as the tools and
meta-schema checks are still evolving. Implement a version check,
so this can be enforced. This will help ensure new schema submissions
get checked against the latest meta-schemas.
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Some fixes were done during the conversion:

Slightly better examples. The original example was for an OMAP serial
port, which is not even described by this binding, but by
omap_serial.txt instead.

Added compatible strings, that were used, byt not documented:
andestech,uart16550, cavium,octeon-3860-uart, fsl,16550-FIFO64,
nvidia,tegra186-uart, nvidia,tegra194-uart, nxp,lpc1850-uart,
opencores,uart16550-rtlsvn105, ralink,mt7620a-uart, ralink,rt3052-uart,
ralink,rt3883-uart and xlnx,xps-uart16550-2.00.b.

Removed "serial" compatible string. It's redundant with the node name
(which, in OFW, serves the same purpose as the compatible string).
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: allow additional properties. clocks/clock-frequency can be
optional on original 8250 series with standard clocks]
Signed-off-by: Rob Herring <robh@kernel.org>

These ports are compatible with NS8250 and handled by the same driver.
Get rid of the extra document that fails to document the properties that
are actually supported.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>

When creating a consumer/supplier relationship between two devices,
make sure the supplier node is actually active. Otherwise this will
create a link relationship that will never be fulfilled. This, in the
worst case scenario, will hang the system during boot.

Note that, in practice, the fact that a device-tree represented
consumer/supplier relationship isn't fulfilled will not prevent devices
from successfully probing.

Fixes: a3e1d1a7 ("of: property: Add functional dependency link from DT bindings")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>