Patch from Sascha Hauser

Update H720x for system timer changes.

Convert all platform serial tables to use a serial8250 platform device
rather than declaring a static table in
include/asm-arm/arch-*/serial.h.  This change integrates patches from
Sascha Hauser to update H720x serial support, and Tony Lindgren to
update OMAP serial support.

Moxa is short the final cleanup from the tty changes so has extra wakeup
calls that can go

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Alan Cox <alan@lxorguk.ukuu.org.uk>
(some changes by me - bart)

The current driver looks at fields before it is safe to, we move the
mod15rm bug handler to be a fixup and this ensures the probe has been
completed before we use the ident data.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Alan Cox <alan@lxorguk.ukuu.org.uk>
(some changes by me - bart)

We add probe_hwif_init_with_fixup (seperate naming as requested by
Bartlomiej). This runs a fixup on present interfaces before attaching
the drives. In order to be useful we need also an _with_fixup version
of ide_register_hw function. 

The sometimes troublesome undecoded slave detector is moved to its own
function and exported so that ide-cs and the upcoming delkin_cb can both
use it (along with any arch specific cf/pcmcia drivers I don't know
about). The non-relevant checks for this scenario are removed.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Chris Wedgwood <cw@f00f.org>
(minor changes by me - bart)

Remove some accumulated (unused) cruft from ide.h
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_hwif_setup_dma() calls pci_set_master() if necessary.
pci_set_master() (indirectly via pcibios_set_master()) sets
PCI_LATENCY_TIMER to a "reasonable" value.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Grant Grundler <grundler@parisc-linux.org>
(minor changes by me - bart)

Move Superio (NatSem 87560) IDE hacks into the ns87415 driver
instead of exporting IDE data structures.

To date, only PA-RISC port is known to use the 87560 chip.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

sata_[misc,scr] and priv are write-only
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Tony Lindgren

This patch by Tuukka Tikkanen updates the OMAP clock framework.
It also contains a patch by Juha Yrjölä to enable 216MHz rate
on 16xx.

Signed-off-by: Tony Lindgren 
Signed-off-by: Russell King

Patch from Tony Lindgren

This patch changes OMAP serial ports to use the standard 8250
autodetection.

Signed-off-by: Tony Lindgren 
Signed-off-by: Russell King

Patch from Ben Dooks

Ensure that TI OMAP systems are only offered if
the system is configured for TI OMAP.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from Ben Dooks

Fix IDCODE for S3C2410A to add missing zero in hex number

Thanks to Russell King for pointing this out

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from Ben Dooks

Added missing exports of the functions in gpio.c

Thanks to Dimitry Andric for pointing this out

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

These are no longer necessary since MMC support is now merged.

Patch from Catalin Marinas

Versatile/AB code after splitting core.c
Versatile/PB code after splitting core.c

Patch from Catalin Marinas

Common changes for Versatile PB and AB

Patch from Catalin Marinas

Add ICS307 clock support

Accessing register index -1 causes vfp_get_double() to enter an
infinite loop.  Use VFP_REG_ZERO (value 16) and provide code to
emulate a sixteenth register which always returns 0.0

Patch from Nicolas Pitre

Fold two tests in one.

Signed-off-by: Nicolas Pitre 
Signed-off-by: Russell King

Patch from Ben Dooks

This fixes the following with s3c24xx power management:

- debugging needs UARTs enabled, to re-enabled UART clocks,
  save their state over suspend, and add this to the current
  documentation

- update the documentation on pm initialisation

- fix bug reported by Dimitry Andric where __raw_writel()
  has arguments the wrong way around

- fix typo (lower-case letter in S3C2410_GATSTUs2_OFFRESET)
  from Dimitry Andric

- apply Arnaud Patard's patch for pm call types

- move bits of resume code to use printk(KERN_DEBUG) as they
  are potentially before the UART resume, and are not critical
  if the system fails to re-start.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from John Lenz

Similar to sa1111.c, convert the locomo_probe function to use
the platform_get_resource\platform_get_irq instead of accessing
the pdev->resources array directly.

Patch from Peter Chubb

Fix a simple typo.

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre 
Signed-off-by: Russell King

Patch from Ben Dooks

Make addr_reg an `void __iomem *` instead of an unsigned long.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from Ben Dooks

Fix incorrect bit masking of the wake maskes for 
IRQs EINT0 through EINT3 and IRQ_RTC

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from Matthias Burghardt

In ssp_init dev->port is not yet initialized. Thus it cannot be used as an argument for request_mem_region. This patch fixes that.

Patch from Matthias Burghardt

Adds bit definitions for PXA Power Manager Wake-Up Enable Register (PWER) to pxa-regs.h

Signed-off-by: Matthias Burghardt
Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King

Add CONFIG_CPU_CACHE_VIVT and CONFIG_CPU_CACHE_VIPT and use
these to conditionalise cache_is_xxx().  This allows unnecessary
cache handling code to be removed by the compiler.

The __iomem attribute was correctly set, and trying to
remove it just causes more problems.

Too much cut-and-paste, hidden by the fact that without debugging,
"dev_dbg()" doesn't even look at its arguments.

It apparently really confuses some things (Apple keyboard
internal hub for one, but possibly others).

	This tiny bit of the last WE-17 patch was lost between me and
you. I initially decided to wait to resubmit, but Chris Wedgwood
reported that the MadWifi driver needs it. Sorry for not having pushed
harder.
	I recreated this patch, and tested with 2.6.10-rc1, and Chris
tested it with MadWifi. Would you mind pushing that up to Linus ?

Changelog :
	o remove unneeded const
	o spelling + comments
Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Experimented a bit more with mounting a bad ext2 filesystem.

An immediate crash was caused by zero EXT2_BLOCKS_PER_GROUP(sb).
The patch below (relative to 2.6.9) adds a few checks to make sure
that things we divide by are not zero.