- 12 Nov, 2019 18 commits
-
-
Takashi Iwai authored
commit 15c2b3cc upstream. The unsolicited event handler for the headphone jack on CA0132 codec driver tries to reschedule the another delayed work with cancel_delayed_work_sync(). It's no good idea, unfortunately, especially after we changed the work queue to the standard global one; this may lead to a stall because both works are using the same global queue. Fix it by dropping the _sync but does call cancel_delayed_work() instead. Fixes: 993884f6 ("ALSA: hda/ca0132 - Delay HP amp turnon.") BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Sakamoto authored
commit 706ad674 upstream. For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents configured source of sampling clock. The next lowest 8 bits represents whether the configured source is actually detected or not just after the register is changed for the source. Current implementation evaluates whole the register to detect configured source. This results in failure due to the next lowest 8 bits when the source is connected in advance. This commit fixes the bug. Fixes: 25784ec2 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series") Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jpSigned-off-by:
-
Takashi Iwai authored
commit e7af6307 upstream. The clean up commit 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()") unified the error handling code paths with the standard goto, but it introduced a subtle bug: the timer instance is stored in snd_timer_open() incorrectly even if it returns an error. This may eventually lead to UAF, as spotted by fuzzer. The culprit is the snd_timer_open() code checks the SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri. This variable is supposed to be the newly created instance, but we (ab-)used it for a temporary check before the actual creation of a timer instance. After that point, there is another check for the max number of instances, and it bails out if over the threshold. Before the refactoring above, it worked fine because the code returned directly from that point. After the refactoring, however, it jumps to the unified error path that stores the timeri variable in return -- even if it returns an error. Unfortunately this stored value is kept in the caller side (snd_timer_user_tselect()) in tu->timeri. This causes inconsistency later, as if the timer was successfully assigned. In this patch, we fix it by not re-using timeri variable but a temporary variable for testing the exclusive connection, so timeri remains NULL at that point. Fixes: 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()") Reported-and-tested-by:
Tristan Madani <tristmd@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.deSigned-off-by:
-
Salil Mehta authored
[ Upstream commit bf5a6b4c ] This patch fixes the problem of the spin locks, originally meant for the netpoll path of hns driver, causing deadlock in the normal NAPI poll path. The issue happened due to the presence of the stray leftover spin lock code related to the netpoll, whose support was earlier removed from the HNS[1], got activated due to enabling of NET_POLL_CONTROLLER switch. Earlier background: The netpoll handling code originally had this bug(as identified by Marc Zyngier[2]) of wrong spin lock API being used which did not disable the interrupts and hence could cause locking issues. i.e. if the lock were first acquired in context to thread like 'ip' util and this lock if ever got later acquired again in context to the interrupt context like TX/RX (Interrupts could always pre-empt the lock holding task and acquire the lock again) and hence could cause deadlock. Proposed Solution: 1. If the netpoll was enabled in the HNS driver, which is not right now, we could have simply used spin_[un]lock_irqsave() 2. But as netpoll is disabled, therefore, it is best to get rid of the existing locks and stray code for now. This should solve the problem reported by Marc. [1] https://git.kernel.org/torvalds/c/4bd2c03be7 [2] https://patchwork.ozlabs.org/patch/1189139/ Fixes: 4bd2c03b ("net: hns: remove ndo_poll_controller") Cc: lipeng <lipeng321@huawei.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Reported-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1bef4c22 ] While looking at a syzbot KCSAN report [1], I found multiple issues in this code : 1) fib6_nh->last_probe has an initial value of 0. While probably okay on 64bit kernels, this causes an issue on 32bit kernels since the time_after(jiffies, 0 + interval) might be false ~24 days after boot (for HZ=1000) 2) The data-race found by KCSAN I could use READ_ONCE() and WRITE_ONCE(), but we also can take the opportunity of not piling-up too many rt6_probe_deferred() works by using instead cmpxchg() so that only one cpu wins the race. [1] BUG: KCSAN: data-race in find_match / find_match write to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 1: rt6_probe net/ipv6/route.c:663 [inline] find_match net/ipv6/route.c:757 [inline] find_match+0x5bd/0x790 net/ipv6/route.c:733 __find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831 find_rr_leaf net/ipv6/route.c:852 [inline] rt6_select net/ipv6/route.c:896 [inline] fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164 ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200 ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452 fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117 ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484 ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497 ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049 ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150 inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106 inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline] tcp_xmit_probe_skb+0x19b/0x1d0 net/ipv4/tcp_output.c:3735 read to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 0: rt6_probe net/ipv6/route.c:657 [inline] find_match net/ipv6/route.c:757 [inline] find_match+0x521/0x790 net/ipv6/route.c:733 __find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831 find_rr_leaf net/ipv6/route.c:852 [inline] rt6_select net/ipv6/route.c:896 [inline] fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164 ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200 ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452 fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117 ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484 ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497 ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049 ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150 inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106 inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 18894 Comm: udevd Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: cc3a86c8 ("ipv6: Change rt6_probe to take a fib6_nh") Fixes: f547fac6 ("ipv6: rate-limit probes for neighbourless routes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Claudiu Manoil authored
[ Upstream commit 3b3eed8e ] lag_upper_info may be NULL on slave removal. Fixes: dc96ee37 ("net: mscc: ocelot: add bonding support") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Claudiu Manoil authored
[ Upstream commit 7afb3e57 ] The check that the event is actually for this device should be moved from the "port" handler to the net device handler. Otherwise the port handler will deny bonding configuration for other net devices in the same system (like enetc in the LS1028A) that don't have the lag_upper_info->tx_type restriction that ocelot has. Fixes: dc96ee37 ("net: mscc: ocelot: add bonding support") Signed-off-by:
-
Manish Chopra authored
[ Upstream commit deabc871 ] While rebooting the system with SR-IOV vfs enabled leads to below crash due to recurrence of __qede_remove() on the VF devices (first from .shutdown() flow of the VF itself and another from PF's .shutdown() flow executing pci_disable_sriov()) This patch adds a safeguard in __qede_remove() flow to fix this, so that driver doesn't attempt to remove "already removed" devices. [ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc [ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.360304] PGD 0 [ 194.360325] Oops: 0000 [#1] SMP [ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200 [ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables] [ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1 [ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019 [ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000 [ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282 [ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000 [ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098 [ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000 [ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000 [ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000 [ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000 [ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0 [ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 194.362051] PKRU: 55555554 [ 194.362073] Call Trace: [ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede] [ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0 [ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0 [ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30 [ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0 [ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20 [ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160 [ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0 [ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30 [ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed] [ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed] [ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed] [ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede] [ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede] [ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60 [ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0 [ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40 [ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60 [ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260 [ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0 [ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580 [ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0 [ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10 [ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a [ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0 [ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.363764] RSP <ffff9ceabebdfac0> [ 194.363791] CR2: 00000000000008dc Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 99a8efbb ] The variable nfcid_skb is not changed in the callee nfc_hci_get_param() if error occurs. Consequently, the freed variable nfcid_skb will be freed again, resulting in a double free bug. Set nfcid_skb to NULL after releasing it to fix the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 025ec40b ] The function nfc_put_device(dev) is called twice to drop the reference to dev when there is no associated local llcp. Remove one of them to fix the bug. Fixes: 52feb444 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support") Fixes: d9b8d8e1 ("NFC: llcp: Service Name Lookup netlink interface") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 517ce4e9 ] The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is incorrect, which may result in a system crash or other security impacts. The expected object to free is *fw_vsc_cfg. Signed-off-by:
-
Aleksander Morgado authored
[ Upstream commit e497df68 ] Exactly same layout as the default DW5821e module, just a different vid/pid. The QMI interface is exposed in USB configuration #1: P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Sean Tranchetti authored
[ Upstream commit e7a86c68 ] During the exit/unregistration process of the RmNet driver, the function rmnet_unregister_real_device() is called to handle freeing the driver's internal state and removing the RX handler on the underlying physical device. However, the order of operations this function performs is wrong and can lead to a use after free of the rmnet_port structure. Before calling netdev_rx_handler_unregister(), this port structure is freed with kfree(). If packets are received on any RmNet devices before synchronize_net() completes, they will attempt to use this already-freed port structure when processing the packet. As such, before cleaning up any other internal state, the RX handler must be unregistered in order to guarantee that no further packets will arrive on the device. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1b53d644 ] KCSAN reported the following data-race [1] The fix will also prevent the compiler from optimizing out the condition. [1] BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1: neigh_event_send include/net/neighbour.h:443 [inline] neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474 neigh_output include/net/neighbour.h:511 [inline] ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_output+0xdf/0x210 net/ipv4/ip_output.c:432 dst_output include/net/dst.h:436 [inline] ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532 ip_queue_xmit+0x45/0x60 include/net/ip.h:237 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline] __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618 read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0: neigh_event_send include/net/neighbour.h:442 [inline] neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474 neigh_output include/net/neighbour.h:511 [inline] ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_output+0xdf/0x210 net/ipv4/ip_output.c:432 dst_output include/net/dst.h:436 [inline] ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532 ip_queue_xmit+0x45/0x60 include/net/ip.h:237 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline] __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
-
Alexander Sverdlin authored
[ Upstream commit e4dd5608 ] Octeon's input ring-buffer entry has 14 bits-wide size field, so to account for second possible VLAN header max_mtu must be further reduced. Fixes: 109cc165 ("ethernet/cavium: use core min/max MTU checking") Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit e0a31262 ] Hendrik reported routes in the main table using source address are not removed when the address is removed. The problem is that fib_sync_down_addr does not account for devices in the default VRF which are associated with the main table. Fix by updating the table id reference. Fixes: 5a56a0b3 ("net: Don't delete routes in different VRFs") Reported-by:
Hendrik Donner <hd@os-cillation.de> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 332f989a ] A malicious device may give half an answer when asked for its MTU. The driver will proceed after this with a garbage MTU. Anything but a complete answer must be treated as an error. V2: used sizeof as request by Alexander Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Jay Vosburgh authored
[ Upstream commit 1899bb32 ] Since de77ecd4 ("bonding: improve link-status update in mii-monitoring"), the bonding driver has utilized two separate variables to indicate the next link state a particular slave should transition to. Each is used to communicate to a different portion of the link state change commit logic; one to the bond_miimon_commit function itself, and another to the state transition logic. Unfortunately, the two variables can become unsynchronized, resulting in incorrect link state transitions within bonding. This can cause slaves to become stuck in an incorrect link state until a subsequent carrier state transition. The issue occurs when a special case in bond_slave_netdev_event sets slave->link directly to BOND_LINK_FAIL. On the next pass through bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL case will set the proposed next state (link_new_state) to BOND_LINK_UP, but the new_link to BOND_LINK_DOWN. The setting of the final link state from new_link comes after that from link_new_state, and so the slave will end up incorrectly in _DOWN state. Resolve this by combining the two variables into one. Reported-by:
Aleksei Zakharov <zakharov.a.g@yandex.ru> Reported-by:
Sha Zhang <zhangsha.zhang@huawei.com> Cc: Mahesh Bandewar <maheshb@google.com> Fixes: de77ecd4 ("bonding: improve link-status update in mii-monitoring") Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
- 10 Nov, 2019 22 commits
-
-
Greg Kroah-Hartman authored
-
Roger Quadros authored
commit 163be6ff upstream. If a gadget driver is in the pending drivers list, a UDC becomes available and udc_bind_to_driver() fails, then it gets deleted from the pending list. i.e. list_del(&driver->pending) in check_pending_gadget_drivers(). Then if that gadget driver is unregistered, usb_gadget_unregister_driver() does a list_del(&driver->pending) again thus causing a page fault as that list entry has been poisoned by the previous list_del(). Fix this by using list_del_init() instead of list_del() in check_pending_gadget_drivers(). Test case: - Make sure no UDC is available - modprobe g_mass_storage file=wrongfile - Load UDC driver so it becomes available lun0: unable to open backing file: wrongfile - modprobe -r g_mass_storage [ 60.900431] Unable to handle kernel paging request at virtual address dead000000000108 [ 60.908346] Mem abort info: [ 60.911145] ESR = 0x96000044 [ 60.914227] Exception class = DABT (current EL), IL = 32 bits [ 60.920162] SET = 0, FnV = 0 [ 60.923217] EA = 0, S1PTW = 0 [ 60.926354] Data abort info: [ 60.929228] ISV = 0, ISS = 0x00000044 [ 60.933058] CM = 0, WnR = 1 [ 60.936011] [dead000000000108] address between user and kernel address ranges [ 60.943136] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 60.948691] Modules linked in: g_mass_storage(-) usb_f_mass_storage libcomposite xhci_plat_hcd xhci_hcd usbcore ti_am335x_adc kfifo_buf omap_rng cdns3 rng_core udc_core crc32_ce xfrm_user crct10dif_ce snd_so6 [ 60.993995] Process modprobe (pid: 834, stack limit = 0x00000000c2aebc69) [ 61.000765] CPU: 0 PID: 834 Comm: modprobe Not tainted 4.19.59-01963-g065f42a60499 #92 [ 61.008658] Hardware name: Texas Instruments SoC (DT) [ 61.014472] pstate: 60000005 (nZCv daif -PAN -UAO) [ 61.019253] pc : usb_gadget_unregister_driver+0x7c/0x108 [udc_core] [ 61.025503] lr : usb_gadget_unregister_driver+0x30/0x108 [udc_core] [ 61.031750] sp : ffff00001338fda0 [ 61.035049] x29: ffff00001338fda0 x28: ffff800846d40000 [ 61.040346] x27: 0000000000000000 x26: 0000000000000000 [ 61.045642] x25: 0000000056000000 x24: 0000000000000800 [ 61.050938] x23: ffff000008d7b0d0 x22: ffff0000088b07c8 [ 61.056234] x21: ffff000001100000 x20: ffff000002020260 [ 61.061530] x19: ffff0000010ffd28 x18: 0000000000000000 [ 61.066825] x17: 0000000000000000 x16: 0000000000000000 [ 61.072121] x15: 0000000000000000 x14: 0000000000000000 [ 61.077417] x13: ffff000000000000 x12: ffffffffffffffff [ 61.082712] x11: 0000000000000030 x10: 7f7f7f7f7f7f7f7f [ 61.088008] x9 : fefefefefefefeff x8 : 0000000000000000 [ 61.093304] x7 : ffffffffffffffff x6 : 000000000000ffff [ 61.098599] x5 : 8080000000000000 x4 : 0000000000000000 [ 61.103895] x3 : ffff000001100020 x2 : ffff800846d40000 [ 61.109190] x1 : dead000000000100 x0 : dead000000000200 [ 61.114486] Call trace: [ 61.116922] usb_gadget_unregister_driver+0x7c/0x108 [udc_core] [ 61.122828] usb_composite_unregister+0x10/0x18 [libcomposite] [ 61.128643] msg_cleanup+0x18/0xfce0 [g_mass_storage] [ 61.133682] __arm64_sys_delete_module+0x17c/0x1f0 [ 61.138458] el0_svc_common+0x90/0x158 [ 61.142192] el0_svc_handler+0x2c/0x80 [ 61.145926] el0_svc+0x8/0xc [ 61.148794] Code: eb03003f d10be033 54ffff21 a94d0281 (f9000420) [ 61.154869] ---[ end trace afb22e9b637bd9a7 ]--- Segmentation fault Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suman Anna authored
commit 389ce1a7 upstream. The gic-its node unit-address has an additional zero compared to the actual reg value. Fix it. Fixes: ea47eed3 ("arm64: dts: ti: Add Support for AM654 SoC") Reported-by:
Robert Tivy <rtivy@ti.com> Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
commit 7b2db65b upstream. 24 bits is supported in all modes and 16 bit only when the codec is slave and the DAI is set to RIGHT_J. Remove the unsupported sample format. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190919071652.31724-1-peter.ujfalusi@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Desnes A. Nunes do Rosario authored
commit 5b216ea1 upstream. Newer versions of GCC (>= 9) demand that the size of the string to be copied must be explicitly smaller than the size of the destination. Thus, the NULL char has to be taken into account on strncpy. This will avoid the following compiling error: tlbie_test.c: In function 'main': tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size strncpy(logdir, optarg, LOGDIR_NAME_SIZE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by:
Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com [sandipan: Backported to v4.19] Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 93cad5f7 upstream. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Some minor fixes to make it build] Signed-off-by:
-
Aneesh Kumar K.V authored
commit 047e6575 upstream. On POWER9, under some circumstances, a broadcast TLB invalidation will fail to invalidate the ERAT cache on some threads when there are parallel mtpidr/mtlpidr happening on other threads of the same core. This can cause stores to continue to go to a page after it's unmapped. The workaround is to force an ERAT flush using PID=0 or LPID=0 tlbie flush. This additional TLB flush will cause the ERAT cache invalidation. Since we are using PID=0 or LPID=0, we don't get filtered out by the TLB snoop filtering logic. We need to still follow this up with another tlbie to take care of store vs tlbie ordering issue explained in commit: a5d4b589 ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9"). The presence of ERAT cache implies we can still get new stores and they may miss store queue marking flush. Cc: stable@vger.kernel.org Signed-off-by:
-
Jan Kiszka authored
commit ad0d315b upstream. The SIMATIC IPC227E uses the PMC clock for on-board components and gets stuck during boot if the clock is disabled. Therefore, add this device to the critical systems list. Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Maxim Mikityanskiy authored
[ Upstream commit 32b5a2c9 ] Commit 715a1233 ("wireless: don't write C files on failures") drops the `test -f $$f` check. The list of targets contains the CONFIG_CFG80211_EXTRA_REGDB_KEYDIR directory itself, and this check used to filter it out. After the check was removed, the extra keydir option no longer works, failing with the following message: od: 'standard input': read error: Is a directory This commit restores the check to make extra keydir work again. Fixes: 715a1233 ("wireless: don't write C files on failures") Signed-off-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 55667441 ] UDP IPv6 packets auto flowlabels are using a 32bit secret (static u32 hashrnd in net/core/flow_dissector.c) and apply jhash() over fields known by the receivers. Attackers can easily infer the 32bit secret and use this information to identify a device and/or user, since this 32bit secret is only set at boot time. Really, using jhash() to generate cookies sent on the wire is a serious security concern. Trying to change the rol32(hash, 16) in ip6_make_flowlabel() would be a dead end. Trying to periodically change the secret (like in sch_sfq.c) could change paths taken in the network for long lived flows. Let's switch to siphash, as we did in commit df453700 ("inet: switch IP ID generator to siphash") Using a cryptographically strong pseudo random function will solve this privacy issue and more generally remove other weak points in the stack. Packet schedulers using skb_get_hash_perturb() benefit from this change. Fixes: b5677416 ("ipv6: Enable auto flow labels by default") Fixes: 42240901 ("ipv6: Implement different admin modes for automatic flow labels") Fixes: 67800f9b ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel") Fixes: cb1ce2ef ("ipv6: Implement automatic flow label generation on transmit") Signed-off-by:
Jonathan Berger <jonathann1@walla.com> Reported-by:
Amit Klein <aksecurity@gmail.com> Reported-by:
Benny Pinkas <benny@pinkas.net> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Kazutoshi Noguchi authored
[ Upstream commit b3060531 ] This device is sold as 'ThinkPad USB-C Dock Gen 2 (40AS)'. Chipset is RTL8153 and works with r8152. Without this, the generic cdc_ether grabs the device, and the device jam connected networks up when the machine suspends. Signed-off-by:
Kazutoshi Noguchi <noguchi.kazutosi@gmail.com> Signed-off-by:
-
Vivien Didelot authored
[ Upstream commit 50c7d2ba ] If there are multiple switch trees on the device, only the last one will be listed, because the arguments of list_add_tail are swapped. Fixes: 83c0afae ("net: dsa: Add new binding implementation") Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit 38b4fe32 ] As soon as the netdev is registers, the kernel can start using the interface. If the driver connects the MAC to the PHY after the netdev is registered, there is a race condition where the interface can be opened without having the PHY connected. Change the order to close this race condition. Fixes: 92571a1a ("lan78xx: Connect phy early") Reported-by:
Daniel Wagner <dwagner@suse.de> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Doug Berger authored
[ Upstream commit 25382b99 ] The EPHY integrated into the 40nm Set-Top Box devices can falsely detect energy when connected to a disabled peer interface. When the peer interface is enabled the EPHY will detect and report the link as active, but on occasion may get into a state where it is not able to exchange data with the connected GENET MAC. This issue has not been observed when the link parameters are auto-negotiated; however, it has been observed with a manually configured link. It has been empirically determined that issuing a soft reset to the EPHY when energy is detected prevents it from getting into this bad state. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
-
Doug Berger authored
[ Upstream commit fe586b82 ] The internal 40nm EPHYs use a "Workaround for putting the PHY in IDDQ mode." These PHYs require a soft reset to restore functionality after they are powered back up. This commit defines the soft_reset function to use genphy_soft_reset during phy_init_hw to accommodate this. Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset") Signed-off-by:
-
Doug Berger authored
[ Upstream commit 7de48402 ] When commit 28b2e0d2 ("net: phy: remove parameter new_link from phy_mac_interrupt()") removed the new_link parameter it set the phydev->link state from the MAC before invoking phy_mac_interrupt(). However, once commit 88d6272a ("net: phy: avoid unneeded MDIO reads in genphy_read_status") was added this initialization prevents the proper determination of the connection parameters by the function genphy_read_status(). This commit removes that initialization to restore the proper functionality. Fixes: 88d6272a ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit c763ac43 ] Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by:
Hubert Feurstein <h.feurstein@gmail.com> Fixes: ed3af5fd ("net: dsa: b53: Add support for port mirroring") Signed-off-by:
-
Aya Levin authored
[ Upstream commit 534e7366 ] Ethtool self test contains a test for link speed. This test reads the PTYS register and determines whether the current speed is valid or not. Change current implementation to use the function mlx5e_port_linkspeed() that does the same check and fails when speed is invalid. This code redundancy lead to a bug when mlx5e_port_linkspeed() was updated with expended speeds and the self test was not. Fixes: 2c81bfd5 ("net/mlx5e: Move port speed code from en_ethtool.c to en/port.c") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 62bdc8fd ] As reported in [0] at least one RTL8168dp version has problems establishing a link. This chip version has an integrated RTL8211b PHY, however the chip seems to report a wrong PHY ID, resulting in a wrong PHY driver (for Generic Realtek PHY) being loaded. Work around this issue by adding a hook to r8168dp_2_mdio_read() for returning the correct PHY ID. [0] https://bbs.archlinux.org/viewtopic.php?id=246508 Fixes: 242cd9b5 ("r8169: use phy_resume/phy_suspend") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Maxim Mikityanskiy authored
[ Upstream commit 9df86bdb ] When CQE compression is enabled, compressed CQEs use the following structure: a title is followed by one or many blocks, each containing 8 mini CQEs (except the last, which may contain fewer mini CQEs). Due to NAPI budget restriction, a complete structure is not always parsed in one NAPI run, and some blocks with mini CQEs may be deferred to the next NAPI poll call - we have the mlx5e_decompress_cqes_cont call in the beginning of mlx5e_poll_rx_cq. However, if the budget is extremely low, some blocks may be left even after that, but the code that follows the mlx5e_decompress_cqes_cont call doesn't check it and assumes that a new CQE begins, which may not be the case. In such cases, random memory corruptions occur. An extremely low NAPI budget of 8 is used when busy_poll or busy_read is active. This commit adds a check to make sure that the previous compressed CQE has been completely parsed after mlx5e_decompress_cqes_cont, otherwise it prevents a new CQE from being fetched in the middle of a compressed CQE. This commit fixes random crashes in __build_skb, __page_pool_put_page and other not-related-directly places, that used to happen when both CQE compression and busy_poll/busy_read were enabled. Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 37de3b35 ] This patch adds two more tests to ipv4_addr_metric_test() to explicitly cover the scenarios fixed by the previous patch. Suggested-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Paolo Abeni authored
[ Upstream commit 0b834ba0 ] Since commit af4d768a ("net/ipv4: Add support for specifying metric of connected routes"), when updating an IP address with a different metric, the associated connected route is updated, too. Still, the mentioned commit doesn't handle properly some corner cases: $ ip addr add dev eth0 192.168.1.0/24 $ ip addr add dev eth0 192.168.2.1/32 peer 192.168.2.2 $ ip addr add dev eth0 192.168.3.1/24 $ ip addr change dev eth0 192.168.1.0/24 metric 10 $ ip addr change dev eth0 192.168.2.1/32 peer 192.168.2.2 metric 10 $ ip addr change dev eth0 192.168.3.1/24 metric 10 $ ip -4 route 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.0 192.168.2.2 dev eth0 proto kernel scope link src 192.168.2.1 192.168.3.0/24 dev eth0 proto kernel scope link src 192.168.2.1 metric 10 Only the last route is correctly updated. The problem is the current test in fib_modify_prefix_metric(): if (!(dev->flags & IFF_UP) || ifa->ifa_flags & (IFA_F_SECONDARY | IFA_F_NOPREFIXROUTE) || ipv4_is_zeronet(prefix) || prefix == ifa->ifa_local || ifa->ifa_prefixlen == 32) Which should be the logical 'not' of the pre-existing test in fib_add_ifaddr(): if (!ipv4_is_zeronet(prefix) && !(ifa->ifa_flags & IFA_F_SECONDARY) && (prefix != addr || ifa->ifa_prefixlen < 32)) To properly negate the original expression, we need to change the last logical 'or' to a logical 'and'. Fixes: af4d768a ("net/ipv4: Add support for specifying metric of connected routes") Reported-and-suggested-by:
Beniamino Galvani <bgalvani@redhat.com> Signed-off-by:
-
