Merge tag 'bcm2835-for-3.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc

From Stephen Warren:
ARM: bcm2835: SoC driver updates

The bcm2835 clock driver is enhanced to allow fixed clocks to be probed
from device tree.

A system power-off implementation is added.

This branch is based on v3.8-rc3.

* tag 'bcm2835-for-3.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: add a pm_power_off implementation
  clk: bcm2835: probe for fixed-clock in device tree
Signed-off-by: Olof Johansson <olof@lixom.net>

From Sekhar Nori:
DaVinci SoC changes for v3.9

This pull request:

1) Fixes a bug with the way SPI devices were registered on DA850
2) Adds support for DSP clock and resetting the DSP on DA850
3) Fixes checkpatch issue with some existing files.

* tag 'davinci-for-v3.9/soc' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: da850: add dsp clock definition
  ARM: davinci: psc: introduce reset API
  ARM: davinci: psc.c: change pr_warning() to pr_warn()
  ARM: davinci: devices-da8xx.c: change pr_warning() to pr_warn()
  ARM: davinci: da8xx_register_spi() should not register SPI board info
Signed-off-by: Olof Johansson <olof@lixom.net>

From Simon Horman, a series of SoC updates for shmobile.

* 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED()
  ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT
  ARM: mach-shmobile: sh73a0: Minimal setup using DT
  ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT
  ARM: SH-Mobile: sh73a0: Add CPU Hotplug
  ARM: SH-Mobile: sh73a0: Secondary CPUs handle own SCU flags
  ARM: shmobile: r8a7740: Add CPU sleep suspend
  ARM: shmobile: sh73a0: Add CPU sleep suspend
  ARM: shmobile: add function declarations for sh7372 DT helper functions
  ARM: sh7372: fix cache clean / invalidate order
  ARM: sh7372: add clock lookup entries for DT-based devices
  ARM: mach-shmobile: sh73a0 external IRQ wake update
  ARM: shmobile: sh73a0: fixup div4_clks bitmap
  ARM: shmobile: r8a7740: add TMU timer support
  ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c
Signed-off-by: Olof Johansson <olof@lixom.net>

Fix trivial conflict in board_bcm due to Simon resolving the same conflict
with one less line of whitespace. Keeping end result common with what
we already have in arm-soc.

Conflicts:
	arch/arm/mach-bcm/board_bcm.c

From Sascha Hauer:
ARM i.MX SoC updates for next

Mostly clock related updates, most notably the conversion of
i.MX31 to a DT based lookup.

* tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM: clk-imx35: Fix build warnings with W=1
  ARM: imx27: add a clock gate to activate SPLL clock
  ARM: mx31: Replace clk_register_clkdev with clock DT lookup
  ARM: clk-imx31: Add dummy clock
  ARM: Let CONFIG_MACH_IMX31_DT be built by default
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge branch 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/soc

From Barry Song, this adds support for a new SoC from CSR; marco. It's
SMP, uses GIC instead of VIC and in general needs a bit of rework of
the platform code for setup, which this branch contains.

* 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel:
  ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco
  ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures
  ARM: PRIMA2: irq: make prima2 irq can work even we enable GIC for Marco
  ARM: PRIMA2: rtciobg: it is also compatible with marco
  ARM: PRIMA2: rstc: enable the support for Marco
  ARM: PRIMA2: mv timer to timer-prima2 as we will add timer-marco
  ARM: PRIMA2: initialize l2x0 according to mach from DT
  ARM: PRIMA2: enable AUTO_ZRELADDR for SIRF in Kconfig
  ARM: PRIMA2: add CSR SiRFmarco device tree .dts
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Olof Johansson <olof@lixom.net>

Fix the following warnings when building with W=1 option:

arch/arm/mach-imx/clk-imx35.c: In function 'mx35_clocks_init':
arch/arm/mach-imx/clk-imx35.c:70:12: warning: old-style function definition [-Wold-style-definition]
arch/arm/mach-imx/clk-imx35.c:201:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

A clock gate is mandatory to activate SPLL clock needed, at least, for usb.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Similarly as it was done for mx6q, use a DT lookup in order to make maintainance
task for the clock devices easier.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add dummy clock as it is required by some i.mx drivers.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Let CONFIG_MACH_IMX31_DT be built by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch tidyup scif .irqs settings by using
SCIx_IRQ_MUXED() macro.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This device also requires a voltage regulator which
should be defined in a board-specific maner. An example
dts snipped follows.

/ {
	fixedregulator1v8: fixedregulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};
};

&mmcif {
	vmmc-supply = <&fixedregulator1v8>;
	vqmmc-supply = <&fixedregulator1v8>;
};
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Allow a minimal setup of the sh73a0 SoC using a flattened device tree.
In particular, Configure the i2c controllers using a flattened device tree.

SCI serial controller and CMT clock source, whose drivers do not yet
support configuration using a flattened device tree, are still configured
using C code in order to allow booting of a board with this SoC.

*** Please note that the clock initialisation scheme used in
    this patch does not currently work with SMP as there
    is a yet to be resolved lock-up in workqueue initialisation.

    CONFIG_SMP must be disabled when using this code. ***

Includes update from Thierry Reding to no longer use gic_handle_irq()

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

fix

This allows the GIC interrupt controller of the sh73a0 SoC to be
initialised using a flattened device tree blob.

It does not allow the INTC interrupt controller which is also present on
the sh73a0 SoC to be enabled via device tree.  Nor does it handle sharing
of interrupts between the GIC and INTC interrupt controllers.

This limits the usefulness of this code to applications which only wish to
access devices which use interrupts that can be handled by the GIC
interrupt controller. Other applications should, for now, continue using
non-device tree initialisation of the sh72a0 interrupt controllers.

Includes update to use irqchip_init() by Thierry Reding

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add the capability to add and remove CPUs on the fly.
The Cortex-A9 offers the possibility to take single cores out of the
MP Core. We add this capabilty taking care that caches are kept
coherent. For verifying the shutdown we rely on the internal SH73A0
Power Status Register PSTR.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

When booting secondary CPUs we have used the main CPU to set up the
Snoop Control Unit flags of these CPUs. It is a cleaner approach
if every CPU takes care of its own flags. We avoid the need for
locking and the program logic is more concise. With this patch the file
headsmp-sh73a0.S is added that contains a startup vector for secondary CPUs
that sets up its own SCU flags.
Further in sh73a0_smp_prepare_cpus() we can rely on the generic ARM helper
scu_power_mode(). This is possible as we don't cross borders anymore (every
CPU handles its own flags) and need no locking. So we can throw out the
needless function modify_scu_cpu_psr().
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep.
It is entered by a simple dsb and wfi instruction via cpu_do_idle(). As
just clocks are stopped there is no need to save or restore any state of
the system.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
[ horms@verge.net.au: Added missing includes ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep. It is
entered by a simple dsb and wfi instruction via cpu_do_idle(). As just
clocks are stopped there is no need to save or restore any state of the
system.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh7372_add_early_devices_dt() and sh7372_add_standard_devices_dt() are
defined as global functions in arch/arm/mach-shmobile/setup-sh7372.c,
but their declarations are missing. Add them to common.h, where similar
functions for this and other SoC types are already declared.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms@verge.net.au>

According to the Cortex A8 TRM the L2 cache should be first cleaned and
then disabled. Fix the swapped order on sh7372.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

When booting with DT, devices are named differently. To get their clocks
additional entries have to be added to the lookup table.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms@verge.net.au>

Use sh73a0_set_wake() for external IRQ signals on sh73a0.

The sh73a0 IRQ hardware for external IRQ pins consists of
the INTCA interrupt controller and the GIC together doing
their best to limp along. These external IRQ pins are
treated as a special case where interrupts need to be
managed in both interrupt controllers in parallel.

The ->irq_set_wake() callback for the external IRQ pins
can be dealt with in the same way as INTCA-only without
involving the GIC. So this patch updates the external
IRQ pin code for sh73a0 to no longer involve the GIC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

div4_clks's bitmap of sh73a0 was wrong.
This patch is based on v2.0 datasheet.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch enabled TMU0 timer on r8a7740.
But TMU1 timer is not supported yet
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

linux/dma-mapping.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Conflicts:
	arch/arm/mach-bcm/board_bcm.c
	arch/arm/mach-cns3xxx/cns3420vb.c
	arch/arm/mach-ep93xx/adssphere.c
	arch/arm/mach-ep93xx/edb93xx.c
	arch/arm/mach-ep93xx/gesbc9312.c
	arch/arm/mach-ep93xx/micro9.c
	arch/arm/mach-ep93xx/simone.c
	arch/arm/mach-ep93xx/snappercl15.c
	arch/arm/mach-ep93xx/ts72xx.c
	arch/arm/mach-ep93xx/vision_ep9307.c
	arch/arm/mach-highbank/highbank.c
	arch/arm/mach-imx/mach-imx6q.c
	arch/arm/mach-msm/board-dt-8960.c
	arch/arm/mach-netx/nxdb500.c
	arch/arm/mach-netx/nxdkn.c
	arch/arm/mach-netx/nxeb500hmi.c
	arch/arm/mach-nomadik/board-nhk8815.c
	arch/arm/mach-picoxcell/common.c
	arch/arm/mach-realview/realview_eb.c
	arch/arm/mach-realview/realview_pb1176.c
	arch/arm/mach-realview/realview_pb11mp.c
	arch/arm/mach-realview/realview_pba8.c
	arch/arm/mach-realview/realview_pbx.c
	arch/arm/mach-socfpga/socfpga.c
	arch/arm/mach-spear13xx/spear1310.c
	arch/arm/mach-spear13xx/spear1340.c
	arch/arm/mach-spear13xx/spear13xx.c
	arch/arm/mach-spear3xx/spear300.c
	arch/arm/mach-spear3xx/spear310.c
	arch/arm/mach-spear3xx/spear320.c
	arch/arm/mach-spear3xx/spear3xx.c
	arch/arm/mach-spear6xx/spear6xx.c
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/board-dt-tegra30.c
	arch/arm/mach-u300/core.c
	arch/arm/mach-ux500/board-mop500.c
	arch/arm/mach-ux500/cpu-db8500.c
	arch/arm/mach-versatile/versatile_ab.c
	arch/arm/mach-versatile/versatile_dt.c
	arch/arm/mach-versatile/versatile_pb.c
	arch/arm/mach-vexpress/v2m.c
	include/asm-generic/vmlinux.lds.h

Added dsp clock definition, keyed to "davinci-rproc.0".
DSP clocks is derived from pll0 sysclk1. Add a clock tree
node for that too.
Signed-off-by: Robert Tivy <rtivy@ti.com>
[nsekhar@ti.com: merge addition of pll0 sysclk1 and dsp clock
into one commit. Add PSC_FORCE to dsp clock node to handle the
case where DSP does not go into IDLE and its clock needs to
be disabled.]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Introduce an IP reset API for use on DaVinci SoC.

There is no existing "reset" framework support for SoC devices.
The remoteproc driver needs explicit control of the DSP's reset line.
To support this, a new DaVinci specific API is added.

This private API will disappear with DT migration.  Some discussion
regarding a proposed DT "reset" binding is here:
https://patchwork.kernel.org/patch/1635051/

Modify davinci_clk_init() to set clk "reset" function for clocks
that indicate PSC_LRST support.  Also fix indentation issue with
function opening curly brace.
Signed-off-by: Robert Tivy <rtivy@ti.com>
[nsekhar@ti.com: rename davinci_psc_config_reset() to davinci_psc_reset()]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

prima2 and marco has different memory base, the old code will
fail if we enable DEBUG_LL in marco.
this patch adds two debuf port, while debugging, we select one
of PRIMA2 and MARCO debug ports, in the products, we disable
DEBUG_LL.
Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch adds tick timer, smp entries and generic DT machine
for SiRFmarco dual-core SMP chips.

with the added marco, we change the defconfig, using the same
defconfig, we get a zImage which can work on both prima2 and
marco.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Cc: Mark Rutland <mark.rutland@arm.com>

in Marco, we will use GIC. this patch prepares the handle_irq for prima2
to avoid the compiling errors since we want only one defconfig and zImage
for both prima2 and marco that means we will need handle_irq for both.
Signed-off-by: Baohua Song <Baohua.Song@csr.com>

Signed-off-by: Barry Song <Baohua.Song@csr.com>

marco has SET/CLEAR registers pair for rstc to avoid read-modify-write,
this patch detects the mach typer and access registers based on SoC.
Signed-off-by: Barry Song <Baohua.Song@csr.com>

Marco timer has different timer IP with prima2, so rename the current timer
to timer-prima2 so that we can add timer-marco.

at the same time, if we don't find prima2 timer node in dt, don't panic the
system as we will make prima2 and marco use same kernel image.
Signed-off-by: Barry Song <Baohua.Song@csr.com>

prima2 and marco have diffetent l2 cache configuration, so
we initialize l2x0 cache based on dtb given to kernel.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>

prima2 and marco have different memory base address. prima2
begins from 0 and marco begins from 0x40000000.
This patch enables AUTO_ZRELADDR so that kernel can detect
the physical address automatically.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
CC: Mark Rutland <mark.rutland@arm.com>

SiRFmarco is a dual-core cortex-a9 SMP SoC from CSR. this patch
adds the .dtsi and a basic evb board .dts for it.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>

* vt8500/wm8x50:
  dts: vt8500: Add initial dts support for WM8850

This patch adds a soc dtsi for the Wondermedia WM8850.

A board dts file is also included for the W70v2 tablet, with support
for all the drivers currently in mainline.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>