- 20 May, 2017 33 commits
-
-
Peter Zijlstra authored
commit 12ca6ad2 upstream. There's a race on CPU unplug where we free the swevent hash array while it can still have events on. This will result in a use-after-free which is BAD. Simply do not free the hash array on unplug. This leaves the thing around and no use-after-free takes place. When the last swevent dies, we do a for_each_possible_cpu() iteration anyway to clean these up, at which time we'll free it, so no leakage will occur. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Suzuki K. Poulose authored
commit 8fff105e upstream. The perf core implicitly rejects events spanning multiple HW PMUs, as in these cases the event->ctx will differ. However this validation is performed after pmu::event_init() is called in perf_init_event(), and thus pmu::event_init() may be called with a group leader from a different HW PMU. The ARM64 PMU driver does not take this fact into account, and when validating groups assumes that it can call to_arm_pmu(event->pmu) for any HW event. When the event in question is from another HW PMU this is wrong, and results in dereferencing garbage. This patch updates the ARM64 PMU driver to first test for and reject events from other PMUs, moving the to_arm_pmu and related logic after this test. Fixes a crash triggered by perf_fuzzer on Linux-4.0-rc2, with a CCI PMU present: Bad mode in Synchronous Abort handler detected, code 0x86000006 -- IABT (current EL) CPU: 0 PID: 1371 Comm: perf_fuzzer Not tainted 3.19.0+ #249 Hardware name: V2F-1XV7 Cortex-A53x2 SMM (DT) task: ffffffc07c73a280 ti: ffffffc07b0a0000 task.ti: ffffffc07b0a0000 PC is at 0x0 LR is at validate_event+0x90/0xa8 pc : [<0000000000000000>] lr : [<ffffffc000090228>] pstate: 00000145 sp : ffffffc07b0a3ba0 [< (null)>] (null) [<ffffffc0000907d8>] armpmu_event_init+0x174/0x3cc [<ffffffc00015d870>] perf_try_init_event+0x34/0x70 [<ffffffc000164094>] perf_init_event+0xe0/0x10c [<ffffffc000164348>] perf_event_alloc+0x288/0x358 [<ffffffc000164c5c>] SyS_perf_event_open+0x464/0x98c Code: bad PC value Also cleans up the code to use the arm_pmu only when we know that we are dealing with an arm pmu event. Cc: Will Deacon <will.deacon@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Peter Zijlstra authored
commit f63a8daa upstream. There have been a few reported issues wrt. the lack of locking around changing event->ctx. This patch tries to address those. It avoids the whole rwsem thing; and while it appears to work, please give it some thought in review. What I did fail at is sensible runtime checks on the use of event->ctx, the RCU use makes it very hard. Signed-off-by:
-
Mark Rutland authored
commit c623b33b upstream. As with x86, mark the sys_call_table const such that it will be placed in the .rodata section. This will cause attempts to modify the table (accidental or deliberate) to fail when strict page permissions are in place. In the absence of strict page permissions, there should be no functional change. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Szymon Janc authored
commit ab89f0bd upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marko Kiiskila <marko@runtime.io> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hovold authored
commit 77e6fe7f upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc262 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Johan Hovold authored
commit 099bd73d upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7d ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
NeilBrown authored
commit 0c9d5b12 upstream. fix_sync_read_error() modifies a bio on a newly faulty device by setting bi_end_io to end_sync_write. This ensure that put_buf() will still call rdev_dec_pending() as required, but makes sure that subsequent code in fix_sync_read_error() doesn't try to read from the device. Unfortunately this interacts badly with sync_request_write() which assumes that any bio with bi_end_io set to non-NULL other than end_sync_read is safe to write to. As the device is now faulty it doesn't make sense to write. As the bio was recently used for a read, it is "dirty" and not suitable for immediate submission. In particular, ->bi_next might be non-NULL, which will cause generic_make_request() to complain. Break this interaction by refusing to write to devices which are marked as Faulty. Reported-and-tested-by:
Michael Wang <yun.wang@profitbricks.com> Fixes: 2e52d449 ("md/raid1: add failfast handling for reads.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 07a77929 upstream. The author meant to free the variable that was just allocated, instead of the one that failed to be allocated, but made a simple typo. This patch rectifies that. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Björn Jacke authored
commit 85435d7a upstream. SFM is mapping doublequote to 0xF020 Without this patch creating files with doublequote fails to Windows/Mac Signed-off-by:
Bjoern Jacke <bjacke@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Björn Jacke authored
commit b704e70b upstream. - trailing space maps to 0xF028 - trailing period maps to 0xF029 This fix corrects the mapping of file names which have a trailing character that would otherwise be illegal (period or space) but is allowed by POSIX. Signed-off-by:
-
Steve French authored
commit 7db0a6ef upstream. Macs send the maximum buffer size in response on ioctl to validate negotiate security information, which causes us to fail the mount as the response buffer is larger than the expected response. Changed ioctl response processing to allow for padding of validate negotiate ioctl response and limit the maximum response size to maximum buffer size. Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Steve French authored
commit 26c9cb66 upstream. Mac requires the unicode flag to be set for cifs, even for the smb echo request (which doesn't have strings). Without this Mac rejects the periodic echo requests (when mounting with cifs) that we use to check if server is down Signed-off-by:
-
Andrey Ryabinin authored
commit a5f6a6a9 upstream. invalidate_bdev() calls cleancache_invalidate_inode() iff ->nrpages != 0 which doen't make any sense. Make sure that invalidate_bdev() always calls cleancache_invalidate_inode() regardless of mapping->nrpages value. Fixes: c515e1fd ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-3-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Luis Henriques authored
commit eeca958d upstream. The ceph_inode_xattr needs to be released when removing an xattr. Easily reproducible running the 'generic/020' test from xfstests or simply by doing: attr -s attr0 -V 0 /mnt/test && attr -r attr0 /mnt/test While there, also fix the error path. Here's the kmemleak splat: unreferenced object 0xffff88001f86fbc0 (size 64): comm "attr", pid 244, jiffies 4294904246 (age 98.464s) hex dump (first 32 bytes): 40 fa 86 1f 00 88 ff ff 80 32 38 1f 00 88 ff ff @........28..... 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ backtrace: [<ffffffff81560199>] kmemleak_alloc+0x49/0xa0 [<ffffffff810f3e5b>] kmem_cache_alloc+0x9b/0xf0 [<ffffffff812b157e>] __ceph_setxattr+0x17e/0x820 [<ffffffff812b1c57>] ceph_set_xattr_handler+0x37/0x40 [<ffffffff8111fb4b>] __vfs_removexattr+0x4b/0x60 [<ffffffff8111fd37>] vfs_removexattr+0x77/0xd0 [<ffffffff8111fdd1>] removexattr+0x41/0x60 [<ffffffff8111fe65>] path_removexattr+0x75/0xa0 [<ffffffff81120aeb>] SyS_lremovexattr+0xb/0x10 [<ffffffff81564b20>] entry_SYSCALL_64_fastpath+0x13/0x94 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Michal Hocko authored
commit 81be3dee upstream. getxattr uses vmalloc to allocate memory if kzalloc fails. This is filled by vfs_getxattr and then copied to the userspace. vmalloc, however, doesn't zero out the memory so if the specific implementation of the xattr handler is sloppy we can theoretically expose a kernel memory. There is no real sign this is really the case but let's make sure this will not happen and use vzalloc instead. Fixes: 779302e6 ("fs/xattr.c:getxattr(): improve handling of allocation failures") Link: http://lkml.kernel.org/r/20170306103327.2766-1-mhocko@kernel.orgAcked-by:
Kees Cook <keescook@chromium.org> Reported-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Jack Morgenstein authored
commit 99e68909 upstream. In mlx4_ib_add, procedure mlx4_ib_alloc_eqs is called to allocate EQs. However, in the mlx4_ib_add error flow, procedure mlx4_ib_free_eqs is not called to free the allocated EQs. Fixes: e605b743 ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Shamir Rabinovitch authored
commit 771a5258 upstream. When udev renames the netdev devices, ipoib debugfs entries does not get renamed. As a result, if subsequent probe of ipoib device reuse the name then creating a debugfs entry for the new device would fail. Also, moved ipoib_create_debug_files and ipoib_delete_debug_files as part of ipoib event handling in order to avoid any race condition between these. Fixes: 1732b0ef ([IPoIB] add path record information in debugfs) Signed-off-by:
Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Somasundaram Krishnasamy authored
commit 117aceb0 upstream. When committing era metadata to disk, it doesn't always save the latest spacemap metadata root in superblock. Due to this, metadata is getting corrupted sometimes when reopening the device. The correct order of update should be, pre-commit (shadows spacemap root), save the spacemap root (newly shadowed block) to in-core superblock and then the final commit. Signed-off-by:
Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Richard Weinberger authored
commit 9abc74a2 upstream. This is broken since ever but sadly nobody noticed. Recent versions of GDB set DR_CONTROL unconditionally and UML dies due to a heap corruption. It turns out that the PTRACE_POKEUSER was copy&pasted from i386 and assumes that addresses are 4 bytes long. Fix that by using 8 as address size in the calculation. Reported-by:
jie cao <cj3054@gmail.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Ashish Kalra authored
commit d594aa02 upstream. The minimum size for a new stack (512 bytes) setup for arch/x86/boot components when the bootloader does not setup/provide a stack for the early boot components is not "enough". The setup code executing as part of early kernel startup code, uses the stack beyond 512 bytes and accidentally overwrites and corrupts part of the BSS section. This is exposed mostly in the early video setup code, where it was corrupting BSS variables like force_x, force_y, which in-turn affected kernel parameters such as screen_info (screen_info.orig_video_cols) and later caused an exception/panic in console_init(). Most recent boot loaders setup the stack for early boot components, so this stack overwriting into BSS section issue has not been exposed. Signed-off-by:
Ashish Kalra <ashish@bluestacks.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170419152015.10011-1-ashishkalra@Ashishs-MacBook-Pro.localSigned-off-by:
-
Maksim Salau authored
commit 942a4873 upstream. Allocate buffers on HEAP instead of STACK for local structures that are to be received using usb_control_msg(). Signed-off-by:
Maksim Salau <maksim.salau@gmail.com> Tested-by: Alfredo Rafael Vicente Boix <alviboi@gmail.com>; Signed-off-by:
-
Guenter Roeck authored
commit f5cccf49 upstream. While running a bind/unbind stress test with the dwc3 usb driver on rk3399, the following crash was observed. Unable to handle kernel NULL pointer dereference at virtual address 00000218 pgd = ffffffc00165f000 [00000218] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507 Hardware name: Google Kevin (DT) Workqueue: pm pm_runtime_work task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000 PC is at autosuspend_check+0x74/0x174 LR is at autosuspend_check+0x70/0x174 ... Call trace: [<ffffffc00080dcc0>] autosuspend_check+0x74/0x174 [<ffffffc000810500>] usb_runtime_idle+0x20/0x40 [<ffffffc000785ae0>] __rpm_callback+0x48/0x7c [<ffffffc000786af0>] rpm_idle+0x1e8/0x498 [<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Source: (gdb) l *0xffffffc00080dcc0 0xffffffc00080dcc0 is in autosuspend_check (drivers/usb/core/driver.c:1778). 1773 /* We don't need to check interfaces that are 1774 * disabled for runtime PM. Either they are unbound 1775 * or else their drivers don't support autosuspend 1776 * and so they are permanently active. 1777 */ 1778 if (intf->dev.power.disable_depth) 1779 continue; 1780 if (atomic_read(&intf->dev.power.usage_count) > 0) 1781 return -EBUSY; 1782 w |= intf->needs_remote_wakeup; Code analysis shows that intf is set to NULL in usb_disable_device() prior to setting actconfig to NULL. At the same time, usb_runtime_idle() does not lock the usb device, and neither does any of the functions in the traceback. This means that there is no protection against a race condition where usb_disable_device() is removing dev->actconfig->interface[] pointers while those are being accessed from autosuspend_check(). To solve the problem, synchronize and validate device state between autosuspend_check() and usb_disconnect(). Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 2c930e3d upstream. Add missing continue in switch. Addresses-Coverity-ID: 1248733 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by:
-
Ian Abbott authored
commit 8ec04a49 upstream. The timer expiry routine `jr3_pci_poll_dev()` checks for expiry by checking whether the absolute value of `jiffies` (stored in local variable `now`) is greater than the expected expiry time in jiffy units. This will fail when `jiffies` wraps around. Also, it seems to make sense to handle the expiry one jiffy earlier than the current test. Use `time_after_eq()` to check for expiry. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
commit 45292be0 upstream. For some reason, the driver does not consider allocation of the subdevice private data to be a fatal error when attaching the COMEDI device. It tests the subdevice private data pointer for validity at certain points, but omits some crucial tests. In particular, `jr3_pci_auto_attach()` calls `jr3_pci_alloc_spriv()` to allocate and initialize the subdevice private data, but the same function subsequently dereferences the pointer to access the `next_time_min` and `next_time_max` members without checking it first. The other missing test is in the timer expiry routine `jr3_pci_poll_dev()`, but it will crash before it gets that far. Fix the bug by returning `-ENOMEM` from `jr3_pci_auto_attach()` as soon as one of the calls to `jr3_pci_alloc_spriv()` returns `NULL`. The COMEDI core will subsequently call `jr3_pci_detach()` to clean up. Signed-off-by:
-
Johan Hovold authored
commit b58f45c8 upstream. Make sure to deregister the USB driver before releasing the tty driver to avoid use-after-free in the USB disconnect callback where the tty devices are deregistered. Fixes: 61e12104 ("staging: gdm7240: adding LTE USB driver") Cc: Won Kang <wkang77@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit 12ecd24e upstream. Since 4.9 mandated USB buffers be heap allocated this causes the driver to fail. Since there is a wide range of buffer sizes use kmemdup to create allocated buffer. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit 05c0cf88 upstream. Since 4.9 mandated USB buffers to be heap allocated. This causes the driver to fail. Create buffer for USB transfers. Signed-off-by:
-
Ajay Kaher authored
USB: Proper handling of Race Condition when two USB class drivers try to call init_usb_class simultaneously commit 2f86a96b upstream. There is race condition when two USB class drivers try to call init_usb_class at the same time and leads to crash. code path: probe->usb_register_dev->init_usb_class To solve this, mutex locking has been added in init_usb_class() and destroy_usb_class(). As pointed by Alan, removed "if (usb_class)" test from destroy_usb_class() because usb_class can never be NULL there. Signed-off-by:
Ajay Kaher <ajay.kaher@samsung.com> Acked-by:
-
Marek Vasut authored
commit 31c5d192 upstream. This development kit has an FT4232 on it with a custom USB VID/PID. The FT4232 provides four UARTs, but only two are used. The UART 0 is used by the FlashPro5 programmer and UART 2 is connected to the SmartFusion2 CortexM3 SoC UART port. Note that the USB VID is registered to Actel according to Linux USB VID database, but that was acquired by Microsemi. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Peter Chen authored
commit 6fc091fb upstream. Print correct command ring address using 'val_64'. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Bart Van Assche authored
commit 59ac9c07 upstream. This patch fixes zero-length READ and WRITE handling in target/FILEIO, which was broken a long time back by: Since: commit d81cb447 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Sep 17 16:36:11 2012 -0700 target: go through normal processing for all zero-length commands which moved zero-length READ and WRITE completion out of target-core, to doing submission into backend driver code. To address this, go ahead and invoke target_complete_cmd() for any non negative return value in fd_do_rw(). Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
- 15 May, 2017 7 commits
-
-
Greg Kroah-Hartman authored
-
Ard Biesheuvel authored
commit 5008efc8 upstream. The PJ4 inline asm sequence to write to cp15 cannot be built in Thumb-2 mode, due to the way it performs arithmetic on the program counter, so it is built in ARM mode instead. However, building C files in ARM mode under CONFIG_THUMB2_KERNEL is problematic, since the instrumentation performed by subsystems like ftrace does not expect having to deal with interworking branches. Since the sequence in question is simply a poor man's ISB instruction, let's use a straight 'isb' instead when building in Thumb2 mode. Thumb2 implies V7, so 'isb' should always be supported in that case. Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Nicolai Hähnle authored
commit 3089c1df upstream. The vm fault handler relies on the fact that the VMA owns a reference to the BO. However, once mmap_sem is released, other tasks are free to destroy the VMA, which can lead to the BO being freed. Fix two code paths where that can happen, both related to vm fault retries. Found via a lock debugging warning which flagged &bo->wu_mutex as locked while being destroyed. Fixes: cbe12e74 ("drm/ttm: Allow vm fault retries") Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jin Qian authored
commit b9dd4618 upstream. F2FS uses 4 bytes to represent block address. As a result, supported size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments. Signed-off-by:
Jin Qian <jinqian@google.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a9f11f96 ] Be careful when comparing tcp_time_stamp to some u32 quantity, otherwise result can be surprising. Fixes: 7c106d7e ("[TCP]: TCP Low Priority congestion control") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 242d3a49 ] For each netns (except init_net), we initialize its null entry in 3 places: 1) The template itself, as we use kmemdup() 2) Code around dst_init_metrics() in ip6_route_net_init() 3) ip6_route_dev_notify(), which is supposed to initialize it after loopback registers Unfortunately the last one still happens in a wrong order because we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to net->loopback_dev's idev, thus we have to do that after we add idev to loopback. However, this notifier has priority == 0 same as ipv6_dev_notf, and ipv6_dev_notf is registered after ip6_route_dev_notifier so it is called actually after ip6_route_dev_notifier. This is similar to commit 2f460933 ("ipv6: initialize route null entry in addrconf_init()") which fixes init_net. Fix it by picking a smaller priority for ip6_route_dev_notifier. Also, we have to release the refcnt accordingly when unregistering loopback_dev because device exit functions are called before subsys exit functions. Acked-by:
David Ahern <dsahern@gmail.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 2f460933 ] Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev since it is always NULL. This is clearly wrong, we have code to initialize it to loopback_dev, unfortunately the order is still not correct. loopback_dev is registered very early during boot, we lose a chance to re-initialize it in notifier. addrconf_init() is called after ip6_route_init(), which means we have no chance to correct it. Fix it by moving this initialization explicitly after ipv6_add_dev(init_net.loopback_dev) in addrconf_init(). Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
