Introduce a simple allocator for the NUMA remap space.  This space is very
scarce, used for structures which are best allocated node local.

This mechanism is also used on non-NUMA ia64 systems with a vmem_map to keep
the pgdat->node_mem_map initialized in a consistent place for all
architectures.

Issues:
o alloc_remap takes a node_id where we might expect a pgdat which was intended
  to allow us to allocate the pgdat's using this mechanism; which we do not yet
  do.  Could have alloc_remap_node() and alloc_remap_nid() for this purpose.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The following four patches provide the last needed changes before the
introduction of sparsemem.  For a more complete description of what this
will do, please see this patch:

http://www.sr71.net/patches/2.6.11/2.6.11-bk7-mhp1/broken-out/B-sparse-150-sparsemem.patch

or previous posts on the subject:
http://marc.theaimsgroup.com/?t=110868540700001&r=1&w=2
http://marc.theaimsgroup.com/?l=linux-mm&m=109897373315016&w=2

Three of these are i386-only, but one of them reorganizes the macros
used to manage the space in page->flags, and will affect all platforms.
There are analogous patches to the i386 ones for ppc64, ia64, and
x86_64, but those will be submitted by the normal arch maintainers.

The combination of the four patches has been test-booted on a variety of
i386 hardware, and compiled for ppc64, i386, and x86-64 with about 17
different .configs.  It's also been runtime-tested on ia64 configs (with
more patches on top).

This patch:

We _know_ which node pages in general belong to, at least at a very gross
level in node_{start,end}_pfn[].  Use those to target the allocations of
pages.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch effectively eliminates direct use of pgdat->node_mem_map outside
of the DISCONTIG code.  On a flat memory system, these fields aren't
currently used, neither are they on a sparsemem system.

There was also a node_mem_map(nid) macro on many architectures.  Its use
along with the use of ->node_mem_map itself was not consistent.  It has
been removed in favor of two new, more explicit, arch-independent macros:

	pgdat_page_nr(pgdat, pagenr)
	nid_page_nr(nid, pagenr)

I called them "pgdat" and "nid" because we overload the term "node" to mean
"NUMA node", "DISCONTIG node" or "pg_data_t" in very confusing ways.  I
believe the newer names are much clearer.

These macros can be overridden in the sparsemem case with a theoretically
slower operation using node_start_pfn and pfn_to_page(), instead.  We could
make this the only behavior if people want, but I don't want to change too
much at once.  One thing at a time.

This patch removes more code than it adds.

Compile tested on alpha, alpha discontig, arm, arm-discontig, i386, i386
generic, NUMAQ, Summit, ppc64, ppc64 discontig, and x86_64.  Full list
here: http://sr71.net/patches/2.6.12/2.6.12-rc1-mhp2/configs/

Boot tested on NUMAQ, x86 SMP and ppc64 power4/5 LPARs.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin J. Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes an obvious and nasty bug where we could exit the transmit
routine while holding tx_lock.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>

Don't error out if something "bad" happens when trying to bind a driver to a
device.  We want the sysfs attributes to be present for later when we try to
tear down the device.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Drivers need to return -ENODEV when they can't bind to a device.
Anything else stops the "bind a device to a driver" search.

From: Stelian Pop <stelian@popies.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Use ssleep() / msleep() [as appropriate]
instead of schedule_timeout() to guarantee the task delays as expected.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is a follow up to patch 1 regarding "Selective Sub Address
matching with call user data".  It allows use of the Fast-Select-Acceptance
optional user facility for X.25.

This patch just implements fast select with no restriction on response
(NRR).  What this means (according to ITU-T Recomendation 10/96 section
6.16) is that if in an incoming call packet, the relevant facility bits are
set for fast-select-NRR, then the called DTE can issue a direct response to
the incoming packet using a call-accepted packet that contains
call-user-data.  This patch allows such a response.  

The called DTE can also respond with a clear-request packet that contains
call-user-data.  However, this feature is currently not implemented by the
patch.

How is Fast Select Acceptance used?
By default, the system does not allow fast select acceptance (as before).
To enable a response to fast select acceptance,  
After a listen socket in created and bound as follows
	socket(AF_X25, SOCK_SEQPACKET, 0);
	bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr));
but before a listen system call is made, the following ioctl should be used.
	ioctl(call_soc,SIOCX25CALLACCPTAPPRV);
Now the listen system call can be made
	listen(call_soc, 4);
After this, an incoming-call packet will be accepted, but no call-accepted 
packet will be sent back until the following system call is made on the socket
that accepts the call
	ioctl(vc_soc,SIOCX25SENDCALLACCPT);
The network (or cisco xot router used for testing here) will allow the 
application server's call-user-data in the call-accepted packet, 
provided the call-request was made with Fast-select NRR.
Signed-off-by: Shaun Pereira <spereira@tusc.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Shaun Pereira <spereira@tusc.com.au>

This is the first (independent of the second) patch of two that I am
working on with x25 on linux (tested with xot on a cisco router).  Details
are as follows.

Current state of module:

A server using the current implementation (2.6.11.7) of the x25 module will
accept a call request/ incoming call packet at the listening x.25 address,
from all callers to that address, as long as NO call user data is present
in the packet header.

If the server needs to choose to accept a particular call request/ incoming
call packet arriving at its listening x25 address, then the kernel has to
allow a match of call user data present in the call request packet with its
own.  This is required when multiple servers listen at the same x25 address
and device interface.  The kernel currently matches ALL call user data, if
present.

Current Changes:

This patch is a follow up to the patch submitted previously by Andrew
Hendry, and allows the user to selectively control the number of octets of
call user data in the call request packet, that the kernel will match.  By
default no call user data is matched, even if call user data is present. 
To allow call user data matching, a cudmatchlength > 0 has to be passed
into the kernel after which the passed number of octets will be matched. 
Otherwise the kernel behavior is exactly as the original implementation.

This patch also ensures that as is normally the case, no call user data
will be present in the Call accepted / call connected packet sent back to
the caller 

Future Changes on next patch:

There are cases however when call user data may be present in the call
accepted packet.  According to the X.25 recommendation (ITU-T 10/96)
section 5.2.3.2 call user data may be present in the call accepted packet
provided the fast select facility is used.  My next patch will include this
fast select utility and the ability to send up to 128 octets call user data
in the call accepted packet provided the fast select facility is used.  I
am currently testing this, again with xot on linux and cisco.  
Signed-off-by: Shaun Pereira <spereira@tusc.com.au>

(With a fix from Alexey Dobriyan <adobriyan@gmail.com>)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: jlamanna@gmail.com

ebtables.c vfree() checking cleanups.

Signed-off by: James Lamanna <jlamanna@gmail.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Nishanth Aravamudan <nacc@us.ibm.com>

Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. The current code is not wrong, but it does not account for
early return due to signals, so I think msleep() should be appropriate.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off by: Chuck Short <zulcss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch provides support for registering multiple netpoll clients to the
same network device.  Only one of these clients may register an rx_hook,
however.  In practice, this restriction has not been problematic.  It is
worth mentioning, though, that the current design can be easily extended to
allow for the registration of multiple rx_hooks.

The basic idea of the patch is that the rx_np pointer in the netpoll_info
structure points to the struct netpoll that has rx_hook filled in.  Aside
from this one case, there is no need for a pointer from the struct
net_device to an individual struct netpoll.

A lock is introduced to protect the setting and clearing of the np_rx
pointer.  The pointer will only be cleared upon netpoll client module
removal, and the lock should be uncontested.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduces a netpoll_info structure, which the struct net_device
will now point to instead of pointing to a struct netpoll.  The reason for
this is two-fold: 1) fields such as the rx_flags, poll_owner, and poll_lock
should be maintained per net_device, not per netpoll;  and 2) this is a first
step in providing support for multiple netpoll clients to register against the
same net_device.

The struct netpoll is now pointed to by the netpoll_info structure.  As
such, the previous behaviour of the code is preserved.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This trivial patch moves the assignment of poll_owner to -1 inside of
the lock.  This fixes a potential SMP race in the code.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The boot_pageset needs to be preserved for hotplugging and for off line
processors and nodes. Otherwise pointers will point into memory that has
now a different use. /proc/zoneinfo is currently showing strange results
if processors / nodes are not present.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Small patch to save an unecessary call to strlen() : sprintf() gave us
the length, just trust it.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since meminfo.bank[] array contains page-aligned start/size, we
no longer need to explicitly round up/down the addresses when
converting to PFNs.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Ensure that meminfo.bank[] array contains page-aligned start/size
information.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

After using this facility for a while to test my changes to the
cipher crypt() layer, I realised that I should've listend to Dave
and made this thing use CPU cycle counters :) As it is it's too
jittery for me to feel safe about relying on the results.

So here is a patch to make it use CPU cycles by default but fall
back to jiffies if the user specifies a non-zero sec value.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing keys used in the speed tests do not pass the 3DES quality check.
This patch makes it use the template keys instead.

Other algorithms can supply template keys through the same interface if needed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Reyk Floeter <reyk@vantronix.net>

I recently had the requirement to do some benchmarking on cryptoapi, and
I found reyk's very useful performance test patch [1].

However, I could not find any discussion on why that extension (or
something providing a similar feature but different implementation) was
not merged into mainline.  If there was such a discussion, can someone
please point me to the archive[s]?

I've now merged the old patch into 2.6.12-rc1, the result can be found
attached to this email.

[1] http://lists.logix.cz/pipermail/padlock/2004/000010.htmlSigned-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

It seems that bad code tends to get copied (see test_cipher_speed).  So let's
kill this idiom before it spreads any further.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert dmabounce.c to use list_for_each_entry() instead of
list_for_each() + list_entry().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Adding support for MPC8548 w/o PCI support, broke building MPC8555 CDS
by trying to remove a loop variable that was used when PCI is enabled.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org)

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 This shows up on running tar over NFSv4.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 Request RDATTR_ERROR as an attribute in readdir to distinguish between a
 directory being within an absent filesystem or one (or more) of its entries.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 Ensure that lock owner structures are not released prematurely.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 If the lock blocks, the server may send us a GRANTED message that
 races with the reply to our LOCK request. Make sure that we catch
 the GRANTED by queueing up our request on the nlm_blocked list
 before we send off the first LOCK rpc call.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 Basically copies the VFS's method for tracking writebacks and applies
 it to the struct nfs_page.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>