upcall is dereferenced even when genlmsg_put fails. The fix
goto out to avoid the NULL pointer dereference in this case.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Same reasons than the ones explained in commit 4179cb5a
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")

netif_rx_ni() or napi_gro_frags() must be called under a strict contract.

At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.

A similar protocol is used for gro layer.

Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP

Virtual drivers do not have this guarantee, and must
therefore make the check themselves.

Fixes: 1bd4978a ("tun: honor IFF_UP in tun_get_user()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an interrupt is already pending when the interrupt is enabled on the
GXL phy, no IRQ will ever be triggered.

The fix is simply to make sure pending IRQs are cleared before setting
up the irq mask.

Fixes: cf127ff2 ("net: phy: meson-gxl: add interrupt support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds missing sphinx documentation to the
socket.c's functions. Also fixes some whitespaces.

I also changed the style of older documentation as an
effort to have an uniform documentation style.
Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case create_singlethread_workqueue fails, the check returns
an error to callers to avoid potential NULL pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several statements that contain extra spacing in
the indentation; clean this up by removing spaces. Also
add { } braces on if statement to keep to kernel coding
style.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a statement that is indented incorrectly; replace
spaces with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We initially interpreted the fwmark parameter as a flag that simply turned
on the feature, using the whole skb->mark field as the index into the CAKE
tin_order array. However, it is quite common for different applications to
use different parts of the mask field for their own purposes, each using a
different mask.

Support this use of subsets of the mark by interpreting the TCA_CAKE_FWMARK
parameter as a bitmask to apply to the fwmark field when reading it. The
result will be right-shifted by the number of unset lower bits of the mask
before looking up the tin.

In the original commit message we also failed to credit Felix Resch with
originally suggesting the fwmark feature back in 2017; so the Suggested-By
in this commit covers the whole fwmark feature.

Fixes: 0b5c7efd ("sch_cake: Permit use of connmarks as tin classifiers")
Suggested-by: Felix Resch <fuller@beif.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_alloc_skb can fail and return a NULL pointer which is
dereferenced without a check. The patch avoids such a scenario.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sending non-linear skbs with jumbo frames, we set up the non-paged
data and mark that as a last segment, although the paged fragments are
also prepared. This will stall the TX queue and trigger a watchdog warning
(a simple reproducer is to run an iperf client mode TCP test with a large
MTU - networking fails instantly).

Fix by checking if the skb is non-linear.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0e80bdc9 ("stmmac: first frame prep at the end of xmit
routine") overlooked jumbo frames when re-ordering the code, and as a
result the own bit was not getting set anymore for the first jumbo frame
descriptor. Commit 487e2e22 ("net: stmmac: Set OWN bit for jumbo
frames") tried to fix this, but now the bit is getting set too early and
the DMA may start while we are still setting up the remaining descriptors.
And with the chain mode the own bit remains still unset.

Fix by setting the own bit at the end of xmit also with jumbo frames.

Fixes: 0e80bdc9 ("stmmac: first frame prep at the end of xmit routine")
Fixes: 487e2e22 ("net: stmmac: Set OWN bit for jumbo frames")
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

register_snap_client may return NULL, all the callers
check it, but only print a warning. This will result in
NULL pointer dereference in unregister_snap_client and other
places.

It has always been used like this since v2.6
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc patches from Andrew Morton:

- a little bit more MM

- a few fixups

[ The "little bit more MM" is actually just one of the three patches
  Andrew sent for mm/filemap.c, I'm still mulling over two more of them
  from Josef Bacik     - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  include/linux/swap.h: use offsetof() instead of custom __swapoffset macro
  tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind
  zram: default to lzo-rle instead of lzo
  filemap: pass vm_fault to the mmap ra helpers

Use offsetof() to calculate offset of a field to take advantage of
compiler built-in version when possible, and avoid UBSAN warning when
compiling with Clang:

  UBSAN: Undefined behaviour in mm/swapfile.c:3010:38
  member access within null pointer of type 'union swap_header'
  CPU: 6 PID: 1833 Comm: swapon Tainted: G S                4.19.23 #43
  Call trace:
   dump_backtrace+0x0/0x194
   show_stack+0x20/0x2c
   __dump_stack+0x20/0x28
   dump_stack+0x70/0x94
   ubsan_epilogue+0x14/0x44
   ubsan_type_mismatch_common+0xf4/0xfc
   __ubsan_handle_type_mismatch_v1+0x34/0x54
   __se_sys_swapon+0x654/0x1084
   __arm64_sys_swapon+0x1c/0x24
   el0_svc_common+0xa8/0x150
   el0_svc_compat_handler+0x2c/0x38
   el0_svc_compat+0x8/0x18

Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.orgSigned-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

: selftests: proc: proc-pid-vm
: ========================================
: proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed.
: Aborted

Because the vsyscall mapping is enabled.  Read from vsyscall page to tell
if vsyscall is being used.

Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2
Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian
Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lzo-rle gives higher performance and similar compression ratios to lzo.

Link: http://lkml.kernel.org/r/20190205155944.16007-4-dave.rodgman@arm.comSigned-off-by: Dave Rodgman <dave.rodgman@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All of the arguments to these functions come from the vmf.

Cut down on the amount of arguments passed by simply passing in the vmf
to these two helpers.

Link: http://lkml.kernel.org/r/20181211173801.29535-3-josef@toxicpanda.comSigned-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more ACPI updates from Rafael Wysocki:
 "These fix a couple of issues and do some cleanups on top of the
  previous ACPI changes for 5.1-rc1.

  Specifics:

   - Fix a crash caused by unloading an SSDT overlay (Andy Shevchenko)

   - Prevent user space from getting confusing error values on failing
     ACPI sysfs accesses (Rafael Wysocki)

   - Simplify leaf node detection in the PPTT parsing code by using a
     new flag defined in ACPI 6.3 (Jeremy Linton)

   - Add missing "static" in some places in the ACPI configfs code (Andy
     Shevchenko)

   - Fix acpidbg tool path in the ACPI documentation (Flavio Suligoi)"

* tag 'acpi-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sysfs: Prevent get_status() from returning acpi_status
  ACPI / device_sysfs: Avoid OF modalias creation for removed device
  ACPI / configfs: Mark local data structures static
  ACPI / configfs: Mark local functions static
  ACPI: tables: Simplify PPTT leaf node detection
  ACPI: Documentation: Fix path for acpidbg tool

Pull more power management updates from Rafael Wysocki:
 "These are mostly fixes and cleanups on top of the previously merged
  power management material for 5.1-rc1 with one cpupower utility update
  that wasn't pushed earlier due to unfortunate timing.

  Specifics:

   - Fix registration of new cpuidle governors partially broken during
     the 5.0 development cycle by mistake (Rafael Wysocki).

   - Avoid integer overflows in the menu cpuidle governor by making it
     discard the overflowing data points upfront (Rafael Wysocki).

   - Fix minor mistake in the recent update of the iowait boost
     computation in the intel_pstate driver (Rafael Wysocki).

   - Drop incorrect __init annotation from one function in the pxa2xx
     cpufreq driver (Arnd Bergmann).

   - Fix the operating performance points (OPP) framework initialization
     for devices in multiple power domains if only one of them is
     scalable (Rajendra Nayak).

   - Fix mistake in dev_pm_opp_set_rate() which causes it to skip
     updating the performance state if the new frequency is the same as
     the old one (Viresh Kumar).

   - Rework the cancellation of wakeup source timers to avoid potential
     issues with it and do some cleanups unlocked by that change (Viresh
     Kumar, Rafael Wysocki).

   - Clean up the code computing the active/suspended time of devices in
     the PM-runtime framework after recent changes (Ulf Hansson).

   - Make the power management infrastructure code use pr_fmt()
     consistently (Joe Perches).

   - Clean up the generic power domains (genpd) framework somewhat
     (Aisheng Dong).

   - Improve kerneldoc comments for two functions in the cpufreq core
     (Rafael Wysocki).

   - Fix typo in a PM QoS file description comment (Aisheng Dong).

   - Update the handling of CPU boost frequencies in the cpupower
     utility (Abhishek Goel)"

* tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: governor: Add new governors to cpuidle_governors again
  cpufreq: intel_pstate: Fix up iowait_boost computation
  PM / OPP: Update performance state when freq == old_freq
  PM / wakeup: Drop wakeup_source_drop()
  PM / wakeup: Rework wakeup source timer cancellation
  PM / domains: Remove one unnecessary blank line
  PM / Domains: Return early for all errors in _genpd_power_off()
  PM / Domains: Improve warn for multiple states but no governor
  OPP: Fix handling of multiple power domains
  PM / QoS: Fix typo in file description
  cpufreq: pxa2xx: remove incorrect __init annotation
  PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
  PM-runtime: Consolidate code to get active/suspended time
  PM: Add and use pr_fmt()
  cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()
  cpuidle: menu: Avoid overflows when computing variance
  tools/power/cpupower: Display boost frequency separately

Pull Microblaze update from Michal Simek:
 "Simplify debugfs initialization"

* tag 'microblaze-v5.1-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: no need to check return value of debugfs_create functions

Pull networking fixes from David Miller:
 "More fixes in the queue:

  1) Netfilter nat can erroneously register the device notifier twice,
     fix from Florian Westphal.

  2) Use after free in nf_tables, from Pablo Neira Ayuso.

  3) Parallel update of steering rule fix in mlx5 river, from Eli
     Britstein.

  4) RX processing panic in lan743x, fix from Bryan Whitehead.

  5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch.

  6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein.

  7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing
     modes, from Bryan Whitehead.

  8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  pptp: dst_release sk_dst_cache in pptp_sock_destruct
  MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list
  l2tp: fix infoleak in l2tp_ip6_recvmsg()
  net/tls: Inform user space about send buffer availability
  net_sched: return correct value for *notify* functions
  lan743x: Fix TX Stall Issue
  net/mlx4_core: Fix qp mtt size calculation
  net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling
  net/mlx4_core: Fix reset flow when in command polling mode
  mlxsw: minimal: Initialize base_mac
  mlxsw: core: Prevent duplication during QSFP module initialization
  net: dwmac-sun8i: fix a missing check of of_get_phy_mode
  net: sh_eth: fix a missing check of of_get_phy_mode
  net: 8390: fix potential NULL pointer dereferences
  net: fujitsu: fix a potential NULL pointer dereference
  net: qlogic: fix a potential NULL pointer dereference
  isdn: hfcpci: fix potential NULL pointer dereference
  Documentation: devicetree: add a new optional property for port mac address
  net: rocker: fix a potential NULL pointer dereference
  net: qlge: fix a potential NULL pointer dereference
  ...

Pull dmaengine updates from Vinod Koul:

 - dmatest updates for modularizing common struct and code

 - remove SG support for VDMA xilinx IP and updates to driver

 - Update to dw driver to support Intel iDMA controllers multi-block
   support

 - tegra updates for proper reporting of residue

 - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4

 - struct_size() usage and useless LIST_HEAD cleanups in subsystem.

 - qDMA controller driver for Layerscape SoCs

 - stm32-dma PM Runtime support

 - And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
   bcm2835, qcom_hidma etc

* tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits)
  dmaengine: imx-sdma: fix consistent dma test failures
  dmaengine: imx-sdma: add a test for imx8mq multi sdma devices
  dmaengine: imx-sdma: add clock ratio 1:1 check
  dmaengine: dmatest: move test data alloc & free into functions
  dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func()
  dmaengine: dmatest: wrap src & dst data into a struct
  dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4
  dmaengine: ioatdma: add descriptor pre-fetch support for v3.4
  dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4
  dmaengine: ioatdma: Add Snow Ridge ioatdma device id
  dmaengine: sprd: Change channel id to slave id for DMA cell specifier
  dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
  dmaengine: mv_xor: Use correct device for DMA API
  Documentation :dmaengine: clarify DMA desc. pointer after submission
  Documentation: dmaengine: fix dmatest.rst warning
  dmaengine: k3dma: Add support for dma-channel-mask
  dmaengine: k3dma: Delete axi_config
  dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
  Documentation: bindings: dma: Add binding for dma-channel-mask
  Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This contains the last patches in Loic's remoteproc resource table
  handling changes, a number of updates to documentation, support for
  invoking the crash handler (for testing purposes), a fix for the
  handling of virtio devices during recovery, performance state votes in
  Qualcomm modem driver, support for specifying board specific firmware
  path for Qualcomm modem driver and improved support for graceful
  shutdown of Qualcomm remoteprocs"

* tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits)
  remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag"
  remoteproc: fix rproc_check_carveout_da() returned error and comments
  remoteproc: fix trace buffer va initialization
  remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain
  remoteproc: add warning on resource table cast
  remoteproc: fix rproc_alloc_carveout() bad variable cast
  remoteproc: fix rproc_da_to_va in case of unallocated carveout
  remoteproc: correct rproc_mem_entry_init() comments
  remoteproc: fix recovery procedure
  rpmsg: virtio: change header file sort style
  rpmsg: virtio: allocate buffer from parent
  remoteproc: st: add reserved memory support
  remoteproc: create vdev subdevice with specific dma memory pool
  remoteproc: q6v5_adsp: Remove voting for lpass_aon clock
  dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list
  remoteproc: q6v5-mss: Active powerdomain for SDM845
  remoteproc: q6v5-mss: Vote for rpmh power domains
  remoteproc: qcom: Add support for parsing fw dt bindings
  remoteproc: qcom_q6v5: don't auto boot remote processor
  remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown
  ...

Pull clk subsystem updates from Stephen Boyd:
 "We have a fairly balanced mix of clk driver updates and clk framework
  updates this time around. It's the usual pile of new drivers for new
  hardware out there and the normal small fixes and updates, but then we
  have some core framework changes too.

  In the core framework, we introduce support for a clk_get_optional()
  API to get clks that may not always be populated and a way to devm
  manage clkdev lookups registered by provider drivers. We also do some
  refactoring to simplify the interface between clkdev and the common
  clk framework so we can reuse the DT parsing and clk_get() path in
  provider drivers in the future. This work will continue in the next
  few cycles while we convert how providers specify clk parents.

  On the driver side, the biggest part of the dirstat is the Amlogic clk
  driver that got support for the G12A SoC. It dominates with almost
  half the overall diff, while the second largest part of the diff is in
  the i.MX clk driver that gained support for imx8mm SoCs. After that,
  we have the Actions Semiconductor and Qualcomm drivers rounding out
  the big part of the dirstat because they both got new hardware support
  for SoCs. The rest is just various updates and non-critical fixes for
  existing drivers.

  Core:
   - Convert a few clk bindings to JSON schema format
   - Add a {devm_}clk_get_optional() API
   - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
   - Start rewriting clk parent registration and supporting device links
     by moving around code that supports clk_get() and DT parsing of the
     'clocks' property

  New Drivers:
   - Add Qualcomm MSM8998 RPM managed clks
   - IPA clk support on Qualcomm RPMh clk controllers
   - Actions Semi S500 SoC clk support
   - Support for fixed rate clks populated from an MMIO register
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
   - Add TMU (timer) clocks on Renesas RZ/G2E
   - Add Amlogic G12A Always-On Clock Controller
   - Add 32k clock generation for Amlogic AXG
   - Add support for the Mali GPU clocks on Amlogic Meson8
   - Add Amlogic G12A EE clock controller driver
   - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
   - Add i.MX8MM SoC clk driver support

  Removed Drivers:
   - Remove clps711x driver as the board support is gone

  Updates:
   - 3rd ECO fix for Mediatek MT2712 SoCs
   - Updates for Qualcomm MSM8998 GCC clks
   - Random static analysis fixes for clk drivers
   - Support for sleeping gpios in the clk-gpio type
   - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
   - Split LCDC into two clks on the Marvell MMP2 SoC
   - Various DT of_node refcount fixes
   - Get rid of CLK_IS_BASIC from TI code (yay!)
   - TI Autoidle clk support
   - Fix Amlogic Meson8 APB clock ID name
   - Claim input clocks through DT for Amlogic AXG and GXBB
   - Correct the DU (display unit) parent clock on Renesas RZ/G2E
   - Exynos5433 IMEM CMU crypto clk support (SlimSS)
   - Fix for the PLL-MIPI on the Allwinner A23
   - Fix Rockchip rk3328 PLL rate calculation
   - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
   - i.MX SCU clk driver clk_set_parent() and cpufreq support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
  clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
  clk: fixup default index for of_clk_get_by_name()
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
  clk: imx8mq: add GPIO clocks to clock tree
  clk: mediatek: correct cpu clock name for MT8173 SoC
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
  clk: ingenic: Remove set but not used variable 'enable'
  clk: at91: programmable: remove unneeded register read
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2
  ...

* acpi-tables:
  ACPI: tables: Simplify PPTT leaf node detection

* acpi-debug:
  ACPI: sysfs: Prevent get_status() from returning acpi_status

* acpi-doc:
  ACPI: Documentation: Fix path for acpidbg tool

* acpi-misc:
  ACPI / configfs: Mark local data structures static
  ACPI / configfs: Mark local functions static

* pm-opp:
  PM / OPP: Update performance state when freq == old_freq
  OPP: Fix handling of multiple power domains

* pm-tools:
  tools/power/cpupower: Display boost frequency separately

* pm-domains:
  PM / domains: Remove one unnecessary blank line
  PM / Domains: Return early for all errors in _genpd_power_off()
  PM / Domains: Improve warn for multiple states but no governor

* pm-cpuidle:
  cpuidle: governor: Add new governors to cpuidle_governors again
  cpuidle: menu: Avoid overflows when computing variance

* pm-cpufreq:
  cpufreq: intel_pstate: Fix up iowait_boost computation
  cpufreq: pxa2xx: remove incorrect __init annotation
  cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()

* pm-core:
  PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
  PM-runtime: Consolidate code to get active/suspended time

* pm-sleep:
  PM / wakeup: Drop wakeup_source_drop()
  PM / wakeup: Rework wakeup source timer cancellation

* pm-qos:
  PM / QoS: Fix typo in file description

sk_setup_caps() is called to set sk->sk_dst_cache in pptp_connect,
so we have to dst_release(sk->sk_dst_cache) in pptp_sock_destruct,
otherwise, the dst refcnt will leak.

It can be reproduced by this syz log:

  r1 = socket$pptp(0x18, 0x1, 0x2)
  bind$pptp(r1, &(0x7f0000000100)={0x18, 0x2, {0x0, @local}}, 0x1e)
  connect$pptp(r1, &(0x7f0000000000)={0x18, 0x2, {0x3, @remote}}, 0x1e)

Consecutive dmesg warnings will occur:

  unregister_netdevice: waiting for lo to become free. Usage count = 1

v1->v2:
  - use rcu_dereference_protected() instead of rcu_dereference_check(),
    as suggested by Eric.

Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a patchwork instance behind bcm-kernel-feedback-list that is
helpful to track submissions, add this list for the Broadcom GENET and
SYSTEMPORT drivers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Back in 2013 Hannes took care of most of such leaks in commit
bceaa902 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")

But the bug in l2tp_ip6_recvmsg() has not been fixed.

syzbot report :

BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ #11
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
 kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694
 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
 copy_to_user include/linux/uaccess.h:174 [inline]
 move_addr_to_user+0x311/0x570 net/socket.c:227
 ___sys_recvmsg+0xb65/0x1310 net/socket.c:2283
 do_recvmmsg+0x646/0x10c0 net/socket.c:2390
 __sys_recvmmsg net/socket.c:2469 [inline]
 __do_sys_recvmmsg net/socket.c:2492 [inline]
 __se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485
 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x445819
Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f64453eddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006dac28 RCX: 0000000000445819
RDX: 0000000000000005 RSI: 0000000020002f80 RDI: 0000000000000003
RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac2c
R13: 00007ffeba8f87af R14: 00007f64453ee9c0 R15: 20c49ba5e353f7cf

Local variable description: ----addr@___sys_recvmsg
Variable was created at:
 ___sys_recvmsg+0xf6/0x1310 net/socket.c:2244
 do_recvmmsg+0x646/0x10c0 net/socket.c:2390

Bytes 0-31 of 32 are uninitialized
Memory access of size 32 starts at ffff8880ae62fbb0
Data copied to user address 0000000020000000

Fixes: a32e0eec ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A previous fix ("tls: Fix write space handling") assumed that
user space application gets informed about the socket send buffer
availability when tls_push_sg() gets called. Inside tls_push_sg(), in
case do_tcp_sendpages() returns 0, the function returns without calling
ctx->sk_write_space. Further, the new function tls_sw_write_space()
did not invoke ctx->sk_write_space. This leads to situation that user
space application encounters a lockup always waiting for socket send
buffer to become available.

Rather than call ctx->sk_write_space from tls_push_sg(), it should be
called from tls_write_space. So whenever tcp stack invokes
sk->sk_write_space after freeing socket send buffer, we always declare
the same to user space by the way of invoking ctx->sk_write_space.

Fixes: 7463d3a2 ("tls: Fix write space handling")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is confusing to directly use return value of netlink_send()/
netlink_unicast() as the return value of *notify*, as it may be not
error at all.

Example: in tc_del_tfilter(), after calling tfilter_del_notify(), it will
goto errout if (err). However, the netlink_send()/netlink_unicast() will
return positive value even for successful case. So it may not call
tcf_chain_tp_remove() and so on to clean up the resource, as a result,
resource is leaked.

It may be easier to only check the return value of tfilter_del_nofiy(),
but it is more clean to correct all related functions.
Co-developed-by: Zengmo Gao <gaozengmo@jd.com>
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It has been observed that tx queue may stall while downloading
from certain web sites (example www.speedtest.net)

The cause has been tracked down to a corner case where
the tx interrupt vector was disabled automatically, but
was not re enabled later.

The lan743x has two mechanisms to enable/disable individual
interrupts. Interrupts can be enabled/disabled by individual
source, and they can also be enabled/disabled by individual
vector which has been mapped to the source. Both must be
enabled for interrupts to work properly.

The TX code path, primarily uses the interrupt enable/disable of
the TX source bit, while leaving the vector enabled all the time.

However, while investigating this issue it was noticed that
the driver requested the use of the vector auto clear feature.

The test above revealed a case where the vector enable was
cleared unintentionally.

This patch fixes the issue by deleting the lines that request
the vector auto clear feature to be used.

Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull selinux fixes from Paul Moore:
 "Two small fixes for SELinux in v5.1: one adds a buffer length check to
  the SELinux SCTP code, the other ensures that the SELinux labeling for
  a NFS mount is not disabled if the filesystem is mounted twice"

* tag 'selinux-pr-20190312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock
  selinux: add the missing walk_size + len check in selinux_sctp_bind_connect

Merge tag 'apparmor-pr-2019-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor fixes from John Johansen:

 - fix double when failing to unpack secmark rules in policy

 - fix leak of dentry when profile is removed

* tag 'apparmor-pr-2019-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix double free when unpack of secmark rules fails
  apparmor: delete the dentry in aafs_remove() to avoid a leak
  apparmor: Fix warning about unused function apparmor_ipv6_postroute

Pull Kconfig updates from Masahiro Yamada:

 - rename lexer and parse files

 - fix 'Save as' menu of xconfig

* tag 'kconfig-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix 'Save As' menu of xconfig
  kconfig: rename zconf.y to parser.y
  kconfig: rename zconf.l to lexer.l

Merge tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The changes for this cycle are across the board.

  The bulk of it is cleanups, but there's also new device support in
  some drivers as well as more conversions to the atomic API"

* tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits)
  pwm: atmel: Remove useless symbolic definitions
  pwm: bcm-kona: Update macros to remove braces around numbers
  pwm: imx27: Only enable the clocks once in .get_state()
  pwm: rcar: Improve calculation of divider
  pwm: rcar: Remove legacy APIs
  pwm: rcar: Use "atomic" API on rcar_pwm_resume()
  pwm: rcar: Add support "atomic" API
  pwm: atmel: Add support for SAM9X60's PWM controller
  pwm: atmel: Add PWM binding for SAM9X60
  pwm: atmel: Rename objects of type atmel_pwm_data
  pwm: atmel: Add support for controllers with 32 bit counters
  pwm: atmel: Add struct atmel_pwm_data
  pwm: Add MediaTek MT8183 display PWM driver support
  pwm: hibvt: Add hi3559v100 support
  dt-bindings: pwm: hibvt: Add hi3559v100 support
  pwm: hibvt: Use individual struct per of-data
  pwm: imx: Signedness bug in imx_pwm_get_state()
  pwm: imx: Split into two drivers
  pwm: imx: Don't print an error on -EPROBE_DEFER
  pwm: imx: Set driver data earlier simplifying the end of ->probe()
  ...

Pull mailbox updates from Jassi Brar:

 - mailbox-test: support multiple controller instances

 - misc cleanup: IMX, STM32 and Tegra

 - new driver: ZynqMP IPI

* tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: imx: keep MU irq working during suspend/resume
  dt-bindings: mailbox: Add Xilinx IPI Mailbox
  mailbox: ZynqMP IPI mailbox controller
  mailbox: stm32-ipcc: remove useless device_init_wakeup call
  mailbox: stm32-ipcc: do not enable wakeup source by default
  mailbox: mailbox-test: fix null pointer if no mmio
  mailbox: mailbox-test: fix debugfs in multi-instances
  mailbox: tegra-hsp: mark suspend function as __maybe_unused