when callback is generated in NFSv4 server, it doesn't set the source
address. When an alias IP is utilized on NFSv4 server and suppose the
client is accessing via that alias IP (e.g. eth0:0), the client invokes
the callback to the IP address that is set on the original device (e.g.
eth0). This behavior results in timeout of xprt.
The patch sets the IP address that the client should invoke callback to.
Signed-off-by: Takuma Umeya <tumeya@redhat.com>
[bfields@redhat.com: Simplify gen_callback arguments, use helper function]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

This avoids the need for the confusing ESRCH mapping.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

These are internal nfsd interfaces.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

According to rfc 3530 BADNAME is for strings that represent paths;
BADOWNER is for user/group names that don't map.

And the too-long name should probably be BADOWNER as well; it's
effectively the same as if we couldn't map it.

Cc: stable@kernel.org
Reported-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The nfs server only supports read delegations for now, so we don't care
how conflicts are determined.  All we care is that unlocks are
recognized as matching the leases they are meant to remove.  After the
last patch, a comparison of struct files will work for that purpose.  So
we no longer need this callback.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

When we converted to sharing struct filess between nfs4 opens I went too
far and also used the same mechanism for delegations.  But keeping
a reference to the struct file ensures it will outlast the lease, and
allows us to remove the lease with the same file as we added it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

nfsd controls the lifetime of the lease, not the lock code, so there's
no need for this callback on lease destruction.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Supposes cache_check runs simultaneously with an update on a different
CPU:

	cache_check			task doing update
	^^^^^^^^^^^			^^^^^^^^^^^^^^^^^

	1. test for CACHE_VALID		1'. set entry->data
	   & !CACHE_NEGATIVE

	2. use entry->data		2'. set CACHE_VALID

If the two memory writes performed in step 1' and 2' appear misordered
with respect to the reads in step 1 and 2, then the caller could get
stale data at step 2 even though it saw CACHE_VALID set on the cache
entry.

Add memory barriers to prevent this.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We attempt to turn a cache entry negative in place.  But that entry may
already have been filled in by some other task since we last checked
whether it was valid, so we could be modifying an already-valid entry.
If nothing else there's a likely leak in such a case when the entry is
eventually put() and contents are not freed because it has
CACHE_NEGATIVE set.

So, take the cache_lock just as sunrpc_cache_update() does.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We no longer need a few of these special cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We no longer need this.

Also, EWOULDBLOCK is generally a synonym for EAGAIN, but that may not be
true on all architectures, so map it as well.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Currently we use -EAGAIN returns to determine when to drop a deferred
request.  On its own, that is error-prone, as it makes us treat -EAGAIN
returns from other functions specially to prevent inadvertent dropping.

So, use a flag on the request instead.

Returning an error on request deferral is still required, to prevent
further processing, but we no longer need worry that an error return on
its own could result in a drop.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Commit d29068c4 "sunrpc: Simplify cache_defer_req and related
functions." asserted that cache_check() could determine success or
failure of cache_defer_req() by checking the CACHE_PENDING bit.

This isn't quite right.

We need to know whether cache_defer_req() created a deferred request,
in which case sending an rpc reply has become the responsibility of the
deferred request, and it is important that we not send our own reply,
resulting in two different replies to the same request.

And the CACHE_PENDING bit doesn't tell us that; we could have
succesfully created a deferred request at the same time as another
thread cleared the CACHE_PENDING bit.

So, partially revert that commit, to ensure that cache_check() returns
-EAGAIN if and only if a deferred request has been created.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>

We never want to drop a request if we could return a JUKEBOX/DELAY error
instead; so, convert to nfserr_jukebox and let nfsd_dispatch() convert
that to a dropit error as a last resort if JUKEBOX/DELAY is unavailable
(as in the NFSv2 case).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

setup_callback_client(), nfsd4_release_cb() and nfsd4_process_cb_update()
do not have users outside the translation unit. Let's declare it as
static.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: NeilBrown <neilb@suse.de>
[bfields@redhat.com: moved svcauth_unix_purge outside ifdef's.]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Once a sunrpc cache entry is VALID, we should be replacing it (and
allowing any concurrent users to destroy it on last put) instead of
trying to update it in place.

Otherwise someone referencing the ip_map we're modifying here could try
to use the m_client just as we're putting the last reference.

The bug should only be seen by users of the legacy nfsd interfaces.

(Thanks to Neil for suggestion to use sunrpc_invalidate.)
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The secinfo_no_name code oopses on encoding with

	BUG: unable to handle kernel NULL pointer dereference at 00000044
	IP: [<e2bd239a>] nfsd4_encode_secinfo+0x1c/0x1c1 [nfsd]

We should implement a nfsd4_encode_secinfo_no_name() instead using
nfsd4_encode_secinfo().
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Implementation of this operation is mandatory for NFSv4.1.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We'll reuse this code in secinfo_no_name.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

See the referenced spec language; an attempt by a 4.1 client to use the
current filehandle after a secinfo call should result in a NOFILEHANDLE
error.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

And remove unnecessary double semicolon too.

No effect to code, as test is != 0.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

These macros never be used for several years.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

these pieces of code only make sense when CONFIG_NFSD_DEPRECATED enabled
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>

 fs/nfsd/nfsctl.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Currently svc_sock_names calls svc_close_xprt on a svc_sock to
which it does not own a reference.
As soon as svc_close_xprt sets XPT_CLOSE, the socket could be
freed by a separate thread (though this is a very unlikely race).

It is safer to hold a reference while calling svc_close_xprt.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The xpt_pool field is only used for reporting BUGs.
And it isn't used correctly.

In particular, when it is cleared in svc_xprt_received before
XPT_BUSY is cleared, there is no guarantee that either the
compiler or the CPU might not re-order to two assignments, just
setting xpt_pool to NULL after XPT_BUSY is cleared.

If a different cpu were running svc_xprt_enqueue at this moment,
it might see XPT_BUSY clear and then xpt_pool non-NULL, and
so BUG.

This could be fixed by calling
  smp_mb__before_clear_bit()
before the clear_bit.  However as xpt_pool isn't really used,
it seems safest to simply remove xpt_pool.

Another alternate would be to change the clear_bit to
clear_bit_unlock, and the test_and_set_bit to test_and_set_bit_lock.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Thanks to dysbr01@ca.com for noticing that the debugging printk in
the v3 write procedure can print >2GB offsets as negative numbers:
	https://bugzilla.kernel.org/show_bug.cgi?id=23342Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Instead of failing to find client entries which don't match the
minorversion, we should be finding them, then either erroring out or
expiring them as appropriate.

This also fixes a problem which would cause the 4.1 server to fail to
recognize clients after a second reboot.
Reported-by: Casey Bodley <cbodley@citi.umich.edu>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Reviewed-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix typo which broke '..' detection in ext4_find_entry()
  ext4: Turn off multiple page-io submission by default

Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where
this is being used to specify array sizes.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Miller <davem@davemloft.net>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The MSM main git tree has changed over to this new address.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The install_special_mapping routine (used, for example, to setup the
vdso) skips the security check before insert_vm_struct, allowing a local
attacker to bypass the mmap_min_addr security restriction by limiting
the available pages for special mappings.

bprm_mm_init() also skips the check, and although I don't think this can
be used to bypass any restrictions, I don't see any reason not to have
the security check.

  $ uname -m
  x86_64
  $ cat /proc/sys/vm/mmap_min_addr
  65536
  $ cat install_special_mapping.s
  section .bss
      resb BSS_SIZE
  section .text
      global _start
      _start:
          mov     eax, __NR_pause
          int     0x80
  $ nasm -D__NR_pause=29 -DBSS_SIZE=0xfffed000 -f elf -o install_special_mapping.o install_special_mapping.s
  $ ld -m elf_i386 -Ttext=0x10000 -Tbss=0x11000 -o install_special_mapping install_special_mapping.o
  $ ./install_special_mapping &
  [1] 14303
  $ cat /proc/14303/maps
  0000f000-00010000 r-xp 00000000 00:00 0                                  [vdso]
  00010000-00011000 r-xp 00001000 00:19 2453665                            /home/taviso/install_special_mapping
  00011000-ffffe000 rwxp 00000000 00:00 0                                  [stack]

It's worth noting that Red Hat are shipping with mmap_min_addr set to
4096.
Signed-off-by: Tavis Ormandy <taviso@google.com>
Acked-by: Kees Cook <kees@ubuntu.com>
Acked-by: Robert Swiecki <swiecki@google.com>
[ Changed to not drop the error code - akpm ]
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add missing header file:

arch/x86/crypto/ghash-clmulni-intel_glue.c:256: error: implicit declaration of function 'IS_ERR'
arch/x86/crypto/ghash-clmulni-intel_glue.c:257: error: implicit declaration of function 'PTR_ERR'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: It is likely that WORKER_NOT_RUNNING is true
  MAINTAINERS: Add workqueue entry
  workqueue: check the allocation of system_unbound_wq