- 19 Feb, 2012 40 commits
-
-
Robert Love authored
The label implies that it should be called when there is 'nomod.' I read that to mean that the module reference 'get' failed. However, it's only called when the module reference 'get' succeeded. I think it makes more sense to name the label, 'out_putmod' since it should be called when we need to 'put' the module reference taken in the routine before returning. Signed-off-by:
Robert Love <robert.w.love@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Neerav Parikh authored
Allow FDMI attributes to be exposed via the fc_host class object for the fcoe driver. Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Tested-by:
-
Robert Love authored
This is more of a debug statement. As a KERN_ERR we generate log entries anytime any netdev goes up or down, so when booting there are notification log entries for all system interfaces including 'lo'. This is too much. Let's just log when necessary. Signed-off-by:
-
Dave Jiang authored
This allows the controller to do WRITE_INSERT and READ_STRIP for SAS disks that support protection information. SAS disks must be formatted with protection information to use this feature via sg_format. sg3_utils-1.32 -- sg_format version 1.19 20110730 sg_format usage: sg_format --format --verbose --pinfo /dev/sda Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Arun Easi authored
Signed-off-by:
Arun Easi <arun.easi@qlogic.com> Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
Arun Easi authored
Signed-off-by:
-
Arun Easi authored
Signed-off-by:
-
Arun Easi authored
A device logout sent in the delete path of a fcport would clear the port handle binding inside the firmware. This could lead to queued work items for the fcport, if any, getting incorrect results. This patch fixes the issue by checking for device name changes after a call to get port database. Signed-off-by:
-
Chad Dupuis authored
Add a field to the qla_hw_data struct to allow us to set the maximum number of fabric devices on a per adapter basis based on ISP type. [jejb: fix up missing rval = QLA_SUCCESS to prevent uninit var warning] Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Rather than continuously allocating and freeing swl within the discovery process, simply pre-allocate it the first time that it's needed, cache it through the rest of the lifecycle of the driver and free it at module unload. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Arun Easi authored
Signed-off-by:
-
Arun Easi authored
Signed-off-by:
-
Arun Easi authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Andrew Vasquez authored
Don't use default 30 second mailbox-command timeout for these serial requests, instead, limit the TMO to the standard 2*RATOV plus some fudge-factor. Signed-off-by:
-
Andrew Vasquez authored
During command failure/non-recognition, the upper-layer FC-transport expects the drivers to set job-reply->reply_payload_rcv_len. Do this in a consistent manner to avoid duplication. Signed-off-by:
-
Andrew Vasquez authored
During rport tear-down, make sure we do an implicit LOGO of the fcport in our firmware to try to clear any residual commands associated with that fcport. Signed-off-by:
-
Chad Dupuis authored
Make sure that all calls to ha->isp_ops->fabric_login() check the return value for failure. Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Joe Carnuccio authored
When thermal temperature initially fails, return a blank string to the sysfs interface. This fixes the initial display of 0.00 followed by subsequent display of blank line; the initial 0.00 should have not displayed for cards that do not support thermal temperature. Signed-off-by:
-
Arun Easi authored
Instead of processing each RSCN individually, use only the name server results from the switch to tell the existance of a given fcport. Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
-
Andrew Vasquez authored
The driver is logging a slew of 'good' status requests for ELS/CT passthrough commands. Change some log messages from: * ql_log() -> ql_dbg() * ql_log_info -> ql_dbg_user Signed-off-by: -
Giridhar Malavali authored
Rework the structures related to SRB processing to minimize the memory allocations per I/O and manage resources associated with and completions from common routines. Signed-off-by:
-
Andrew Vasquez authored
Original 'defaults' were not OUI valid. Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by:
Nigel Kirkland <nigel.kirkland@qlogic.com> Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Mahesh Rajashekhara authored
Added Sync. mode to support Series 7/8/9 controller families: This is a compatibility mode for all these controller families. The Async. (Performance) mode can be changed in the future. First Async. mode version added for Series 7; Controller parameter aac_sync_mode added Signed-off-by:
Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by:
-
Eddie Wai authored
The error_mask module param overrides has a bug which prevented the new module param values to take effect. Also changed the type attribute of the error_mask1/2 module params from int to uint to allow the MSB to be set. Signed-off-by:
Eddie Wai <eddie.wai@broadcom.com> Acked-by:
Anil Veerabhadrappa <anilgv@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
bnx2i_percpu_thread_create() create per cpu kthread, and should use proper NUMA aware API. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
-
Jing Huang authored
This patch add bfa driver readme file to Documentation/scsi Signed-off-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
-
Jesper Juhl authored
If 'drv_fcxp = kzalloc(sizeof(struct bfad_fcxp), GFP_KERNEL);' fails and returns NULL, then we'll leak the memory allocated to 'bsg_fcpt' when we jump to 'out:' and the variable subsequently goes out of scope. Also remove the cast of the kzalloc() return value. kzalloc() returns a void* which is implicitly converted, so the explicit cast is pointless. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Krishna Gudipati <kgudipat@brocade.com> Signed-off-by:
-
Marcin Tomczak authored
Enabling clock gating for power savings on entry to controller ready state. Disable SCU clock gating for power savings on exit from the controller ready state. The gating is fully automated by silicon after setting the mode. Signed-off-by:
Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by:
-
Mike Christie authored
If the driver/lib has called scsi_done and cleaned up internally but scsi layer has not yet called blk_mark_rq_complete when the command times out we hit a problem if the timeout code calls blk_mark_rq_complete first. When the time out code calls into the driver we were returning BLK_EH_RESET_TIMER and that causes the timeout code to just call us again later. We need to be calling BLK_EH_HANDLED so the timeout code can complete the completion process because it had called blk_mark_rq_complete on the command and now owns its processing. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
