- 25 Jan, 2010 26 commits
-
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Johannes Berg authored
Currently, the remain_on_channel work callback needs to track in its own data structure whether the work was just started or not. By reordering some code this becomes unnecessary, the generic wk->started variable can still be 'false' on the first invocation and only be 'true' on actual timeout invocations, so that the extra variable can be removed. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Johannes Berg authored
What a stupid mistake. In commit 813d7669 Author: Johannes Berg <johannes@sipsolutions.net> Date: Sun Jan 17 01:47:58 2010 +0100 mac80211: move control.hw_key assignment I inserted code testing the wrong flags field, which means that the test is almost always true (it's really testing for the peer's WMM support) and thus the later parts of the stack assume hw crypto will be done even if that's not true. Obviously, that broke software crypto. Maxim said so specifically, and Jochen probably uses some cipher that iwl3945 doesn't support in hardware, which might also explain that Maxim reports that even hw crypto is broken. Fix this to test the right flags field. Reported-by:Maxim Levitsky <maximlevitsky@gmail.com> Reported-by:
Jochen Friedrich <jochen@scram.de> Signed-off-by:
-
Felix Fietkau authored
ieee80211_work_rx_mgmt currently enqueues various management frames, including deauth and disassoc frames, however the function ieee80211_work_rx_queued_mgmt does not handle these, as they should only occur if the AP is buggy. It does emit a WARN_ON when this happens though, and several users have reported such instances. Fix the WARN_ON by not queueing such frames in the first place. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Kalle Valo authored
Johannes noticed that I had incorrectly documented the context of update_tkip_key() driver operation. It must be atomic because all RX code is run inside rcu critical section. Reported-by:
Kalle Valo <kalle.valo@iki.fi> Signed-off-by:
-
Michael Buesch authored
The TKIP key update callback is called from the RX path, where the driver mutex is already locked. This results in a circular locking bug. Avoid this by removing the lock. Johannes noted that there is a separate bug: The callback still breaks on SDIO hardware, because SDIO hardware access needs to sleep, but we are not allowed to sleep in the callback due to mac80211's RCU locking. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Tested-by:
-
Felix Fietkau authored
ath9k currently forces hw->max_rate_tries to 4 to work around rate control inefficiencies. This has some negative side effects, such as rate_control_send_low also using a maximum of 4 tries, which could negatively affect reliability of unicast management frames. This patch pushes the retry limit to the rate control instead, and allows it to use more tries on the last stage to prevent unnecessary packet loss. Signed-off-by:
-
Daniel Halperin authored
The following commit commit e4da8c37 Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Dec 23 13:15:43 2009 +0100 mac80211: make off-channel work generic triggered a bug in iwlwifi where HT parameters would not be correctly set in some mac80211 pathways. The aggregation (and possibly other) station flags were not being set, which limited the size of aggregation blocks and reduced throughput at high rates. >From Johannes: """ Due to Wey-Yi's patch to use the set-channel command when the channel changes while associated, we don't get a full new RXON. Therefore, we don't re-set the rxon-station either. However, under some circumstances that apparently have gotten more likely mac80211 will first set up the BSS info, then add the station and then switch to an HT channel type. Therefore, the check for "priv->current_ht_config.is_ht" in iwl_rxon_add_station() will hit false and not fill in the HT information. However, that check can just be removed, which is the easiest fix for all this, because the HT capa struct is always there, just could possibly have the ht_supported member set to false. """ A sample good link in my 3x3 network improves by approximately 25% TCP throughput. This fixes Bug 2144 (http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2144). Signed-off-by:
Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Reinette Chatre authored
In iwlagn the support for spectrum measurement command has been disabled since v2.6.29 without any requests for it. In addition to this when this command is indeed enabled it has been found to trigger firmware SYSASSERT on at least 4965 and 5100 hardware (see http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1952 ). Since then this code has been bitrotting and cannot just be enabled without porting. Remove support for spectrum measurement command from iwlagn. It can be added back if there is a future need and the firmware problem it triggers has been fixed. Support for the spectrim measurement notification remains as it has been enabled all the time. In addition to this remove the 3945 spectrum measurement command Kconfig option and make this command always supported. The code added by this enabling is minimal and only run when user triggers a spectrum measurement request via sysfs. Signed-off-by:
-
Johannes Berg authored
sparse won't check endianness annotations by default, but iwlwifi is and should be clean so we can make sparse check them on it. Signed-off-by:
-
Johannes Berg authored
sparse correctly warns about symbol not being static, make static to shut it up. Signed-off-by:
-
Johannes Berg authored
The debugfs code can be made a whole lot more efficient by using debugfs_remove_recursive(), the large chunk of variables can completely go away and by moving two variables we no longer need to allocate an extra chunk of memory. Signed-off-by:
-
Johannes Berg authored
It is better to first notify cfg80211 about the hw rfkill state (so the rfkill device that will be registered won't have the wrong state while being registered), and the power/tt variable init can (and probably should) also be done first. Also rename iwl_setup_mac to iwl_mac_setup_register to better describe what it really does. Signed-off-by:
-
Johannes Berg authored
It really hasn't been for a long time, not sure why this stuck around. Signed-off-by:
-
Wey-Yi Guy authored
Adding "bt_coex_active" module parameter for iwlcore to enable/disable BT coexist; if bt_coex_active is true (default), uCode will do kill/defer every time the priority line is asserted (BT is sending signals on the priority line in the PCIx). By disable the bt_coex_active, uCode will ignore the BT activity and perform the normal operation. Users might experience transmit issue on some platform due to this WiFi/BT co-exist problem. The possible symptoms are: NetworkManager and other similar programs can scan and find all the available APs, but will timeout and unable to associate with any of the APs; no out-going frames can be found with wireless sniffer tools. On those platforms, WiFi communication can be restored by set "bt_coex_active" module parameter to "false" Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Give better bit filed define and description for flag parameter in REPLY_BT_CONFIG command: flags: bit 0 - 1: BT channel announcement enabled 0: disable bit 1 - 1: priority of BT device enabled 0: disable bit 2 - 1: BT 2 wire support enabled 0: disable Signed-off-by: -
Reinette Chatre authored
Add function pointer for broadcast station addition so that we can call it in from iwlcore at a later time. We only distinguish between iwlagn and iwl3945 broadcast station addition. For the iwl3945 station addition we add that function to iwlcore since that is where most station functionality resides, making it part of iwl3945 will require significant code reorganization that will dilute station management functionality. This seems to be an efficient solution. It may seem as though we are removing error checking when adding the 3945 broadcast station but this error checking was never really necessary since the function returns the station id and the broadcast station id is always set. Signed-off-by:
-
Reinette Chatre authored
The work done when a station is added is very similar whether the station is added synchronously or asynchronously. Centralize this work. At the same time increase the status flags being checked for when the command returns with accompanying debug messages. Also increase checking when setting the "ucode active" state with accompanying debugging. This work is done in preparation for station notification support. Signed-off-by:
-
Abhijeet Kolekar authored
From: Abhijeet Kolekar <abhijeet.kolekar@intel.com> For 6X50 DC calibration needs to be initialized else uCode will run an endless loop. Enbale DC calibration in hw config. Signed-off-by:
Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by:
-
Trieu 'Andrew' Nguyen authored
We have seen the throughput dropped due to external noisy environment and the radio is out of tune. There are lot of plcp errors indicating this condition. Eventually the station can get de-authenticated by the Access Point. By resetting and tuning the radio, the plcp errors are reduced or eliminated and the throughput starts to rise. To prevent unexpected behavior such as drop in throughput or deauthentication, - The change provides the driver feature to monitor and tune the radio base on the statistics notification from the uCode. - It also allows the setting of the plcp error rate threshold via the plcp_delta under debugfs interface. Signed-off-by:
Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Add additional logic for internal scan routine to control how frequent this function should be performed. The intent of this function is to reset/re-tune the radio and bring the RF/PHY back to normal state, it does not make sense calling it too frequent, if reset the radio can not bring it back to normal state, it indicate there are other reason to cause the radio not operate correctly. Signed-off-by:
-
Henry Zhangh authored
This patch allows A band to be scanned when driver is associated to AP. Scan mechanism is that mac80211/cfg80211 requests driver to scan G band first and then immediately to scan A band. Original code require driver to wait for 2 seconds after any scan before another scan will be performed. This caused driver to service G band scan request from mac80211/cfg80211 but deny the A band scan request. Signed-off-by:
Henry Zhangh <hongx.c.zhang@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Adding "radio reset" function to help reset and stabilize the radio. During normal operation, sometime for unknown reason, radio encounter problem and can not recover by itself; the best way to recover from it is to reset and re-tune the radio. Currently, there is no RF reset command available, but since radio will get reset when switching channel, use internal hw scan request to force radio reset and get back to normal operation state. The internal hw scan will only perform passive scan on the first available channel (not the channel being used) in associated state. The request should be ignored if already performing scan operation or STA is not in associated state. Also include an "internal_scan" debugfs file to help trigger the internal scan from user mode. Signed-off-by:
-
Wey-Yi Guy authored
Add support to configure missed beacon threshold, by default, if receive "missed beacon" notification from uCode and has more than 5 consecutive beacon missed, then perform sensitivity calibration; with this change, allow user to adjust the missed beacon threshold from debugfs in case more sensitivity calibration required for better performance in noisy environment The default value (=5) should be good enough for the normal condition, but for very noisy environment, more sensitivity calibration could help improve the throughput, so by setting the missed beacon threshold to lower number, user might experience better performance result. Signed-off-by:
-
- 23 Jan, 2010 1 commit
-
-
Kalle Valo authored
Pavel Roskin reported a crash in ieee80211_tx_h_select_key(): http://marc.info/?l=linux-wireless&m=126419655108528&w=2 This is a regression from patch "mac80211: move control.hw_key assignment". Fix it as suggested by Johannes, adding an else statement to make sure that tx->key is not accessed when it's null. Compile-tested only. Reported-by:
Pavel Roskin <proski@gnu.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
- 22 Jan, 2010 13 commits
-
-
Johannes Berg authored
ieee80211_tx_h_select_key might decide that a frame need not be encrypted at all, in which case it will clear tx->key. In that case it may crash if a key was previously selected, e.g. as the default key. This is also due to my patch "mac80211: move control.hw_key assignment". Signed-off-by:
-
Christian Lamparter authored
This patch continues the effort which began with: "[PATCH] p54pci: move tx cleanup into tasklet". Thanks to these changes, p54pci's interrupt & tx cleanup routines can be made lock-less. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Felix Fietkau authored
The loop that passes non-data frames to all relevant vifs inside the __ieee80211_rx_handle_packet keeps a pointer to the previous sdata to avoid having to make unnecessary copies of the frame it's handling. This led to a bug that caused it to apply the ieee80211_rx_data state to the wrong interface, thereby either missing the rx.sta pointer or having it assigned where it shouldn't be. This breaks (among other things) aggregation on some vifs, as action frame exchages are dropped to the cooked monitor interface due to rx->sta being NULL. Fix this by restructuring the loop so that it prepares the rx data just before making the skb copy and calling the rx handlers. Cc: stable@kernel.org Signed-off-by:
-
Vasanthakumar Thiagarajan authored
As all bt packets are priority traffic during bt scan, wifi will get disconnected when bt scan lasts for few seconds. Fix this by allocating 10% of bt period time (4.5ms) to wifi fully. Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
-
Bob Copeland authored
The beacon sent gating doesn't seem to work with any combination of flags. Thus, buffered frames tend to stay buffered forever, using up tx descriptors. Instead, use the DBA gating and hold transmission of the buffered frames until 80% of the beacon interval has elapsed using the ready time. This fixes the following error in AP mode: ath5k phy0: no further txbuf available, dropping packet Add a comment to acknowledge that this isn't the best solution. Signed-off-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
Bob Copeland authored
When using the external sleep clock in AP mode, the TSF increments too quickly, causing beacon interval to be much lower than it is supposed to be, resulting in lots of beacon-not-ready interrupts. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14802. Signed-off-by:
-
Andriy Tkachuk authored
ieee80211_hdrlen() should account account new HT Control field in 802.11 data frame header introduced by IEEE 802.11n standard. According to 802.11n-2009 HT Control field is present in data frames when both of following are met: 1. It is QoS data frame. 2. Order bit is set in Frame Control field. The change might be totally compatible with legacy non-11n aware frames, because 802.11-2007 standard states that "all QoS STAs set this subfield to 0". Signed-off-by:
Andriy V. Tkachuk <andrit@ukr.net> Acked-by : Benoit Papillault <benoit.papillault@free.fr> Signed-off-by:
-
Johannes Berg authored
If a device has multiple MAC addresses, userspace will need to know about that. Similarly, if it allows the MAC addresses to vary by a bitmask. If a driver exports multiple addresses, it is assumed that it will be able to deal with that many different addresses, which need not necessarily match the ones programmed into the device; if a mask is set then the device should deal addresses within that mask based on an arbitrary "base address". To test it all and show how it is used, add support to hwsim even though it can't actually deal with addresses different from the default. Signed-off-by:
-
