- 31 May, 2015 6 commits
-
-
Sudip Mukherjee authored
parport subsystem starts using the device-model. Drivers using the device-model has to define devmodel as true and should register the device with parport using parport_register_dev_model(). Tested-by:
Jean Delvare <jdelvare@suse.de> Tested-by:
Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shailendra Verma authored
Static variables are initialised to 0 by GCC. Fixes the following checkpatch error: ERROR: do not initialise statics to 0 or NULL FILE: drivers/char/pcmcia/synclink_cs.c:440: static bool break_on_load = 0; Signed-off-by:
Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Memory notifiers are being executed in a sequential order and when one of them fails returning something different from NOTIFY_OK the remainder of the notification chain is not being executed. When a memory block is being onlined in online_pages() we do memory_notify(MEM_GOING_ONLINE, ) and if one of the notifiers in the chain fails we end up doing memory_notify(MEM_CANCEL_ONLINE, ) so it is possible for a notifier to see MEM_CANCEL_ONLINE without seeing the corresponding MEM_GOING_ONLINE event. E.g. when CONFIG_KASAN is enabled the kasan_mem_notifier() is being used to prevent memory hotplug, it returns NOTIFY_BAD for all MEM_GOING_ONLINE events. As kasan_mem_notifier() comes before the hv_memory_notifier() in the notification chain we don't see the MEM_GOING_ONLINE event and we do not take the ha_region_mutex. We, however, see the MEM_CANCEL_ONLINE event and unconditionally try to release the lock, the following is observed: [ 110.850927] ===================================== [ 110.850927] [ BUG: bad unlock balance detected! ] [ 110.850927] 4.1.0-rc3_bugxxxxxxx_test_xxxx #595 Not tainted [ 110.850927] ------------------------------------- [ 110.850927] systemd-udevd/920 is trying to release lock (&dm_device.ha_region_mutex) at: [ 110.850927] [<ffffffff81acda0e>] mutex_unlock+0xe/0x10 [ 110.850927] but there are no more locks to release! At the same time we can have the ha_region_mutex taken when we get the MEM_CANCEL_ONLINE event in case one of the memory notifiers after the hv_memory_notifier() in the notification chain failed so we need to add the mutex_is_locked() check. In case of MEM_ONLINE we are always supposed to have the mutex locked. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Keith Mange authored
Add support for Windows 10. Signed-off-by:
Keith Mange <keith.mange@microsoft.com> Signed-off-by:
-
Vladimir Zapolskiy authored
On attempt to register a dynamic minor misc device its minor number is updated to a virtual minor number prior to device_create() call, however on error path misc->minor == MISC_DYNAMIC_MINOR is not restored. Following the rule of thumb that a function returning an error must not change the state of the caller, assign MISC_DYNAMIC_MINOR back. The problem is met in a sutuation, when subsys_initcall(misc_init) is not yet called and misc_class is not created, but misc_register() modifies statically defined ".minor = MISC_DYNAMIC_MINOR", therefore implicitly changing the client's logic on next attempt (e.g. retrying from deferred list) to register a misc device, whose minor number is converted from dynamic to some unknown static one. Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by:
-
Greg Kroah-Hartman authored
A previous commit, c93b76b3 ("mei: bus: report also uuid in module alias") caused a build error as I missed applying a needed patch to add some macros to uapi/linux/uuid.h. Instead of those additional macros, change the mei code to use the existing uuid structure directly. Fixes: c93b76b3 Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 24 May, 2015 34 commits
-
-
Pali Rohár authored
This patch splits CONFIG_I8K compile option to SENSORS_DELL_SMM and CONFIG_I8K. Option SENSORS_DELL_SMM is now used to enable compilation of dell-smm-hwmon driver and old CONFIG_I8K option to enable /proc/i8k interface in driver. So this change allows to compile dell-smm-hwmon driver without legacy /proc/i8k interface which is needed only for old Dell Inspirion models or for userspace i8kutils package. For backward compatibility when CONFIG_I8K is enabled then also SENSORS_DELL_SMM is enabled and so driver dell-smm-hwmon (with /proc/i8k) is compiled. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
-
Pali Rohár authored
This commit moves i8k driver to hwmon tree under name dell-smm-hwmon which is better name then abbreviation i8k. For backward compatibility is added macro MODULE_ALIAS("i8k") so modprobe will load driver also old name i8k. CONFIG_I8K compile option was not changed. This commit also adds me as maintainer of this new dell-smm-hwmon driver and remove Guenter Roeck from list who is implicit maintainer all hwmon drivers. Signed-off-by: -
Dan Carpenter authored
My static checker complains that this sprintf() can overflow but really it can't. Just silence the warning by using snprintf(). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/built-in.o: In function `xilly_of_unmap': xillybus_of.c:(.text+0xa860e): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `xilly_map_single_of': xillybus_of.c:(.text+0xa8668): undefined reference to `dma_map_single' xillybus_of.c:(.text+0xa8676): undefined reference to `dma_mapping_error' xillybus_of.c:(.text+0xa86ca): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `xilly_dma_sync_single_for_device_of': xillybus_of.c:(.text+0xa8700): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `xilly_dma_sync_single_for_cpu_of': xillybus_of.c:(.text+0xa8726): undefined reference to `dma_sync_single_for_cpu' Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Eli Billauer <eli.billauer@gmail.com> -- v2: - Add Acked-by, send to char and misc drivers maintainers. Signed-off-by:
-
Joe Perches authored
Move the close parenthesis. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
During bootup pcmcia (pccardd) code enforces the following warning backtrace: do not call blocking ops when !TASK_RUNNING; state=1 set at [<c0319e74>] pccardd+0xb8/0x3fc Modules linked in: CPU: 0 PID: 14 Comm: pccardd Not tainted 4.0.0-rc6+ #11 Hardware name: Sharp-Collie [<c0105cd8>] (unwind_backtrace) from [<c0103ef8>] (show_stack+0x10/0x14) [<c0103ef8>] (show_stack) from [<c010e9b8>] (warn_slowpath_common+0x74/0xac) [<c010e9b8>] (warn_slowpath_common) from [<c010ea20>] (warn_slowpath_fmt+0x30/0x40) [<c010ea20>] (warn_slowpath_fmt) from [<c012b1b4>] (__might_sleep+0x84/0xa0) [<c012b1b4>] (__might_sleep) from [<c040fbb0>] (mutex_lock_nested+0x24/0x388) [<c040fbb0>] (mutex_lock_nested) from [<c0319eb4>] (pccardd+0xf8/0x3fc) [<c0319eb4>] (pccardd) from [<c0127370>] (kthread+0xdc/0xfc) [<c0127370>] (kthread) from [<c01013a8>] (ret_from_fork+0x14/0x2c) ---[ end trace fd94911637eed4ba ]--- This happens due to kthread trying to lock mutex in a TASK_INTERRUPTIBLE state. Limit TASK_INTERRUPTIBLE task state to the schedule() call only, so that the rest of the code runs in TASK_RUNNING state. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
Alan authored
[um maintainers appear to be vanished] I can't prove the case pointed out in https://bugzilla.kernel.org/show_bug.cgi?id=82341 is correct so let us play safe. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Stephen Boyd authored
This code is no longer used now that mach-msm has been removed. Delete it. Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Vitaly Kuznetsov authored
Primary channels are distributed evenly across all vcpus we have. When the host asks us to create subchannels it usually makes us num_cpus-1 offers and we are supposed to distribute the work evenly among the channel itself and all its subchannels. Make sure they are all assigned to different vcpus. Signed-off-by:
-
Vitaly Kuznetsov authored
We need to call init_vp_index() after we added the channel to the appropriate list (global or subchannel) to be able to use this information when assigning the channel to the particular vcpu. To do so we need to move a couple of functions around. The only real change is the init_vp_index() call. This is a small refactoring without a functional change. Signed-off-by:
-
Vitaly Kuznetsov authored
It is unlikely that that host will ask us to close only one subchannel for a device but let's be consistent. Do both num_sc++ and num_sc-- with channel->lock to be on the safe side. Signed-off-by:
-
Vitaly Kuznetsov authored
next_oc and num_sc fields of struct vmbus_channel deserve a description. Move them closer to sc_list as these fields are related to it. Signed-off-by:
-
Vitaly Kuznetsov authored
Remove some code duplication, no functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
Explicitly kill tasklets we create on module unload. Signed-off-by:
-
Vitaly Kuznetsov authored
In case there was an error reported in the response to the CHANNELMSG_OPENCHANNEL call we need to do the cleanup as a vmbus_open() user won't be doing it after receiving an error. The cleanup should be done on all failure paths. We also need to avoid returning open_info->response.open_result.status as the return value as all other errors we return from vmbus_open() are -EXXX and vmbus_open() callers are not supposed to analyze host error codes. Signed-off-by:
-
K. Y. Srinivasan authored
Implement the protocol for tearing down the monitor state established with the host. Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of some unused definitions. Signed-off-by:
-
Dexuan Cui authored
free_channel() has been invoked in vmbus_remove() -> hv_process_channel_removal(), or vmbus_remove() -> ... -> vmbus_close_internal() -> hv_process_channel_removal(). We also change to use list_for_each_entry_safe(), because the entry is removed in hv_process_channel_removal(). This patch fixes a bug in the vmbus unload path. Thank Dan Carpenter for finding the issue! Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reported-by:
-
Vitaly Kuznetsov authored
Commit 96c1d058 ("Drivers: hv: vmbus: Add support for VMBus panic notifier handler") introduced atomic_notifier_chain_register() call on module load. We also need to call atomic_notifier_chain_unregister() on module unload as otherwise the following crash is observed when we bring hv_vmbus back: [ 39.788877] BUG: unable to handle kernel paging request at ffffffffa00078a8 [ 39.788877] IP: [<ffffffff8109d63f>] notifier_call_chain+0x3f/0x80 ... [ 39.788877] Call Trace: [ 39.788877] [<ffffffff8109de7d>] __atomic_notifier_call_chain+0x5d/0x90 ... [ 39.788877] [<ffffffff8109d788>] ? atomic_notifier_chain_register+0x38/0x70 [ 39.788877] [<ffffffff8109d767>] ? atomic_notifier_chain_register+0x17/0x70 [ 39.788877] [<ffffffffa002814f>] hv_acpi_init+0x14f/0x1000 [hv_vmbus] [ 39.788877] [<ffffffff81002144>] do_one_initcall+0xd4/0x210 Signed-off-by:
-
Vitaly Kuznetsov authored
In case we do request_resource() in vmbus_acpi_add() we need to tear it down to be able to load the driver again. Otherwise the following crash in observed when hv_vmbus unload/load sequence is performed on a Generation2 instance: [ 38.165701] BUG: unable to handle kernel paging request at ffffffffa00075a0 [ 38.166315] IP: [<ffffffff8107dc5f>] __request_resource+0x2f/0x50 [ 38.166315] PGD 1f34067 PUD 1f35063 PMD 3f723067 PTE 0 [ 38.166315] Oops: 0000 [#1] SMP [ 38.166315] Modules linked in: hv_vmbus(+) [last unloaded: hv_vmbus] [ 38.166315] CPU: 0 PID: 267 Comm: modprobe Not tainted 3.19.0-rc5_bug923184+ #486 [ 38.166315] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [ 38.166315] task: ffff88003f401cb0 ti: ffff88003f60c000 task.ti: ffff88003f60c000 [ 38.166315] RIP: 0010:[<ffffffff8107dc5f>] [<ffffffff8107dc5f>] __request_resource+0x2f/0x50 [ 38.166315] RSP: 0018:ffff88003f60fb58 EFLAGS: 00010286 Signed-off-by:
-
Vitaly Kuznetsov authored
Unify driver registration reporting and move it to debug level as normally daemons write to syslog themselves and these kernel messages are useless. Signed-off-by:
Alex Ng <alexng@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Introduce FCOPY_VERSION_1 to support kernel replying to the negotiation message with its own version. Signed-off-by:
-
Vitaly Kuznetsov authored
Introduce VSS_OP_REGISTER1 to support kernel replying to the negotiation message with its own version. Signed-off-by:
-
Vitaly Kuznetsov authored
Use /dev/vmbus/hv_vss instead of netlink. Signed-off-by:
-
Vitaly Kuznetsov authored
Use /dev/vmbus/hv_kvp instead of netlink. Signed-off-by:
-
Vitaly Kuznetsov authored
Convert to hv_utils_transport to support both netlink and /dev/vmbus/hv_kvp communication methods. Signed-off-by:
-
Vitaly Kuznetsov authored
Unify the code with the recently introduced hv_utils_transport. Netlink communication is disabled for fcopy. Signed-off-by:
-
Vitaly Kuznetsov authored
Convert to hv_utils_transport to support both netlink and /dev/vmbus/hv_vss communication methods. Signed-off-by:
-
Vitaly Kuznetsov authored
The intention is to make KVP/VSS drivers work through misc char devices. Introduce an abstraction for kernel/userspace communication to make the migration smoother. Transport operational mode (netlink or char device) is determined by the first received message. To support driver upgrades the switch from netlink to chardev operational mode is supported. Every hv_util daemon is supposed to register 2 callbacks: 1) on_msg() to get notified when the userspace daemon sent a message; 2) on_reset() to get notified when the userspace daemon drops the connection. Signed-off-by:
-
Vitaly Kuznetsov authored
Get an additional reference otherwise a crash is observed when hv_utils module is being unloaded while fcopy daemon is still running. .owner gives us an additional reference when someone holds a descriptor for the device. Signed-off-by:
-
Vitaly Kuznetsov authored
Switch to using the hvutil_device_state state machine from using 3 different state variables: fcopy_transaction.active, opened, and in_hand_shake. State transitions are: -> HVUTIL_DEVICE_INIT when driver loads or on device release -> HVUTIL_READY if the handshake was successful -> HVUTIL_HOSTMSG_RECEIVED when there is a non-negotiation message from the host -> HVUTIL_USERSPACE_REQ after userspace daemon read the message -> HVUTIL_USERSPACE_RECV after/if userspace has replied -> HVUTIL_READY after we respond to the host -> HVUTIL_DEVICE_DYING on driver unload In hv_fcopy_onchannelcallback() process ICMSGTYPE_NEGOTIATE messages even when the userspace daemon is disconnected, otherwise we can make the host think we don't support FCOPY and disable the service completely. Signed-off-by:
-
Vitaly Kuznetsov authored
Switch to using the hvutil_device_state state machine from using kvp_transaction.active. State transitions are: -> HVUTIL_DEVICE_INIT when driver loads or on device release -> HVUTIL_READY if the handshake was successful -> HVUTIL_HOSTMSG_RECEIVED when there is a non-negotiation message from the host -> HVUTIL_USERSPACE_REQ after we sent the message to the userspace daemon -> HVUTIL_USERSPACE_RECV after/if the userspace daemon has replied -> HVUTIL_READY after we respond to the host -> HVUTIL_DEVICE_DYING on driver unload In hv_vss_onchannelcallback() process ICMSGTYPE_NEGOTIATE messages even when the userspace daemon is disconnected, otherwise we can make the host think we don't support VSS and disable the service completely. Unfortunately there is no good way we can figure out that the userspace daemon has died (unless we start treating all timeouts as such), add a protection against processing new VSS_OP_REGISTER messages while being in the middle of a transaction (HVUTIL_USERSPACE_REQ or HVUTIL_USERSPACE_RECV state). Signed-off-by:
-
Vitaly Kuznetsov authored
Switch to using the hvutil_device_state state machine from using 2 different state variables: kvp_transaction.active and in_hand_shake. State transitions are: -> HVUTIL_DEVICE_INIT when driver loads or on device release -> HVUTIL_READY if the handshake was successful -> HVUTIL_HOSTMSG_RECEIVED when there is a non-negotiation message from the host -> HVUTIL_USERSPACE_REQ after we sent the message to the userspace daemon -> HVUTIL_USERSPACE_RECV after/if the userspace daemon has replied -> HVUTIL_READY after we respond to the host -> HVUTIL_DEVICE_DYING on driver unload In hv_kvp_onchannelcallback() process ICMSGTYPE_NEGOTIATE messages even when the userspace daemon is disconnected, otherwise we can make the host think we don't support KVP and disable the service completely. Unfortunately there is no good way we can figure out that the userspace daemon has died (unless we start treating all timeouts as such). In case the daemon restarts we skip the negotiation procedure (so the daemon is supposed to has the same version). This behavior is unchanged from in_handshake approach. Signed-off-by:
-
Vitaly Kuznetsov authored
KVP/VSS/FCOPY drivers work in fully serialized mode: we wait till userspace daemon registers, wait for a message from the host, send this message to the daemon, get the reply, send it back to host, wait for another message. Introduce enum hvutil_device_state to represend this state in all 3 drivers. Signed-off-by:
-
