Tegra's timer has 29 bits for the counter and for the "load" register
which sets counter to a load-value. The counter's value is lower than
the actual value by 1 because it starts to decrement after one tick,
hence the maximum number of ticks that hardware can handle equals to
29 bits + 1.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Tegra's timer uses n+1 scheme for the counter, i.e. timer will fire after
one tick if 0 is loaded. The minimum and maximum numbers of oneshot ticks
are defined by clockevents_config_and_register(min, max) invocation and
the min value is set to 1 tick. Hence "cycles" value can't ever be 0,
unless it's a bug in clocksource core.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

We're adjusting the timer's base for each per-CPU timer to point to the
actual start of the timer since device-tree defines a compound registers
range that includes all of the timers. In this case the original base
need to be restore before calling iounmap to unmap the proper address.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Convert all 1MHz literals to a verbose constant for better readability.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

There is no need to cast void because kernel allows to do that without
a warning message from a compiler.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The of_clk structure has a period field that is set up initially by
timer_of_clk_init(), that period value need to be adjusted for a case of
TIMER1-9 that are running at a fixed rate that doesn't match the clock's
rate. Note that the period value is currently used only by some of the
clocksource drivers internally and hence this is just a minor cleanup
change that doesn't fix anything.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

It was left unnoticed by accident, which means that the code could be
cleaned up a tad more.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The clocksource rate is initialized only for the first per-CPU clocksource
and then that rate shall be replicated for the rest of clocksource's
because they are initialized manually in the code.

Fixes: 3be2a85a0b61 ("clocksource/drivers/tegra: Support per-CPU timers on all Tegra's")
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Different mechanisms are used to test and set elf_hwcaps between ARM
and ARM64, this results in the use of ifdeferry in this file when
setting/testing for the EVTSTRM hwcap.

Let's improve readability by extracting this to an arch helper.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The system counter (sys_ctr) is a programmable system counter
which provides a shared time base to the Cortex A15, A7, A53 etc cores.
It is intended for use in applications where the counter is always
powered on and supports multiple, unrelated clocks. The sys_ctr hardware
supports:
 - 56-bit counter width (roll-over time greater than 40 years)
 - compare frame(64-bit compare value) contains programmable interrupt
   generation when compare value <= counter value.

[dlezcano] Fixed over 80 chars length warning
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Rename driver's source file to better reflect that it's not specific to
older SoC generations.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Arch-timer is more preferable for a range of Tegra SoC generations as
it has higher precision and is not affect by any kind of problems.
Pointed-out-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Remove build dependency on ARM for compile-testing to allow non-arch
specific build-bots (like Intel's test robot) to compile the driver and
report about problems.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Correct typo and use proper upper casing for acronyms in the comments,
use common style for error messages, prepend error messages with
"tegra-timer:", add error message for cpuhp_setup_state() failure and
clean up whitespaces in the code to fix checkpatch warnings.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Release all requested IRQ's on the request error to properly clean up
allocated resources.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The readl/writel functions are inserting memory barrier to ensure that
outstanding memory writes are completed, this results in L2 cache syncing
being done on Tegra20 and Tegra30 which isn't a very cheap operation.
Replace all readl/writel occurrences in the code with the relaxed versions
since there is no need for the memory-access syncing.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Reset timer's hardware state to ensure that initially it is in a
predictable state.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Tegra132 is 64bit platform and it has the tegra20-timer hardware unit.
Right now the corresponding timer code isn't compiled for ARM64, remove
ifdef'iness from the code and compile tegra20-timer for both 32 and 64 bit
platforms. Also note that like the older generations, Tegra210 has the
microseconds counter, hence the timer_us clocksource is now made available
for Tegra210 as well.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Assign TMR1-4 per-CPU core on 32bit Tegra's in a way it is done for
Tegra210. In a result each core can handle its own timer events, less
code is unique to ARM64 and Tegra's clock events driver now has higher
rating on all Tegra's, replacing the ARM's TWD timer which isn't very
accurate due to the clock rate jitter caused by CPU frequency scaling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Exynos SoCs based on CA7/CA15 have 2 timer interfaces: custom Exynos MCT
(Multi Core Timer) and standard ARM Architected Timers.

There are use cases, where both timer interfaces are used simultanously.
One of such examples is using Exynos MCT for the main system timer and
ARM Architected Timers for the KVM and virtualized guests (KVM requires
arch timers).

Exynos Multi-Core Timer driver (exynos_mct) must be however started
before ARM Architected Timers (arch_timer), because they both share some
common hardware blocks (global system counter) and turning on MCT is
needed to get ARM Architected Timer working properly.

To ensure selecting Exynos MCT as the main system timer, increase MCT
timer rating. To ensure proper starting order of both timers during
suspend/resume cycle, increase MCT hotplug priority over ARM Archictected
Timers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

This is in-kernel C code, so there is no reason to use _BITUL().
Replace it with equivalent BIT().

I added #include <linux/bits.h> explicitly although it has been included
by other headers eventually.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

This adds delay timer functionality to the IXP4xx
timer driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Comply with the licensing rules defined in the documentation.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Somewhere in all the patchsets before, this cleanup got lost.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20190624091539.13512-1-Jason@zx2c4.com

With CONFIG_PROC_FS=n the following warning is emitted:

kernel/time/timer_list.c:361:36: warning: unused variable
'timer_list_sops' [-Wunused-const-variable]
   static const struct seq_operations timer_list_sops = {

Add #ifdef guard around procfs specific code.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/534
Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.com

itimer_delete() uses spin_lock_irqsave() to obtain a `flags' variable
which can then be passed to unlock_timer(). It uses already spin_lock
locking for the structure instead of lock_timer() because it has a timer
which can not be removed by others at this point. The cleanup is always
performed with enabled interrupts.

Use spin_lock_irq() / spin_unlock_irq() so the `flags' variable can be
removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190621143643.25649-3-bigeasy@linutronix.de

itimer_delete() is invoked during do_exit(). At this point it is the
last thread in the group dying and doing the clean up.
Since it is the last thread in the group, there can not be any other
task attempting to lock the itimer which means the NULL assignment (which
avoids lookups in __lock_timer()) is not required.

The assignment and comment was copied in commit 0e568881 ("[PATCH]
fix posix-timers to have proper per-process scope") from
sys_timer_delete() which was/is the syscall interface and requires the
assignment.

Remove the superfluous ->it_signal = NULL assignment.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190621143643.25649-2-bigeasy@linutronix.de

This further unifies the accessors for the fast and coarse functions, so
that the same types of functions are available for each. There was also
a bit of confusion with the documentation, which prior advertised a
function that has never existed. Finally, the vanilla ktime_get_coarse()
was omitted from the API originally, so this fills this oversight.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20190621203249.3909-3-Jason@zx2c4.com

This makes boot uniformly boottime and tai uniformly clocktai, to
address the remaining oversights.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com

While this doesn't actually amount to a real difference, since the macro
evaluates to the same thing, every place else operates on ktime_t using
these functions, so let's not break the pattern.

Fixes: e3ff9c36 ("timekeeping: Repair ktime_get_coarse*() granularity")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20190621203249.3909-1-Jason@zx2c4.com

Pick up upstream fixes for pending changes.

PTI has a significant impact on precision of the MONOTONIC_RAW clock,
which prevents a lot of computers from running the freq-step test.
Increase the maximum acceptable precision for the test to not be skipped
to 500 nanoseconds.

After commit 78b98e3c ("timekeeping/ntp: Determine the multiplier
directly from NTP tick length") the frequency and time errors should be
much smaller. Reduce the maximum acceptable values for the test to pass
to 0.02 ppm and 50 nanoseconds respectively.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Link: https://lkml.kernel.org/r/20190618160612.21957-1-mlichvar@redhat.com

Don't allow the TAI-UTC offset of the system clock to be set by adjtimex()
to a value larger than 100000 seconds.

This prevents an overflow in the conversion to int, prevents the CLOCK_TAI
clock from getting too far ahead of the CLOCK_REALTIME clock, and it is
still large enough to allow leap seconds to be inserted at the maximum rate
currently supported by the kernel (once per day) for the next ~270 years,
however unlikely it is that someone can survive a catastrophic event which
slowed down the rotation of the Earth so much.
Reported-by: Weikang shi <swkhack@gmail.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190618154713.20929-1-mlichvar@redhat.com

Pull x86 fixes from Thomas Gleixner:
 "The accumulated fixes from this and last week:

   - Fix vmalloc TLB flush and map range calculations which lead to
     stale TLBs, spurious faults and other hard to diagnose issues.

   - Use fault_in_pages_writable() for prefaulting the user stack in the
     FPU code as it's less fragile than the current solution

   - Use the PF_KTHREAD flag when checking for a kernel thread instead
     of current->mm as the latter can give the wrong answer due to
     use_mm()

   - Compute the vmemmap size correctly for KASLR and 5-Level paging.
     Otherwise this can end up with a way too small vmemmap area.

   - Make KASAN and 5-level paging work again by making sure that all
     invalid bits are masked out when computing the P4D offset. This
     worked before but got broken recently when the LDT remap area was
     moved.

   - Prevent a NULL pointer dereference in the resource control code
     which can be triggered with certain mount options when the
     requested resource is not available.

   - Enforce ordering of microcode loading vs. perf initialization on
     secondary CPUs. Otherwise perf tries to access a non-existing MSR
     as the boot CPU marked it as available.

   - Don't stop the resource control group walk early otherwise the
     control bitmaps are not updated correctly and become inconsistent.

   - Unbreak kgdb by returning 0 on success from
     kgdb_arch_set_breakpoint() instead of an error code.

   - Add more Icelake CPU model defines so depending changes can be
     queued in other trees"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
  x86/kasan: Fix boot with 5-level paging and KASAN
  x86/fpu: Don't use current->mm to check for a kthread
  x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
  x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
  x86/resctrl: Don't stop walking closids when a locksetup group is found
  x86/fpu: Update kernel's FPU state before using for the fsave header
  x86/mm/KASLR: Compute the size of the vmemmap section properly
  x86/fpu: Use fault_in_pages_writeable() for pre-faulting
  x86/CPU: Add more Icelake model numbers
  mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
  mm/vmalloc: Fix calculation of direct map addr range

Pull timer fixes from Thomas Gleixner:
 "A set of small fixes:

   - Repair the ktime_get_coarse() functions so they actually deliver
     what they are supposed to: tick granular time stamps. The current
     code missed to add the accumulated nanoseconds part of the
     timekeeper so the resulting granularity was 1 second.

   - Prevent the tracer from infinitely recursing into time getter
     functions in the arm architectured timer by marking these functions
     notrace

   - Fix a trivial compiler warning caused by wrong qualifier ordering"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Repair ktime_get_coarse*() granularity
  clocksource/drivers/arm_arch_timer: Don't trace count reader functions
  clocksource/drivers/timer-ti-dm: Change to new style declaration

Pull RAS fixes from Thomas Gleixner:
 "Two small fixes for RAS:

   - Use a proper search algorithm to find the correct element in the
     CEC array. The replacement was a better choice than fixing the
     crash causes by the original search function with horrible duct
     tape.

   - Move the timer based decay function into thread context so it can
     actually acquire the mutex which protects the CEC array to prevent
     corruption"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  RAS/CEC: Convert the timer callback to a workqueue
  RAS/CEC: Fix binary search function

Pull x86 platform driver fixes from Andy Shevchenko:

 - fix a couple of Mellanox driver enumeration issues

 - fix ASUS laptop regression with backlight

 - fix Dell computers that got a wrong mode (tablet versus laptop) after
   resume

* tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
  platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
  platform/x86: intel-vbtn: Report switch events when event wakes device
  platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.2-rc5

  Nothing major, just some small gadget fixes, usb-serial new device
  ids, a few new quirks, and some small fixes for some regressions that
  have been found after the big 5.2-rc1 merge.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: Make sure an alt mode exist before getting its partner
  usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
  usb: gadget: dwc2: fix zlp handling
  usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
  usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
  usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
  usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
  usb: dwc2: Fix DMA cache alignment issues
  usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
  USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
  USB: usb-storage: Add new ID to ums-realtek
  usb: typec: ucsi: ccg: fix memory leak in do_flash
  USB: serial: option: add Telit 0x1260 and 0x1261 compositions
  USB: serial: pl2303: add Allied Telesis VT-Kit3
  USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode

Pull powerpc fixes from Michael Ellerman:
 "One fix for a regression introduced by our 32-bit KASAN support, which
  broke booting on machines with "bootx" early debugging enabled.

  A fix for a bug which broke kexec on 32-bit, introduced by changes to
  the 32-bit STRICT_KERNEL_RWX support in v5.1.

  Finally two fixes going to stable for our THP split/collapse handling,
  discovered by Nick. The first fixes random crashes and/or corruption
  in guests under sufficient load.

  Thanks to: Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu
  Malaterre"

* tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX
  powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate()
  powerpc/64s: Fix THP PMD collapse serialisation
  powerpc: Fix kexec failure on book3s/32