- 05 Mar, 2013 40 commits
-
-
Hans Verkuil authored
The use of the V4L2_CID_JPEG_COMPRESSION_QUALITY control is recommended over the G/S_JPEGCOMP ioctls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Setting the frequency would unmute the card. Fixed the mute handling in the s_frequency code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The device_caps and capabilities fields were swapped. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Theodore Kilgore authored
Instead use v4l2_dbg and v4l2_err. Note that the PDEBUG macro is kept to make this patch-set less invasive, but it is simply a wrapper around v4l2_dbg now. Most of the other changes are there to make the dev parameter for the v4l2_xxx macros available everywhere we do logging. Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Now that sonixj.c has been converted to the control framework it is no longer used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
We forgot to remove that when sonixb was converted to the control framework. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sachin Kamat authored
This patch adds device tree based discovery support to the G2D driver. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Ensure the driver gets always at least its minimum required number of buffers allocated by checking actual number of allocated buffers in vb2_reqbufs(). And free any partially allocated buffer queue with signaling an error to user space. Without this patch applications may wait forever to dequeue a filled buffer, because the hardware didn't even start after VIDIOC_STREAMON, VIDIOC_QBUF calls, due to insufficient number of empty buffers. Reported-by: Alexander Nestorov <alexandernst@gmail.com> Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Kamil Debski authored
Not all drivers use monotonic timestamps. This patch adds a way to set the timestamp type per every queue. In addition, set proper timestamp type in drivers that I am sure that use either MONOTONIC or COPY timestamps. Other drivers will correctly report UNKNOWN timestamp type instead of assuming that all drivers use monotonic timestamps. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Kamil Debski authored
Define video buffer flag for the COPY timestamp. In this case the timestamp value is copied from the OUTPUT to the corresponding CAPTURE buffer. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The spec specifies that setting count to 0 in v4l2_requestbuffers should result in releasing any streaming resources and the stream ownership. Implement this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
This makes it possible to switch to unlocked_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The priv field should be set to 0. In this case the driver abused the priv field for internal housekeeping. Modify the code so priv is no longer used for that purpose. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Add device_caps support to querycap, fill in bus_info correctly and do not set the version field (let the core handle that). Also simplify the s_input ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Also correct the first_init static: this should be part of the stk_camera struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
file->private_data is needed to store the pointer to struct v4l2_fh. So use video_drvdata to get hold of the stk_camera struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
It's a webcam, the STD API is not applicable to webcams. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
And add an extensive comment relating the history of the upside-down handling in this driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Thanks-to: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Tested on my big-endian ppc-based test machine. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Tested on my big-endian ppc-based test machine. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
It's not working reliably if port 3 is enabled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The last set width/height must be preserved as per the spec. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The 417 support doesn't work. Until someone can dig into this driver to figure out why it isn't working the 417 support is disabled. Sometimes you can actually stream a bit, but very soon the whole machine crashes, so something is seriously wrong. For the record, this was not introduced by my recent changes to this driver, it was broken before that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The prefix is generated automatically, so no need to provide it again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Share tuner, frequency, debug and input ioctls with cx231xx-video. These are all shared resources, so no need to implement them again. [mchehab@redhat.com: Fix merge conflict and a checkpatch issue] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Colorspace, field and priv were not set, and sizeimage was calculated using the wrong values (dev->ts1.ts_packet_size and dev->ts1.ts_packet_count can be 0 at module load). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Set the initial standard of subdevices instead of leaving it undefined. Also update the width and height when a new standard is chosen and return -EBUSY when attempting to change the standard while videobuf is busy. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-