- 02 Nov, 2017 19 commits
-
-
Jiri Pirko authored
Since tc_can_offload is always called from block callback or egdev callback, no need to check if ndo_setup_tc exists. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Since the only user, mlx5 driver does the check in mlx5e_setup_tc_block_cb, no need to check here. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
This restores the original behaviour before the block callbacks were introduced. Allow the drivers to do binding of block always, no matter if the NETIF_F_HW_TC feature is on or off. Move the check to the block callback which is called for rule insertion. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
tc_should_offload is no longer used, remove it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Currently the bridge device doesn't generate any notifications upon vlan modifications on itself because it doesn't use the generic bridge notifications. With the recent changes we know if anything was modified in the vlan config thus we can generate a notification when necessary for the bridge device so add support to br_ifinfo_notify() similar to how other combined functions are done - if port is present it takes precedence, otherwise notify about the bridge. I've explicitly marked the locations where the notification should be always for the port by setting bridge to NULL. I've also taken the liberty to rearrange each modified function's local variables in reverse xmas tree as well. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The assignment to kinfo is redundant as this is a duplicate of the initialiation of kinfo a few lines earlier, so it can be removed. The assignment to v_tc_info is never read, so this variable is redundant and can be removed completely. Cleans up two clang warnings: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c:433:34: warning: Value stored to 'kinfo' during its initialization is never read drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c:775:3: warning: Value stored to 'v_tc_info' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The zero value assigned to inst_processed at the end of each iteration of the do-while loop is overwritten on the next iteration and hence it is a redundant assignment and can be removed. Cleans up clang warning: drivers/net/ethernet/cavium/liquidio/request_manager.c:480:3: warning: Value stored to 'inst_processed' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The pointer np is initialized and then re-assigned the same value a few lines later. Remove the redundant duplicated assignment. Cleans up clang warning: drivers/net/ethernet/dlink/dl2k.c:314:25: warning: Value stored to 'np' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
stat set to zero and the value is never read, instead stat is set again in the do-loop. Hence the setting to zero is redundant and can be removed. Cleans up clang warning: drivers/net/wan/wanxl.c:737:2: warning: Value stored to 'stat' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Smooth Cong Wang's bug fix into 'net-next'. Basically put the bulk of the tcf_block_put() logic from 'net' into tcf_block_put_ext(), but after the offload unbind. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== Updates for samples/pktgen This patchset updates samples/pktgen and synchronize with changes maintained in https://github.com/netoptimizer/network-testing/ Features wise Robert Hoo <robert.hu@intel.com> added support for detecting and determining dev NUMA node IRQs, and added a new script named pktgen_sample06_numa_awared_queue_irq_affinity.sh that use these features. Cleanup remove last of the old sample files, as IPv6 is covered by existing sample code. ==================== Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Since commit 0f06a678 ("samples: Add an IPv6 '-6' option to the pktgen scripts") the newer pktgen_sampleXX script does show howto use IPv6 with pktgen. Thus, there is no longer a reason to keep the older sample scripts around. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Like sample05, don't use pktgen clone_skb feature when using 'burst' feature, it is not really needed. This brings the burst users in sync. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert Hoo authored
This script simply does: * Detect $DEV's NUMA node belonging. * Bind each thread (processor of NUMA locality) with each $DEV queue's irq affinity, 1:1 mapping. * How many '-t' threads input determines how many queues will be utilized. If '-f' designates first cpu id, then offset in the NUMA node's cpu list. (Changes by Jesper: allow changing count from cmdline via '-n') Signed-off-by: Robert Hoo <robert.hu@intel.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert Hoo authored
1. given a device, get its NUMA belongings 2. given a device, get its queues' irq numbers. 3. given a NUMA node, get its cpu id list. Signed-off-by: Robert Hoo <robert.hu@intel.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Parvi Kaustubhi says: ==================== enic: Additional ethtool support This patch set allows the user to show or modify rx/tx ring sizes using ethtool. v2: - remove unused variable to fix build warning. - update list of maintainers for cisco vic ethernet nic driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parvi Kaustubhi authored
Add myself to list of maintainers for cisco vic ethernet nic driver. Remove Neel as he left. Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parvi Kaustubhi authored
Add support for displaying and modifying rx and tx ring sizes using ethtool. Also, increasing version to 2.3.0.45 Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parvi Kaustubhi authored
Since we are allowing rx ring size modification, reset fetch index everytime. Otherwise it could have a stale value that can lead to a null pointer dereference. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Nov, 2017 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull signal bugfix from Eric Biederman: "When making the generic support for SIGEMT conditional on the presence of SIGEMT I made a typo that causes it to fail to activate. It was noticed comparatively quickly but the bug report just made it to me today" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Fix name of SIGEMT in #if defined() check
-
Andrew Clayton authored
Commit cc731525 ("signal: Remove kernel interal si_code magic") added a check for SIGMET and NSIGEMT being defined. That SIGMET should in fact be SIGEMT, with SIGEMT being defined in arch/{alpha,mips,sparc}/include/uapi/asm/signal.h This was actually pointed out by BenHutchings in a lwn.net comment here https://lwn.net/Comments/734608/ Fixes: cc731525 ("signal: Remove kernel interal si_code magic") Signed-off-by: Andrew Clayton <andrew@digital-domain.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes that should go into this series: - Regression fix for ide-cd, ensuring that a request is fully initialized. From Hongxu. - Ditto fix for virtio_blk, from Bart. - NVMe fix from Keith, ensuring that we set the right block size on revalidation. If the block size changed, we'd be in trouble without it. - NVMe rdma fix from Sagi, fixing a potential hang while the controller is being removed" * 'for-linus' of git://git.kernel.dk/linux-block: ide:ide-cd: fix kernel panic resulting from missing scsi_req_init nvme: Fix setting logical block format when revalidating virtio_blk: Fix an SG_IO regression nvme-rdma: fix possible hang when issuing commands during ctrl removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix refcounting in xfrm_bundle_lookup() when using a dummy bundle, from Steffen Klassert. 2) Fix crypto header handling in rx data frames in ath10k driver, from Vasanthakumar Thiagarajan. 3) Fix use after free of qdisc when we defer tcp_chain_flush() to a workqueue. From Cong Wang. 4) Fix double free in lapbether driver, from Pan Bian. 5) Sanitize TUNSETSNDBUF values, from Craig Gallek. 6) Fix refcounting when addrconf_permanent_addr() calls ipv6_del_addr(). From Eric Dumazet. 7) Fix MTU probing bug in TCP that goes back to 2007, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: fix tcp_mtu_probe() vs highest_sack ipv6: addrconf: increment ifp refcount before ipv6_del_addr() tun/tap: sanitize TUNSETSNDBUF input mlxsw: i2c: Fix buffer increment counter for write transaction mlxsw: reg: Add high and low temperature thresholds MAINTAINERS: Remove Yotam from mlxfw MAINTAINERS: Update Yotam's E-mail net: hns: set correct return value net: lapbether: fix double free bpf: remove SK_REDIRECT from UAPI net: phy: marvell: Only configure RGMII delays when using RGMII xfrm: Fix GSO for IPsec with GRE tunnel. tc-testing: fix arg to ip command: -s -> -n net_sched: remove tcf_block_put_deferred() l2tp: hold tunnel in pppol2tp_connect() Revert "ath10k: fix napi_poll budget overflow" ath10k: rebuild crypto header in rx data frames wcn36xx: Remove unnecessary rcu_read_unlock in wcn36xx_bss_info_changed xfrm: Clear sk_dst_cache when applying per-socket policy. xfrm: Fix xfrm_dst_cache memleak
-
Vlastimil Babka authored
Syzkaller with KASAN has reported a use-after-free of vma->vm_flags in __do_page_fault() with the following reproducer: mmap(&(0x7f0000000000/0xfff000)=nil, 0xfff000, 0x3, 0x32, 0xffffffffffffffff, 0x0) mmap(&(0x7f0000011000/0x3000)=nil, 0x3000, 0x1, 0x32, 0xffffffffffffffff, 0x0) r0 = userfaultfd(0x0) ioctl$UFFDIO_API(r0, 0xc018aa3f, &(0x7f0000002000-0x18)={0xaa, 0x0, 0x0}) ioctl$UFFDIO_REGISTER(r0, 0xc020aa00, &(0x7f0000019000)={{&(0x7f0000012000/0x2000)=nil, 0x2000}, 0x1, 0x0}) r1 = gettid() syz_open_dev$evdev(&(0x7f0000013000-0x12)="2f6465762f696e7075742f6576656e742300", 0x0, 0x0) tkill(r1, 0x7) The vma should be pinned by mmap_sem, but handle_userfault() might (in a return to userspace scenario) release it and then acquire again, so when we return to __do_page_fault() (with other result than VM_FAULT_RETRY), the vma might be gone. Specifically, per Andrea the scenario is "A return to userland to repeat the page fault later with a VM_FAULT_NOPAGE retval (potentially after handling any pending signal during the return to userland). The return to userland is identified whenever FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in vmf->flags" However, since commit a3c4fb7c ("x86/mm: Fix fault error path using unsafe vma pointer") there is a vma_pkey() read of vma->vm_flags after that point, which can thus become use-after-free. Fix this by moving the read before calling handle_mm_fault(). Reported-by: syzbot <bot+6a5269ce759a7bb12754ed9622076dc93f65a1f6@syzkaller.appspotmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Fixes: 3c4fb7c9c2e ("x86/mm: Fix fault error path using unsafe vma pointer") Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fix from Steve French: "smb3 file name too long fix" * tag 'smb3-file-name-too-long-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: check MaxPathNameComponentLength != 0 before using it
-
Hongxu Jia authored
Since we split the scsi_request out of struct request, while the standard prep_rq_fn builds 10 byte cmds, it missed to invoke scsi_req_init() to initialize certain fields of a scsi_request structure (.__cmd[], .cmd, .cmd_len and .sense_len but no other members of struct scsi_request). An example panic on virtual machines (qemu/virtualbox) to boot from IDE cdrom: ... [ 8.754381] Call Trace: [ 8.755419] blk_peek_request+0x182/0x2e0 [ 8.755863] blk_fetch_request+0x1c/0x40 [ 8.756148] ? ktime_get+0x40/0xa0 [ 8.756385] do_ide_request+0x37d/0x660 [ 8.756704] ? cfq_group_service_tree_add+0x98/0xc0 [ 8.757011] ? cfq_service_tree_add+0x1e5/0x2c0 [ 8.757313] ? ktime_get+0x40/0xa0 [ 8.757544] __blk_run_queue+0x3d/0x60 [ 8.757837] queue_unplugged+0x2f/0xc0 [ 8.758088] blk_flush_plug_list+0x1f4/0x240 [ 8.758362] blk_finish_plug+0x2c/0x40 ... [ 8.770906] RIP: ide_cdrom_prep_fn+0x63/0x180 RSP: ffff92aec018bae8 [ 8.772329] ---[ end trace 6408481e551a85c9 ]--- ... Fixes: 82ed4db4 ("block: split scsi_request out of struct request") Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-11-01 Here's one more bluetooth-next pull request for the 4.15 kernel. - New NFA344A device entry for btusb drvier - Fix race conditions in hci_ldisc - Fix for isochronous interface assignments in btusb driver - A few other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
fix verifier memory leaks Fixes: 638f5b90 ("bpf: reduce verifier memory consumption") Signed-off-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: add hash-filter support to tc-flower offload This series of patches add support to create hash-filters; a.k.a exact-match filters, to tc-flower offload. T6 supports creating ~500K hash-filters in hw and can theoretically be expanded up to ~1 million. Patch 1 fetches and saves the configured hw filter tuple field shifts and filter mask. Patch 2 initializes the driver to use hash-filter configuration. Patch 3 adds support to create hash filters in hw. Patch 4 adds support to delete hash filters in hw. Patch 5 adds support to retrieve filter stats for hash filters. Patch 6 converts the flower table to use rhashtable instead of static hlist. Patch 7 finally adds support to create hash filters via tc-flower offload. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Determine whether the flow classifies as exact-match with respect to 4-tuple and configured tuple mask in hw. If successfully classified as exact-match, offload the flow as hash-filter in hw. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
T6 supports ~500K hash filters and can theoretically climb up to ~1 million hash filters. Preallocated hash table is not efficient in terms of memory usage. So, use rhashtable instead which gives the flexibility to grow based on usage. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Add support to retrieve packet-count and byte-count for hash-filters by retrieving filter-entry appropriately based on whether the request is for hash-filter or not. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Use a combined ulptx work-request to send hash filter deletion request to hw. Hash filter deletion reply is processed on getting cpl_abort_rpl_rss. Release any L2T/SMT/CLIP entries on filter deletion. Also, free up the corresponding filter entry. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Add support to create hash (exact-match) filters based on the value of 'hash' field in ch_filter_specification. Allocate SMT/L2T entries if DMAC-rewrite/SMAC-rewrite is requested. Allocate CLIP entry in case of IPv6 filter. Use cpl_act_open_req[6] to send hash filter create request to hw. Also, the filter tuple is calculated as part of sending this request. Hash-filter reply is processed on getting cpl_act_open_rpl. In case of success, various bits/fields in filter-tcb are set per filter requirement, such as enabling filter hitcnts, and/or various header rewrite operations, such as VLAN-rewrite, NAT or (L3/L4)-rewrite, and SMAC/DMAC-rewrite. In case of failure, clear the filter entry and release any hw resources occupied by it. The patch also moves the functions set_tcb_field, set_tcb_tflag and configure_filter_smac towards beginning of file. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Add support for hash-filter configuration on T6. Also, do basic checks for the related initialization. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Save additional filter tuple field shifts in tp_params based on configured filter tuple fields. Also, save the combined filter tuple mask based on configured filter tuple fields. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Egil Hjelmeland says: ==================== net: dsa: lan9303: Fix STP and flooding issues This patch set finishes the STP support, and fixes flooding issues. Patch 1 fixes a flooding issue in the previous patch set. Patch 2 finishes STP support by adding a ALR entry. Patch 3 prevent duplicate flooding in HW and SW bridge. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Egil Hjelmeland authored
The chip flood broadcast and unknown multicast frames. On receive set skb->offload_fwd_mark to prevent the SW from flooding to the same ports. One exception: Because the ALR is set up to forward STP BPDUs only to CPU, the SW bridge should flood STP BPDUs if local STP is not enabled. This is archived by not setting skb->offload_fwd_mark on STP BPDUs. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Egil Hjelmeland authored
STP BPDUs arriving on user ports must sent to CPU port only, for processing by the SW bridge. Add an ALR entry with STP state override to fix that. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Egil Hjelmeland authored
lan9303_xmit_use_arl() introduced in previous patch set is wrong. The chip flood broadcast and unknown multicast frames. The effect is that broadcasts and multicasts are duplicated on egress. It is not possible to configure the chip to direct unknown multicasts to CPU port only. This means that only unicast frames can be transmitted using ALR lookup. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-