- 01 Jun, 2020 40 commits
-
-
Ferenc Fejes authored
Extending the supported sockopts in bpf_setsockopt with SO_BINDTODEVICE. We call sock_bindtoindex with parameter lock_sk = false in this context because we already owning the socket. Signed-off-by: Ferenc Fejes <fejes@inf.elte.hu> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/4149e304867b8d5a606a305bc59e29b063e51f49.1590871065.git.fejes@inf.elte.hu
-
Ferenc Fejes authored
The sock_bindtoindex intended for kernel wide usage however it will lock the socket regardless of the context. This modification relax this behavior optionally: locking the socket will be optional by calling the sock_bindtoindex with lock_sk = true. The modification applied to all users of the sock_bindtoindex. Signed-off-by: Ferenc Fejes <fejes@inf.elte.hu> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/bee6355da40d9e991b2f2d12b67d55ebb5f5b207.1590871065.git.fejes@inf.elte.hu
-
Denis Efremov authored
buf_prevkey in generic_map_lookup_batch() is allocated with kmalloc(). It's safe to free it with kfree(). Fixes: cb4d03ab ("bpf: Add generic support for lookup batch op") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200601162814.17426-1-efremov@linux.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Alexei Starovoitov authored
John Fastabend says: ==================== If a socket is running a BPF_SK_SKB_SREAM_VERDICT program and KTLS is enabled the data stream may be broken if both TLS stream parser and BPF stream parser try to handle data. Fix this here by making KTLS stream parser run first to ensure TLS messages are received correctly and then calling the verdict program. This analogous to how we handle a similar conflict on the TX side. Note, this is a fix but it doesn't make sense to push this late to bpf tree so targeting bpf-next and keeping fixes tags. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Alexei Starovoitov authored
Sync bpf.h into tool/include/uapi/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
This adds a test for bpf ingress policy. To ensure data writes happen as expected with extra TLS headers we run these tests with data verification enabled by default. This will test receive packets have "PASS" stamped into the front of the payload. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079363965.5745.3390806911628980210.stgit@john-Precision-5820-TowerSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Alexei Starovoitov authored
David Ahern says: ==================== Implementation of Daniel's proposal for allowing DEVMAP entries to be a device index, program fd pair. Programs are run after XDP_REDIRECT and have access to both Rx device and Tx device. v4 - moved struct bpf_devmap_val from uapi to devmap.c, named the union and dropped the prefix from the elements - Jesper - fixed 2 bugs in selftests v3 - renamed struct to bpf_devmap_val - used offsetofend to check for expected map size, modification of Toke's comment - check for explicit value sizes - adjusted switch statement in dev_map_run_prog per Andrii's comment - changed SEC shortcut to xdp_devmap - changed selftests to use skeleton and new map declaration v2 - moved dev_map_ext_val definition to uapi to formalize the API for devmap extensions; add bpf_ prefix to the prog_fd and prog_id entries - changed devmap code to handle struct in a way that it can support future extensions - fixed subject in libbpf patch v1 - fixed prog put on invalid program - Toke - changed write value from id to fd per Toke's comments about capabilities - add test cases ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-TowerSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
David Ahern authored
Add tests to verify ability to add an XDP program to a entry in a DEVMAP. Add negative tests to show DEVMAP programs can not be attached to devices as a normal XDP program, and accesses to egress_ifindex require BPF_XDP_DEVMAP attach type. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-6-dsahern@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-TowerSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
David Ahern authored
Support SEC("xdp_devmap*") as a short cut for loading the program with type BPF_PROG_TYPE_XDP and expected attach type BPF_XDP_DEVMAP. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-5-dsahern@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
David Ahern authored
Add xdp_txq_info as the Tx counterpart to xdp_rxq_info. At the moment only the device is added. Other fields (queue_index) can be added as use cases arise. >From a UAPI perspective, add egress_ifindex to xdp context for bpf programs to see the Tx device. Update the verifier to only allow accesses to egress_ifindex by XDP programs with BPF_XDP_DEVMAP expected attach type. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-4-dsahern@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
David Ahern authored
Add BPF_XDP_DEVMAP attach type for use with programs associated with a DEVMAP entry. Allow DEVMAPs to associate a program with a device entry by adding a bpf_prog.fd to 'struct bpf_devmap_val'. Values read show the program id, so the fd and id are a union. bpf programs can get access to the struct via vmlinux.h. The program associated with the fd must have type XDP with expected attach type BPF_XDP_DEVMAP. When a program is associated with a device index, the program is run on an XDP_REDIRECT and before the buffer is added to the per-cpu queue. At this point rxq data is still valid; the next patch adds tx device information allowing the prorgam to see both ingress and egress device indices. XDP generic is skb based and XDP programs do not work with skb's. Block the use case by walking maps used by a program that is to be attached via xdpgeneric and fail if any of them are DEVMAP / DEVMAP_HASH with Block attach of BPF_XDP_DEVMAP programs to devices. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-3-dsahern@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Yonghong Song authored
In bpf_seq_printf() helper, when user specified a "%s" in the format string, strncpy_from_unsafe() is used to read the actual string to a buffer. The string could be a format string or a string in the kernel data structure. It is really unlikely that the string will reside in the user memory. This is different from Commit b2a5212f ("bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier") which still used strncpy_from_unsafe() for "%s" to preserve the old behavior. If in the future, bpf_seq_printf() indeed needs to read user memory, we can implement "%pus" format string. Based on discussion in [1], if the intent is to read kernel memory, strncpy_from_unsafe_strict() should be used. So this patch changed to use strncpy_from_unsafe_strict(). [1]: https://lore.kernel.org/bpf/20200521152301.2587579-1-hch@lst.de/T/ Fixes: 492e639f ("bpf: Add bpf_seq_printf and bpf_seq_write helpers") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/bpf/20200529004810.3352219-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
David Ahern authored
Add 'struct bpf_devmap_val' to formalize the expected values that can be passed in for a DEVMAP. Update devmap code to use the struct. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-2-dsahern@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Amritha Nambiar authored
Add "rx_queue_mapping" to bpf_sock. This gives read access for the existing field (sk_rx_queue_mapping) of struct sock from bpf_sock. Semantics for the bpf_sock rx_queue_mapping access are similar to sk_rx_queue_get(), i.e the value NO_QUEUE_MAPPING is not allowed and -1 is returned in that case. This is useful for transmit queue selection based on the received queue index which is cached in the socket in the receive path. v3: Addressed review comments to add usecase in patch description, and fixed default value for rx_queue_mapping. v2: fixed build error for CONFIG_XPS wrapping, reported by kbuild test robot <lkp@intel.com> Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Andrii Nakryiko says: ==================== Implement a new BPF ring buffer, as presented at BPF virtual conference ([0]). It presents an alternative to perf buffer, following its semantics closely, but allowing sharing same instance of ring buffer across multiple CPUs efficiently. Most patches have extensive commentary explaining various aspects, so I'll keep cover letter short. Overall structure of the patch set: - patch #1 adds BPF ring buffer implementation to kernel and necessary verifier support; - patch #2 adds libbpf consumer implementation for BPF ringbuf; - patch #3 adds selftest, both for single BPF ring buf use case, as well as using it with array/hash of maps; - patch #4 adds extensive benchmarks and provide some analysis in commit message, it builds upon selftests/bpf's bench runner. - patch #5 adds most of patch #1 commit message as a doc under Documentation/bpf/ringbuf.rst. Litmus tests, validating consumer/producer protocols and memory orderings, were moved out as discussed in [1] and are going to be posted against -rcu tree and put under Documentation/litmus-tests/bpf-rb. [0] https://docs.google.com/presentation/d/18ITdg77Bj6YDOH2LghxrnFxiPWe0fAqcmJY95t_qr0w [1] https://lkml.org/lkml/2020/5/22/1011 v3->v4: - fix ringbuf freeing (vunmap, __free_page); verified with a trivial loop creating and closing ringbuf map endlessly (Daniel); v2->v3: - dropped unnecessary smp_wmb() (Paul); - verifier reference type enhancement patch was dropped (Alexei); - better verifier message for various memory access checks (Alexei); - clarified a bit roundup_len() bit shifting (Alexei); - converted doc to .rst (Alexei); - fixed warning on 32-bit arches regarding tautological ring area size check. v1->v2: - commit()/discard()/output() accept flags (NO_WAKEUP/FORCE_WAKEUP) (Stanislav); - bpf_ringbuf_query() added, returning available data size, ringbuf size, consumer/producer positions, needed to implement smarter notification policy (Stanislav); - added ringbuf UAPI constants to include/uapi/linux/bpf.h (Jonathan); - fixed sample size check, added proper ringbuf size check (Jonathan, Alexei); - wake_up_all() is done through irq_work (Alexei); - consistent use of smp_load_acquire/smp_store_release, no READ_ONCE/WRITE_ONCE (Alexei); - added Documentation/bpf/ringbuf.txt (Stanislav); - updated litmus test with smp_load_acquire/smp_store_release changes; - added ring_buffer__consume() API to libbpf for busy-polling; - ring_buffer__poll() on success returns number of records consumed; - fixed EPOLL notifications, don't assume available data, done similarly to perfbuf's implementation; - both ringbuf and perfbuf now have --rb-sampled mode, instead of pb-raw/pb-custom mode, updated benchmark results; - extended ringbuf selftests to validate epoll logic/manual notification logic, as well as bpf_ringbuf_query(). ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Anton Protopopov authored
For write-only stacks and queues bpf_map_update_elem should be allowed, but bpf_map_lookup_elem and bpf_map_lookup_and_delete_elem should fail with EPERM. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-6-a.s.protopopov@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Add commit description from patch #1 as a stand-alone documentation under Documentation/bpf, as it might be more convenient format, in long term perspective. Suggested-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200529075424.3139988-6-andriin@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Extend bench framework with ability to have benchmark-provided child argument parser for custom benchmark-specific parameters. This makes bench generic code modular and independent from any specific benchmark. Also implement a set of benchmarks for new BPF ring buffer and existing perf buffer. 4 benchmarks were implemented: 2 variations for each of BPF ringbuf and perfbuf:, - rb-libbpf utilizes stock libbpf ring_buffer manager for reading data; - rb-custom implements custom ring buffer setup and reading code, to eliminate overheads inherent in generic libbpf code due to callback functions and the need to update consumer position after each consumed record, instead of batching updates (due to pessimistic assumption that user callback might take long time and thus could unnecessarily hold ring buffer space for too long); - pb-libbpf uses stock libbpf perf_buffer code with all the default settings, though uses higher-performance raw event callback to minimize unnecessary overhead; - pb-custom implements its own custom consumer code to minimize any possible overhead of generic libbpf implementation and indirect function calls. All of the test support default, no data notification skipped, mode, as well as sampled mode (with --rb-sampled flag), which allows to trigger epoll notification less frequently and reduce overhead. As will be shown, this mode is especially critical for perf buffer, which suffers from high overhead of wakeups in kernel. Otherwise, all benchamrks implement similar way to generate a batch of records by using fentry/sys_getpgid BPF program, which pushes a bunch of records in a tight loop and records number of successful and dropped samples. Each record is a small 8-byte integer, to minimize the effect of memory copying with bpf_perf_event_output() and bpf_ringbuf_output(). Benchmarks that have only one producer implement optional back-to-back mode, in which record production and consumption is alternating on the same CPU. This is the highest-throughput happy case, showing ultimate performance achievable with either BPF ringbuf or perfbuf. All the below scenarios are implemented in a script in benchs/run_bench_ringbufs.sh. Tests were performed on 28-core/56-thread Intel Xeon CPU E5-2680 v4 @ 2.40GHz CPU. Single-producer, parallel producer ================================== rb-libbpf 12.054 ± 0.320M/s (drops 0.000 ± 0.000M/s) rb-custom 8.158 ± 0.118M/s (drops 0.001 ± 0.003M/s) pb-libbpf 0.931 ± 0.007M/s (drops 0.000 ± 0.000M/s) pb-custom 0.965 ± 0.003M/s (drops 0.000 ± 0.000M/s) Single-producer, parallel producer, sampled notification ======================================================== rb-libbpf 11.563 ± 0.067M/s (drops 0.000 ± 0.000M/s) rb-custom 15.895 ± 0.076M/s (drops 0.000 ± 0.000M/s) pb-libbpf 9.889 ± 0.032M/s (drops 0.000 ± 0.000M/s) pb-custom 9.866 ± 0.028M/s (drops 0.000 ± 0.000M/s) Single producer on one CPU, consumer on another one, both running at full speed. Curiously, rb-libbpf has higher throughput than objectively faster (due to more lightweight consumer code path) rb-custom. It appears that faster consumer causes kernel to send notifications more frequently, because consumer appears to be caught up more frequently. Performance of perfbuf suffers from default "no sampling" policy and huge overhead that causes. In sampled mode, rb-custom is winning very significantly eliminating too frequent in-kernel wakeups, the gain appears to be more than 2x. Perf buffer achieves even more impressive wins, compared to stock perfbuf settings, with 10x improvements in throughput with 1:500 sampling rate. The trade-off is that with sampling, application might not get next X events until X+1st arrives, which is not always acceptable. With steady influx of events, though, this shouldn't be a problem. Overall, single-producer performance of ring buffers seems to be better no matter the sampled/non-sampled modes, but it especially beats ring buffer without sampling due to its adaptive notification approach. Single-producer, back-to-back mode ================================== rb-libbpf 15.507 ± 0.247M/s (drops 0.000 ± 0.000M/s) rb-libbpf-sampled 14.692 ± 0.195M/s (drops 0.000 ± 0.000M/s) rb-custom 21.449 ± 0.157M/s (drops 0.000 ± 0.000M/s) rb-custom-sampled 20.024 ± 0.386M/s (drops 0.000 ± 0.000M/s) pb-libbpf 1.601 ± 0.015M/s (drops 0.000 ± 0.000M/s) pb-libbpf-sampled 8.545 ± 0.064M/s (drops 0.000 ± 0.000M/s) pb-custom 1.607 ± 0.022M/s (drops 0.000 ± 0.000M/s) pb-custom-sampled 8.988 ± 0.144M/s (drops 0.000 ± 0.000M/s) Here we test a back-to-back mode, which is arguably best-case scenario both for BPF ringbuf and perfbuf, because there is no contention and for ringbuf also no excessive notification, because consumer appears to be behind after the first record. For ringbuf, custom consumer code clearly wins with 21.5 vs 16 million records per second exchanged between producer and consumer. Sampled mode actually hurts a bit due to slightly slower producer logic (it needs to fetch amount of data available to decide whether to skip or force notification). Perfbuf with wakeup sampling gets 5.5x throughput increase, compared to no-sampling version. There also doesn't seem to be noticeable overhead from generic libbpf handling code. Perfbuf back-to-back, effect of sample rate =========================================== pb-sampled-1 1.035 ± 0.012M/s (drops 0.000 ± 0.000M/s) pb-sampled-5 3.476 ± 0.087M/s (drops 0.000 ± 0.000M/s) pb-sampled-10 5.094 ± 0.136M/s (drops 0.000 ± 0.000M/s) pb-sampled-25 7.118 ± 0.153M/s (drops 0.000 ± 0.000M/s) pb-sampled-50 8.169 ± 0.156M/s (drops 0.000 ± 0.000M/s) pb-sampled-100 8.887 ± 0.136M/s (drops 0.000 ± 0.000M/s) pb-sampled-250 9.180 ± 0.209M/s (drops 0.000 ± 0.000M/s) pb-sampled-500 9.353 ± 0.281M/s (drops 0.000 ± 0.000M/s) pb-sampled-1000 9.411 ± 0.217M/s (drops 0.000 ± 0.000M/s) pb-sampled-2000 9.464 ± 0.167M/s (drops 0.000 ± 0.000M/s) pb-sampled-3000 9.575 ± 0.273M/s (drops 0.000 ± 0.000M/s) This benchmark shows the effect of event sampling for perfbuf. Back-to-back mode for highest throughput. Just doing every 5th record notification gives 3.5x speed up. 250-500 appears to be the point of diminishing return, with almost 9x speed up. Most benchmarks use 500 as the default sampling for pb-raw and pb-custom. Ringbuf back-to-back, effect of sample rate =========================================== rb-sampled-1 1.106 ± 0.010M/s (drops 0.000 ± 0.000M/s) rb-sampled-5 4.746 ± 0.149M/s (drops 0.000 ± 0.000M/s) rb-sampled-10 7.706 ± 0.164M/s (drops 0.000 ± 0.000M/s) rb-sampled-25 12.893 ± 0.273M/s (drops 0.000 ± 0.000M/s) rb-sampled-50 15.961 ± 0.361M/s (drops 0.000 ± 0.000M/s) rb-sampled-100 18.203 ± 0.445M/s (drops 0.000 ± 0.000M/s) rb-sampled-250 19.962 ± 0.786M/s (drops 0.000 ± 0.000M/s) rb-sampled-500 20.881 ± 0.551M/s (drops 0.000 ± 0.000M/s) rb-sampled-1000 21.317 ± 0.532M/s (drops 0.000 ± 0.000M/s) rb-sampled-2000 21.331 ± 0.535M/s (drops 0.000 ± 0.000M/s) rb-sampled-3000 21.688 ± 0.392M/s (drops 0.000 ± 0.000M/s) Similar benchmark for ring buffer also shows a great advantage (in terms of throughput) of skipping notifications. Skipping every 5th one gives 4x boost. Also similar to perfbuf case, 250-500 seems to be the point of diminishing returns, giving roughly 20x better results. Keep in mind, for this test, notifications are controlled manually with BPF_RB_NO_WAKEUP and BPF_RB_FORCE_WAKEUP. As can be seen from previous benchmarks, adaptive notifications based on consumer's positions provides same (or even slightly better due to simpler load generator on BPF side) benefits in favorable back-to-back scenario. Over zealous and fast consumer, which is almost always caught up, will make thoughput numbers smaller. That's the case when manual notification control might prove to be extremely beneficial. Ringbuf back-to-back, reserve+commit vs output ============================================== reserve 22.819 ± 0.503M/s (drops 0.000 ± 0.000M/s) output 18.906 ± 0.433M/s (drops 0.000 ± 0.000M/s) Ringbuf sampled, reserve+commit vs output ========================================= reserve-sampled 15.350 ± 0.132M/s (drops 0.000 ± 0.000M/s) output-sampled 14.195 ± 0.144M/s (drops 0.000 ± 0.000M/s) BPF ringbuf supports two sets of APIs with various usability and performance tradeoffs: bpf_ringbuf_reserve()+bpf_ringbuf_commit() vs bpf_ringbuf_output(). This benchmark clearly shows superiority of reserve+commit approach, despite using a small 8-byte record size. Single-producer, consumer/producer competing on the same CPU, low batch count ============================================================================= rb-libbpf 3.045 ± 0.020M/s (drops 3.536 ± 0.148M/s) rb-custom 3.055 ± 0.022M/s (drops 3.893 ± 0.066M/s) pb-libbpf 1.393 ± 0.024M/s (drops 0.000 ± 0.000M/s) pb-custom 1.407 ± 0.016M/s (drops 0.000 ± 0.000M/s) This benchmark shows one of the worst-case scenarios, in which producer and consumer do not coordinate *and* fight for the same CPU. No batch count and sampling settings were able to eliminate drops for ringbuffer, producer is just too fast for consumer to keep up. But ringbuf and perfbuf still able to pass through quite a lot of messages, which is more than enough for a lot of applications. Ringbuf, multi-producer contention ================================== rb-libbpf nr_prod 1 10.916 ± 0.399M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 2 4.931 ± 0.030M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 3 4.880 ± 0.006M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 4 3.926 ± 0.004M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 8 4.011 ± 0.004M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 12 3.967 ± 0.016M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 16 2.604 ± 0.030M/s (drops 0.001 ± 0.002M/s) rb-libbpf nr_prod 20 2.233 ± 0.003M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 24 2.085 ± 0.015M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 28 2.055 ± 0.004M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 32 1.962 ± 0.004M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 36 2.089 ± 0.005M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 40 2.118 ± 0.006M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 44 2.105 ± 0.004M/s (drops 0.000 ± 0.000M/s) rb-libbpf nr_prod 48 2.120 ± 0.058M/s (drops 0.000 ± 0.001M/s) rb-libbpf nr_prod 52 2.074 ± 0.024M/s (drops 0.007 ± 0.014M/s) Ringbuf uses a very short-duration spinlock during reservation phase, to check few invariants, increment producer count and set record header. This is the biggest point of contention for ringbuf implementation. This benchmark evaluates the effect of multiple competing writers on overall throughput of a single shared ringbuffer. Overall throughput drops almost 2x when going from single to two highly-contended producers, gradually dropping with additional competing producers. Performance drop stabilizes at around 20 producers and hovers around 2mln even with 50+ fighting producers, which is a 5x drop compared to non-contended case. Good kernel implementation in kernel helps maintain decent performance here. Note, that in the intended real-world scenarios, it's not expected to get even close to such a high levels of contention. But if contention will become a problem, there is always an option of sharding few ring buffers across a set of CPUs. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200529075424.3139988-5-andriin@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Both singleton BPF ringbuf and BPF ringbuf with map-in-map use cases are tested. Also reserve+submit/discards and output variants of API are validated. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200529075424.3139988-4-andriin@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Declaring and instantiating BPF ring buffer doesn't require any changes to libbpf, as it's just another type of maps. So using existing BTF-defined maps syntax with __uint(type, BPF_MAP_TYPE_RINGBUF) and __uint(max_elements, <size-of-ring-buf>) is all that's necessary to create and use BPF ring buffer. This patch adds BPF ring buffer consumer to libbpf. It is very similar to perf_buffer implementation in terms of API, but also attempts to fix some minor problems and inconveniences with existing perf_buffer API. ring_buffer support both single ring buffer use case (with just using ring_buffer__new()), as well as allows to add more ring buffers, each with its own callback and context. This allows to efficiently poll and consume multiple, potentially completely independent, ring buffers, using single epoll instance. The latter is actually a problem in practice for applications that are using multiple sets of perf buffers. They have to create multiple instances for struct perf_buffer and poll them independently or in a loop, each approach having its own problems (e.g., inability to use a common poll timeout). struct ring_buffer eliminates this problem by aggregating many independent ring buffer instances under the single "ring buffer manager". Second, perf_buffer's callback can't return error, so applications that need to stop polling due to error in data or data signalling the end, have to use extra mechanisms to signal that polling has to stop. ring_buffer's callback can return error, which will be passed through back to user code and can be acted upon appropariately. Two APIs allow to consume ring buffer data: - ring_buffer__poll(), which will wait for data availability notification and will consume data only from reported ring buffer(s); this API allows to efficiently use resources by reading data only when it becomes available; - ring_buffer__consume(), will attempt to read new records regardless of data availablity notification sub-system. This API is useful for cases when lowest latency is required, in expense of burning CPU resources. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200529075424.3139988-3-andriin@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
This commit adds a new MPSC ring buffer implementation into BPF ecosystem, which allows multiple CPUs to submit data to a single shared ring buffer. On the consumption side, only single consumer is assumed. Motivation ---------- There are two distinctive motivators for this work, which are not satisfied by existing perf buffer, which prompted creation of a new ring buffer implementation. - more efficient memory utilization by sharing ring buffer across CPUs; - preserving ordering of events that happen sequentially in time, even across multiple CPUs (e.g., fork/exec/exit events for a task). These two problems are independent, but perf buffer fails to satisfy both. Both are a result of a choice to have per-CPU perf ring buffer. Both can be also solved by having an MPSC implementation of ring buffer. The ordering problem could technically be solved for perf buffer with some in-kernel counting, but given the first one requires an MPSC buffer, the same solution would solve the second problem automatically. Semantics and APIs ------------------ Single ring buffer is presented to BPF programs as an instance of BPF map of type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately rejected. One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce "same CPU only" rule. This would be more familiar interface compatible with existing perf buffer use in BPF, but would fail if application needed more advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses this with current approach. Additionally, given the performance of BPF ringbuf, many use cases would just opt into a simple single ring buffer shared among all CPUs, for which current approach would be an overkill. Another approach could introduce a new concept, alongside BPF map, to represent generic "container" object, which doesn't necessarily have key/value interface with lookup/update/delete operations. This approach would add a lot of extra infrastructure that has to be built for observability and verifier support. It would also add another concept that BPF developers would have to familiarize themselves with, new syntax in libbpf, etc. But then would really provide no additional benefits over the approach of using a map. BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so doesn't few other map types (e.g., queue and stack; array doesn't support delete, etc). The approach chosen has an advantage of re-using existing BPF map infrastructure (introspection APIs in kernel, libbpf support, etc), being familiar concept (no need to teach users a new type of object in BPF program), and utilizing existing tooling (bpftool). For common scenario of using a single ring buffer for all CPUs, it's as simple and straightforward, as would be with a dedicated "container" object. On the other hand, by being a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to implement a wide variety of topologies, from one ring buffer for each CPU (e.g., as a replacement for perf buffer use cases), to a complicated application hashing/sharding of ring buffers (e.g., having a small pool of ring buffers with hashed task's tgid being a look up key to preserve order, but reduce contention). Key and value sizes are enforced to be zero. max_entries is used to specify the size of ring buffer and has to be a power of 2 value. There are a bunch of similarities between perf buffer (BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics: - variable-length records; - if there is no more space left in ring buffer, reservation fails, no blocking; - memory-mappable data area for user-space applications for ease of consumption and high performance; - epoll notifications for new incoming data; - but still the ability to do busy polling for new data to achieve the lowest latency, if necessary. BPF ringbuf provides two sets of APIs to BPF programs: - bpf_ringbuf_output() allows to *copy* data from one place to a ring buffer, similarly to bpf_perf_event_output(); - bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs split the whole process into two steps. First, a fixed amount of space is reserved. If successful, a pointer to a data inside ring buffer data area is returned, which BPF programs can use similarly to a data inside array/hash maps. Once ready, this piece of memory is either committed or discarded. Discard is similar to commit, but makes consumer ignore the record. bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because record has to be prepared in some other place first. But it allows to submit records of the length that's not known to verifier beforehand. It also closely matches bpf_perf_event_output(), so will simplify migration significantly. bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory pointer directly to ring buffer memory. In a lot of cases records are larger than BPF stack space allows, so many programs have use extra per-CPU array as a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs completely. But in exchange, it only allows a known constant size of memory to be reserved, such that verifier can verify that BPF program can't access memory outside its reserved record space. bpf_ringbuf_output(), while slightly slower due to extra memory copy, covers some use cases that are not suitable for bpf_ringbuf_reserve(). The difference between commit and discard is very small. Discard just marks a record as discarded, and such records are supposed to be ignored by consumer code. Discard is useful for some advanced use-cases, such as ensuring all-or-nothing multi-record submission, or emulating temporary malloc()/free() within single BPF program invocation. Each reserved record is tracked by verifier through existing reference-tracking logic, similar to socket ref-tracking. It is thus impossible to reserve a record, but forget to submit (or discard) it. bpf_ringbuf_query() helper allows to query various properties of ring buffer. Currently 4 are supported: - BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer; - BPF_RB_RING_SIZE returns the size of ring buffer; - BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of consumer/producer, respectively. Returned values are momentarily snapshots of ring buffer state and could be off by the time helper returns, so this should be used only for debugging/reporting reasons or for implementing various heuristics, that take into account highly-changeable nature of some of those characteristics. One such heuristic might involve more fine-grained control over poll/epoll notifications about new data availability in ring buffer. Together with BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers, it allows BPF program a high degree of control and, e.g., more efficient batched notifications. Default self-balancing strategy, though, should be adequate for most applications and will work reliable and efficiently already. Design and implementation ------------------------- This reserve/commit schema allows a natural way for multiple producers, either on different CPUs or even on the same CPU/in the same BPF program, to reserve independent records and work with them without blocking other producers. This means that if BPF program was interruped by another BPF program sharing the same ring buffer, they will both get a record reserved (provided there is enough space left) and can work with it and submit it independently. This applies to NMI context as well, except that due to using a spinlock during reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock, in which case reservation will fail even if ring buffer is not full. The ring buffer itself internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters (which might wrap around on 32-bit architectures, that's not a problem): - consumer counter shows up to which logical position consumer consumed the data; - producer counter denotes amount of data reserved by all producers. Each time a record is reserved, producer that "owns" the record will successfully advance producer counter. At that point, data is still not yet ready to be consumed, though. Each record has 8 byte header, which contains the length of reserved record, as well as two extra bits: busy bit to denote that record is still being worked on, and discard bit, which might be set at commit time if record is discarded. In the latter case, consumer is supposed to skip the record and move on to the next one. Record header also encodes record's relative offset from the beginning of ring buffer data area (in pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only the pointer to the record itself, without requiring also the pointer to ring buffer itself. Ring buffer memory location will be restored from record metadata header. This significantly simplifies verifier, as well as improving API usability. Producer counter increments are serialized under spinlock, so there is a strict ordering between reservations. Commits, on the other hand, are completely lockless and independent. All records become available to consumer in the order of reservations, but only after all previous records where already committed. It is thus possible for slow producers to temporarily hold off submitted records, that were reserved later. Reservation/commit/consumer protocol is verified by litmus tests in Documentation/litmus-test/bpf-rb. One interesting implementation bit, that significantly simplifies (and thus speeds up as well) implementation of both producers and consumers is how data area is mapped twice contiguously back-to-back in the virtual memory. This allows to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. See comment and a simple ASCII diagram showing this visually in bpf_ringbuf_area_alloc(). Another feature that distinguishes BPF ringbuf from perf ring buffer is a self-pacing notifications of new data being availability. bpf_ringbuf_commit() implementation will send a notification of new record being available after commit only if consumer has already caught up right up to the record being committed. If not, consumer still has to catch up and thus will see new data anyways without needing an extra poll notification. Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that this allows to achieve a very high throughput without having to resort to tricks like "notify only every Nth sample", which are necessary with perf buffer. For extreme cases, when BPF program wants more manual control of notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data availability, but require extra caution and diligence in using this API. Comparison to alternatives -------------------------- Before considering implementing BPF ring buffer from scratch existing alternatives in kernel were evaluated, but didn't seem to meet the needs. They largely fell into few categores: - per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations outlined above (ordering and memory consumption); - linked list-based implementations; while some were multi-producer designs, consuming these from user-space would be very complicated and most probably not performant; memory-mapping contiguous piece of memory is simpler and more performant for user-space consumers; - io_uring is SPSC, but also requires fixed-sized elements. Naively turning SPSC queue into MPSC w/ lock would have subpar performance compared to locked reserve + lockless commit, as with BPF ring buffer. Fixed sized elements would be too limiting for BPF programs, given existing BPF programs heavily rely on variable-sized perf buffer already; - specialized implementations (like a new printk ring buffer, [0]) with lots of printk-specific limitations and implications, that didn't seem to fit well for intended use with BPF programs. [0] https://lwn.net/Articles/779550/Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
The map_lookup_and_delete_elem() function should check for both FMODE_CAN_WRITE and FMODE_CAN_READ permissions because it returns a map element to user space. Fixes: bd513cd0 ("bpf: add MAP_LOOKUP_AND_DELETE_ELEM syscall") Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-5-a.s.protopopov@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
Make comments inside the test_map_rdonly and test_map_wronly tests consistent with logic. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-4-a.s.protopopov@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
The test_map_rdonly and test_map_wronly tests should close file descriptors which they open. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-3-a.s.protopopov@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
Trivial fix to a typo in the test_map_wronly test: "read" -> "write" Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-2-a.s.protopopov@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Eelco Chaudron authored
In case the cpu_bufs are sparsely allocated they are not all free'ed. These changes will fix this. Fixes: fb84b822 ("libbpf: add perf buffer API") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159056888305.330763.9684536967379110349.stgit@ebuildSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
Lets test using probe* in SCHED_CLS network programs as well just to be sure these keep working. Its cheap to add the extra test and provides a second context to test outside of sk_msg after we generalized probe* helpers to all networking types. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159033911685.12355.15951980509828906214.stgit@john-Precision-5820-TowerSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
The test itself is not particularly useful but it encodes a common pattern we have. Namely do a sk storage lookup then depending on data here decide if we need to do more work or alternatively allow packet to PASS. Then if we need to do more work consult task_struct for more information about the running task. Finally based on this additional information drop or pass the data. In this case the suspicious check is not so realisitic but it encodes the general pattern and uses the helpers so we test the workflow. This is a load test to ensure verifier correctly handles this case. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159033909665.12355.6166415847337547879.stgit@john-Precision-5820-TowerSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
Add helpers to use local socket storage. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159033907577.12355.14740125020572756560.stgit@john-Precision-5820-TowerSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
Often it is useful when applying policy to know something about the task. If the administrator has CAP_SYS_ADMIN rights then they can use kprobe + networking hook and link the two programs together to accomplish this. However, this is a bit clunky and also means we have to call both the network program and kprobe program when we could just use a single program and avoid passing metadata through sk_msg/skb->cb, socket, maps, etc. To accomplish this add probe_* helpers to bpf_base_func_proto programs guarded by a perfmon_capable() check. New supported helpers are the following, BPF_FUNC_get_current_task BPF_FUNC_probe_read_user BPF_FUNC_probe_read_kernel BPF_FUNC_probe_read_user_str BPF_FUNC_probe_read_kernel_str Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159033905529.12355.4368381069655254932.stgit@john-Precision-5820-TowerSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
Add these generic helpers that may be useful to use from sk_msg programs. The helpers do not depend on ctx so we can simply add them here, BPF_FUNC_perf_event_output BPF_FUNC_get_current_uid_gid BPF_FUNC_get_current_pid_tgid BPF_FUNC_get_current_cgroup_id BPF_FUNC_get_current_ancestor_cgroup_id BPF_FUNC_get_cgroup_classid Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159033903373.12355.15489763099696629346.stgit@john-Precision-5820-TowerSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Yauheni Kaliuta authored
Since dynamic symbols are used for dynamic linking it makes sense to use them (readelf --dyn-syms) for abi check. Found with some configuration on powerpc where linker puts local *.plt_call.* symbols into .so. Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200525061846.16524-1-yauheni.kaliuta@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Chris Packham authored
Change 'handeled' to 'handled'. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525230025.14470-1-chris.packham@alliedtelesis.co.nzSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Nikolay Borisov authored
Current 'make install' results in only pkg-config and library binaries being installed. For consistency also install headers as part of "make install" Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200526174612.5447-1-nborisov@suse.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Eelco Chaudron authored
This new API, perf_buffer__consume, can be used as follows: - When you have a perf ring where wakeup_events is higher than 1, and you have remaining data in the rings you would like to pull out on exit (or maybe based on a timeout). - For low latency cases where you burn a CPU that constantly polls the queues. Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159048487929.89441.7465713173442594608.stgit@ebuildSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Lukas Bulwahn authored
Commit 2b43470a ("xsk: Introduce AF_XDP buffer allocation API") added a new header file include/net/xsk_buff_pool.h, but commit 28bee21d ("MAINTAINERS, xsk: Update AF_XDP section after moves/adds") added a file entry referring to include/net/xsk_buffer_pool.h. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: include/net/xsk_buffer_pool.h Adjust the entry in XDP SOCKETS to the actual file name. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525141553.7035-1-lukas.bulwahn@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Jakub Sitnicki authored
System calls encode returned errors as negative values. Fix a typo that breaks this convention for bpf(LINK_UPDATE) when bpf_link doesn't support update operation. Fixes: f9d04127 ("bpf: Refactor bpf_link update handling") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525122928.1164495-1-jakub@cloudflare.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Tobias Klauser authored
btf__parse_raw and btf__parse_elf return negative error numbers wrapped in an ERR_PTR, so the extracted value needs to be negated before passing them to strerror which expects a positive error number. Before: Error: failed to load BTF from .../vmlinux: Unknown error -2 After: Error: failed to load BTF from .../vmlinux: No such file or directory Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525135421.4154-1-tklauser@distanz.chSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-