Current value of nest_level, assigned from net_device lower_level value,
does not reflect the actual number of vlan headers, needed to pop.
For ex., if we have untagged ingress traffic sended over vlan devices,
instead of one pop action, driver will perform two pop actions.
To fix that, calculate nest_level as difference between vlan device and
parent device lower_levels.

Fixes: f3b0a18b ("net: remove unnecessary variables and callback")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Once driver finishes flashing the firmware image, it should release it.

Fixes: 9c8bca26 ("mlx5: Move firmware flash implementation to devlink")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When we destroy rules from slow path we need to avoid destroying
termination tables since termination tables are never created in slow
path. By doing so we avoid destroying the termination table created for the
slow path.

Fixes: d8a2034f ("net/mlx5: Don't use termination tables in slow path")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

High frequency of PCI ioread calls during recovery flow may cause the
following trace on powerpc:

[ 248.670288] EEH: 2100000 reads ignored for recovering device at
location=Slot1 driver=mlx5_core pci addr=0000:01:00.1
[ 248.670331] EEH: Might be infinite loop in mlx5_core driver
[ 248.670361] CPU: 2 PID: 35247 Comm: kworker/u192:11 Kdump: loaded
Tainted: G OE ------------ 4.14.0-115.14.1.el7a.ppc64le #1
[ 248.670425] Workqueue: mlx5_health0000:01:00.1 health_recover_work
[mlx5_core]
[ 248.670471] Call Trace:
[ 248.670492] [c00020391c11b960] [c000000000c217ac] dump_stack+0xb0/0xf4
(unreliable)
[ 248.670548] [c00020391c11b9a0] [c000000000045818]
eeh_check_failure+0x5c8/0x630
[ 248.670631] [c00020391c11ba50] [c00000000068fce4]
ioread32be+0x114/0x1c0
[ 248.670692] [c00020391c11bac0] [c00800000dd8b400]
mlx5_error_sw_reset+0x160/0x510 [mlx5_core]
[ 248.670752] [c00020391c11bb60] [c00800000dd75824]
mlx5_disable_device+0x34/0x1d0 [mlx5_core]
[ 248.670822] [c00020391c11bbe0] [c00800000dd8affc]
health_recover_work+0x11c/0x3c0 [mlx5_core]
[ 248.670891] [c00020391c11bc80] [c000000000164fcc]
process_one_work+0x1bc/0x5f0
[ 248.670955] [c00020391c11bd20] [c000000000167f8c]
worker_thread+0xac/0x6b0
[ 248.671015] [c00020391c11bdc0] [c000000000171618] kthread+0x168/0x1b0
[ 248.671067] [c00020391c11be30] [c00000000000b65c]
ret_from_kernel_thread+0x5c/0x80

Reduce the PCI ioread frequency during recovery by using msleep()
instead of cond_resched()

Fixes: 3e5b72ac ("net/mlx5: Issue SW reset on FW assert")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Building with some experimental patches, I came across a warning
in the tls code:

include/linux/compiler.h:215:30: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
  215 |  *(volatile typeof(x) *)&(x) = (val);  \
      |                              ^
net/tls/tls_main.c:650:4: note: in expansion of macro 'smp_store_release'
  650 |    smp_store_release(&saved_tcpv4_prot, prot);

This appears to be a legitimate warning about assigning a const pointer
into the non-const 'saved_tcpv4_prot' global. Annotate both the ipv4 and
ipv6 pointers 'const' to make the code internally consistent.

Fixes: 5bb4c45d ("net/tls: Read sk_prot once when building tls proto ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Creation and management of L2TPv3 tunnels and session through netlink
requires CAP_NET_ADMIN. However, a process with CAP_NET_ADMIN in a
non-initial user namespace gets an EPERM due to the use of the
genetlink GENL_ADMIN_PERM flag. Thus, management of L2TP VPNs inside
an unprivileged container won't work.

We replaced the GENL_ADMIN_PERM by the GENL_UNS_ADMIN_PERM flag
similar to other network modules which also had this problem, e.g.,
openvswitch (commit 4a92602a "openvswitch: allow management from
inside user namespaces") and nl80211 (commit 5617c6cd "nl80211:
Allow privileged operations from user namespaces").

I tested this in the container runtime trustm3 (trustm3.github.io)
and was able to create l2tp tunnels and sessions in unpriviliged
(user namespaced) containers using a private network namespace.
For other runtimes such as docker or lxc this should work, too.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: fw upgrade filter fixes

With further testing of the fw-upgrade operations we found a
couple of issues that needed to be cleaned up:
 - the filters other than the base MAC address need to be
   reinstated into the device
 - we don't need to remove the station MAC filter if it
   isn't changing from a previous MAC filter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The code was working too hard and in some cases was trying to
delete filters that weren't there, generating a potentially
misleading error message.
    IONIC_CMD_RX_FILTER_DEL (32) failed: IONIC_RC_ENOENT (-2)

Fixes: 2a654540 ("ionic: Add Rx filter and rx_mode ndo support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NIC's filters are lost in the midst of the fw-upgrade
so we need to replay them into the FW.  We also remove the
unused ionic_rx_filter_del() function.

Fixes: c672412f ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

In set_operation_mode() function remove duplicated check for args.list
parameter, which is already done one line before.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the current hsr code, only 0 and 1 protocol versions are valid.
But current hsr code doesn't check the version, which is received by
userspace.

Test commands:
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4

In the test commands, version 4 is invalid.
So, the command should be failed.

After this patch, following error will occur.
"Error: hsr: Only versions 0..1 are supported."

Fixes: ee1c2797 ("net/hsr: Added support for HSR v1")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix wrong parameter description and related warnings at 'make htmldocs'.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After driver sets the missed chain on the tc skb extension it is
consumed (deleted) by tc_classify_ingress and tc jumps to that chain.
If tc now misses on this chain (either no match, or no goto action),
then last executed chain remains 0, and the skb extension is not re-added,
and the next datapath (ovs) will start from 0.

Fix that by setting last executed chain to the chain read from the skb
extension, so if there is a miss, we set it back.

Fixes: af699626 ("net: sched: Support specifying a starting chain via tc skb ext")
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For HZ < 1000 timeout 2000us rounds up to 1 jiffy but expires randomly
because next timer interrupt could come shortly after starting softirq.

For commonly used CONFIG_HZ=1000 nothing changes.

Fixes: 7acf8a1e ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning")
Reported-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving mt7623 logic out off mt7530, is required to make hardware setting
consistent after we introduce phylink to mtk driver.

Fixes: b8fc9f30 ("net: ethernet: mediatek: Add basic PHYLINK support")
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving mt7623 logic out off mt7530, is required to make hardware setting
consistent after we introduce phylink to mtk driver.

Fixes: ca366d6c ("net: dsa: mt7530: Convert to PHYLINK API")
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The behaviour for what is considered an anycast address changed in
commit 45e4fd26 ("ipv6: Only create RTF_CACHE routes after
encountering pmtu exception"). This now considers the first
address in a subnet where there is a route via a gateway
to be an anycast address.

This breaks path MTU discovery and traceroutes when a host in a
remote network uses the address at the start of a prefix
(eg 2600:: advertised as 2600::/48 in the DFZ) as ICMP errors
will not be sent to anycast addresses.

This patch excludes any routes with a gateway, or via point to
point links, like the behaviour previously from
rt6_is_gw_or_nonexthop in net/ipv6/route.c.

This can be tested with:
ip link add v1 type veth peer name v2
ip netns add test
ip netns exec test ip link set lo up
ip link set v2 netns test
ip link set v1 up
ip netns exec test ip link set v2 up
ip addr add 2001:db8::1/64 dev v1 nodad
ip addr add 2001:db8:100:: dev lo nodad
ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad
ip netns exec test ip route add unreachable 2001:db8:1::1
ip netns exec test ip route add 2001:db8:100::/64 via 2001:db8::1
ip netns exec test sysctl net.ipv6.conf.all.forwarding=1
ip route add 2001:db8:1::1 via 2001:db8::2
ping -I 2001:db8::1 2001:db8:1::1 -c1
ping -I 2001:db8:100:: 2001:db8:1::1 -c1
ip addr delete 2001:db8:100:: dev lo
ip netns delete test

Currently the first ping will get back a destination unreachable ICMP
error, but the second will never get a response, with "icmp6_send:
acast source" logged. After this patch, both get destination
unreachable ICMP replies.

Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Tim Stallard <code@timstallard.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit fac6fce9 ("net: icmp6: provide input address for
traceroute6") ICMPv6 errors have source addresses from the ingress
interface. However, this overrides when source address selection is
influenced by setting preferred source addresses on routes.

This can result in ICMP errors being lost to upstream BCP38 filters
when the wrong source addresses are used, breaking path MTU discovery
and traceroute.

This patch sets the modified source address selection to only take place
when the route used has no prefsrc set.

It can be tested with:

ip link add v1 type veth peer name v2
ip netns add test
ip netns exec test ip link set lo up
ip link set v2 netns test
ip link set v1 up
ip netns exec test ip link set v2 up
ip addr add 2001:db8::1/64 dev v1 nodad
ip addr add 2001:db8::3 dev v1 nodad
ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad
ip netns exec test ip route add unreachable 2001:db8:1::1
ip netns exec test ip addr add 2001:db8:100::1 dev lo
ip netns exec test ip route add 2001:db8::1 dev v2 src 2001:db8:100::1
ip route add 2001:db8:1000::1 via 2001:db8::2
traceroute6 -s 2001:db8::1 2001:db8:1000::1
traceroute6 -s 2001:db8::3 2001:db8:1000::1
ip netns delete test

Output before:
$ traceroute6 -s 2001:db8::1 2001:db8:1000::1
traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets
 1  2001:db8::2 (2001:db8::2)  0.843 ms !N  0.396 ms !N  0.257 ms !N
$ traceroute6 -s 2001:db8::3 2001:db8:1000::1
traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets
 1  2001:db8::2 (2001:db8::2)  0.772 ms !N  0.257 ms !N  0.357 ms !N

After:
$ traceroute6 -s 2001:db8::1 2001:db8:1000::1
traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets
 1  2001:db8:100::1 (2001:db8:100::1)  8.885 ms !N  0.310 ms !N  0.174 ms !N
$ traceroute6 -s 2001:db8::3 2001:db8:1000::1
traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets
 1  2001:db8::2 (2001:db8::2)  1.403 ms !N  0.205 ms !N  0.313 ms !N

Fixes: fac6fce9 ("net: icmp6: provide input address for traceroute6")
Signed-off-by: Tim Stallard <code@timstallard.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Martin Fuzzey says:

====================
Fix Wake on lan with FEC on i.MX6

This series fixes WoL support with the FEC on i.MX6
The support was already in mainline but seems to have bitrotted
somewhat.

Only tested with i.MX6DL

Changes V2->V3
	Patch 1:
		fix non initialized variable introduced in V2 causing
		probe to sometimes fail.

	Patch 2:
		remove /delete-property/interrupts-extended in
		arch/arm/boot/dts/imx6qp.dtsi.

	Patches 3 and 4:
		Add received Acked-by and RB tags.

Changes V1->V2
	Move the register offset and bit number from the DT to driver code
	Add SOB from Fugang Duan for the NXP code on which this is based
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is required for wake on lan on i.MX6
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This property allows the gpr register bit to be defined
for wake on lan support.
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to wake from suspend by ethernet magic packets the GPC
must be used as intc does not have wakeup functionality.

But the FEC DT node currently uses interrupt-extended,
specificying intc, thus breaking WoL.

This problem is probably fallout from the stacked domain conversion
as intc used to chain to GPC.

So replace "interrupts-extended" by "interrupts" to use the default
parent which is GPC.

Fixes: b923ff6a ("ARM: imx6: convert GPC to stacked domains")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: David S. Miller <davem@davemloft.net>

On some SoCs, such as the i.MX6, it is necessary to set a bit
in the SoC level GPR register before suspending for wake on lan
to work.

The fec platform callback sleep_mode_enable was intended to allow this
but the platform implementation was NAK'd back in 2015 [1]

This means that, currently, wake on lan is broken on mainline for
the i.MX6 at least.

So implement the required bit setting in the fec driver by itself
by adding a new optional DT property indicating the GPR register
and adding the offset and bit information to the driver.

[1] https://www.spinics.net/lists/netdev/msg310922.htmlSigned-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix warnings related to kernel-doc notation, and wording in
function description.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net, they are:

1) Fix spurious overlap condition in the rbtree tree, from Stefano Brivio.

2) Fix possible uninitialized pointer dereference in nft_lookup.

3) IDLETIMER v1 target matches the Android layout, from
   Maciej Zenczykowski.

4) Dangling pointer in nf_tables_set_alloc_name, from Eric Dumazet.

5) Fix RCU warning splat in ipset find_set_type(), from Amol Grover.

6) Report EOPNOTSUPP on unsupported set flags and object types in sets.

7) Add NFT_SET_CONCAT flag to provide consistent error reporting
   when users defines set with ranges in concatenations in old kernels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge more updates from Andrew Morton:

 - a lot more of MM, quite a bit more yet to come: (memcg, pagemap,
   vmalloc, pagealloc, migration, thp, ksm, madvise, virtio,
   userfaultfd, memory-hotplug, shmem, rmap, zswap, zsmalloc, cleanups)

 - various other subsystems (procfs, misc, MAINTAINERS, bitops, lib,
   checkpatch, epoll, binfmt, kallsyms, reiserfs, kmod, gcov, kconfig,
   ubsan, fault-injection, ipc)

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (158 commits)
  ipc/shm.c: make compat_ksys_shmctl() static
  ipc/mqueue.c: fix a brace coding style issue
  lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"
  ubsan: include bug type in report header
  kasan: unset panic_on_warn before calling panic()
  ubsan: check panic_on_warn
  drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks
  ubsan: split "bounds" checker from other options
  ubsan: add trap instrumentation option
  init/Kconfig: clean up ANON_INODES and old IO schedulers options
  kernel/gcov/fs.c: replace zero-length array with flexible-array member
  gcov: gcc_3_4: replace zero-length array with flexible-array member
  gcov: gcc_4_7: replace zero-length array with flexible-array member
  kernel/kmod.c: fix a typo "assuems" -> "assumes"
  reiserfs: clean up several indentation issues
  kallsyms: unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()
  samples/hw_breakpoint: drop use of kallsyms_lookup_name()
  samples/hw_breakpoint: drop HW_BREAKPOINT_R when reporting writes
  fs/binfmt_elf.c: don't free interpreter's ELF pheaders on common path
  fs/binfmt_elf.c: allocate less for static executable
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix a page leak in nfs_destroy_unlinked_subrequests()

   - Fix use-after-free issues in nfs_pageio_add_request()

   - Fix new mount code constant_table array definitions

   - finish_automount() requires us to hold 2 refs to the mount record

  Features:
   - Improve the accuracy of telldir/seekdir by using 64-bit cookies
     when possible.

   - Allow one RDMA active connection and several zombie connections to
     prevent blocking if the remote server is unresponsive.

   - Limit the size of the NFS access cache by default

   - Reduce the number of references to credentials that are taken by
     NFS

   - pNFS files and flexfiles drivers now support per-layout segment
     COMMIT lists.

   - Enable partial-file layout segments in the pNFS/flexfiles driver.

   - Add support for CB_RECALL_ANY to the pNFS flexfiles layout type

   - pNFS/flexfiles Report NFS4ERR_DELAY and NFS4ERR_GRACE errors from
     the DS using the layouterror mechanism.

  Bugfixes and cleanups:
   - SUNRPC: Fix krb5p regressions

   - Don't specify NFS version in "UDP not supported" error

   - nfsroot: set tcp as the default transport protocol

   - pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()

   - alloc_nfs_open_context() must use the file cred when available

   - Fix locking when dereferencing the delegation cred

   - Fix memory leaks in O_DIRECT when nfs_get_lock_context() fails

   - Various clean ups of the NFS O_DIRECT commit code

   - Clean up RDMA connect/disconnect

   - Replace zero-length arrays with C99-style flexible arrays"

* tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (86 commits)
  NFS: Clean up process of marking inode stale.
  SUNRPC: Don't start a timer on an already queued rpc task
  NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn()
  NFS/pnfs: Fix dereference of layout cred in pnfs_layoutcommit_inode()
  NFS: Beware when dereferencing the delegation cred
  NFS: Add a module parameter to set nfs_mountpoint_expiry_timeout
  NFS: finish_automount() requires us to hold 2 refs to the mount record
  NFS: Fix a few constant_table array definitions
  NFS: Try to join page groups before an O_DIRECT retransmission
  NFS: Refactor nfs_lock_and_join_requests()
  NFS: Reverse the submission order of requests in __nfs_pageio_add_request()
  NFS: Clean up nfs_lock_and_join_requests()
  NFS: Remove the redundant function nfs_pgio_has_mirroring()
  NFS: Fix memory leaks in nfs_pageio_stop_mirroring()
  NFS: Fix a request reference leak in nfs_direct_write_clear_reqs()
  NFS: Fix use-after-free issues in nfs_pageio_add_request()
  NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests()
  NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()
  NFS: Remove unused FLUSH_SYNC support in nfs_initiate_pgio()
  pNFS/flexfiles: Specify the layout segment range in LAYOUTGET
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've mainly focused on fixing bugs and addressing
  issues in recently introduced compression support.

  Enhancement:
   - add zstd support, and set LZ4 by default
   - add ioctl() to show # of compressed blocks
   - show mount time in debugfs
   - replace rwsem with spinlock
   - avoid lock contention in DIO reads

  Some major bug fixes wrt compression:
   - compressed block count
   - memory access and leak
   - remove obsolete fields
   - flag controls

  Other bug fixes and clean ups:
   - fix overflow when handling .flags in inode_info
   - fix SPO issue during resize FS flow
   - fix compression with fsverity enabled
   - potential deadlock when writing compressed pages
   - show missing mount options"

* tag 'f2fs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (66 commits)
  f2fs: keep inline_data when compression conversion
  f2fs: fix to disable compression on directory
  f2fs: add missing CONFIG_F2FS_FS_COMPRESSION
  f2fs: switch discard_policy.timeout to bool type
  f2fs: fix to verify tpage before releasing in f2fs_free_dic()
  f2fs: show compression in statx
  f2fs: clean up dic->tpages assignment
  f2fs: compress: support zstd compress algorithm
  f2fs: compress: add .{init,destroy}_decompress_ctx callback
  f2fs: compress: fix to call missing destroy_compress_ctx()
  f2fs: change default compression algorithm
  f2fs: clean up {cic,dic}.ref handling
  f2fs: fix to use f2fs_readpage_limit() in f2fs_read_multi_pages()
  f2fs: xattr.h: Make stub helpers inline
  f2fs: fix to avoid double unlock
  f2fs: fix potential .flags overflow on 32bit architecture
  f2fs: fix NULL pointer dereference in f2fs_verity_work()
  f2fs: fix to clear PG_error if fsverity failed
  f2fs: don't call fscrypt_get_encryption_info() explicitly in f2fs_tmpfile()
  f2fs: don't trigger data flush in foreground operation
  ...

Pull UBI and UBIFS updates from Richard Weinberger:

 - Fix for memory leaks around UBIFS orphan handling

 - Fix for memory leaks around UBI fastmap

 - Remove zero-length array from ubi-media.h

 - Fix for TNC lookup in UBIFS orphan code

* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: ubi-media.h: Replace zero-length array with flexible-array member
  ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len
  ubi: fastmap: Only produce the initial anchor PEB when fastmap is used
  ubi: fastmap: Free unused fastmap anchor peb during detach
  ubifs: ubifs_add_orphan: Fix a memory leak bug
  ubifs: ubifs_jnl_write_inode: Fix a memory leak bug
  ubifs: Fix ubifs_tnc_lookup() usage in do_kill_orphans()

Pull UML updates from Richard Weinberger:

 - New mode for time travel, external via virtio

 - Fixes for ubd to make sure no requests can get lost

 - Fixes for vector networking

 - Allow CONFIG_STATIC_LINK only when possible

 - Minor cleanups and fixes

* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Remove some unnecessary NULL checks in vector_user.c
  um: vector: Avoid NULL ptr deference if transport is unset
  um: Make CONFIG_STATIC_LINK actually static
  um: Implement cpu_relax() as ndelay(1) for time-travel
  um: Implement ndelay/udelay in time-travel mode
  um: Implement time-travel=ext
  um: virtio: Implement VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS
  um: time-travel: Rewrite as an event scheduler
  um: Move timer-internal.h to non-shared
  hostfs: Use kasprintf() instead of fixed buffer formatting
  um: falloc.h needs to be directly included for older libc
  um: ubd: Retry buffer read on any kind of error
  um: ubd: Prevent buffer overrun on command completion
  um: Fix overlapping ELF segments when statically linked
  um: Delete never executed timer
  um: Don't overwrite ethtool driver version
  um: Fix len of file in create_pid_file
  um: Don't use console_drivers directly
  um: Cleanup CONFIG_IOSCHED_CFQ

Pull OpenRISC updates from Stafford Horne:
 "A few cleanups all over the place, things of note:

   - Enable the clone3 syscall

   - Remove CONFIG_CROSS_COMPILE from Krzysztof Kozlowski

   - Update to use mmgrab from Julia Lawall"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Remove obsolete show_trace_task function
  openrisc: Cleanup copy_thread_tls docs and comments
  openrisc: Enable the clone3 syscall
  openrisc: Convert copy_thread to copy_thread_tls
  openrisc: use mmgrab
  openrisc: configs: Cleanup CONFIG_CROSS_COMPILE

Pull parisc updates from Helge Deller:
 "Some cleanups in arch_rw locking functions, improved interrupt
  handling in arch spinlocks, coversions to request_irq() and syscall
  table generation cleanups"

* 'parisc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: remove nargs from __SYSCALL
  parisc: Refactor alternative code to accept multiple conditions
  parisc: Rework arch_rw locking functions
  parisc: Improve interrupt handling in arch_spin_lock_flags()
  parisc: Replace setup_irq() by request_irq()

Pull sparc update from David Miller:
 "A per-device DMA ops conversion for sparc32 by Chrstioph Hellwig"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: use per-device dma_ops

Pull IDE update from David Miller:
 "As usual, very quiet in this subsystem.

  Just a list_for_each_entry_safe() conversion"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  drivers/ide: Fix build regression.
  drivers/ide: convert to list_for_each_entry_safe()

Pull networking fixes from David Miller:

 1) Slave bond and team devices should not be assigned ipv6 link local
    addresses, from Jarod Wilson.

 2) Fix clock sink config on some at803x PHY devices, from Oleksij
    Rempel.

 3) Uninitialized stack space transmitted in slcan frames, fix from
    Richard Palethorpe.

 4) Guard HW VLAN ops properly in stmmac driver, from Jose Abreu.

 5) "=" --> "|=" fix in aquantia driver, from Colin Ian King.

 6) Fix TCP fallback in mptcp, from Florian Westphal. (accessing a plain
    tcp_sk as if it were an mptcp socket).

 7) Fix cavium driver in some configurations wrt. PTP, from Yue Haibing.

 8) Make ipv6 and ipv4 consistent in the lower bound allowed for
    neighbour entry retrans_time, from Hangbin Liu.

 9) Don't use private workqueue in pegasus usb driver, from Petko
    Manolov.

10) Fix integer overflow in mlxsw, from Colin Ian King.

11) Missing refcnt init in cls_tcindex, from Cong Wang.

12) One too many loop iterations when processing cmpri entries in ipv6
    rpl code, from Alexander Aring.

13) Disable SG and TSO by default in r8169, from Heiner Kallweit.

14) NULL deref in macsec, from Davide Caratti.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
  macsec: fix NULL dereference in macsec_upd_offload()
  skbuff.h: Improve the checksum related comments
  net: dsa: bcm_sf2: Ensure correct sub-node is parsed
  qed: remove redundant assignment to variable 'rc'
  wimax: remove some redundant assignments to variable result
  mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE
  mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_PRIORITY
  r8169: change back SG and TSO to be disabled by default
  net: dsa: bcm_sf2: Do not register slave MDIO bus with OF
  ipv6: rpl: fix loop iteration
  tun: Don't put_page() for all negative return values from XDP program
  net: dsa: mt7530: fix null pointer dereferencing in port5 setup
  mptcp: add some missing pr_fmt defines
  net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers
  net_sched: fix a missing refcnt in tcindex_init()
  net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting
  mlxsw: spectrum_trap: fix unintention integer overflow on left shift
  pegasus: Remove pegasus' own workqueue
  neigh: support smaller retrans_time settting
  net: openvswitch: use hlist_for_each_entry_rcu instead of hlist_for_each_entry
  ...

Pull pcmcia updates from Dominik Brodowski:
 "A few PCMCIA odd fixes: removing a few spaces and useless casts,
  replacing snprintf() with scnprintf(), and replacing zero-length
  arrays with a flexible-array member"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: remove some unused space characters
  pcmcia: soc_common.h: Replace zero-length array with flexible-array member
  pcmcia: cs_internal.h: Replace zero-length array with flexible-array member
  pcmcia: Use scnprintf() for avoiding potential buffer overflow
  pcmcia: omap: remove useless cast for driver.name

Fix the following sparse warning:

ipc/shm.c:1335:6: warning: symbol 'compat_ksys_shmctl' was not declared.
Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200403063933.24785-1-yanaijie@huawei.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: somala swaraj <somalaswaraj@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200301135530.18340-1-somalaswaraj@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s/capabilitiy/capability
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1585818594-27373-1-git-send-email-hqjagain@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When syzbot tries to figure out how to deduplicate bug reports, it prefers
seeing a hint about a specific bug type (we can do better than just
"UBSAN").  This lifts the handler reason into the UBSAN report line that
includes the file path that tripped a check.  Unfortunately, UBSAN does
not provide function names.
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Link: http://lkml.kernel.org/r/20200227193516.32566-7-keescook@chromium.org
Link: https://lore.kernel.org/lkml/CACT4Y+bsLJ-wFx_TaXqax3JByUOWB3uk787LsyMVcfW6JzzGvg@mail.gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>