- 08 Jun, 2007 40 commits
-
-
Robert P. J. Day authored
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This was added during 2.5.x, but was never moved along. This can easily be resurrected if someone has one they wish to work with, but it's not worth keeping around in its current form. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This enables simple hotplug support for sparsemem users. Presently this only permits memory being added in to node 0 on ZONE_NORMAL. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Currently cpu_to_node() is always 0 in the UP case, though we do want to have the CPU association linked in under sysfs even in the cases where we're only on a single CPU. Fix this up, so we have the cpu0 link on all of the available nodes that don't already have a CPU link of their own. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The only platforms that are supporting NUMA are doing so via sparsemem, so update the dependency. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This adds the URAM block on SH7722 as a separate node. Sparsemem is required for this, or it can simply be disabled by explicitly selecting a flatmem model. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This adds basic support for multiple nodes on SH machines. This is primarily useful for boards with many different memory blocks that are otherwise unused (SH7722/SH7785 URAM and so forth). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Kill off a bunch of externs, and use sections.h instead.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Currently using multiple nodes tramples the ZONE_NORMAL max low pfn, tidy up the logic a bit to get it all working as expected. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Slub currently defaults to 8-byte alignment for the kmalloc and slab minalign values, where 4 will suffice. In the slab case BYTES_PER_WORD == 4 already, so defining the minalign values outright doesn't cause any regressions there either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Wire up mbind and get/set_mempolicy() in their reserved places. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Some compilers don't support the explicit CPU tuning, while binutils is still able to handle the special subtype-specific opcodes. Make the CFLAG optional, falling back on the compiler default if nothing better exists. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
We have to call in to sparse_memory_present_with_active_regions() earlier in order for sparsemem to be happy. This was being called too late, and was causing troubles with the platforms that needed to enable sparsemem. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
If we have multiple nodes, register these at topology_init() time. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Handy for debugging bootmem troubles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This implements basic sparsemem support for SH. Presently this only uses static sparsemem, and we still permit explicit selection of flatmem. Those boards that want sparsemem can select it as usual. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
pfn_valid() is already defined in the sparsemem case, so we only need to define this for CONFIG_FLATMEM. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Nobuhiro Iwamatsu authored
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Takashi YOSHII authored
.machvec.init can be misaligned with the recent machvec changes, forcibly align it on the boundary that it expects, as before. Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Now that select no longer works for selecting the "closest" CPU, we have to explicitly reference the precise sub-type in the few places where it actually matters (presently only setup code and some legacy sh-sci cruft). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This kills off the BareCPU board as a "special" machvec, rather, we leave this as a default for when no other vector is available, or when we want to use it in combination with other vectors for testing with generic ops. As sh_mv is copied out anyways (or overloaded when an alternate vector is explicitly selected), this doesn't consume any additional memory. The generic machvec can be forcibly selected with sh_mv=generic, or by not having any other boards enabled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
We now throw all of the machvecs in to .machvec.init and either select one on the command line, or copy out the first (and usually only) one to sh_mv. The rest are freed as usual. This gets rid of all of the silly sh_mv aliasing and makes the selection explicit rather than link-order dependent. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This tidies up the build rules and permits multiple boards to be linked in to the same kernel. The earlier Kconfig work ensures that the CPU configuration is consistent across the boards, as this is the only thing that we can't do dynamically. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The command line wasn't being saved off properly after the machvec changes went in, fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This was a big mess, rework the logic a bit so that we constrain to a particular subtype and figure out the board support based on that. This makes building subtype specific kernels supporting multiple boards possible again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This fixes up much of the machvec handling, allowing for it to be overloaded on boot. Making practical use of this still requires some Kconfig munging, however. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This adds in some more __user annotations. These weren't being handled properly in some of the __get_user and __put_user paths, so tidy those up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Split out the CPU topology initialization to a separate file, and switch it to a percpu type, rather than an NR_CPUS array. At the same time, switch to only registering present CPUs, rather than using the possible CPU map. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Bryan Wu authored
This bug was caught by LTP testcase fchmod06 on Blackfin platform. In the manpage of fchmod, "EPERM: The effective UID does not match the owner of the file, and the process is not privileged (Linux: it does not have the CAP_FOWNER capability)." But the ramfs nommu code missed the inode_change_ok POSIX UID/GID verification. This patch fixed this. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-xtensa.org/kernel/xtensa-feedLinus Torvalds authored
* git://git.linux-xtensa.org/kernel/xtensa-feed: Xtensa: use asm-generic/fcntl.h [XTENSA] Remove non-rt signal handling [XTENSA] Move common sections into bss sections [XTENSA] clean-up header files [XTENSA] Use generic 64-bit division [XTENSA] Remove multi-exported symbols from xtensa_ksyms.c [XTENSA] fix sources using deprecated assembler directive [XTENSA] Spelling fixes in arch/xtensa [XTENSA] fix bit operations in bitops.h
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix SBUS IRQ regression caused by PCI-E driver. [SPARC64]: Fix 2 bugs in PCI Sabre bus scanning.
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits) xfrm: Add security check before flushing SAD/SPD [NET_SCHED]: Fix filter double free [NET]: Avoid duplicate netlink notification when changing link state [UDP]: Revert 2-pass hashing changes. [AF_UNIX]: Fix stream recvmsg() race. [NETFILTER]: nf_conntrack_amanda: fix textsearch_prepare() error check [NETFILTER]: ip_tables: fix compat related crash [NETFILTER]: nf_conntrack: fix helper module unload races [RTNETLINK]: ifindex 0 does not exist [NETLINK]: Mark netlink policies const [TCP] tcp_probe: Attach printf attribute properly to printl(). [TCP]: Use LIMIT_NETDEBUG in tcp_retransmit_timer(). [NET]: Merge dst_discard_in and dst_discard_out. [RFKILL]: Make rfkill->name const [IPV4]: Restore old behaviour of default config values [IPV4]: Add default config support after inetdev_init [IPV4]: Convert IPv4 devconf to an array [IPV4]: Only panic if inetdev_init fails for loopback [TCP]: Honour sk_bound_dev_if in tcp_v4_send_ack [BNX2]: Update version and reldate. ...
-
Steven Rostedt authored
This is a minor fix, but what is currently there is essentially wrong. In do_page_fault, if the faulting address from user code happens to be in kernel address space (int *p = (int*)-1; p = 0xbed;) then the do_page_fault handler will jump over the local_irq_enable with the goto bad_area_nosemaphore; But the first line there sees this is user code and goes through the process of sending a signal to send SIGSEGV to the user task. This whole time interrupts are disabled and the task can not be preempted by a higher priority task. This patch always enables interrupts in the user path of the bad_area_nosemaphore. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: fix pxa27x keyboard driver [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking [ARM] 4421/1: AT91: Value of _KEY fields. [ARM] Solve buggy smp_processor_id() usage [ARM] 4422/1: Fix default value handling in gpio_direction_output (PXA) [ARM] 4419/1: AT91: SAM9 USB clocks check for suspending [ARM] 4418/1: AT91: Number of programmable clocks differs [ARM] 4392/2: Do not corrupt the SP register in compressed/head.S
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix warning by moving do_default_vi into CONFIG_CPU_MIPSR2_SRS [MIPS] Fix some minor typoes in arch/mips/Kconfig. [MIPS] Remove prototype for deleted function qemu_handle_int [MIPS] Fix some system calls with long long arguments [MIPS] Make dma_map_sg handle sg elements which are longer than one page [MIPS] Drop __ARCH_WANT_SYS_FADVISE64 [MIPS] Fix VGA corruption on RM300C [MIPS] RM300: Fix MMIO problems by marking the PCI INT ACK region busy [MIPS] EMMA2RH: remove dead KGDB code [MIPS] Remove duplicate fpu enable hazard code. [MIPS] Atlas, Malta, SEAD: Remove scroll from interrupt handler.
-
Peter Zijlstra authored
In file included from /usr/src/linux-2.6-2/net/ipv4/ip_input.c:118: include2/asm/system.h:245: error: parse error before "__cmpxchg_32" include2/asm/system.h:245: error: parse error before '*' token include2/asm/system.h:245: warning: type defaults to `int' in declaration of `__cmpxchg_32' include2/asm/system.h:245: warning: function declaration isn't a prototype include2/asm/system.h:245: warning: data definition has no type or storage class Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-