Avoid entering a QP as member of a multicast group multiple times.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

We keep IB device structures around until the last sysfs reference is
gone, but we shouldn't ask the low-level driver to do anything after
the LLD unregisters the device.  To handle this, check the reg_state
field and just fail sysfs show() requests if the device has already
been unregistered.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Set mthca_driver.owner to THIS_MODULE.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Make the type parameter of mthca_alloc_db() be an enum mthca_db_type
instead of an int.  This doesn't have any practical effect but
documents the functions a little better.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Use jiffies_to_msecs() so we print a human-readable time so
we don't have to worry about what HZ is configured to, and
print out a few values to make post-mortem analysis easier.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Make ctx_id_mutex and ctx_id_table static to quiet sparse warnings.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Bind communication identifiers to a device to support device removal.
Export per HCA CM devices to userspace.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>

Eliminate ucm.h.  Replace ucm_dbg with direct call to printk KERN_ERR.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>

Add kernel support for userspace calling poll CQ, request CQ
notification, post send, post receive, post SRQ receive, create AH and
destroy AH commands.  These commands allow us to support userspace
verbs for devices that can't perform these operations directly from
userspace (eg the PathScale HCA).
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add kernel/user ABI structures for marshalling poll CQ, request CQ
notification, post send, post receive, post SRQ receive, create AH and
destroy AH commands.  These commands allow us to support userspace
verbs for devices that can't perform these operations directly from
userspace (eg the PathScale HCA).
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Give each device a uverbs_cmd_mask, so that a low-level driver can
control which methods may be called on behalf of userspace.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

If the SA query module's initialization fails for a device, then that
device won't have a struct ib_sa_device associated.  We should fail SA
queries in that case, rather than blindly dereferencing the NULL
pointer we get back from ib_get_client_data().
Signed-off-by: Roland Dreier <rolandd@cisco.com>

A couple of functions were missing spin_unlock calls in error paths.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

ipoib_create_qp() no longer creates IPoIB's QP, so it shouldn't
destroy the QP on failure -- that unwinding happens elsewhere, so the
current code can cause a double free.  While we're at it, the
function's name should match what it actually does, so rename it to
ipoib_init_qp().
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Check the sizes of CQs, QPs and SRQs when creating objects, and fail
instead of creating too-big queues.  Also return real limits instead
of just plausible-sounding values from mthca_query_device().
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

There is a bug in ib_mad_init_device(): if ib_agent_port_open() fails
for a given port, then the current code doesn't call ib_mad_port_close()
for that port.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The hardware relies on us keeping one extra work request that never
gets used in SRQs.  Add checks to the SRQ work request posting
functions so that they fail when someone is about to use up that extra
work request, rather than when someone uses the very last work request.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Our hardware supports generating an event when the number of receives
posted to a shared receive queue (SRQ) falls below a user-specified
limit.  Implement mthca_modify_srq() to arm the limit, and add code to
handle dispatching SRQ events when they occur.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Check port number before passing query_port or modify_port operations
on to device driver.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Reject userspace memory registrations with invalid permission flags:
"local write" is required if "remote write" or "remote atomic" is also
requested.

Pointed out by Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add code to fill in the bad_pkey_cntr, max_mtu, active_mtu and
subnet_timeout fields in mthca_query_port().
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add abi_version attribute to uverbs class devices to allow for
ABI versioning of device-specific interfaces.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

By waiting to add resources to our lists until after the last
operation that can fail, we don't have to remove them from their lists
in the error path.  Also, we should hold the idr mutex until we know
whether resource creation has succeed or failed, to avoid someone
finding a resource in our table before we're ready.

Loosely based on work by Robert Walsh <rjwalsh@pathscale.com>.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Introduce new userspace verbs ABI version 3.  This eliminates some
unneeded commands, and adds support for user-created completion
channels.  This cleans up problems with file leaks on error paths, and
also makes sure that file descriptors are always installed into the
correct process.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Return correct atomic capability flag from mthca query function.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add checks so that we only allow multicast attach/detach with
a valid multicast GID and the correct QP type.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Dipankar made RCU limit the batch size to improve latency, but that
approach is unworkable: it can cause the RCU queues to grow without
bounds, since the batch limiter ended up limiting the callbacks.

So make the limit much higher, and start planning on instead limiting
the batch size by doing RCU callbacks more often if the queue looks like
it might be growing too long.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix the fact that the svideo input will only give input in black/white in
some circumstances.  Reason is that in the PCI controller driver (zr36067),
after setting input, we reset norm, which overwrites the input register
with the default.  This patch makes it always set the correct value for the
input when changing norm.
Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix bug #5404 in kernel bugzilla.

It basically updates the vpx3220 initialization tables with some newer
values that we've had in CVS for a while (and that, for some reason, never
ended up in the kernel...  must've gotten lost).  Those fix a ~16 pixels
noise at the top of the picture in at least SECAM, although (now that I
think about it) PAL was probably affected, also.
Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix bug 5441.

I didn't know about messy programs like svgatextmode...  Couldn't this be
integrated in some linux/drivers/video/console/svgacon.c ?...  So because
of the existence of the svgatextmode program, the kernel is not supposed to
touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ?

Disabling the check in vgacon_resize() might help indeed, but I'm really
not sure whether it will work for any chipset: in my patch, CRT registers
are set at each console switch, since stty rows/cols apply to consoles
separately...

The attached solution is to keep the test, but if it fails, we assume that
the caller knows what it does (i.e.  it is svgatextmode) and then disable
any further call to vgacon_doresize.  Svgatextmode is usually used to
_expand_ the display, not to shrink it.  And it is harmless in the case of
a too big stty rows/cols: the display will just be cropped.  I tested it on
my laptop, and it works fine with svgatextmode.

A better solution would be that svgatextmode explicitely tells the kernel
not to care about video timing, but for this an interface needs be defined
and svgatextmode be patched.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It seems that all the list_*_rcu primitives are missing a memory barrier
on the very first dereference.  For example,

#define list_for_each_rcu(pos, head) \
	for (pos = (head)->next; prefetch(pos->next), pos != (head); \
		pos = rcu_dereference(pos->next))

It will go something like:

	pos = (head)->next

	prefetch(pos->next)

	pos != (head)

	do stuff

We're missing a barrier here.

	pos = rcu_dereference(pos->next)

		fetch pos->next

		barrier given by rcu_dereference(pos->next)

		store pos

Without the missing barrier, the pos->next value may turn out to be stale.
In fact, if "do stuff" were also dereferencing pos and relying on
list_for_each_rcu to provide the barrier then it may also break.

So here is a patch to make sure that we have a barrier for the first
element in the list.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

As noticed by Nick Piggin, we need to make sure that we check the page
count before we check for PageDirty, since the dirty check is only valid
if the count implies that we're the only possible ones holding the page.

We always did do this, but the code needs a read-memory-barrier to make
sure that the orderign is also honored by the CPU.

(The writer side is ordered due to the atomic decrement and test on the
page count, see the discussion on linux-kernel)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

	... otherwise, things like alpha and sparc64 break and break
badly.  They define cpu_possible_map to something else in smp.h
*AFTER* having included cpumask.h.

	If that puppy is a macro, expansion will happen at the actual
caller, when we'd already seen #define cpu_possible_map ... and we will
get the right thing used.

	As an inline helper it will be tokenized before we get to that
define and that's it; no matter what we define later, it won't affect
anything.  We get modules with dependency on cpu_possible_map instead
of the right symbol (phys_cpu_present_map in case of sparc64), or outright
link errors if they are built-in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kernel version 2.6.13 introduced a regression in the generic USB
serial converter driver (usbserial.o, drivers/usb/serial/generic.c).
The bug manifests, as far as I can tell, whenever you attempt to write
to the device -- the write will never complete (write() returns 0, or
blocks).
Signed-off-by: Randall Nortman <oss@wonderclown.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I am taking over all Megaraid SCSI drivers.  Here is the patch for the
MAINTENERS file.
Signed-off-by: Neela Syam Kolli <Neela.Kolli@engenio.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Argument does not agree.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>