Add a simple helper to stat with a kernel space file name and switch
the early init code over to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to mknod with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_mknod.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to mkdir with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_mkdir.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to symlink with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_symlink.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to link with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_link.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to check if a file exists based on kernel space file
name and switch the early init code over to it.  Note that this
theoretically changes behavior as it always is based on the effective
permissions.  But during early init that doesn't make a difference.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to chmod with a kernel space file name and switch
the early init code over to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to chown with a kernel space file name and switch
the early init code over to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to chroot with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_chroot.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to chdir with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_chdir.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to rmdir with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_rmdir.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a simple helper to unlink with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_unlink.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Like ksys_umount, but takes a kernel pointer for the destination path.
Switch over the umount in the init code, which just happen to work due to
the implicit set_fs(KERNEL_DS) during early init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Like do_mount, but takes a kernel pointer for the destination path.
Switch over the mounts in the init code and devtmpfs to it, which
just happen to work due to the implicit set_fs(KERNEL_DS) during early
init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>

This helper is only used for the early init code.
Signed-off-by: Christoph Hellwig <hch@lst.de>

This helper is only used for the early init code.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Set ramdisk_execute_command to "/init" at compile time.  The command
line can still override it, but this saves a few instructions and
removes a NULL check.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Split the main worker loop into a separate function.  This allows
devtmpfsd_setup to be marked __init, which will allows us to call
__init routines for the setup work.  devtmpfѕ itself needs a __ref
marker for that to work, and a comment explaining why it works.
Signed-off-by: Christoph Hellwig <hch@lst.de>

This mirrors do_unlinkat and will make life a little easier for
the init code to reuse the whole function with a kernel filename.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Factor out a path_umount helper that takes a struct path * instead of the
actual file name.  This will allow to convert the init and devtmpfs code
to properly mount based on a kernel pointer instead of relying on the
implicit set_fs(KERNEL_DS) during early init.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Factor out a path_mount helper that takes a struct path * instead of the
actual file name.  This will allow to convert the init and devtmpfs code
to properly mount based on a kernel pointer instead of relying on the
implicit set_fs(KERNEL_DS) during early init.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Don't bother saving away the pathname and just use the new struct path
based utimes helper instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Rename utimes_common to vfs_utimes and make it available outside of
utimes.c.  This will be used by the initramfs unpacking code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Consolidate the validation of the timespec from the two callers into
utimes_common.  That means it is done a little later (e.g. after the
path lookup), but I can't find anything that requires a specific
order of processing the errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Split out one helper each for path vs fd based operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Fold it into the only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Fold it into the only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Fold it into the only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Just open code it in the two callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Just open code it in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't rely on the implicit set_fs(KERNEL_DS) for ksys_open to work, but
instead open a struct file for /dev/console and then install it as FD
0/1/2 manually.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no good reason to mess with file descriptors from in-kernel
code, switch the initramfs unpacking to struct file based write
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no point in trying to clean up after unpacking the initramfs
failed, as it should never get past the magic number check.  In addition
the current code only removes file that are direct children of the root
entry, which wasn't complete anyway

Fixes: df52092f ("fastboot: remove duplicate unpack_to_rootfs()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If initrd support is not enable just print the warning directly instead
of hiding the fact that we just failed behind two stub functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

The classic initial ramdisk has been replaced by the much more
flexible and efficient initramfs a long time.  Warn about it being
removed soon.

Includes a spelling fix from Colin Ian King <colin.king@canonical.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no good reason to mess with file descriptors from in-kernel
code, switch the initrd loading to struct file based read and writes
instead.

Also Pass an explicit offset instead of ->f_pos, and to make that easier,
use file scope file structs and offsets everywhere except for
identify_ramdisk_image instead of the current strange mix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

BLKFLSBUF used to be overloaded for the ramdisk driver to free the whole
ramdisk, which was completely different behavior compared to all other
drivers.  But this magic overload got removed in commit ff269568
("brd: remove support for BLKFLSBUF"), so this call is entirely
pointless now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the special handling for multiple floppies in the initrd code.
No one should be using floppies for booting these days. (famous last
words..)

Includes a spelling fix from Colin Ian King <colin.king@canonical.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

md_setup_drive knows it works with md devices, so it is rather pointless
to open a file descriptor and issue ioctls.  Just call directly into the
relevant low-level md routines after getting a handle to the device using
blkdev_get_by_dev instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: NeilBrown <neilb@suse.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>