- 29 Jul, 2013 3 commits
-
-
-
Stanislaw Gruszka authored
Since we clear QUEUE_STARTED in rt2x00queue_stop_queue(), following call to rt2x00queue_pause_queue() reduce to noop, i.e we do not stop queue in mac80211. To fix that introduce rt2x00queue_pause_queue_nocheck() function, which will stop queue in mac80211 directly. Note that rt2x00_start_queue() explicitly set QUEUE_PAUSED bit. Note also that reordering operations i.e. first call to rt2x00queue_pause_queue() and then clear QUEUE_STARTED bit, will race with rt2x00queue_unpause_queue(), so calling ieee80211_stop_queue() directly is the only available solution to fix the problem without major rework. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
- 26 Jul, 2013 6 commits
-
-
Arend van Spriel authored
When the brcmfmac device is physically removed cfg80211 gives a warning upon unregistering the net device (see below). [23052.390197] WARNING: CPU: 0 PID: 30 at net/wireless/core.c:937 cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211]() [23052.400843] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) pl2303 usbserial binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event lpc_ich snd_seq snd_timer snd_seq_device snd psmouse mfd_core serio_raw soundcore snd_page_alloc intel_ips dell_laptop dell_wmi sparse_keymap dcdbas nouveau ttm drm_kms_helper drm i2c_algo_bit mxm_wmi ahci libahci sdhci_pci firewire_ohci firewire_core sdhci crc_itu_t mmc_core intel_agp intel_gtt e1000e ptp pps_core agpgart video [last unloaded: brcmfmac] [23052.452987] CPU: 0 PID: 30 Comm: khubd Tainted: G O 3.11.0-rc1-wl-testing-lockdep-00002-g41cc093-dirty #1 [23052.463480] Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011 [23052.470852] 00000000 00000000 f4efdc18 c1522e3d f845bed2 f4efdc48 c103fbe4 c16a9254 [23052.478762] 00000000 0000001e f845bed2 000003a9 f841da44 f841da44 f3790004 f25539c0 [23052.486741] e2700200 f4efdc58 c103fc22 00000009 00000000 f4efdcc0 f841da44 00000002 [23052.494712] Call Trace: [23052.497165] [<c1522e3d>] dump_stack+0x4b/0x66 [23052.501685] [<c103fbe4>] warn_slowpath_common+0x84/0xa0 [23052.507085] [<f841da44>] ? cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.514542] [<f841da44>] ? cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.521981] [<c103fc22>] warn_slowpath_null+0x22/0x30 [23052.527191] [<f841da44>] cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.534494] [<c150abe8>] ? packet_notifier+0xc8/0x1d0 [23052.539703] [<c150abfc>] ? packet_notifier+0xdc/0x1d0 [23052.544880] [<c150ab20>] ? packet_seq_stop+0x30/0x30 [23052.550002] [<c152d655>] notifier_call_chain+0x45/0x60 [23052.555298] [<c106839f>] raw_notifier_call_chain+0x1f/0x30 [23052.560963] [<c143c693>] call_netdevice_notifiers_info+0x33/0x70 [23052.567153] [<c1459869>] ? qdisc_destroy+0x99/0xb0 [23052.572116] [<c143c6e3>] call_netdevice_notifiers+0x13/0x20 [23052.577861] [<c143df93>] rollback_registered_many+0xf3/0x1d0 [23052.583687] [<c1524cfc>] ? mutex_lock_nested+0x25c/0x350 [23052.589150] [<c143e0f4>] rollback_registered+0x24/0x40 [23052.594445] [<c143e15f>] unregister_netdevice_queue+0x4f/0xb0 [23052.600344] [<c143e299>] unregister_netdev+0x19/0x30 [23052.605484] [<f865b38f>] brcmf_del_if+0xbf/0x160 [brcmfmac] [23052.611223] [<f865b7ae>] brcmf_detach+0x5e/0xd0 [brcmfmac] [23052.616881] [<f8667413>] brcmf_usb_disconnect+0x63/0xa0 [brcmfmac] [23052.623217] [<c13e09aa>] usb_unbind_interface+0x4a/0x180 When the device is physically connected the driver sends a disassoc command to the device and response triggers the driver to inform cfg80211 about it. However, with the device removed the disassoc command fails. This patch adds a call to cfg80211_disconnected() when that command fails. The warning was added by commit below and also cleans up, but better doing it in the driver if only to get rid of the warning. commit f9bef3df Author: Ben Greear <greearb@candelatech.com> Date: Wed Jun 19 14:06:26 2013 -0700 wireless: check for dangling wdev->current_bss pointer Cc: Ben Greear <greearb@candelatech.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomasz Moń authored
Both type and pkt_len variables are in host endian and these should be in Little Endian in the payload. Signed-off-by: Tomasz Moń <desowin@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Cc: <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When a not fully started aggregation session is destroyed and flushed, we get a warning, e.g. WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160 queue 16 not used Modules linked in: [...] Pid: 5135, comm: hostapd Tainted: G W O 3.5.0 #10 Call Trace: wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3 [<ffffffff81036492>] warn_slowpath_common+0x72/0xa0 [<ffffffff81036577>] warn_slowpath_fmt+0x47/0x50 [<ffffffffa0368d6c>] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi] [<ffffffffa03a2099>] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm] [<ffffffffa0396c43>] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm] [<ffffffffa0293ad3>] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211] [<ffffffffa0294ed8>] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211] [<ffffffffa029159f>] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211] [<ffffffffa028a686>] __sta_info_destroy+0x66/0x370 [mac80211] [<ffffffffa028abb4>] sta_info_destroy_addr_bss+0x44/0x70 [mac80211] [<ffffffffa02a3e26>] ieee80211_del_station+0x26/0x50 [mac80211] [<ffffffffa01e6395>] nl80211_del_station+0x85/0x200 [cfg80211] when a station deauthenticated from us without fully setting up the aggregation session. Fix this by checking the aggregation state before removing the hardware queue. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Ilan Peer authored
The managed interface PS was not disabled when a GO interface was added. As a consequence, when the station VMAC was in PS, the GO also was not on the medium. Fix this. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
This allows to clean all kinds of bad state it might be in. This solves situation where HW RFkill was switched while the NIC was offline. Until now, we relied on the firmware to do clean the interrupt, but new firmwares don't do that any more. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 24 Jul, 2013 2 commits
-
-
David Spinadel authored
Set SSID bitmap for direct scan even on passive channels, for the passive-to-active feature. Without this patch only the SSID from probe request template is sent on passive channels, after passive-to-active switching, causing us to not find all desired networks. Remove the unused passive scan mask constant. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Unfortunately, the firmware only supports replay counters for a single GTK in D3, so that we should only upload the last key and use its replay counters. Since mac80211 key iteration will walk through the keys in order of their addition, simply use the same HW key index (1) for all GTKs, thus overwriting previous ones with newer ones. The replay counters for it are already used. Reviewed-by: Yaron Vaknin <Yaron.Vaknin@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 22 Jul, 2013 13 commits
-
-
Arend van Spriel authored
To avoid ending up in a NULL-pointer access, the function brcmf_txflowblock_if() should only be called for interfaces that have a netdev associated with it. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
If the transmit fails because there are no hanger slots or any other reason and the packet was an EAPOL packet the pending counter should be decreased although it was not transmitted so the driver does not end up in a dead-lock. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Building driver wil6210 in 3.10 and 3.11 kernels yields the following errors: CC [M] drivers/net/wireless/ath/wil6210/debugfs.o drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_print_ring': drivers/net/wireless/ath/wil6210/debugfs.c:163:11: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_txdesc_debugfs_show': drivers/net/wireless/ath/wil6210/debugfs.c:429:10: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] sizeof(printbuf), false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ cc1: all warnings being treated as errors make[5]: *** [drivers/net/wireless/ath/wil6210/debugfs.o] Error 1 make[4]: *** [drivers/net/wireless/ath/wil6210] Error 2 make[3]: *** [drivers/net/wireless/ath] Error 2 make[2]: *** [drivers/net/wireless] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 These errors are fixed by changing the type of the buffer from "unsigned char *" to "char *". Reported-by: Thomas Fjellstrom <thomas@fjellstrom.ca> Tested-by: Thomas Fjellstrom <thomas@fjellstrom.ca> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.10] Cc: Thomas Fjellstrom <thomas@fjellstrom.ca> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Solomon Peachy authored
In monitor mode, priv->vif is NULL, but at one point in the receive path we blindly attempt to dereference it. Add a test to prevent this. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Currently ath9k_htc will reboot firmware only if interface was ever started. Which lead to the problem in case where interface was never started but module need to be reloaded. This patch will partially fix bug "ath9k_htc: Target is unresponsive" https://github.com/qca/open-ath9k-htc-firmware/issues/1 Reproduction case: - plug adapter - make sure nothing will touch it. Stop Networkmanager or blacklist mac address of this adapter. - rmmod ath9k_htc; sleep 1; modprobe ath9k_htc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1Tested-by: Bo Shi <cnshibo@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Daniel Drake authored
During tear down (e.g. mwifiex_sdio_remove during system suspend), mwifiex left IRQs enabled for a significant period of time when it was unable to handle them correctly. This caused interrupt storms and interfered with the bluetooth interface on the same SDIO card. Solve this by disabling interrupts at the point when they can no longer be handled correctly, which is at the start of mwifiex_remove_card(). For cleanliness, we now enable interrupts in the mwifiex_add_card() path, to be symmetrical with the disabling of interrupts. We also couple the registration of the sdio IRQ handler with the actual enable/disable of interrupts at the hardware level. I also removed a write to this register in mwifiex_init_sdio which seemed pointless and won't cause any ill effects now that we only register the SDIO IRQ handler when we are ready to accept interrupts. Includes some corrections from Amitkumar Karwar. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
-
Emmanuel Grumbach authored
This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577 Cc: <stable@vger.kernel.org> [all versions] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Kalle Valo authored
The git tree is in github.com nowadays. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
I forgot to add an entry to MAINTAINERS when submitting the driver. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_htt_rx_ring_free': drivers/net/wireless/ath/ath10k/htt_rx.c:113: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_htt_rx_amsdu_pop': drivers/net/wireless/ath/ath10k/htt_rx.c:296: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/htt_rx.c:389: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `__ath10k_htt_rx_ring_fill_n': drivers/net/wireless/ath/ath10k/htt_rx.c:146: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/htt_rx.c:150: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_htt_rx_attach': drivers/net/wireless/ath/ath10k/htt_rx.c:474: undefined reference to `dma_alloc_coherent' drivers/net/wireless/ath/ath10k/htt_rx.c:509: undefined reference to `dma_free_coherent' drivers/net/wireless/ath/ath10k/htt_rx.c:514: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ath10k_htt_rx_detach': drivers/net/wireless/ath/ath10k/htt_rx.c:220: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/htt_rx.c:228: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 18 Jul, 2013 5 commits
-
-
Sujith Manoharan authored
The multicast search bit is disabled for the AR9003 family, but this is required for AR9002 too. Fix this in the INI override routine. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
The present build configuration for the rtlwifi family of drivers will fail under two known conditions: (1) If rtlwifi is selected without selecting any of the dependent drivers, there are errors in the build. (2) If the PCI drivers are built into the kernel and the USB drivers are modules, or vice versa, there are missing globals. The first condition is fixed by never building rtlwifi unless at least one of the device drivers is selected. The second failure is fixed by splitting the PCI and USB codes out of rtlwifi, and creating their own mini drivers. If the drivers that use them are modules, they will also be modules. Although a number of files are touched by this patch, only Makefile and Kconfig have undergone significant changes. The only modifications to the other files were to export entry points needed by the new rtl_pci and rtl_usb units, or to rename two variables that had names that were likely to cause namespace collisions. Reported-by: Fengguang Wu <fengguang.wu@intel.com> [Condition 1] Reported-by: Ben Hutchings <bhutchings@solarflare.com> [Condition 2] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bob Copeland authored
Bit 32 was always set which looks to have been accidental, according to git history. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/built-in.o: In function `rt2x00queue_unmap_skb': drivers/net/wireless/rt2x00/rt2x00queue.c:129: undefined reference to `dma_unmap_single' drivers/net/wireless/rt2x00/rt2x00queue.c:133: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `rt2x00queue_map_txskb': drivers/net/wireless/rt2x00/rt2x00queue.c:112: undefined reference to `dma_map_single' drivers/net/wireless/rt2x00/rt2x00queue.c:115: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `rt2x00queue_alloc_rxskb': drivers/net/wireless/rt2x00/rt2x00queue.c:93: undefined reference to `dma_map_single' drivers/net/wireless/rt2x00/rt2x00queue.c:95: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arnd Bergmann authored
The ARM OABI and EABI disagree on the alignment of structures with small members, so module init tools may interpret the ssb device table incorrectly, as shown by this warning when building the b43 device driver in an OABI kernel: FATAL: drivers/net/wireless/b43/b43: sizeof(struct ssb_device_id)=6 is not a modulo of the size of section __mod_ssb_device_table=88. Forcing the default (EABI) alignment on the structure makes this problem go away. Since the ssb_device_id may have the same problem, better fix both structures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: John W. Linville <linville@tuxdriver.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 17 Jul, 2013 3 commits
-
-
Alexey Khoroshilov authored
ath9k_hif_usb_probe() requests firmware asynchronically and there is some initialization postponed till firmware is ready. In particular, ath9k_hif_usb_firmware_cb() callback initializes hif_dev->tx.tx_buf and hif_dev->tx.tx_pending lists. At the same time, ath9k_hif_usb_suspend() iterates that lists through ath9k_hif_usb_dealloc_urbs(). If suspend happens before request_firmware_nowait() callback is called, it can lead to oops. Similar issue could be in ath9k_hif_usb_disconnect(), but it is prevented using hif_dev->fw_done completion and HIF_USB_READY flag. The patch extends this approach to suspend() as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
When dropping packets that have gone far enough into the tx path, the pending frame counter needs to be decreased. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Commit a269913c entitled "rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue" has two bugs for USB drivers. Firstly, the work queue in question was not initialized. Secondly, the callback routine used by this queue is contained within the file used for PCI devices. As a result, it is not available for architectures without PCI hardware. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Stable <stable@vger.kernel.org> [3.10] Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 16 Jul, 2013 8 commits
-
-
Felix Fietkau authored
When priv_sta == NULL, mi->prev_sample is dereferenced too early. Move the assignment further down, after the rate_control_send_low call. Reported-by: Krzysztof Mazur <krzysiek@podlesie.net> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
David Spinadel authored
Bits 1-21 in this channel type attributes are indication for which SSID is going to be sent on this channel. Since the first SSID is sent implicitly in the probe request, we don't need to toggle its bit here. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
David Spinadel authored
Increment index in each iteration. Without this increment we are overriding the added SSIDs and we will send only the last SSId and (n_ssids - 1) broadcast probes. Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Due to a firmware bug, it crashes when the beacon interval is smaller than 16. Avoid this by refusing the station state change creating the AP station, causing mac80211 to abandon the attempt to connect to the AP, and eventually wpa_s to blacklist it. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
The firmware / HW can't support more than 16 Rx BA sessions. Deny any attemps to open more sessions than that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
-
Emmanuel Grumbach authored
We didn't release the Rx AMPDU ressources properly. This bug led to firmware assert after 16 BA sessions. Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
-
Alexander Bondar authored
Avoid creating VIF specific debugfs directory if already exist. This may happen when, for example, resetting hw, suspend-resume. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
-
Johannes Berg authored
The BT_CONFIG command that is sent to the device during startup will enable BT coex unless the module parameter turns it off, but on devices without Bluetooth this may cause problems, as reported in Redhat BZ 885407. Fix this by sending the BT_CONFIG command only when the device has Bluetooth. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
-