- 05 Nov, 2014 40 commits
-
-
Nadav Amit authored
commit 234f3ce4 upstream. Before changing rip (during jmp, call, ret, etc.) the target should be asserted to be canonical one, as real CPUs do. During sysret, both target rsp and rip should be canonical. If any of these values is noncanonical, a #GP exception should occur. The exception to this rule are syscall and sysenter instructions in which the assigned rip is checked during the assignment to the relevant MSRs. This patch fixes the emulator to behave as real CPUs do for near branches. Far branches are handled by the next patch. This fixes CVE-2014-3647. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.2: - Adjust context - Use ctxt->regs[] instead of reg_read(), reg_write(), reg_rmw()] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Nadav Amit authored
commit 05c83ec9 upstream. Relative jumps and calls do the masking according to the operand size, and not according to the address size as the KVM emulator does today. This patch fixes KVM behavior. Signed-off-by:
-
Takuya Yoshikawa authored
commit d4ddafcd upstream. CALL: E8 Signed-off-by:
Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Petr Matousek authored
commit a642fc30 upstream. On systems with invvpid instruction support (corresponding bit in IA32_VMX_EPT_VPID_CAP MSR is set) guest invocation of invvpid causes vm exit, which is currently not handled and results in propagation of unknown exit to userspace. Fix this by installing an invvpid vm exit handler. This is CVE-2014-3646. Signed-off-by:
Petr Matousek <pmatouse@redhat.com> Signed-off-by:
-
Nadav Har'El authored
commit bfd0a56b upstream. If we let L1 use EPT, we should probably also support the INVEPT instruction. In our current nested EPT implementation, when L1 changes its EPT table for L2 (i.e., EPT12), L0 modifies the shadow EPT table (EPT02), and in the course of this modification already calls INVEPT. But if last level of shadow page is unsync not all L1's changes to EPT12 are intercepted, which means roots need to be synced when L1 calls INVEPT. Global INVEPT should not be different since roots are synced by kvm_mmu_load() each time EPTP02 changes. Reviewed-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
Nadav Har'El <nyh@il.ibm.com> Signed-off-by:
Jun Nakajima <jun.nakajima@intel.com> Signed-off-by:
Xinhao Xu <xinhao.xu@intel.com> Signed-off-by:
Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Andy Honig authored
commit 2febc839 upstream. There's a race condition in the PIT emulation code in KVM. In __kvm_migrate_pit_timer the pit_timer object is accessed without synchronization. If the race condition occurs at the wrong time this can crash the host kernel. This fixes CVE-2014-3611. Signed-off-by:
Andrew Honig <ahonig@google.com> Signed-off-by:
-
Nadav Amit authored
commit 854e8bb1 upstream. Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is written to certain MSRs. The behavior is "almost" identical for AMD and Intel (ignoring MSRs that are not implemented in either architecture since they would anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if non-canonical address is written on Intel but not on AMD (which ignores the top 32-bits). Accordingly, this patch injects a #GP on the MSRs which behave identically on Intel and AMD. To eliminate the differences between the architecutres, the value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to canonical value before writing instead of injecting a #GP. Some references from Intel and AMD manuals: According to Intel SDM description of WRMSR instruction #GP is expected on WRMSR "If the source register contains a non-canonical address and ECX specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE, IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP." According to AMD manual instruction manual: LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the LSTAR and CSTAR registers. If an RIP written by WRMSR is not in canonical form, a general-protection exception (#GP) occurs." IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the base field must be in canonical form or a #GP fault will occur." IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must be in canonical form." This patch fixes CVE-2014-3610. Signed-off-by:
-
Hannes Frederic Sowa authored
commit 916e4cf4 upstream. Currently we generate a new fragmentation id on UFO segmentation. It is pretty hairy to identify the correct net namespace and dst there. Especially tunnels use IFF_XMIT_DST_RELEASE and thus have no skb_dst available at all. This causes unreliable or very predictable ipv6 fragmentation id generation while segmentation. Luckily we already have pregenerated the ip6_frag_id in ip6_ufo_append_data and can use it here. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust filename, indentation] Signed-off-by:
-
Theodore Ts'o authored
commit c99d1e6e upstream. If we suffer a block allocation failure (for example due to a memory allocation failure), it's possible that we will call ext4_discard_allocated_blocks() before we've actually allocated any blocks. In that case, fe_len and fe_start in ac->ac_f_ex will still be zero, and this will result in mb_free_blocks(inode, e4b, 0, 0) triggering the BUG_ON on mb_free_blocks(): BUG_ON(last >= (sb->s_blocksize << 3)); Fix this by bailing out of ext4_discard_allocated_blocks() if fs_len is zero. Also fix a missing ext4_mb_unload_buddy() call in ext4_discard_allocated_blocks(). Google-Bug-Id: 16844242 Fixes: 86f0afd4Signed-off-by:
Theodore Ts'o <tytso@mit.edu> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
chenweilong authored
It fix the bug 67951 on bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=67951 The patch can't be applied directly, as it' used the function introduced by "commit 94e187c0" ip6_rt_put(), that patch can't be applied directly either. ==================== From: Gao feng <gaofeng@cn.fujitsu.com> commit 33d99113 upstream. This commit don't have a stable tag, but it fix the bug no reply after loopback down-up.It's very worthy to be applied to stable 3.4 kernels. The bug is 67951 on bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=67951 CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
Weilong Chen <chenweilong@huawei.com> Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Acked-by:
-
Marcelo Ricardo Leitner authored
Further tests revealed that after moving the garbage collector to a work queue and protecting it with a spinlock may leave the system prone to soft lockups if bottom half gets very busy. It was reproced with a set of firewall rules that REJECTed packets. If the NIC bottom half handler ends up running on the same CPU that is running the garbage collector on a very large cache, the garbage collector will not be able to do its job due to the amount of work needed for handling the REJECTs and also won't reschedule. The fix is to disable bottom half during the garbage collecting, as it already was in the first place (most calls to it came from softirqs). Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by:
-
Marcelo Ricardo Leitner authored
When rt_intern_hash() has to deal with neighbour cache overflowing, it triggers the route cache garbage collector in an attempt to free some references on neighbour entries. Such call cannot be done async but should also not run in parallel with an already-running one, so that they don't collapse fighting over the hash lock entries. This patch thus blocks parallel executions with spinlocks: - A call from worker and from rt_intern_hash() are not the same, and cannot be merged, thus they will wait each other on rt_gc_lock. - Calls to gc from rt_intern_hash() may happen in parallel but we must wait for it to finish in order to try again. This dedup and synchrinozation is then performed by the locking just before calling __do_rt_garbage_collect(). Signed-off-by:
-
Marcelo Ricardo Leitner authored
Currently the route garbage collector gets called by dst_alloc() if it have more entries than the threshold. But it's an expensive call, that don't really need to be done by then. Another issue with current way is that it allows running the garbage collector with the same start parameters on multiple CPUs at once, which is not optimal. A system may even soft lockup if the cache is big enough as the garbage collectors will be fighting over the hash lock entries. This patch thus moves the garbage collector to run asynchronously on a work queue, much similar to how rt_expire_check runs. There is one condition left that allows multiple executions, which is handled by the next patch. Signed-off-by:
-
Yoichi Yuasa authored
commit 5596b0b2 upstream. [ 1.904000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.908000] Modules linked in: [ 1.916000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-lemote-los.git-5318619-dirty #1 [ 1.920000] Stack : 0000000031aac000 ffffffff810d0000 0000000000000052 ffffffff802730a4 0000000000000000 0000000000000001 ffffffff810cdf90 ffffffff810d0000 ffffffff8068b968 ffffffff806f5537 ffffffff810cdf90 980000009f0782e8 0000000000000001 ffffffff80720000 ffffffff806b0000 980000009f078000 980000009f290000 ffffffff805f312c 980000009f05b5d8 ffffffff80233518 980000009f05b5e8 ffffffff80274b7c 980000009f078000 ffffffff8068b968 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 980000009f05b520 0000000000000000 ffffffff805f2f6c 0000000000000000 ffffffff80700000 ffffffff80700000 ffffffff806fc758 ffffffff80700000 ffffffff8020be98 ffffffff806fceb0 ffffffff805f2f6c ... [ 2.028000] Call Trace: [ 2.032000] [<ffffffff8020be98>] show_stack+0x80/0x98 [ 2.036000] [<ffffffff805f2f6c>] __schedule_bug+0x44/0x6c [ 2.040000] [<ffffffff805fac58>] __schedule+0x518/0x5b0 [ 2.044000] [<ffffffff805f8a58>] schedule_timeout+0x128/0x1f0 [ 2.048000] [<ffffffff80240314>] msleep+0x3c/0x60 [ 2.052000] [<ffffffff80495400>] do_probe+0x238/0x3a8 [ 2.056000] [<ffffffff804958b0>] ide_probe_port+0x340/0x7e8 [ 2.060000] [<ffffffff80496028>] ide_host_register+0x2d0/0x7a8 [ 2.064000] [<ffffffff8049c65c>] ide_pci_init_two+0x4e4/0x790 [ 2.068000] [<ffffffff8049f9b8>] amd74xx_probe+0x148/0x2c8 [ 2.072000] [<ffffffff803f571c>] pci_device_probe+0xc4/0x130 [ 2.076000] [<ffffffff80478f60>] driver_probe_device+0x98/0x270 [ 2.080000] [<ffffffff80479298>] __driver_attach+0xe0/0xe8 [ 2.084000] [<ffffffff80476ab0>] bus_for_each_dev+0x78/0xe0 [ 2.088000] [<ffffffff80478468>] bus_add_driver+0x230/0x310 [ 2.092000] [<ffffffff80479b44>] driver_register+0x84/0x158 [ 2.096000] [<ffffffff80200504>] do_one_initcall+0x104/0x160 Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Josh Triplett authored
commit 361e9dfb upstream. The buffers sized by CONFIG_LOG_BUF_SHIFT and CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't ask about their size at all. Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> [bwh: Backported to 3.2: drop change to CONFIG_LOG_CPU_MAX_BUF_SHIFT] Signed-off-by:
-
Peter Zijlstra authored
commit 6c72e350 upstream. Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by calling perf_event_free_task() when failing sched_fork() we will not yet have done the memset() on ->perf_event_ctxp[] and will therefore try and 'free' the inherited contexts, which are still in use by the parent process. This is bad.. Suggested-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mel Gorman authored
commit d3cb8bf6 upstream. A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed as mprotect marks write-migration-entries as read. It means that potentially we take a spurious fault to mark PTEs write again but it's straight-forward. However, there is a race between write migrations being marked read and migrations finishing. This potentially allows a PTE to be write that should have been read. Close this race by double checking the VMA permissions using maybe_mkwrite when migration completes. [torvalds@linux-foundation.org: use maybe_mkwrite] Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit b928095b upstream. If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Joseph Qi authored
commit 5760a97c upstream. There is a deadlock case which reported by Guozhonghua: https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html This case is caused by &res->spinlock and &dlm->master_lock misordering in different threads. It was introduced by commit 8d400b81 ("ocfs2/dlm: Clean up refmap helpers"). Since lockres is new, it doesn't not require the &res->spinlock. So remove it. Fixes: 8d400b81 ("ocfs2/dlm: Clean up refmap helpers") Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
joyce.xue <xuejiufei@huawei.com> Reported-by:
Guozhonghua <guozhonghua@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Andreas Rohner authored
commit 56d7acc7 upstream. This bug leads to reproducible silent data loss, despite the use of msync(), sync() and a clean unmount of the file system. It is easily reproducible with the following script: ----------------[BEGIN SCRIPT]-------------------- mkfs.nilfs2 -f /dev/sdb mount /dev/sdb /mnt dd if=/dev/zero bs=1M count=30 of=/mnt/testfile umount /mnt mount /dev/sdb /mnt CHECKSUM_BEFORE="$(md5sum /mnt/testfile)" /root/mmaptest/mmaptest /mnt/testfile 30 10 5 sync CHECKSUM_AFTER="$(md5sum /mnt/testfile)" umount /mnt mount /dev/sdb /mnt CHECKSUM_AFTER_REMOUNT="$(md5sum /mnt/testfile)" umount /mnt echo "BEFORE MMAP:\t$CHECKSUM_BEFORE" echo "AFTER MMAP:\t$CHECKSUM_AFTER" echo "AFTER REMOUNT:\t$CHECKSUM_AFTER_REMOUNT" ----------------[END SCRIPT]-------------------- The mmaptest tool looks something like this (very simplified, with error checking removed): ----------------[BEGIN mmaptest]-------------------- data = mmap(NULL, file_size - file_offset, PROT_READ | PROT_WRITE, MAP_SHARED, fd, file_offset); for (i = 0; i < write_count; ++i) { memcpy(data + i * 4096, buf, sizeof(buf)); msync(data, file_size - file_offset, MS_SYNC)) } ----------------[END mmaptest]-------------------- The output of the script looks something like this: BEFORE MMAP: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile AFTER MMAP: 6604a1c31f10780331a6850371b3a313 /mnt/testfile AFTER REMOUNT: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile So it is clear, that the changes done using mmap() do not survive a remount. This can be reproduced a 100% of the time. The problem was introduced in commit 136e8770 ("nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary"). If the page was read with mpage_readpage() or mpage_readpages() for example, then it has no buffers attached to it. In that case page_has_buffers(page) in nilfs_set_page_dirty() will be false. Therefore nilfs_set_file_dirty() is never called and the pages are never collected and never written to disk. This patch fixes the problem by also calling nilfs_set_file_dirty() if the page has no buffers attached to it. [akpm@linux-foundation.org: s/PAGE_SHIFT/PAGE_CACHE_SHIFT/] Signed-off-by:
Andreas Rohner <andreas.rohner@gmx.net> Tested-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Markos Chandras authored
commit 8a574cfa upstream. Every mcount() call in the MIPS 32-bit kernel is done as follows: [...] move at, ra jal _mcount addiu sp, sp, -8 [...] but upon returning from the mcount() function, the stack pointer is not adjusted properly. This is explained in details in 58b69401 (MIPS: Function tracer: Fix broken function tracing). Commit ad8c3969 ("MIPS: Unbreak function tracer for 64-bit kernel.) fixed the stack manipulation for 64-bit but it didn't fix it completely for MIPS32. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7792/Signed-off-by:
-
Robin Murphy authored
commit 5ca918e5 upstream. The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by:
Simon Hosie <simon.hosie@arm.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Wanpeng Li authored
commit 03bd4e1f upstream. The following bug can be triggered by hot adding and removing a large number of xen domain0's vcpus repeatedly: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group PGD 5a9d5067 PUD 13067 PMD 0 Oops: 0000 [#3] SMP [...] Call Trace: load_balance ? _raw_spin_unlock_irqrestore idle_balance __schedule schedule schedule_timeout ? lock_timer_base schedule_timeout_uninterruptible msleep lock_device_hotplug_sysfs online_store dev_attr_store sysfs_write_file vfs_write SyS_write system_call_fastpath Last level cache shared mask is built during CPU up and the build_sched_domain() routine takes advantage of it to setup the sched domain CPU topology. However, llc_shared_mask is not released during CPU disable, which leads to an invalid sched domainCPU topology. This patch fix it by releasing the llc_shared_mask correctly during CPU disable. Yasuaki also reported that this can happen on real hardware: https://lkml.org/lkml/2014/7/22/1018 His case is here: == Here is an example on my system. My system has 4 sockets and each socket has 15 cores and HT is enabled. In this case, each core of sockes is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-44, 90-104 Socket#3 | 45-59, 105-119 Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-44 and 90-104. When hot-removing socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30 remains having 0x3fff80000001fffc0000000. After that, when hot-adding socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-59 Socket#3 | 90-119 Then llc_shared_mask of CPU#30 becomes 0x3fff8000fffffffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-59 and 90-104. So the mask has the wrong value. Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Tested-by:
Linn Crosetto <linn@hp.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
John David Anglin authored
commit d26a7730 upstream. In spite of what the GCC manual says, the -mfast-indirect-calls has never been supported in the 64-bit parisc compiler. Indirect calls have always been done using function descriptors irrespective of the -mfast-indirect-calls option. Recently, it was noticed that a function descriptor was always requested when the -mfast-indirect-calls option was specified. This caused problems when the option was used in application code and doesn't make any sense because the whole point of the option is to avoid using a function descriptor for indirect calls. Fixing this broke 64-bit kernel builds. I will fix GCC but for now we need the attached change. This results in the same kernel code as before. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Anton Altaparmakov authored
commit f2d5a944 upstream. On 32-bit architectures, the legacy buffer_head functions are not always handling the sector number with the proper 64-bit types, and will thus fail on 4TB+ disks. Any code that uses __getblk() (and thus bread(), breadahead(), sb_bread(), sb_breadahead(), sb_getblk()), and calls it using a 64-bit block on a 32-bit arch (where "long" is 32-bit) causes an inifinite loop in __getblk_slow() with an infinite stream of errors logged to dmesg like this: __find_get_block_slow() failed. block=6740375944, b_blocknr=2445408648 b_state=0x00000020, b_size=512 device sda1 blocksize: 512 Note how in hex block is 0x191C1F988 and b_blocknr is 0x91C1F988 i.e. the top 32-bits are missing (in this case the 0x1 at the top). This is because grow_dev_page() is broken and has a 32-bit overflow due to shifting the page index value (a pgoff_t - which is just 32 bits on 32-bit architectures) left-shifted as the block number. But the top bits to get lost as the pgoff_t is not type cast to sector_t / 64-bit before the shift. This patch fixes this issue by type casting "index" to sector_t before doing the left shift. Note this is not a theoretical bug but has been seen in the field on a 4TiB hard drive with logical sector size 512 bytes. This patch has been verified to fix the infinite loop problem on 3.17-rc5 kernel using a 4TB disk image mounted using "-o loop". Without this patch doing a "find /nt" where /nt is an NTFS volume causes the inifinite loop 100% reproducibly whilst with the patch it works fine as expected. Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Clemens Ladisch authored
commit a9960e6a upstream. The calculated frame size was wrong because snd_pcm_format_physical_width() actually returns the number of bits, not bytes. Use snd_pcm_format_size() instead, which not only returns bytes, but also simplifies the calculation. Fixes: 8bea869c ("ALSA: PCM midlevel: improve fifo_size handling") Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Dueck authored
commit e77980e5 upstream. In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). While there, add the missing error handling. Signed-off-by:
David Dueck <davidcdueck@googlemail.com> Signed-off-by:
Anthony Harivel <anthony.harivel@emtrion.de> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
commit de594488 upstream. After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid side effects when the RX-FIFO is full, this patch puts the TX mailbox into TX_INACTIVE mode in the transmission complete interrupt handler. This, of course, leaves a race window between the actual completion of the transmission and the handling of tx-complete interrupt. However this is the best we can do without busy polling the tx complete interrupt. Signed-off-by:
-
David Jander authored
commit 25e92445 upstream. This patch implements the workaround mentioned in ERR005829: ERR005829: FlexCAN: FlexCAN does not transmit a message that is enabled to be transmitted in a specific moment during the arbitration process. Workaround: The workaround consists of two extra steps after setting up a message for transmission: Step 8: Reserve the first valid mailbox as an inactive mailbox (CODE=0b1000). If RX FIFO is disabled, this mailbox must be message buffer 0. Otherwise, the first valid mailbox can be found using the "RX FIFO filters" table in the FlexCAN chapter of the chip reference manual. Step 9: Write twice INACTIVE code (0b1000) into the first valid mailbox. Signed-off-by:
David Jander <david@protonic.nl> Signed-off-by:
-
David Jander authored
commit fc05b884 upstream. Apparently mailboxes may contain random data at startup, causing some of them being prepared for message reception. This causes overruns being missed or even confusing the IRQ check for trasmitted messages, increasing the transmit counter instead of the error counter. This patch initializes all mailboxes after the FIFO as RX_INACTIVE. Signed-off-by:
-
Marc Kleine-Budde authored
commit c32fe4ad upstream. This patch fixes the initialization of the TX mailbox. It is now correctly initialized as TX_INACTIVE not RX_EMPTY. Signed-off-by:
-
Johannes Berg authored
commit bd8c78e7 upstream. In testmode and vendor command reply/event SKBs we use the skb cb data to store nl80211 parameters between allocation and sending. This causes the code for CONFIG_NETLINK_MMAP to get confused, because it takes ownership of the skb cb data when the SKB is handed off to netlink, and it doesn't explicitly clear it. Clear the skb cb explicitly when we're done and before it gets passed to netlink to avoid this issue. Reported-by:
Assaf Azulay <assaf.azulay@intel.com> Reported-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Mark authored
commit c80b4495 upstream. This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB- SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI chain to be accessed. Without it only the (single) device with SCSI ID 0 can be used. The standalone converter sold by Entrega had model number U1-SC25. Xircom acquired Entrega and re-branded the product line PortGear. The PortGear USB to SCSI Converter (model PGSCSI) is internally identical to the Entrega product, but later models may use a different USB ID. The Entrega-branded units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and Macintosh drivers also support 085A:0028. Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac (8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may have initially used the same ID as the standalone U1-SC25 (1645:0007), but later production used 085A:0026. My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133 probably also exist. This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I couldn't find any mention of that actually existing in the wild; perhaps it was cancelled before release? Signed-off-by:
Mark Knibbs <markk@clara.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mark authored
commit b6a3ed67 upstream. Hi, The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g. iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM Microsystems chips. Only the connectors differ; both have the same USB ID. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have one of these, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the products use. Signed-off-by:
-
Mark authored
commit 67d365a5 upstream. The Adaptec USBConnect 2000 is another SCSI-USB converter which uses Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have a USBConnect 2000, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the product uses. Signed-off-by:
-
Mike Christie authored
commit db9bfd64 upstream. This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu. This function is used by iscsi drivers and userspace to send iscsi PDUs/ commands. For login commands, we have a set buffer size. For all other commands we do not support data buffers. This was reported by Dan Carpenter here: http://www.spinics.net/lists/linux-scsi/msg66838.htmlReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Trond Myklebust authored
commit cd9288ff upstream. James Drew reports another bug whereby the NFS client is now sending an OPEN_DOWNGRADE in a situation where it should really have sent a CLOSE: the client is opening the file for O_RDWR, but then trying to do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec. Reported-by:
James Drews <drews@engr.wisc.edu> Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu Fixes: aee7af35 (NFSv4: Fix problems with close in the presence...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Joern Engel authored
commit 8ae757d0 upstream. In iscsi_copy_param_list() a failed iscsi_param_list memory allocation currently invokes iscsi_release_param_list() to cleanup, and will promptly trigger a NULL pointer dereference. Instead, go ahead and return for the first iscsi_copy_param_list() failure case. Found by coverity. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit b53b0d99 upstream. This patch fixes a bug in iscsit_logout_post_handler_diffcid() where a pointer used as storage for list_for_each_entry() was incorrectly being used to determine if no matching entry had been found. This patch changes iscsit_logout_post_handler_diffcid() to key off bool conn_found to determine if the function needs to exit early. Reported-by:
-
Al Viro authored
commit 4023bfc9 upstream. in the former we simply check if dentry is still valid after picking its ->d_inode; in the latter we fetch ->d_inode in the same places where we fetch dentry and its ->d_seq, under the same checks. Signed-off-by:
-
