- 28 Dec, 2017 40 commits
-
-
David Lechner authored
This adds a restart function to the davinci watchdog timer driver. This is copied from arch/arm/mach-davinci/time.c and will allow us to remove the code from there. Signed-off-by:
David Lechner <david@lechnology.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
Corentin Labbe authored
All parameters of watchdog_init_timeout() are documented with exception of wdd, thus generating a build warning. This patch document it and so remove the following build warning: drivers/watchdog/watchdog_core.c:113: warning: No description found for parameter 'wdd' Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by:
-
Arnd Bergmann authored
The new hpwdt_my_nmi() function is used conditionally, which produces a harmless warning in some configurations: drivers/watchdog/hpwdt.c:478:12: error: 'hpwdt_my_nmi' defined but not used [-Werror=unused-function] This moves it inside of the #ifdef that protects its caller, to silence the warning. Fixes: 621174a92851 ("watchdog: hpwdt: Check source of NMI") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Benjamin Gaignard authored
Uniformize STMicroelectronics copyrights header Add SPDX identifier Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> CC: Yannick Fertre <yannick.fertre@st.com> Acked-by:
Yannick Fertre <yannick.fertre@st.com> Reviewed-by:
-
Greg Kroah-Hartman authored
There is no need to #define the license of the driver, just put it in the MODULE_LICENSE() line directly as a text string. This allows tools that check that the module license matches the source code license to work properly, as there is no need to unwind the unneeded dereference, especially when it is defined just a few lines above from where it is used. Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Reported-by:
Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Radu Rendec authored
The initial info message (early in the xen_wdt_init_module() function) is not very useful and we already have a message on successful probe. If the probe fails, additional messages are printed anyway. The version number serves no useful purpose and it ran out of favor upstream anyway. Signed-off-by:
Radu Rendec <rrendec@arista.com> Reviewed-by:
-
Radu Rendec authored
Change the xen_wdt driver to use the watchdog subsystem instead of registering and manipulating the char device directly through the misc API. This is mainly getting rid of the "write" and "ioctl" methods and part of the watchdog control logic (which are all implemented by the watchdog subsystem). Even though the watchdog subsystem supports registering and handling multiple watchdog devices at the same time, the xen_wdt driver has an inherent limitation of only one device due to the way the Xen hypervisor exposes watchdog functionality. However, the driver can now coexist with other watchdog devices (supported by different drivers). Signed-off-by:
-
Eric Long authored
This patch adds the watchdog driver for Spreadtrum SC9860 platform. Signed-off-by:
Eric Long <eric.long@spreadtrum.com> Reviewed-by:
-
Eric Long authored
This patch adds the documentation for Spreadtrum watchdog driver. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Christophe Leroy authored
The watchdog core includes a worker function which pings the watchdog until user app starts pinging it and which also pings it if the HW require more frequent pings. Use that function instead of the dedicated timer. In the mean time, we can allow the user to change the timeout. Then change the timeout module parameter to use seconds and use the watchdog_init_timeout() core function. On some HW (eg: the 8xx), SWCRR contains bits unrelated to the watchdog which have to be preserved upon write. This driver has nothing preventing the use of the magic close, so enable it. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
-
Rasmus Villemoes authored
The first patch above (https://patchwork.kernel.org/patch/9970181/) makes the oops go away, but it just papers over the problem. The real problem is that the watchdog core clears WDOG_HW_RUNNING in watchdog_stop, and the gpio driver fails to set it in its stop function when it doesn't actually stop it. This means that the core doesn't know that it now has responsibility for petting the device, in turn causing the device to reset the system (I hadn't noticed this because the board I'm working on has that reset logic disabled). How about this (other drivers may of course have the same problem, I haven't checked). One might say that ->stop should return an error when the device can't be stopped, but OTOH this brings parity between a device without a ->stop method and a GPIO wd that has always-running set. IOW, I think ->stop should only return an error when an actual attempt to stop the hardware failed. From: Rasmus Villemoes <rasmus.villemoes@prevas.dk> The watchdog framework clears WDOG_HW_RUNNING before calling ->stop. If the driver is unable to stop the device, it is supposed to set that bit again so that the watchdog core takes care of sending heart-beats while the device is not open from user-space. Update the gpio_wdt driver to honour that contract (and get rid of the redundant clearing of WDOG_HW_RUNNING). Fixes: 3c10bbde ("watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function") Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Geert Uytterhoeven authored
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car V3M (r8a77970) SoC. Restore sort order while at it. No driver update is needed. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Tomas Winkler authored
Fixes sparse warning: drivers/watchdog/mei_wdt.c:530:18: warning: Variable length array is used Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by:
-
Radu Rendec authored
The initial info message (early in the esb_probe() function) is not very useful and we already have a message on successful probe, which includes device identification. If the probe fails (e.g. PCI related errors), additional messages are printed anyway. The version number was only used in the initial info message. Other than that, it serves no useful purpose and it ran out of favor upstream anyway. Signed-off-by:
-
Radu Rendec authored
The minimum, maximum and default values for the watchdog heartbeat (timeout) were hardcoded in several places (including module parameter description and warning message for invalid module parameter value). This patch adds macros for the aforementioned values and replaces all occurences of hardcoded values by these macros. Signed-off-by:
-
Radu Rendec authored
Support multiple i6300esb devices simultaneously, by removing the single device restriction in the original design and leveraging the multiple device support of the watchdog subsystem. This patch replaces the global definitions of watchdog device data with a dynamically allocated structure. This structure is allocated during device probe, so multiple independent structures can be allocated if multiple devices are probed. Signed-off-by:
-
Radu Rendec authored
Change the i6300esb driver to use the watchdog subsystem instead of the legacy watchdog API. This is mainly just getting rid of the "write" and "ioctl" methods and part of the watchdog control logic (which are all implemented by the watchdog subsystem). Even though the watchdog subsystem supports registering and handling multiple watchdog devices at the same time, the i6300esb driver still has a limitation of only one i6300esb device due to some global variable usage that comes from the original design. However, the driver can now coexist with other watchdog devices (supported by different drivers). Signed-off-by:
-
Jerry Hoemann authored
Do not claim the NMI (i.e. return NMI_DONE) if the source of the NMI isn't the iLO watchdog or debug. Signed-off-by:
-
Corentin Labbe authored
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by:
-
Arnd Bergmann authored
The Xen watchdog driver uses __kernel_time_t and ktime_to_timespec() internally for managing its timeouts. Both are deprecated because of y2038 problems. The driver itself is fine, since it only uses monotonic times, but converting it to use ktime_get_seconds() avoids the deprecated interfaces and is slightly simpler. Signed-off-by:
-
Michael Grzeschik authored
This patch removes the windows protection routine that got now covered by the wdt core. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by:
-
Michael Grzeschik authored
The DA9062 watchdog occasionally enters error condition and resets the system if the timeout is changed quickly after the timer was enabled. The method of disabling and waiting for > 150 µs before setting the new timeout is taken from the DA9052 driver. Signed-off-by:
-
Michael Grzeschik authored
Register a restart handler for the da9062 watchdog. System restart is triggered by sending the shutdown command to the PMIC. As more-suitable restart handlers may exist, the priority of the watchdog restart handler is set to 128. Signed-off-by:
-
Linus Walleij authored
The Moxart does not appear to be using the interrupt from the watchdog timer, maybe it's not even routed, so as to support more architectures with this driver, make the interrupt optional. While we are at it: actually enable the use of the interrupt if present by setting the right bit in the control register and define the missing control register bits. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Linus Walleij authored
This renames all the driver files and symbols for the Gemini watchdog to FTWDT010 as it has been revealed that this IP block is a generic watchdog timer from Faraday Technology used in several SoC designs. Select this driver by default for the Gemini, it is a sensible driver to always have enabled. Signed-off-by:
-
Linus Walleij authored
The device tree bindings are in two copies and also should be consolidated into a single Faraday Technology FTWDT010 binding since we uncovered that this IP part is a standard IP from Faraday. Cc: devicetree@vger.kernel.org Acked-by:
-
Chris Packham authored
Correct typo in comment "insterted" -> "inserted". Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
-
Linus Walleij authored
This converts the GPIO watchdog driver to use GPIO descriptors instead of relying on the old method to read out GPIO numbers from the device tree and then using those with the old GPIO API. The descriptor API keeps track of whether the line is active low so we can remove all active low handling and rely on the GPIO descriptor to deal with this for us. Signed-off-by:
-
Linus Walleij authored
This add "dev" and "np" variables to make the probe() function a bit easier to read. Signed-off-by:
-
Oleksij Rempel authored
The only way of stopping the watchdog is by resetting it. Add the watchdog op for stopping the device and reset if a reset line is provided. At same time WDOG_HW_RUNNING should be remove from dw_wdt_start. As commented by Guenter Roeck: dw_wdt sets WDOG_HW_RUNNING in its open function. Result is that the kref_get() in watchdog_open() won't be executed. But then kref_put() in close will be called since the watchdog now does stop. This causes the imbalance. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Reviewed-by:
-
Andrew Jeffery authored
Probing at device_initcall time lead to perverse cases where the watchdog was probed after, say, I2C devices, which then leaves a potentially running watchdog at the mercy of I2C device behaviour and bus conditions. Load the watchdog driver early to ensure that the kernel is patting it well before initialising peripherals. Signed-off-by:
Andrew Jeffery <andrew@aj.id.au> Reviewed-by:
-
