- 07 Sep, 2016 40 commits
-
-
Dan Carpenter authored
commit e514cc0a upstream. The props->ap[] array is defined like this: struct alg_props ap[NX_MAX_FC][NX_MAX_MODE][3]; So we can see that if msc->fc and msc->mode are == to NX_MAX_FC or NX_MAX_MODE then we're off by one. Fixes: ae0222b7 ('powerpc/crypto: nx driver code supporting nx encryption') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Torokhov authored
commit 47af45d6 upstream. The commit 40974618 ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 40974618 ("Input: i8042 - break load dependency ...") Reported-by:
Bruno Wolff III <bruno@wolff.to> Tested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 40974618 upstream. As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we have a hard load dependency between i8042 and atkbd which prevents keyboard from working on Gen2 Hyper-V VMs. > hyperv_keyboard invokes serio_interrupt(), which needs a valid serio > driver like atkbd.c. atkbd.c depends on libps2.c because it invokes > ps2_command(). libps2.c depends on i8042.c because it invokes > i8042_check_port_owner(). As a result, hyperv_keyboard actually > depends on i8042.c. > > For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a > Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m > rather than =y, atkbd.ko can't load because i8042.ko can't load(due to > no i8042 device emulated) and finally hyperv_keyboard can't work and > the user can't input: https://bugs.archlinux.org/task/39820 > (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y) To break the dependency we move away from using i8042_check_port_owner() and instead allow serio port owner specify a mutex that clients should use to serialize PS/2 command stream. Reported-by:
Mark Laws <mdl@60hz.org> Tested-by:
-
Masahiro Yamada authored
commit fae16989 upstream. Commit fe6b0dfa ("Input: tegra-kbc - use reset framework") accidentally converted _deassert to _assert, so there is no code to wake up this hardware. Fixes: fe6b0dfa ("Input: tegra-kbc - use reset framework") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Thierry Reding <treding@nvidia.com> Acked-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
Jeff Mahoney authored
commit d2c609b8 upstream. The qgroup_flags field is overloaded such that it reflects the on-disk status of qgroups and the runtime state. The BTRFS_QGROUP_STATUS_FLAG_RESCAN flag is used to indicate that a rescan operation is in progress, but if the file system is unmounted while a rescan is running, the rescan operation is paused. If the file system is then mounted read-only, the flag will still be present but the rescan operation will not have been resumed. When we go to umount, btrfs_qgroup_wait_for_completion will see the flag and interpret it to mean that the rescan worker is still running and will wait for a completion that will never come. This patch uses a separate flag to indicate when the worker is running. The locking and state surrounding the qgroup rescan worker needs a lot of attention beyond this patch but this is enough to avoid a hung umount. Signed-off-by; Jeff Mahoney <jeffm@suse.com> Reviewed-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Jeff Mahoney authored
commit d06f23d6 upstream. We wait on qgroup rescan completion in three places: file system shutdown, the quota disable ioctl, and the rescan wait ioctl. If the user sends a signal while we're waiting, we continue happily along. This is expected behavior for the rescan wait ioctl. It's racy in the shutdown path but mostly works due to other unrelated synchronization points. In the quota disable path, it Oopses the kernel pretty much immediately. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
-
Vegard Nossum authored
commit 088bf2ff upstream. seq_read() is a nasty piece of work, not to mention buggy. It has (I think) an old bug which allows unprivileged userspace to read beyond the end of m->buf. I was getting these: BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880 Read of size 2713 by task trinity-c2/1329 CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: kasan_object_err+0x1c/0x80 kasan_report_error+0x2cb/0x7e0 kasan_report+0x4e/0x80 check_memory_region+0x13e/0x1a0 kasan_check_read+0x11/0x20 seq_read+0xcd2/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 entry_SYSCALL64_slow_path+0x25/0x25 Object at ffff880116889100, in cache kmalloc-4096 size: 4096 Allocated: PID = 1329 save_stack_trace+0x26/0x80 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 __kmalloc+0x1aa/0x4a0 seq_buf_alloc+0x35/0x40 seq_read+0x7d8/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 return_from_SYSCALL_64+0x0/0x6a Freed: PID = 0 (stack is not available) Memory state around the buggy address: ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint This seems to be the same thing that Dave Jones was seeing here: https://lkml.org/lkml/2016/8/12/334 There are multiple issues here: 1) If we enter the function with a non-empty buffer, there is an attempt to flush it. But it was not clearing m->from after doing so, which means that if we try to do this flush twice in a row without any call to traverse() in between, we are going to be reading from the wrong place -- the splat above, fixed by this patch. 2) If there's a short write to userspace because of page faults, the buffer may already contain multiple lines (i.e. pos has advanced by more than 1), but we don't save the progress that was made so the next call will output what we've already returned previously. Since that is a much less serious issue (and I have a headache after staring at seq_read() for the past 8 hours), I'll leave that for now. Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.comSigned-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Walleij authored
commit 2527ecc9 upstream. The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Wei Yongjun authored
commit 3295235f upstream. In case of error, the function usb_get_phy() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: b5a28756 ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS") Acked-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Yinghai Lu authored
commit e7f85168 upstream. Found one megaraid_sas HBA probe fails, [ 187.235190] scsi host2: Avago SAS based MegaRAID driver [ 191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io 0x0000-0x00ff] [ 191.120548] megaraid_sas 0000:89:00.0: IO memory region busy! and the card has resource like, [ 125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400 [ 125.104446] pci 0000:89:00.0: reg 0x10: [io 0x0000-0x00ff] [ 125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit] [ 125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit] [ 125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref] that does not io port resource allocated from BIOS, and kernel can not assign one as io port shortage. The driver is only looking for MEM, and should not fail. It turns out megasas_init_fw() etc are using bar index as mask. index 1 is used as mask 1, so that pci_request_selected_regions() is trying to request BAR0 instead of BAR1. Fix all related reference. Fixes: b6d5d880 ("megaraid_sas: Use lowest memory bar for SR-IOV VF support") Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Acked-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Greg Edwards authored
commit ce7c6c9e upstream. mpt3sas crashes on resume after suspend with WarpDrive flash cards. The reply_post_host_index array is not set back up after the resume, and we deference a stale pointer in _base_interrupt(). [ 47.309711] BUG: unable to handle kernel paging request at ffffc90001f8006c [ 47.318289] IP: [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas] [ 47.326749] PGD 41ccaa067 PUD 41ccab067 PMD 3466c067 PTE 0 [ 47.333848] Oops: 0002 [#1] SMP ... [ 47.452708] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0 #6 [ 47.460506] Hardware name: Dell Inc. OptiPlex 990/06D7TR, BIOS A18 09/24/2013 [ 47.469629] task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 [ 47.479112] RIP: 0010:[<ffffffffc00863ef>] [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas] [ 47.490466] RSP: 0018:ffff88041d203e30 EFLAGS: 00010002 [ 47.497801] RAX: 0000000000000001 RBX: ffff880033f4c000 RCX: 0000000000000001 [ 47.506973] RDX: ffffc90001f8006c RSI: 0000000000000082 RDI: 0000000000000082 [ 47.516141] RBP: ffff88041d203eb0 R08: ffff8804118e2820 R09: 0000000000000001 [ 47.525300] R10: 0000000000000001 R11: 00000000100c0000 R12: 0000000000000000 [ 47.534457] R13: ffff880412c487e0 R14: ffff88041a8987d8 R15: 0000000000000001 [ 47.543632] FS: 0000000000000000(0000) GS:ffff88041d200000(0000) knlGS:0000000000000000 [ 47.553796] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.561632] CR2: ffffc90001f8006c CR3: 0000000001c06000 CR4: 00000000000406f0 [ 47.570883] Stack: [ 47.575015] 000000001d211228 ffff88041d2100c0 ffff8800c47d8130 0000000000000100 [ 47.584625] ffff8804100c0000 100c000000000000 ffff88041a8992a0 ffff88041a8987f8 [ 47.594230] ffff88041d203e00 ffffffff81111e55 000000000000038c ffff880414ad4280 [ 47.603862] Call Trace: [ 47.608474] <IRQ> [ 47.610413] [<ffffffff81111e55>] ? call_timer_fn+0x35/0x120 [ 47.620539] [<ffffffff81100a1f>] handle_irq_event_percpu+0x7f/0x1c0 [ 47.629061] [<ffffffff81100b8c>] handle_irq_event+0x2c/0x50 [ 47.636859] [<ffffffff81103fff>] handle_edge_irq+0x6f/0x130 [ 47.644654] [<ffffffff8102fbf3>] handle_irq+0x73/0x120 [ 47.652011] [<ffffffff810c6ada>] ? atomic_notifier_call_chain+0x1a/0x20 [ 47.660854] [<ffffffff817e374b>] do_IRQ+0x4b/0xd0 [ 47.667777] [<ffffffff817e160c>] common_interrupt+0x8c/0x8c [ 47.675635] <EOI> Move the reply_post_host_index array setup into mpt3sas_base_map_resources(), which is also in the resume path. Signed-off-by:
Greg Edwards <gedwards@fireweed.org> Acked-by:
Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by:
-
Gavin Li authored
commit add12505 upstream. This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by:
Gavin Li <git@thegavinli.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Brian Norris authored
commit 4d01d880 upstream. cros_ec_cmd_xfer returns success status if the command transport completes successfully, but the execution result is incorrectly ignored. In many cases, the execution result is assumed to be successful, leading to ignored errors and operating on uninitialized data. We've recently introduced the cros_ec_cmd_xfer_status() helper to avoid these problems. Let's use it. [Regarding the 'Fixes' tag; there is significant refactoring since the driver's introduction, but the underlying logical error exists throughout I believe] Fixes: 9d230c9e ("i2c: ChromeOS EC tunnel driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Tomeu Vizoso authored
commit 9798ac6d upstream. So that callers of cros_ec_cmd_xfer() don't have to repeat boilerplate code when checking for errors from the EC side. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Tested-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Dave Carroll authored
commit fa00c437 upstream. In aacraid's ioctl_send_fib() we do two fetches from userspace, one the get the fib header's size and one for the fib itself. Later we use the size field from the second fetch to further process the fib. If for some reason the size from the second fetch is different than from the first fix, we may encounter an out-of- bounds access in aac_fib_send(). We also check the sender size to insure it is not out of bounds. This was reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was assigned CVE-2016-6480. Reported-by:
Pengfei Wang <wpengfeinudt@gmail.com> Fixes: 7c00ffa3 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)' Signed-off-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Vineet Gupta authored
commit 45c3b08a upstream. For resources shared by all cores such as SLC and IOC, only the master core needs to do any setups / enabling / disabling etc. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Daniel Mentz authored
commit 18b43e89 upstream. trace_hardirqs_on_caller() in lockdep.c expects to be called before, not after interrupts are actually enabled. The following comment in kernel/locking/lockdep.c substantiates this claim: " /* * We're enabling irqs and according to our state above irqs weren't * already enabled, yet we find the hardware thinks they are in fact * enabled.. someone messed up their IRQ state tracing. */ " An example can be found in include/linux/irqflags.h: do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0) Without this change, we hit the following DEBUG_LOCKS_WARN_ON. [ 7.760000] ------------[ cut here ]------------ [ 7.760000] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2711 resume_user_mode_begin+0x48/0xf0 [ 7.770000] DEBUG_LOCKS_WARN_ON(!irqs_disabled()) [ 7.780000] Modules linked in: [ 7.780000] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-00003-gc668bb9-dirty #366 [ 7.790000] [ 7.790000] Stack Trace: [ 7.790000] arc_unwind_core.constprop.1+0xa4/0x118 [ 7.800000] warn_slowpath_fmt+0x72/0x158 [ 7.800000] resume_user_mode_begin+0x48/0xf0 [ 7.810000] ---[ end trace 6f6a7a8fae20d2f0 ]--- Signed-off-by:
Daniel Mentz <danielmentz@google.com> Signed-off-by:
-
Liav Rehana authored
commit 86147e3c upstream. User mode callee regs are explicitly collected before signal delivery or breakpoint trap. r25 is special for kernel as it serves as task pointer, so user mode value is clobbered very early. It is saved in pt_regs where generally only scratch (aka caller saved) regs are saved. The code to access the corresponding pt_regs location had a subtle bug as it was using load/store with scaling of offset, whereas the offset was already byte wise correct. So fix this by replacing LD.AS with a standard LD Signed-off-by:
Liav Rehana <liavr@mellanox.com> Reviewed-by:
Alexey Brodkin <abrodkin@synopsys.com> [vgupta: rewrote title and commit log] Signed-off-by:
-
Vineet Gupta authored
commit 20d78037 upstream. ARC architecture has 2 instruction sets: ARCompact/ARCv2. While same gcc supports compiling for either (using appropriate toggles), we can't use the same toolchain to build kernel because libgcc needs to be unique and the toolchian (uClibc based) is not multilibed. uClibc toolchain is convenient since it allows all userspace and kernel to be built with a single install for an ISA. This however means 2 gnu installs (with same triplet prefix) are needed for building for 2 ISA and need to be in PATH. As developers we keep switching the builds, but would occassionally fail to update the PATH leading to usage of wrong tools. And this would only show up at the end of kernel build when linking incompatible libgcc. So the initial solution was to have gcc define a special preprocessor macro DEFAULT_CPU_xxx which is unique for default toolchain configuration. Claudiu proposed using grep for an existing preprocessor macro which is again uniquely defined per ISA. Cc: Michal Marek <mmarek@suse.cz> Suggested-by:
Claudiu Zissulescu <claziss@synopsys.com> Signed-off-by:
-
Matthew Auld authored
commit 3871f42a upstream. In i915_ggtt_cleanup_hw we need to remember to free aliasing_ppgtt. This fixes the following kmemleak message: unreferenced object 0xffff880213cca000 (size 8192): comm "modprobe", pid 1298, jiffies 4294745402 (age 703.930s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff817c808e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8121f9c2>] kmem_cache_alloc_trace+0x142/0x1d0 [<ffffffffa06d11ef>] i915_gem_init_ggtt+0x10f/0x210 [i915] [<ffffffffa06d71bb>] i915_gem_init+0x5b/0xd0 [i915] [<ffffffffa069749a>] i915_driver_load+0x97a/0x1460 [i915] [<ffffffffa06a26ef>] i915_pci_probe+0x4f/0x70 [i915] [<ffffffff81423015>] local_pci_probe+0x45/0xa0 [<ffffffff81424463>] pci_device_probe+0x103/0x150 [<ffffffff81515e6c>] driver_probe_device+0x22c/0x440 [<ffffffff81516151>] __driver_attach+0xd1/0xf0 [<ffffffff8151379c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff8151555e>] driver_attach+0x1e/0x20 [<ffffffff81514fa3>] bus_add_driver+0x1c3/0x280 [<ffffffff81516aa0>] driver_register+0x60/0xe0 [<ffffffff8142297c>] __pci_register_driver+0x4c/0x50 [<ffffffffa013605b>] 0xffffffffa013605b Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Fixes: b18b6bde ("drm/i915/bdw: Free PPGTT struct") Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470420280-21417-1-git-send-email-matthew.auld@intel.com (cherry picked from commit cb7f2760) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chunming Zhou authored
commit 1f703e66 upstream. Otherwise we may miss errors. Signed-off-by:
Chunming Zhou <David1.Zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
jimqu authored
commit 10ea9434 upstream. SDMA could be fail in the thaw() and restore() processes, do software reset if each SDMA engine is busy. Signed-off-by:
JimQu <Jim.Qu@amd.com> Reviewed-by:
-
Alex Deucher authored
commit 611a1507 upstream. No asics supported by amdgpu support analog TV. Workaround for bug: https://bugs.freedesktop.org/show_bug.cgi?id=97460Reviewed-by:
-
Alex Deucher authored
commit e1718d97 upstream. When looking up the connector type make sure the index is valid. Avoids a later crash if we read past the end of the array. Workaround for bug: https://bugs.freedesktop.org/show_bug.cgi?id=97460Reviewed-by:
-
Christian König authored
commit 815d27a4 upstream. This bug seems to be present for a very long time. Signed-off-by:
-
Felix Kuehling authored
commit cab0b8d5 upstream. The GART aperture size can be bigger than 4GB. Therefore the offset used in amdgpu_gart_bind and amdgpu_gart_unbind must be 64-bit. Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Brian Norris authored
commit fcf68f3c upstream. When using CONFIG_DEBUG_ATOMIC_SLEEP, the scheduler nicely points out that we're calling sleeping primitives within the wait_event loop, which means we might clobber the task state: [ 10.831289] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffc00026b610>] [ 10.845531] ------------[ cut here ]------------ [ 10.850161] WARNING: at kernel/sched/core.c:7630 ... [ 12.164333] ---[ end trace 45409966a9a76438 ]--- [ 12.168942] Call trace: [ 12.171391] [<ffffffc00024ed44>] __might_sleep+0x64/0x90 [ 12.176699] [<ffffffc000954774>] mutex_lock_nested+0x50/0x3fc [ 12.182440] [<ffffffc0007b9424>] iio_kfifo_buf_data_available+0x28/0x4c [ 12.189043] [<ffffffc0007b76ac>] iio_buffer_ready+0x60/0xe0 [ 12.194608] [<ffffffc0007b7834>] iio_buffer_read_first_n_outer+0x108/0x1a8 [ 12.201474] [<ffffffc000370d48>] __vfs_read+0x58/0x114 [ 12.206606] [<ffffffc000371740>] vfs_read+0x94/0x118 [ 12.211564] [<ffffffc0003720f8>] SyS_read+0x64/0xb4 [ 12.216436] [<ffffffc000203cb4>] el0_svc_naked+0x24/0x28 To avoid this, we should (a la https://lwn.net/Articles/628628/) use the wait_woken() function, which avoids the nested sleeping while still handling races between waiting / wake-events. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Wanpeng Li authored
commit 44496922 upstream. The following commit: 9642d18e ("nohz: Affine unpinned timers to housekeepers")' intended to affine unpinned timers to housekeepers: unpinned timers(full dynaticks, idle) => nearest busy housekeepers(otherwise, fallback to any housekeepers) unpinned timers(full dynaticks, busy) => nearest busy housekeepers(otherwise, fallback to any housekeepers) unpinned timers(houserkeepers, idle) => nearest busy housekeepers(otherwise, fallback to itself) However, the !idle_cpu(i) && is_housekeeping_cpu(cpu) check modified the intention to: unpinned timers(full dynaticks, idle) => any housekeepers(no mattter cpu topology) unpinned timers(full dynaticks, busy) => any housekeepers(no mattter cpu topology) unpinned timers(housekeepers, idle) => any busy cpus(otherwise, fallback to any housekeepers) This patch fixes it by checking if there are busy housekeepers nearby, otherwise falls to any housekeepers/itself. After the patch: unpinned timers(full dynaticks, idle) => nearest busy housekeepers(otherwise, fallback to any housekeepers) unpinned timers(full dynaticks, busy) => nearest busy housekeepers(otherwise, fallback to any housekeepers) unpinned timers(housekeepers, idle) => nearest busy housekeepers(otherwise, fallback to itself) Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> [ Fixed the changelog. ] Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 'commit 9642d18e ("nohz: Affine unpinned timers to housekeepers")' Link: http://lkml.kernel.org/r/1462344334-8303-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit 173be9a1 upstream. Mike reports: Roughly 10% of the time, ltp testcase getrusage04 fails: getrusage04 0 TINFO : Expected timers granularity is 4000 us getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)! getrusage04 0 TINFO : utime: 0us; stime: 179us getrusage04 0 TINFO : utime: 3751us; stime: 0us getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us: And tracked it down to the case where the task simply doesn't get _any_ [us]time ticks. Update the code to assume all rtime is utime when we lack information, thus ensuring a task that elides the tick gets time accounted. Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Tested-by:
-
Lucas Stach authored
commit 34276bb0 upstream. The called of_graph_get_next_endpoint() already decrements the refcount of the prev node, so it is wrong to do it again in the calling function. Use the for_each_endpoint_of_node() helper to interate through the endpoint OF nodes, which already does the right thing and simplifies the code a bit. Fixes: 8ccd0d0c (of: add helper for getting endpoint node of specific identifiers) Reported-by:
David Jander <david@protonic.nl> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Caesar Wang authored
commit 78ec79bf upstream. SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Felix Fietkau authored
commit 6b07d9ca upstream. The code currently assumes that buffered multicast PS frames don't have a pending ACK frame for tx status reporting. However, hostapd sends a broadcast deauth frame on teardown for which tx status is requested. This can lead to the "Have pending ack frames" warning on module reload. Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Stefan Haberland authored
commit 9ba333dc upstream. When a device is in a status where CIO has killed all I/O by itself the interrupt for a clear request may not contain an irb to determine the clear function. Instead it contains an error pointer -EIO. This was ignored by the DASD int_handler leading to a hanging device waiting for a clear interrupt. Handle -EIO error pointer correctly for requests that are clear pending and treat the clear as successful. Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Emmanouil Maroudas authored
commit 993f88f1 upstream. Fix typo in edac_inc_ue_error() to increment ue_noinfo_count instead of ce_noinfo_count. Signed-off-by:
Emmanouil Maroudas <emmanouil.maroudas@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 4275be63 ("edac: Change internal representation to work with layers") Link: http://lkml.kernel.org/r/1461425580-5898-1-git-send-email-emmanouil.maroudas@gmail.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Agrawal, Nitesh-kumar authored
commit 8cf43455 upstream. In the function amd_gpio_irq_enable() and amd_gpio_direction_input(), remove the code which is setting the default de-bounce time to 2.75ms. The driver code shall use the same settings as specified in BIOS. Any default assignment impacts TouchPad behaviour when the LevelTrig is set to EDGE FALLING. Reviewed-by:
Ken Xue <Ken.Xue@amd.com> Signed-off-by:
Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com> Signed-off-by:
-
Will Deacon authored
commit 5bc0a116 upstream. The disable_bypass cmdline option changes the SMMUv3 driver to put down faulting stream table entries by default, as opposed to bypassing transactions from unconfigured devices. In this mode of operation, it is entirely expected to see aborting entries in the stream table if and when we come to installing a valid translation, so don't trigger a BUG() as a result of misdiagnosing these entries as stream table corruption. Fixes: 48ec83bc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Tested-by:
Robin Murphy <robin.murphy@arm.com> Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit aea2037e upstream. In the unlikely event of a global command queue error, the ARM SMMUv3 driver attempts to convert the problematic command into a CMD_SYNC and resume the command queue. Unfortunately, this code is pretty badly broken: 1. It uses the index into the error string table as the CMDQ index, so we probably read the wrong entry out of the queue 2. The arguments to queue_write are the wrong way round, so we end up writing from the queue onto the stack. These happily cancel out, so the kernel is likely to stay alive, but the command queue will probably fault again when we resume. This patch fixes the error handling code to use the correct queue index and write back the CMD_SYNC to the faulting entry. Fixes: 48ec83bc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reported-by:
Diwakar Subraveti <Diwakar.Subraveti@arm.com> Signed-off-by:
-
Robin Murphy authored
commit 3ec60043 upstream. Due to the limitations of having to wait until we see a device's DMA restrictions before we know how we want an IOVA domain initialised, there is a window for error if a DMA ops domain is allocated but later freed without ever being used. In that case, init_iova_domain() was never called, so calling put_iova_domain() from iommu_put_dma_cookie() ends up trying to take an uninitialised lock and crashing. Make things robust by skipping the call unless the IOVA domain actually has been initialised, as we probably should have done from the start. Fixes: 0db2e5d1 ("iommu: Implement common IOMMU ops for DMA mapping") Reported-by:
Nate Watterson <nwatters@codeaurora.org> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Mathias Nyman authored
commit 0caf6b33 upstream. In most cases the devices with the speed set to USB_SPEED_SUPER_PLUS are handled like regular SuperSpeed devices. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Robert Deliën authored
commit 6977495c upstream. Ivium Technologies uses the FTDI VID with custom PIDs for their line of electrochemical interfaces and the PalmSens they developed for PalmSens BV. Signed-off-by:
Robert Delien <robert@delien.nl> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
