- 09 Sep, 2005 40 commits
-
-
Dominik Brodowski authored
config_t->Vpp1, Vpp2 and Vcc are never read, so remove them. Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dominik Brodowski authored
client_t and CLIENT_MAGIC are unused, so remove them Signed-off-by:
-
Daniel Ritz authored
extend cb_writel(), exca_writeb(), exca_writel() to do a read[lb]() after the write[lb]() to avoid possible problem with PCI write posting. Seems to fix Bug #5061. Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Daniel Ritz authored
multifunction cards need to have the same irq assigned to both functions. the code tries that but fails because ret is still set to CS_IN_USE which results in the function having the CB irq assigned. yenta_set_socket then just changes the irq routing to use the PCI interrupt but the first functions irq handler is registered on an ISA interrupt. boom. Signed-off-by:
-
Daniel Ritz authored
- thread_done should only be completed when the wait_queue is installed. - all wake up conditions should be checked before schedule() this fixes a hang of rmmod in the sequence modprobe yenta_socket; rmmod yenta_socket as reported by Andreas Steinmetz. w/o this rmmod yenta_socket can hang on wait_for_completion() in pcmcia_unregister_socket() Signed-off-by:
-
Dominik Brodowski authored
Share code between setup-bus.c and yenta_socket.c: use the write-out code of resources to the bridge also in yenta_socket.c, as it provides useful debug output. In addition, it fixes the bug that the CPU-centric resource view might need to be transferred to the PCI-centric view: setup-bus.c does that, while yenta-socket.c did not. Signed-off-by:
-
Ingo Molnar authored
This patch reduces the stack footprint of pcmcia_device_query() from 416 bytes to 36 bytes. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Marcelo Feitoza Parisi authored
Use of the time_after_eq() macro, defined at linux/jiffies.h, which deal with wrapping correctly and are nicer to read. Signed-off-by:
Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Philipp Matthias Hahn authored
Integrate saa7146_i2c adapter into device model: Moves entries from /sys/device/platform to /sys/device/pci*. Signed-off-by:
Philipp Hahn <pmhahn@titan.lahn.de> Signed-off-by:
-
Karl Herz authored
Add PCI-ids of Siemens-DVB-C card with Technotrend manufacturer id. Signed-off-by:
Karl Herz <karl.herz@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Improved remote control support for av7110-based cards: o extended rc5 protocol, firmware >= 0x2620 required o key-up timer slightly adjusted o completely moved remote control code to av7110_ir.c o support for multiple ir receivers o for now, all av7110 cards share the same ir configuration and event device Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Disable COM_IF_LOCK workaround for firmware > 0x261f. Signed-off-by:
-
Johannes Stezenbach authored
Disable superflous firmware handshake. Signed-off-by:
-
Andrew de Quincey authored
Enable frontend on KNC plus cards. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Andrew de Quincey authored
Fixes for CI interface. Signed-off-by:
-
Andrew de Quincey authored
Add support for TT DVB-C CI card. Signed-off-by:
-
thomas schorpp authored
Add support for analog video inputs (CVBS and Y/C) of the analog module for the Siemens DVB-C card. Signed-off-by:
thomas schorpp <t.schorpp@gmx.de> Signed-off-by:
-
Johannes Stezenbach authored
IR RC fixes: - EVIOCSKEYCODE is not supported by this driver, fix potential crash when it is used by not setting rc_input_dev->keycodesize - fix key repeat handling (hopefully) - reduce default poll internal to 50msec (necessary for key repeat handling) Signed-off-by:
-
Manu Abraham authored
Updated Documentation Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Updated documentation Signed-off-by:
-
Manu Abraham authored
Fix BUG in DVB-C frequency setting. Thanks to Peng Cao <caopeng75@gmail.com> Signed-off-by:
-
Manu Abraham authored
Identify board properly: Add functions to retrieve MAC Address, FW details, Card type and Vendor Information. Signed-off-by:
-
Manu Abraham authored
Code Cleanup: o Remove debug noise o Remove debug module parameter debug level is achieved using the verbosity level o Updated to kernel coding style (case labels should not be indented) Signed-off-by:
-
Manu Abraham authored
Code Simplification: CA PMT object is not parsed in the driver anymore. Signed-off-by:
-
Manu Abraham authored
Make the Symbolrate setting card specific. Signed-off-by:
Manu Abraham <manu@kromtek.com> Signed-off-by:
-
Stuart Auchterlonie authored
Fix bug in Nebula DigiTV frontend detection for nxt6000. Signed-off-by:
Stuart Auchterlonie <stuarta@squashedfrog.net> Signed-off-by:
-
David Johnson authored
Add support for Nebula DigiTV PCI cards with the MT352 frontend. Signed-off-by:
David Johnson <dj@david-web.co.uk> Signed-off-by:
-
David Johnson authored
Indentation fixes and remove unnecessary braces. Signed-off-by:
-
Johannes Stezenbach authored
Endianness fix for risc DMA start address setting. (reported by Stefan Haubenthal/Peter Hettkamp) Signed-off-by:
-
Johannes Stezenbach authored
comment out noisy dprintk in dst_get_signal() (why are errors only visible with debug on? this needs to be cleaned up so we can disable debug by default) Signed-off-by:
-
Patrick Boettcher authored
This patch changes two things: 1) a firmware update made by the vendor, which has to be done in Windows for now, changes the DVB-data-pipe from isochronous to bulk: it fixes the data distortions (and thus the video-distortions) in DVB-T mode; there is no backwards compatibility with the old firmware as it didn't work anyway 2) with the help of Steve Toth some reverse-engineered functionality is now named correctly, thank you Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
white space cleanup Signed-off-by:
-
Svante Olofsson authored
Add support for the NXT6000-based digitv-box. Add .get_tune_settings callback for the NXT6000 to have a min_tune_delay of 500ms. Signed-off-by:
Svante Olofsson <svante@agentum.com> Signed-off-by:
-
Patrick Boettcher authored
Change the init call to optionally return the new dvb_usb_device directly. Signed-off-by:
-
Patrick Boettcher authored
Added names for clones of the DVB-T stick. Whitespace cleanups. Signed-off-by:
-
Ye Jianjun (Joey authored
Fix: copy frontend_ops before modifying Signed-off-by:
Ye Jianjun (Joey) <joeyye@trident.com.cn> Signed-off-by:
-
Andreas Oberritter authored
Removed empty module_init/exit calls. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
Add USB IDs of the Kworld Xpert DVB-T USB2.0 (clone of the ADStech box). Thanks to Marcus Hagn for testing. Signed-off-by:
-
Patrick Boettcher authored
Add driver for the TwinhanDTV StarBox and clones. Thanks to Ralph Metzler for his initial work on this box and thanks to Twinhan for their support. Signed-off-by:
-
Mac Michaels authored
This fix has also been applied to lgdt330x. There is an optimization that keeps track of the frequency tuned by the digital decoder. The digital driver does not set the frequency if it has not changed since it was tuned. The analog tuner driver knows nothing about the frequency saved by the digital driver. When the frequency is set using the video4linux code with tvtime, the hardware get changed but the digital driver's state does not get updated. Switch back to the same digital channel and the driver finds no change in frequency so the tuner is not reset to the digital frequency. The work around is to remove the check and always set the tuner to the specified frequency. Signed-off-by:
Mac Michaels <wmichaels1@earthlink.net> Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
-
