- 28 Oct, 2014 6 commits
-
-
Saeed Mahameed authored
Added support for get_module_info/get_module_eeprom ethtool support for cable info reading. Added new cable types enum in include/uapi/linux/ethtool.h for ethtool use. +#define ETH_MODULE_SFF_8636 0x3 +#define ETH_MODULE_SFF_8636_LEN 256 +#define ETH_MODULE_SFF_8436 0x4 +#define ETH_MODULE_SFF_8436_LEN 256 Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
Added new MAD_IFC command to read cable module info with attribute id (0xFF60). Update include/linux/mlx4/device.h with function declaration (mlx4_get_module_info) and the needed defines/enums for future use. Signed-off-by:
-
Simon Horman authored
The original motivation for this change was to allow the helper to be used in files other than actions.c as part of work on an odp select group action. It was as pointed out by Thomas Graf that this helper would be best off living in netlink.h. Furthermore, I think that the generic nature of this helper means it is best off in netlink.h regardless of if it is used more than one .c file or not. Thus, I would like it considered independent of the work on an odp select group action. Cc: Thomas Graf <tgraf@suug.ch> Cc: Pravin Shelar <pshelar@nicira.com> Cc: Andy Zhou <azhou@nicira.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Thomas Graf <tgraf@noironetworks.com> Signed-off-by:
-
Sebastian Hesselbarth authored
Do not add phy include to the board file but platform_data include instead. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
Viet Nga Dao authored
Additional code to m88e1145_config_init function to allow the driver to support SGMII mode. Signed-off-by:
Viet Nga Dao <vndao@altera.com> Signed-off-by:
-
Thomas Graf authored
The internal and netdev vport remain part of openvswitch.ko. Encap vports including vxlan, gre, and geneve can be built as separate modules and are loaded on demand. Modules can be unloaded after use. Datapath ports keep a reference to the vport module during their lifetime. Allows to remove the error prone maintenance of the global list vport_ops_list. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
- 27 Oct, 2014 21 commits
-
-
David S. Miller authored
Varka Bhadram says: ==================== cleanup on resource check This series removes the duplication of sanity check for platform_get_resource() return resource. It will be checked with devm_ioremap_resource() changes since v2: - Merge #1 and #2 patches into single patch - remove the comment changes since v1: - remove NULL dereference on resource_size() ==================== Signed-off-by: -
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
Varka Bhadram <varkab@cdac.in> Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Kyeyoon Park authored
This feature is defined in IEEE Std 802.11-2012, 10.23.13. It allows the AP devices to keep track of the hardware-address-to-IP-address mapping of the mobile devices within the WLAN network. The AP will learn this mapping via observing DHCP, ARP, and NS/NA frames. When a request for such information is made (i.e. ARP request, Neighbor Solicitation), the AP will respond on behalf of the associated mobile device. In the process of doing so, the AP will drop the multicast request frame that was intended to go out to the wireless medium. It was recommended at the LKS workshop to do this implementation in the bridge layer. vxlan.c is already doing something very similar. The DHCP snooping code will be added to the userspace application (hostapd) per the recommendation. This RFC commit is only for IPv4. A similar approach in the bridge layer will be taken for IPv6 as well. Signed-off-by:
Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by:
-
Fabian Frederick authored
Let compiler decide what to do with static void __ipxitf_put() Suggested-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
use %08X instead of %08lX and remove casting. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Fabian Frederick authored
include ipx.h from sysctl_net_ipx.c Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
unsigned char *sha (source) was already in original git version but was never used. Signed-off-by:
-
David S. Miller authored
Frank Blaschka says: ==================== s390: network patches for net-next looks like there was a problem with my previous posting. Hope this time it will work. Sorry for any inconvenience. The patches are mostly cleanups and small enhancements for net-next ==================== Signed-off-by: -
Thomas Richter authored
Since a single integer value is read from the supplied buffer use the kstrto functions instead of sscanf. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Richter authored
Since a single integer value is read from the supplied buffer use the kstrto functions instead of sscanf. Signed-off-by:
-
Thomas Richter authored
Compile the s390 10GB ethernet device driver only when ETHERNET has been defined in the kernel configuration file. Right now the qeth device driver is always built regardless of which network connectivity is active. Signed-off-by:
-
Thomas Richter authored
This patch makes 4 local functions static and removes the prototypes from the header file. Signed-off-by:
-
Thomas Richter authored
This patch fixes trace formatting issues using the QETH_CARD_TEXT_ macro. The total size of each trace entry is 8 bytes. Some of the sprintf formats exceed these 8 bytes (for example using abcd:%d and the converted value needs more than 3 bytes). The solution is to shorten the text prepending the value or use a different format (%x). Signed-off-by:
-
Thomas Richter authored
This patch makes some global functions static and removes the prototypes from the header file. Also function qeth_query_card_info is not exported anymore, there is no external user for it, this function should never have been exported in the first place. Signed-off-by:
-
David Vrabel authored
A full Rx ring only requires 1 MiB of memory. This is not enough memory that it is useful to dynamically scale the number of Rx requests in the ring based on traffic rates, because: a) Even the full 1 MiB is a tiny fraction of a typically modern Linux VM (for example, the AWS micro instance still has 1 GiB of memory). b) Netfront would have used up to 1 MiB already even with moderate data rates (there was no adjustment of target based on memory pressure). c) Small VMs are going to typically have one VCPU and hence only one queue. Keeping the ring full of Rx requests handles bursty traffic better than trying to converge on an optimal number of requests to keep filled. On a 4 core host, an iperf -P 64 -t 60 run from dom0 to a 4 VCPU guest improved from 5.1 Gbit/s to 5.6 Gbit/s. Gains with more bursty traffic are expected to be higher. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
- 25 Oct, 2014 4 commits
-
-
David S. Miller authored
Sowmini Varadhan says: ==================== sunvnet: NAPIfy sunvnet This patchset converts the sunvnet driver to use the NAPI framework. Changes since v4 to Patch1: vnet_event accumulates LDC_EVENT_* bits into rx_event. vnet_event_napi() unrolls send_events() logic to process all rx_event bits. Changes since v5: Patch 1: use net_device.h definition for NAPI_POLL_WEIGHT. Drop sparclinux changes (patch3) per David Miller feedback Patch 1 in the series addresses the packet-receive path- all the vnet_event() processing is moved into NAPI context. This patch is dependant on the sparc-next commit: "sparc64: Add vio_set_intr() to enable/disable Rx interrupts" (sparc commit id ca605b7d) Patch 2 uses RCU to fix race conditions between vnet_port_remove and paths that access/modify port-related state, such as vnet_start_xmit. Patch 3 leverages from the NAPIfied Rx path, dropping superfluous usage of the irqsave/irqrestores on the vio.lock where possible. ==================== Signed-off-by:
-
Sowmini Varadhan authored
After the NAPIfication of sunvnet, we no longer need to synchronize by doing irqsave/restore on vio.lock in the I/O fastpath. NAPI ->poll() is non-reentrant, so all RX processing occurs strictly in a serialized environment. TX reclaim is done in NAPI context, so the netif_tx_lock can be used to serialize critical sections between Tx and Rx paths. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
A vnet_port_remove could be triggered as a result of an ldm-unbind operation by the peer, module unload, or other changes to the inter-vnet-link configuration. When this is concurrent with vnet_start_xmit(), there are several race sequences possible, such as thread 1 thread 2 vnet_start_xmit -> tx_port_find spin_lock_irqsave(&vp->lock..) ret = __tx_port_find(..) spin_lock_irqrestore(&vp->lock..) vio_remove -> .. ->vnet_port_remove spin_lock_irqsave(&vp->lock..) cleanup spin_lock_irqrestore(&vp->lock..) kfree(port) /* attempt to use ret will bomb */ This patch adds RCU locking for port access so that vnet_port_remove will correctly clean up port-related state. Signed-off-by:Dwight Engen <dwight.engen@oracle.com> Acked-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
Move Rx packet procssing to the NAPI poll callback. Disable VIO interrupt and unconditioanlly go into NAPI context from vnet_event. Note that we want to minimize the number of LDC STOP/START messages sent. Specifically, do not send a STOP message if vnet_walk_rx does not read all the available descriptors because of the NAPI budget limitation. Instead, note the end index as part of port state, and resume from this index when the next poll callback is triggered. Signed-off-by:
Raghuram Kothakota <raghuram.kothakota@oracle.com> Acked-by:
-
- 24 Oct, 2014 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-10-23 This series contains updates to i40e and i40evf. Jesse modifies the i40e driver to only notify the firmware on link up/down and qualified module events. Also simplified the job of managing link state by using the admin queue receive event for link events as a signal to tell the driver to update link state. Jeff (me) cleans up the inconsistent use of tabs for indentation in the admin queue command header file. Neerav converts the use of udelay() to usleep_range(). Anjali fixes a bug where receive would stop after some stress by adding a sleep and restart as well as moving the setting of flow control because it should be done at a PF level and not a VSI level. Mitch adds code to handle link events when updating the PF switch, which allows link information to be properly provided to VFS in all cases. Catherine adds driver support for 10GBaseT and bumps driver version. ==================== Signed-off-by: -
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
See Documentation/CodingStyle Chapter 6 Signed-off-by:
-
David S. Miller authored
Sebastian Hesselbarth says: ==================== Marvell PXA168 libphy handling and Berlin Ethernet This patch series deals with a removing a IP feature that can be found on all currently supported Marvell Ethernet IP (pxa168_eth, mv643xx_eth, mvneta). The MAC IP allows to automatically perform PHY auto-negotiation without software interaction. However, this feature (a) fundamentally clashes with the way libphy works and (b) is unable to deal with quirky PHYs that require special treatment. In this series, pxa168_eth driver is rewritten to completely disable that feature and properly deal with libphy provided PHYs. As usual, a branch on top of v3.18-rc1 can be found at git://git.infradead.org/users/hesselba/linux-berlin.git devel/bg2-bg2cd-eth-v2 Patches 1-5 should go through David's net tree, I'll pick up the DT patches 6-9. There have been some changes, compared to the RFT - added phy-connection-type property to BG2Q PHY DT node - bail out from pxa168_eth_adjust_link when there is no change in PHY parameters. Also, add a call to phy_print_status. compared to v1 - move phy-connection-type to ethernet node instead of PHY node Patch 1 adds support for Marvell 88E3016 FastEthernet PHY that is also integrated in Marvell Berlin BG2/BG2CD SoCs. Patch 2 allows to pass phy_interface_t on pxa168_eth platform_data that is only used by mach-mmp/gplug. From the board setup, I guessed gplug's PHY is connected via RMII. The patch still isn't even compile tested. Patches 3-5 prepare proper libphy handling and finally remove all in-driver PHY mangling related to the feature explained above. Patches 6-9 add corresponding ethernet DT nodes to BG2, BG2CD, add a phy-connection-type property to BG2Q and enable ethernet on BG2-based Sony NSZ-GS7. I have tested all this on GS7 successfully with ip=dhcp on 100M FD. ==================== Signed-off-by:
-
Sebastian Hesselbarth authored
With properly using libphy PHYs now, remove the in-driver PHY mangling. Tested-by:
Antoine Ténart <antoine.tenart@free-electrons.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Sebastian Hesselbarth authored
Marvell Ethernet IP supports PHY negotiation driven by HW. This fundamentally clashes with libphy (software) driven negotiation and also cannot cope with quirky PHYs. Therefore, always disable any HW negotiation features and properly use libphy's phy_device. Tested-by:
-
Sebastian Hesselbarth authored
Current libphy handling in pxa168_eth lacks proper phy_connect. Prepare to fix this by first moving phy properties from platform_data to private driver data. Tested-by:
-
Sebastian Hesselbarth authored
The PXA168 Ethernet IP support MII and RMII connection to its PHY. Currently, pxa168 platform_data does not provide a way to pass that and there is one user of pxa168 platform_data (mach-mmp/gplug). Given the pinctrl settings of gplug it uses RMII, so add and pass a corresponding phy_interface_t. Tested-by:
-
Sebastian Hesselbarth authored
Marvell 88E3016 is a FastEthernet PHY that also can be found in Marvell Berlin SoCs as integrated PHY. Tested-by:
-
