- 06 Mar, 2004 5 commits
-
-
bk://kernel.bkbits.net/wesolows/sparc32-2.6David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
Roman Zippel authored
This fixes a problem with creating symlinks, a few fields in the inode/dentry were left uninitialized.
-
Keith M. Wesolowski authored
-
bk://linux-acpi.bkbits.net/linux-acpi-release-2.6.4Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.5/linux
-
- 07 Mar, 2004 3 commits
-
-
Nathan Scott authored
-
Nathan Scott authored
SGI Modid: xfs-linux:xfs-kern:167948a
-
Eric Sandeen authored
SGI Modid: xfs-linux:xfs-kern:167980a
-
- 05 Mar, 2004 22 commits
-
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
Andrew Morton authored
-
Benjamin Herrenschmidt authored
The code initializing the "high" BATs on CPUs like the 750FX got broken when copied over from 2.4. This cause random problems with machines using those CPUs (iBook 2s typically).
-
bk://kernel.bkbits.net/davem/net-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.5/linux
-
Dave Jones authored
Sparse noticed a bunch of mismatched prototypes in the new syscalls.h file when compiling net/socket.c Whilst most of them are just missing __user tags, the last argument of sys_socketpair was completely different.
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/net-2.6
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.5/linux
-
David S. Miller authored
-
bk://bk.arm.linux.org.uk/linux-2.6-serialLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.5/linux
-
Russell King authored
WRT 2.4, Ed Vance put this fix into 2.4: According to the data sheet, the OX16PCI952 has port 0 in BAR0 and port 1 in BAR1. (unlike the OX16C954, BTW) The 921600 base baud value is your oscillator rate divided by the default oversample rate, 16. Since 2.6 PCI IDs have been updated to use the real device ID for this part, we really should include this fix as well.
-
Russell King authored
If a serial port is hung up using vhangup() with HUPCL cleared (so DTR isn't dropped), and then re-opened, we don't want to drop the DTR line. This occurs during the login process, and dropping DTR would cause a modem to hang up.
-
Russell King authored
-
Russell King authored
-
Harald Welte authored
I didn't yet use one of my AFAVLAB boards with 2.6.x until now. The upper 4 ports are not detected at all. I suppose the bug was introduced while porting the driver from 2.4.x. Please consider applying the following patch. It also adds support for a new 8 port board called P030.
-
Bjorn Helgaas authored
The current serial console code only works for ports that are either defined in SERIAL_PORT_DFNS (and set up by serial8250_isa_init_ports()) or registered by early_serial_setup(). On ia64, SERIAL_PORT_DFNS is empty because we discover everything via ACPI and PCI. And we only use early_serial_setup() for one port described by the HCDP firmware table. This patch against 2.6.4-rc1 makes it work for any valid port. If we don't know about the port early, we just return -ENODEV from the setup() function, which leaves the serial console disabled. After the driver has found all the ports, we try to register the serial console again if it hasn't been enabled already. Keith Owens noticed that the first version of this patch broke some serial console setups because many early serial ports are registered with "type == PORT_UNKNOWN". So this version tests "port->ops" instead, and Keith has confirmed that this works for him.
-
David Stevens authored
-
bk://kernel.bkbits.net/wesolows/sparc32-2.6David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
Igmar Palsenberg authored
-
http://linux-mh.bkbits.net/bluetooth-2.6David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
Marcel Holtmann authored
Only allocate the RFCOMM TTY devices when they are really in use. This prevents the system from calling hotplug and udev 256 times to create or remove every device node. In fact this makes the loading and unloading of the RFCOMM module much faster.
-
Marcel Holtmann authored
This patch adds a notification callback to the hci_dev structure which is used by the HCI core to tell the driver about connection creation and clearing. It also notifies about changed voice setting.
-
Marcel Holtmann authored
This patch introduces a quirk flag for sending the HCI_Reset command. In general the HCI_Reset is not needed, but some Broadcom dongles uses this reset command to switch from HID to HCI mode. And it is not safe to send the HCI_Reset to every Bluetooth device, because the CSR firmware prior HCI 12.x will reset the host transport and this is wrong according to the Bluetooth specification.
-
- 04 Mar, 2004 10 commits
-
-
Neil Brown authored
nfsd uses several different mechanisms for identifying the filesystem from the filehandle. This patch: Marks type 2 as deprecated - it wastes space, and space in the filehandle is not unlimited Adds type 3 which handles new, large device number in 32bits of space Tidies up the code for determining which type to use in a newly created filehandle - the addition of type 2 broke this code.
-
Brian Gerst authored
This fixes two errors in fixup_exception() for PnP BIOS faults: - Check for the correct segments used for the BIOS - Fix asm constraints so that EIP and ESP are properly reloaded
-
Keith M. Wesolowski authored
-
Keith M. Wesolowski authored
-
Keith M. Wesolowski authored
into foobazco.org:/sources/2.5-sparc-todave
-
Keith M. Wesolowski authored
into foobazco.org:/sources/2.5-sparc-todave
-
Andrew Morton authored
Free the request queues on the rd_init() error recovery path.
-
bk://gkernel.bkbits.net/misc-2.5Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.5/linux
-
Jeff Garzik authored
Noticed by me, fixed by Jens.
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.5/linux
-