- 10 Oct, 2008 33 commits
-
-
Matthew Ranostay authored
Add support for powering down VREF on standard headphone insertion, also powers up the VREF on a headset insertion. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Set the third microphone to a default config of a 'Line In' to be added the Input Source Mux's. Signed-off-by:
-
Mark Brown authored
Since there are now multiple OpenMoko platforms it is more important to check that the machine driver is running on the correct system. This was orgininally generated as part of the initial GTA02 machine port. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Takashi Iwai authored
Ingo reported Oops at probing mtpav driver. It's a race between the irq handler and the rawmidi instance registration. This patch fixes the order of registration to avoid the race. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Pedro Lopez-Cabanillas authored
The MIDI interfaces have to be detected dynamically for Edirol devices ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by my other patch in uaxx-quirk. Signed-off-by:
Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Added a note on the dependency of old RTC stuff, which is exclusive with the new RTC class drivers. http://bugme.linux-foundation.org/show_bug.cgi?id=11430Signed-off-by: -
Richard Zhao authored
Function dapm_mux_update_power needs enum index mux and register mask value val as parameters, but it only has a parameter val, and uses it as both val and mux. snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here, e->texts[val] but val should be enum index mux here. This patch adds a new param mux to fix it. Signed-off-by:
Richard Zhao <linuxzsc@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Increase the card components[] (and thus snd_card_info.components[], too) array size from 80 to 128 chars so that more strings can be stored. The 80 chars aren't enough for more than 2 HD-audio codecs, and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP 2230s. The control protocol number is increased to 2.0.6 as well, in case it matters. Reported-by:
Wu Fengguang <wfg@linux.intel.com> Acked-by:
-
Mark Brown authored
Mic PGA Switch should be inverted in the WM8510 driver but isn't. Reported-by: ext-jukka.hynninen@vaisala.com Signed-off-by:
-
Wu Fengguang authored
fix a typo in comment for is_in_nid_list(). Signed-off-by:
-
Wu Fengguang authored
fix a typo in comment for process_unsol_events(). Signed-off-by: Wu Fengguang<wfg@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
The PCI SSID for ASROCK mobo in commit ac56445dd6a38a36c2fa91989f5f6220a9bdf97c is wrong. This patch fixes to the correct one, 1849:3662. Signed-off-by:
-
Pedro Lopez-Cabanillas authored
Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by:
-
Takashi Iwai authored
The endpoints should be released immediately at disconnection rather than the delayed release. This could be a reason of Oops at USB-audio device disconnection being used. Signed-off-by:
-
Clive Messer authored
ALC889A hardware (id 0x10ec0885 rev 0x100101) to use patch_alc883 Signed-off-by:
Clive Messer <clive@vacuumtube.org.uk> Signed-off-by:
-
Vedran Miletic authored
I recently got a chance to play with two boards with ALC662 rev1: * BIOSTAR TA780G M2+ * ASROCK K10N78FullHD-hSLI R3.0 Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able to figure that out from BIOS, we need to specify that manually. Signed-off-by:
Vedran Miletic <rivanvx@gmail.com> Signed-off-by:
-
Vladimir Barinov authored
Signed-off-by:
-
Vedran Miletic authored
This patch adds PCI IDs for: * TerraTec DMX XFire 1024 * Hercules Gamesurround Fortissimo II * Hercules Gamesurround Fortissimo III 7.1 All those cards were supported as generic CS46xx device, so they will work as before. I'm pretty sure that first two cards work, as they have same hardware design as reference card. Not sure about Fortissimo III, but this won't break it if it worked. Tested on TerraTec DMX XFire 1024. Signed-off-by:
-
Matthew Ranostay authored
Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on supporting codecs. Signed-off-by:
-
Peter Korsgaard authored
The AppleTV needs the same handling as the 24" iMac. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
Use 3stack-6ch-dig ALC662 model for Foxconn 45CMX/45GMX/45CMX-K motherboard. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
Use 3stack-6ch-dig ALC662 model for Gigabyte 945GCM-S2L motherboard. Signed-off-by:
-
Julien Brunel authored
The test (ssc != NULL) can only be reached if the call to the function ssc_request, the result of which ssc is assigned, succeeds. Moreover, two statements assign NULL to ssc just before a return, which is useless since it is a local variable. So, we suggest to delete the test and the two assignments. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @bad_null_test@ expression x,E; @@ x = ssc_request(...) ... when != x = E * x != NULL // </smpl> Signed-off-by:
Julien Brunel <brunel@diku.dk> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
-
Matthew Ranostay authored
Added HP laptop SND_PCI_QUIRK for STAC_HP_M4. Signed-off-by:
-
Matthew Ranostay authored
Add support for S/PDIF IN on reference boards quirks. Also disable the IEC958 capture switch on boards with GPIO0 enabled. Signed-off-by:
-
Eran Tromer authored
Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by:
Eran Tromer <eran@tromer.org> Signed-off-by:
-
Wei Ni authored
When read RIRB buffer immediately after RIRB interrupt received, sometimes the data will be "0x0". If we wait for some time, the data in buffer will be correct. This issue only occurred with AMD Phenom cpu. So we set this "needs_damn_long_delay" flag. Signed-off-by:
Wei Ni <wni@nvidia.com> Signed-off-by:
-
Wei Ni authored
Add NVIDIA HDMI HD-audio codec support in snd-hda-intel driver, include NVIDIA MCP78/7A HDMI. Signed-off-by:
-
Takashi Iwai authored
The recent slave_dig_out addition has some rooms to clean up. Also it doesn't call snd_hda_cleanup_stream() properly for slaves at closing. The patch fixes both issues. Signed-off-by:
-
Matthew Ranostay authored
Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch control. Beforehand this was basically a mute switch for the S/PDIF outs as well. Signed-off-by:
-
Takashi Iwai authored
Fujitsu Lifebook P7010 requires ac97_quirk=hp_only. http://bugzilla.kernel.org/show_bug.cgi?id=9100Signed-off-by: -
Takashi Iwai authored
We have some arithmetic operations against snd_pcm_hw_param_t, thus bitwise isn't correct for it. Better to remove the flag to shut up sparse warnings. Signed-off-by:
-
Matthew Ranostay authored
Patch allows the last DAC in the dac_nids for the hp_nid if there is an available one this isn't in use by a line_out entry or if hp_nid isn't already defined. This solves the issues with the 'Headphone Playback' mixer controls on the 92hd73xxx branch and possibly others. Signed-off-by:
-
- 24 Sep, 2008 1 commit
-
-
Clemens Ladisch authored
After sending a reset command to the UART, wait some time for the ACK to be generated (and to be read and dropped by the interrupt handler) before sending the next command. Signed-off-by:Clemens Ladisch <clemens@ladisch.de>
-
- 23 Sep, 2008 6 commits
-
-
Jean Delvare authored
Convert the tlv320aic3x codec driver to the new (standard) device driver binding model. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Vladimir Barinov <vbarinov@ru.mvista.com> Tested-by:
Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by:
-
Herton Ronaldo Krzesinski authored
In previous change "[ALSA] hda-codec - Fix ALC662 DAC mixer mutes", I missed to fix the mixer mute switches also for the auto config model of ALC662. Now mute for mixer items "Front", "Surround", "Center" and "LFE" when available will work too with "auto" model. Signed-off-by:
-
David Woodhouse authored
This seems to work if I tell it that it's a mbp3. Not sure if there are actually any differences. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Matthew Ranostay authored
Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels pointer for custom SPDIF mux labels for non-standard codec connections. Signed-off-by:
-
Mark Brown authored
Implement SPI support for WM8750, cut'n'pasting from the support for WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format is the same for both codecs. Also fix a cut'n'pasted comment in the I2C side of the driver (which was clearly written in the same way) while we're at it. Signed-off-by:
-
Mark Brown authored
The stereo ADC in the WM9713 can be used to produce data for both the standard AC97 interface and the additional voice PCM interface. Support use on both by defining virtual ADCs tied to each accepting the output from the actual ADCs. Reported-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
