- 22 Feb, 2011 7 commits
-
-
Tobias Klauser authored
This will make it easier to get the driver to support device tree. The old platform data method is still supported though. Also change the driver to use only one platform device per port. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tobias Klauser authored
This is not even used in nios2 arch code anymore. Signed-off-by:
-
Tobias Klauser authored
This fixes a sparse warning. Signed-off-by:
-
Feng Tang authored
The three identical uart ports can work either in DMA or PIO mode. Adding such a module parameter "hsu_dma_enable" will enable user to chose working modes for each port. If the mfd driver is built in kernel, adding a "mfd.hsu_dma_enable=x" in kernel command line has the same effect. Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
-
Feng Tang authored
In A0 stepping, TX half-empty interrupt is not working, so have to use the full-empty interrupts whose performance will be 15% lower. Now re-enable the half-empty interrrupt after it is enabled in silicon. Signed-off-by:
-
Luck, Tony authored
Alan missed the ia64 simulator serial driver (because it was hidden in arch/... rather than located under drivers/... where one might expect to find a driver). Drop the "file *" argument from rs_ioctl() in arch/ia64/hp/sim/simserial.c Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>, Signed-off-by:
-
Greg Kroah-Hartman authored
The Kconfig options for the drivers/tty/ files still were hanging around in the "big" drivers/char/Kconfig file, so move them to the proper location under drivers/tty and drivers/tty/hvc/ Signed-off-by:
-
- 17 Feb, 2011 27 commits
-
-
Kay Sievers authored
This is useful for system management software so that it can kick off things like gettys and everything that's started from a tty, before we reuse it from/for something else or shut it down. Without this ioctl it would have to temporarily become the owner of the tty, then call vhangup() and then give it up again. Cc: Lennart Poettering <lennart@poettering.net> Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Alan Cox authored
Was this exploitable - who knows, but it was certainly totally broken Signed-of-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
This basically encapsulates the small bit of locking knowledge needed. While we are at it make sure we blow up on any more abusers and unsafe misuses of ioctl for this kind of stuff. We change the function to return an argument as at some point it needs to honour the POSIX 'I asked for changes but got none of them' error reporting corner case. Signed-off-by:
-
Greg Kroah-Hartman authored
This was caused by the previous patch to remove the file pointer from the tty ioctl handler. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Alan Cox authored
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by:
-
Alan Cox authored
We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by:
-
Alan Cox authored
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by:
-
Alan Cox authored
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
-
Tobias Klauser authored
Use the regshift member of struct uart_port to store the address stride from platform data. This way we can save one dereference per call of altera_uart_readl and altera_uart_writel. This also allows us to use the driver without platform data, which is needed for device tree support in the Nios2 port. Acked-by:
Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by:
-
Tobias Klauser authored
Commit 6b5756f1 introduced the possibility for pdev->id being -1 but the change was not done equally in altera_uart_remove. This patch fixes this. Acked-by:
-
Jiri Olsa authored
using VT_SETACTIVATE ioctl for console switch did not work, since it put wrong param to the set_console function. Also ioctl returned misleading error, because of the missing break statement. I wonder anyone has ever used this one :). Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
-
Viktar Palstsiuk authored
Enables PPS support in atmel serial driver to make PPS API working. Signed-off-by:
Viktar Palstsiuk <viktar.palstsiuk@promwad.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
-
Niranjana Vishwanathapura authored
msm_smd_tty driver provides tty device interface to 'DS' and 'GPSNMEA' streaming SMD ports. Cc: Brian Swetland <swetland@google.com> Signed-off-by:
Niranjana Vishwanathapura <nvishwan@codeaurora.org> Acked-by:
-
Yin Kangkai authored
In 8250.c original ns16550 autoconfig code, we change the divisor latch when we goto to high speed mode, we're assuming the previous speed is legacy. This some times is not true. For example in a system with both CONFIG_SERIAL_8250 and CONFIG_SERIAL_8250_PNP set, in this case, the code (autoconfig) will be called twice, one in serial8250_init/probe() and the other is from serial_pnp_probe. When serial_pnp_probe calls the autoconfig for NS16550A, it's already in high speed mode, change the divisor latch (quot << 3) in this case will make the UART console garbled. CC: Greg Kroah-Hartman <greg@kroah.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-kernel@vger.kernel.org CC: stable@kernel.org Signed-off-by:
Yin Kangkai <kangkai.yin@linux.intel.com> Signed-off-by:
-
Yin Kangkai authored
For any reason if the NS16550A was not work in high speed mode (e.g. we hold NS16550A from going to high speed mode in autoconfig_16550a()), now we are resume from suspend, we should also set the uartclk to the correct value. Otherwise it is still the old 1843200 and that will bring issues. CC: Greg Kroah-Hartman <greg@kroah.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-kernel@vger.kernel.org CC: stable@kernel.org Signed-off-by:
-
Russ Gorby authored
renamed spi_driver variable to not be h/w specific set driver name to use DRVNAME define removed commented-out define Signed-off-by:
Russ Gorby <russ.gorby@intel.com> Signed-off-by:
-
Russ Gorby authored
The probe routine should call spi_setup() to configure the SPI bus so it can properly communicate with the device. E.g. the device operates in SPI mode 1. Called spi_setup to configure SPI mode, max_speed_hz, and bpw Signed-off-by:
-
Russ Gorby authored
Platforms containing the 6260 can run up to 25Mhz. For these platforms set max_speed_hz to 25Mhz. Signed-off-by:
-
Russ Gorby authored
driver should support 32bit SPI transfers. The boolean variable only allowed 8/16. Changed to support 8/16/32 for future enabling of 32 bpw. Signed-off-by:
-
Russ Gorby authored
This driver is a SPI protocol driver and has no DMA ops associated with the device so the call will fail. Furthermore, the DMA allocation made here will be used by the SPI controller driver (parent dev) so it makes sense to pass that device instead. Signed-off-by:
-
Russ Gorby authored
The port ops must be set AFTER calling port init as that function zeroes the structure Signed-off-by:
-
Jiri Olsa authored
seems there's no longer need for using con_buf/conf_buf_mtx as vcs_read/vcs_write buffer for user's data. The do_con_write function, that was the other user of this, is currently using its own kmalloc-ed buffer. Not sure when this got changed, as I was able to find this code in 2.6.9, but it's already gone as far as current git history goes - 2.6.12-rc2. AFAICS there's a behaviour change with the current change. The lseek is not completely mutually exclusive with the vcs_read/vcs_write - the file->f_pos might get updated via lseek callback during the vcs_read/vcs_write processing. I tried to find out if the prefered behaviour is to keep this in sync within read/write/lseek functions, but I did not find any pattern on different places. I guess if user end up calling write/lseek from different threads she should know what she's doing. If needed we could use dedicated fd mutex/buffer. Signed-off-by:
-
Jiri Olsa authored
there's a race between vcs's lseek handler and VC release. The lseek handler does not hold console_lock and touches VC's size info. If during this the VC got released, there's an access violation. Following program triggers the issue for me: [SNIP] #define _BSD_SOURCE #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <sys/ioctl.h> #include <linux/vt.h> #include <unistd.h> #include <errno.h> static int run_seek(void) { while(1) { int fd; fd = open("./vcs30", O_RDWR); while(lseek(fd, 0, 0) != -1); close(fd); } } static int open_ioctl_tty(void) { return open("/dev/tty1", O_RDWR); } static int do_ioctl(int fd, int req, int i) { return ioctl(fd, req, i); } #define INIT(i) do_ioctl(ioctl_fd, VT_ACTIVATE, i) #define SHUT(i) do_ioctl(ioctl_fd, VT_DISALLOCATE, i) int main(int argc, char **argv) { int ioctl_fd = open_ioctl_tty(); if (ioctl < 0) { perror("open tty1 failed\n"); return -1; } if ((-1 == mknod("vcs30", S_IFCHR|0666, makedev(7, 30))) && (errno != EEXIST)) { printf("errno %d\n", errno); perror("failed to create vcs30"); return -1; } do_ioctl(ioctl_fd, VT_LOCKSWITCH, 0); if (!fork()) run_seek(); while(1) { INIT(30); SHUT(30); } return 0; } [SNIP] Signed-off-by: -
Mandeep Singh Baines authored
printk()s without a priority level default to KERN_WARNING. To reduce noise at KERN_WARNING, this patch set the priority level appriopriately for unleveled printks()s. This should be useful to folks that look at dmesg warnings closely. Signed-off-by:
Mandeep Singh Baines <msb@chromium.org> Signed-off-by:
-
Mike Frysinger authored
This converts the existing bfin_jtag_comm TTY driver to the HVC layer so that the common HVC code can worry about all of the TTY/polling crap and leave the Blackfin code to worry about the Blackfin bits. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Arthur Taylor authored
virtual console: add keyboard mode OFF Add a new mode for the virtual console keyboard OFF in which all input other than shift keys is ignored. Prevents vt input buffers from overflowing when a program opens but doesn't read from a tty, like X11 using evdev for input. Signed-off-by:
Arthur Taylor <art@ified.ca> Signed-off-by:
-
- 04 Feb, 2011 3 commits
-
-
Stephen Boyd authored
The inline assembly differences for v6 vs. v7 in the hvc_dcc driver are purely optimizations. On a v7 processor, an mrc with the pc sets the condition codes to the 28-31 bits of the register being read. It just so happens that the TX/RX full bits the DCC driver is testing for are high enough in the register to be put into the condition codes. On a v6 processor, this "feature" isn't implemented and thus we have to do the usual read, mask, test operations to check for TX/RX full. Since we already test the RX/TX full bits before calling __dcc_getchar() and __dcc_putchar() we don't actually need to do anything special for v7 over v6. The only difference is in hvc_dcc_get_chars(). We would test RX full, poll RX full, and then read a character from the buffer, whereas now we will test RX full, read a character from the buffer, and then test RX full again for the second iteration of the loop. It doesn't seem possible for the buffer to go from full to empty between testing the RX full and reading a character. Therefore, replace the v7 versions with the v6 versions and everything works the same. Acked-by:
Tony Lindgren <tony@atomide.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Daniel Walker <dwalker@codeaurora.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
Casting and anding with 0xff is unnecessary in hvc_dcc_put_chars() since buf is already a char[]. __dcc_get_char() can't return an int less than 0 since it only returns a char. Simplify the if statement in hvc_dcc_get_chars() to take this into account. Cc: Daniel Walker <dwalker@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
Without marking the asm __dcc_getstatus() volatile my compiler decides it can cache the value of __ret in a register and then check the value of it continually in hvc_dcc_put_chars() (I had to replace get_wait/put_wait with 1 and fixup the branch otherwise my disassembler barfed on __dcc_(get|put)char). 00000000 <hvc_dcc_put_chars>: 0: ee103e11 mrc 14, 0, r3, cr0, cr1, {0} 4: e3a0c000 mov ip, #0 ; 0x0 8: e2033202 and r3, r3, #536870912 ; 0x20000000 c: ea000006 b 2c <hvc_dcc_put_chars+0x2c> 10: e3530000 cmp r3, #0 ; 0x0 14: 1afffffd bne 10 <hvc_dcc_put_chars+0x10> 18: e7d1000c ldrb r0, [r1, ip] 1c: ee10fe11 mrc 14, 0, pc, cr0, cr1, {0} 20: 2afffffd bcs 1c <hvc_dcc_put_chars+0x1c> 24: ee000e15 mcr 14, 0, r0, cr0, cr5, {0} 28: e28cc001 add ip, ip, #1 ; 0x1 2c: e15c0002 cmp ip, r2 30: bafffff6 blt 10 <hvc_dcc_put_chars+0x10> 34: e1a00002 mov r0, r2 38: e12fff1e bx lr As you can see, the value of the mrc is checked against DCC_STATUS_TX (bit 29) and then stored in r3 for later use. Marking the asm volatile produces the following: 00000000 <hvc_dcc_put_chars>: 0: e3a03000 mov r3, #0 ; 0x0 4: ea000007 b 28 <hvc_dcc_put_chars+0x28> 8: ee100e11 mrc 14, 0, r0, cr0, cr1, {0} c: e3100202 tst r0, #536870912 ; 0x20000000 10: 1afffffc bne 8 <hvc_dcc_put_chars+0x8> 14: e7d10003 ldrb r0, [r1, r3] 18: ee10fe11 mrc 14, 0, pc, cr0, cr1, {0} 1c: 2afffffd bcs 18 <hvc_dcc_put_chars+0x18> 20: ee000e15 mcr 14, 0, r0, cr0, cr5, {0} 24: e2833001 add r3, r3, #1 ; 0x1 28: e1530002 cmp r3, r2 2c: bafffff5 blt 8 <hvc_dcc_put_chars+0x8> 30: e1a00002 mov r0, r2 34: e12fff1e bx lr which looks better and actually works. Mark all the inline assembly in this file as volatile since we don't want the compiler to optimize away these statements or move them around in any way. Acked-by:
-
- 03 Feb, 2011 3 commits
-
-
Tomoya MORINAGA authored
PCH_DMA is not always enabled when a user uses PCH_UART. Since overhead of DMA is not small, in case of low frequent communication, without DMA is better. Thus, "select PCH_DMA" and DMADEVICES are unnecessary Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
-
Tomoya MORINAGA authored
Support ML7213 device of OKI SEMICONDUCTOR. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by:
-
Tejun Heo authored
m68k_serial->tqueue_hangup is unused. Remove it. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
