- 04 Aug, 2020 40 commits
-
-
Alex Deucher authored
It's related to the memory manager so move it there. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
It's more related to memory management than memory controller. Reviewed-by:
-
Alex Deucher authored
I suspect the only reason this was set was to avoid touching the display related registers on arcturus. Someone should double check this on arcturus with S3. Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Alex Deucher authored
We never use them. Reviewed-by:
-
Alex Deucher authored
The new helper centralizes the logic in one place. Reviewed-by:
-
Alex Deucher authored
The new helper centralizes the logic in one place. Reviewed-by:
-
Alex Deucher authored
The new helper centralizes the logic in one place. Reviewed-by:
-
Alex Deucher authored
The new helper centralizes the logic in one place. Reviewed-by:
-
Alex Deucher authored
The new helper centralizes the logic in one place. Reviewed-by:
-
Alex Deucher authored
This adds a new gmc callback to get the size reserved by the pre-OS console and provides a helper function for use by gmc IP drivers. Reviewed-by:
-
Alex Deucher authored
This will allow us to split the allocation for systems where we have to keep the stolen memory around to avoid S3 issues. This way we don't waste as much memory and still avoid any screen artifacts during the bios to driver transition. Reviewed-by:
-
Alex Deucher authored
Rather than leaving this as a gmc v9 specific hack. Reviewed-by:
-
Alex Deucher authored
Since that is where we store the other data related to the stolen vga memory. Reviewed-by:
-
Alex Deucher authored
Rather than open coding it everywhere. Reviewed-by:
-
Alex Deucher authored
Should be functionally the same since nothing else is allocated at that point, but let's be exact. Reviewed-by:
-
Alex Deucher authored
Just return early to match other bo_create functions. v2: check if the bo_ptr is NULL rather than checking the size. Reviewed-by:
-
Alex Deucher authored
The i2c init/fini functions just register the i2c adapter. There is no need to call them during hw init/fini. They only need to be called once per driver init/fini. The previous behavior broke runtime pm because we unregistered the i2c adapter during suspend. Tested-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Anthony Koo authored
| [Header Changes] | - Reworked the FW versioning to include hotfix | and test bits Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Alvin Lee authored
[Why] When changing pixel formats for HDR (e.g. ARGB -> FP16) there are configurations that change from 2 pipes to 1 pipe. In these cases, it seems that disconnecting MPCC and doing a surface update at the same time(after unlocking) causes some registers to be updated slightly faster than others after unlocking (e.g. if the pixel format is updated to FP16 before the new surface address is programmed, we get corruption on the screen because the pixel formats aren't matching). We separate disconnecting MPCC from the rest of the pipe programming sequence to prevent this. [How] Move MPCC disconnect into separate operation than the rest of the pipe programming. Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Victor Lu authored
[why] There's currently no method to enable multi-stream synchronization from userspace and we don't check the VSDB bits to know whether or not specific displays should have the feature enable. [how] Add a debugfs entry that controls a new DM debug option, "force_timing_sync". This debug option will set on any newly created stream following the change to the debug option. Expose a new interface from DC that performs the timing sync and a helper to the "force_timing_sync" debugfs that iterates over the current streams and modifies the current synchornization state and grouping. Example usage to force a resync (from an X based desktop): echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_force_timing_sync xset dpms force off && xset dpms force on Signed-off-by:
Victor Lu <victorchengchi.lu@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by:
-
Igor Kravchenko authored
[why] Display goes blank after driver installation. Aux tuning parameters must be used for 2.x only. Wrong dc_golden_table offset was used. [How] Implement a new enc3_hw_init function without VBIOS constants usage to be called for 3.x Calculate dc_golden_table offset using sum of base dce_info offset and golden table offset Signed-off-by:
Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by:
-
George Shen authored
[Why] During SetPathMode and UpdatePlanes, the plane state can be null. We default to linear swizzle mode when plane state is null. This resulted in bandwidth validation failing when trying to set 8K60 mode (which previously passed validation during rebuild timing list). [How] Change the default swizzle mode from linear to 4kb_s and update pitch accordingly. Signed-off-by:
George Shen <george.shen@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
JinZe.Xu authored
[How] Use dc_is_hdmi_signal to determine signal type. Signed-off-by:
JinZe.Xu <JinZe.Xu@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Aric Cyr authored
[Why] Sink OUI supported cap is not set so driver skips programming it. [How] Revert the change the skips OUI programming if the cap is not set Signed-off-by:
-
Eryk Brol authored
[why] Some of the DSC debugfs read enteries are missing comments explaining how to use and how to comprehend the results. Signed-off-by:
Eryk Brol <eryk.brol@amd.com> Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
-
Harry Wentland authored
[Why&How] use correct logger context Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
-
Eryk Brol authored
[Why] We need to be able to specify bits per pixel for DSC on any connector. [How] Overwrite computed DSC target rate in dsc_cfg, with requested value. Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector. Signed-off-by:
-
Dmytro Laktyushkin authored
Signed-off-by:
Eric Bernstein <Eric.Bernstein@amd.com> Acked-by:
-
Igor Kravchenko authored
[Why] For ver.4.4 and higher VBIOS contains default setting table. {How] Read Golden Settings Table from VBIOS, apply Aux tuning parameters. Signed-off-by: -
Eric Bernstein authored
Signed-off-by:
Chris Park <Chris.Park@amd.com> Acked-by:
-
Eric Bernstein authored
Signed-off-by:
-
Eryk Brol authored
[Why] We need to be able to specify slice height for any connector's DSC [How] Overwrite computed parameters in dsc_cfg, with the value needed/ Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector. Signed-off-by:
-
John Clements authored
updated RAS EEPROM init/threshold sequences to check for device support Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
John Clements authored
enabled GECC error injection and query support Reviewed-by:
-
Monk Liu authored
what: the MQD's save and restore of KCQ (kernel compute queue) cost lots of clocks during world switch which impacts a lot to multi-VF performance how: introduce a paramter to control the number of KCQ to avoid performance drop if there is no kernel compute queue needed notes: this paramter only affects gfx 8/9/10 v2: refine namings v3: choose queues for each ring to that try best to cross pipes evenly. v4: fix indentation some cleanupsin the gfx_compute_queue_acquire() v5: further fix on indentations more cleanupsin gfx_compute_queue_acquire() TODO: in the future we will let hypervisor driver to set this paramter automatically thus no need for user to configure it through modprobe in virtual machine Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
-
Guchun Chen authored
During driver's probe, when it hits bad gpu tag in eeprom i2c init calling(the tag was set when reported bad page reaches bad page threshold in last driver's working loop), there are some strategys to deal with the cases: 1. when the module parameter amdgpu_bad_page_threshold = 0, that means page retirement feature is disabled, so just resetting the eeprom is fine. 2. When amdgpu_bad_page_threshold is not 0, and moreover, user sets one bigger valid data in order to make current boot up succeeds, correct eeprom header tag and do not break booting. 3. For other cases, driver's probe will be broken. v2: Just update eeprom header tag instead of resetting the whole table header when user sets one bigger threshold data. v3: Use dev_info/dev_err to print PCI device information, which helps in mGPU case. Signed-off-by:Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Guchun Chen authored
When amdgpu_bad_page_threshold = 0, bad page reservation stuffs are skipped in either UMC ECC irq or page retirement calling of sync flood isr. Signed-off-by:
-
Guchun Chen authored
Bad page information should not be exposed by sysfs when bad page retirement is disabled, so decouple it from ras sysfs group creating, and add one guard before creating. Signed-off-by:
-
Guchun Chen authored
Add one definition for the RAS module's FS name. It's used in both debugfs and sysfs cases. v2: Use static variable instead of macro definition. Signed-off-by:
-
