- 27 Mar, 2018 8 commits
-
-
Lucas De Marchi authored
Replace all users of pll->name to use pll->info->name. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-5-lucas.demarchi@intel.com
-
Lucas De Marchi authored
Replace all users of pll->funcs.* to use pll->info->funcs->*. The extra indirection here is not on any critical path and we can leave all const data together. Signed-off-by:
-
Lucas De Marchi authored
This way we can stop copying fields from dpll_info to intel_shared_dpll one by one. The migration of each field will come on separate patches. Signed-off-by:
-
Lucas De Marchi authored
This will allow the struct to be embedded in intel_shared_dpll. Signed-off-by:
-
Lucas De Marchi authored
In some places we end up converting switch statements to a series of if/else, particularly when introducing helper functions to handle a group of cases. It's tempting to either leave a wrong warning (since now we don't have a switch case anymore) or to convert to WARN(1, ...), but we can just provide a better message and avoid the doubt when such conversions arrise. Introducing a warning inside i915_driver_load() just for tests we get: [ 4535.233717] Missing case (ret == 0) [ 4535.233868] WARNING: CPU: 1 PID: 795 at drivers/gpu/drm/i915/i915_drv.c:1341 i915_driver_load+0x42/0x10e0 [i915] which is clear enough. v2: remove __func__ since this is already on the warning. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
If the request is still waiting on external fences, it has not yet been submitted to the HW queue and so we can forgo kicking the submission tasklet when re-evaluating its priority. This should have no impact other than reducing the number of tasklet wakeups under signal heavy workloads (e.g. switching between engines). v2: Use prebaked container_of() References: f6322edd ("drm/i915/preemption: Allow preemption between submission ports") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Chris Wilson authored
For the off-chance we have an interrupt posted and haven't processed the CSB. v2: Include tasklet enable/disable state for good measure. Signed-off-by:
-
Chris Wilson authored
When cancelling the requests and clearing out the ports following a successful preemption completion, also clear the active flag. I had assumed that all preemptions would be followed by an immediate dequeue (preserving the active user flag), but under rare circumstances we may be triggering a preemption for the second port only for it to have completed before the preemotion kicks in; leaving execlists->active set even though the system is now idle. We can clear the flag inside the common execlists_cancel_port_requests() as the other users also expect the semantics of active being cleared. Fixes: f6322edd ("drm/i915/preemption: Allow preemption between submission ports") Signed-off-by:
-
- 23 Mar, 2018 15 commits
-
-
Paulo Zanoni authored
Protect the macro parameters with parens in order to avoid priority issues on macro evaluation when the macro argument is not a single operand. This is not a problem today, but it could be in the future. I found this while reviewing a patch that introduces new callers for the macros. v2: Rebase. Reference: commit 04416108 ("drm/i915/cnl: Add registers related to voltage swing sequences.") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180323195853.4599-1-paulo.r.zanoni@intel.com
-
Nabendu Maiti authored
Gen11 supports upto 5k source scaling v2: Re-factoring of code as per review v3: Corrected max Vertical size and indentation v4: Added max Vertical dst size in same patch Reviewed-by:
Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Extend enum hpd_pin to port F so that we can start using this for ICL. v2: Rebase. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Manasi Navare authored
This table is used for voltage swing programming sequence during DDI Buffer initialization for MG PHY DDI Buffers on Icelake. v2 (from Paulo): * Fix white space issues. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Manasi Navare authored
On Icelake platform, MG PHY is used when operating in DP alternate mode or the legacy HDMI or DP modes. DDI Ports C, D, E, F are MG PHY DDI ports on ICL. This patch adds the necessary voltage swing programming related register definitions and macros for MG PHY DDI ports. v4 (from Paulo): * Use _PORT instead of _PICK * Change some mask names to our current coding standards * Stay under 80 columns v3: * Rebase on new revision of patches v2: * Remove whitespaces in the #defines (Paulo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
-
Manasi Navare authored
These tables are used on voltage vswing sequence initialization on Icelake. The swing_sel on the spec's table is defined in a 4 bits binary like 1010. However the register bits are split in upper 1 bit swing_sel and lower 3 bits swing sel. In this table here we store this value as a single value in hex like it is mentioned in the Bspec and split it to the upper and lower bit values only while programming the registers. For instance: b1010 is written as 0xA and then while writing to the register, the upper 1 bit is obtained by (0xA & 0x8) and shifting by appropriate bits while lower 3 bits are obtained by (0xA & 0x7) and shifting by appropriate bits. Some of the columns need to be updated after the spec is updated. v5 (from Paulo): * Checkpatch fixes. v4 (from Paulo): * Fix minor typo * Coding style conformance v3: * Get rid of HDMI/DVI tables, same as DP (Paulo) * Use combo_phy in ddi buf trans table defs (Paulo) v2: * Added DW4_scaling_hex column to the translation tables (Rodrigo) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Manasi Navare authored
This patch defines register definitions required for ICL voltage vswing programming for Combo PHY DDI Ports. It uses the same bit definitions and macros as the CNL voltage swing sequences. v8 (from Paulo): * Rebase. v7: * Kill _MMIIO_PORT2_LN (Paulo) v6: * Replace some spaces with TAB (Paulo) v5: * Use _PORT instead of _PICK (Paulo) * Remove DW7 defs for ICL, not used (Paulo) v4: * Rebase after _PICK was used instead of _PORT3 * Use _PICK for _MMIO_PORT2 since address of B is less than address of A so cant use the math (Paulo) v3: * Make changes to the existing macro in a diff patch (Paulo) v2: * Add new defs fro ICL regs (Paulo) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Imre Deak authored
After commit dd9f31c7 Author: Imre Deak <imre.deak@intel.com> Date: Wed Aug 16 17:46:07 2017 +0300 drm/i915/gen9+: Set same power state before hibernation image save/restore during hibernation/suspend the power domain functionality got disabled, after which resume could leave it incorrectly disabled if the ACPI target state was S0 during suspend and i915 was not loaded by the loader kernel. This was caused by not considering if we resumed from hibernation as the condition for power domains reiniting. Fix this by simply tracking if we suspended power domains during system suspend and reinit power domains accordingly during resume. This will result in reiniting power domains always when resuming from hibernation, regardless of the platform and whether or not i915 is loaded by the loader kernel. The reason we didn't catch this earlier is that the enabled/disabled state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform and kernel config dependent: on my SKL the target state is S4 during PMSG_FREEZE and (with the driver loaded in the loader kernel) S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during PMSG_FREEZE but (contrary to this) power domains are not initialized during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or it's loaded but without the DMC firmware being available. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196 Reported-and-tested-by: amn-bas@hotmail.com Fixes: dd9f31c7 ("drm/i915/gen9+: Set same power state before hibernation image save/restore") Cc: amn-bas@hotmail.com Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Chris Wilson authored
Commit 0f36a85c ("drm/i915: Flush pending interrupt following a GPU reset") got confused and only applied the flush to the set-wedge path (which itself is proving troublesome), but we also need the serialisation on the regular reset path. Oops. Move the interrupt into reset_irq() and make it common to the reset and final set-wedge. v2: reset_irq() after port cancellation, as we assert that execlists->active is sane for cancellation (and is being reset by reset_irq). References: 0f36a85c ("drm/i915: Flush pending interrupt following a GPU reset") Signed-off-by:
-
Michal Wajdeczko authored
We were fetching uC firmwares in separate uc_init_fw step, while there is no reason why we can't fetch them during init_early. This will also simplify upcoming patches, as size of the firmware may be used for register initialization. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Michal Wajdeczko authored
In upcoming patch, we want to perform more actions in early initialization of the uC. This reordering will help resolve new dependencies that will be introduced by future patch. v2: s/i915_gem_load_init/i915_gem_init_early (Chris) v3: s/i915_gem_load_cleanup/i915_gem_cleanup_early (Michal) Signed-off-by:
-
Piotr Piórkowski authored
If GuC firmware is not available on the system and we load i915 with enable GuC, then we hit this null pointer dereference issue: [ 71.098873] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 71.098938] IP: intel_uc_fw_upload+0x1f/0x360 [i915] [ 71.098947] PGD 0 P4D 0 [ 71.098956] Oops: 0000 [#1] PREEMPT SMP PTI [ 71.098965] Modules linked in: i915(O+) netconsole x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mei_me i2c_i801 prime_numbers mei [last unloaded: i915] [ 71.099005] CPU: 2 PID: 1167 Comm: insmod Tainted: G U W O 4.16.0-rc1+ #337 [ 71.099018] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0065.2018.0103.1000 01/03/2018 [ 71.099077] RIP: 0010:intel_uc_fw_upload+0x1f/0x360 [i915] [ 71.099087] RSP: 0018:ffffc90000417aa0 EFLAGS: 00010282 [ 71.099097] RAX: 0000000000000000 RBX: ffff88084cad12f8 RCX: ffffffffa03e9357 [ 71.099108] RDX: 0000000000000002 RSI: ffffffffa034dba0 RDI: ffff88084cad12f8 [ 71.099118] RBP: 0000000000000002 R08: ffff88085344ca90 R09: 0000000000000001 [ 71.099128] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88084cad0000 [ 71.099139] R13: ffffffffa034dba0 R14: 00000000fffffff5 R15: ffff88084cad12b0 [ 71.099151] FS: 00007f7f24ae2740(0000) GS:ffff88085e200000(0000) knlGS:0000000000000000 [ 71.099162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.099171] CR2: 0000000000000008 CR3: 0000000855f48001 CR4: 00000000003606e0 [ 71.099182] Call Trace: [ 71.099246] intel_uc_init_hw+0xc8/0x520 [i915] [ 71.099303] i915_gem_init_hw+0x11f/0x2d0 [i915] [ 71.099364] i915_gem_init+0x2b9/0x640 [i915] [ 71.099413] i915_driver_load+0xb74/0x1110 [i915] [ 71.099462] i915_pci_probe+0x2e/0x90 [i915] [ 71.099476] pci_device_probe+0xa1/0x130 [ 71.099488] driver_probe_device+0x302/0x470 [ 71.099502] __driver_attach+0xb9/0xe0 [ 71.099513] ? driver_probe_device+0x470/0x470 [ 71.099525] ? driver_probe_device+0x470/0x470 [ 71.099538] bus_for_each_dev+0x64/0x90 [ 71.099550] bus_add_driver+0x164/0x260 [ 71.099561] ? 0xffffffffa04d6000 [ 71.099572] driver_register+0x57/0xc0 [ 71.099582] ? 0xffffffffa04d6000 [ 71.099593] do_one_initcall+0x3b/0x160 [ 71.099606] ? kmem_cache_alloc_trace+0x1c3/0x2a0 [ 71.099621] do_init_module+0x5b/0x1f9 [ 71.099635] load_module+0x2467/0x2a70 [ 71.099654] ? SyS_finit_module+0xbd/0xe0 [ 71.099668] SyS_finit_module+0xbd/0xe0 [ 71.099682] do_syscall_64+0x73/0x1c0 [ 71.099694] entry_SYSCALL_64_after_hwframe+0x26/0x9b [ 71.099706] RIP: 0033:0x7f7f23fb40d9 [ 71.099717] RSP: 002b:00007ffda7d67ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 71.099734] RAX: ffffffffffffffda RBX: 000055f96e2a8870 RCX: 00007f7f23fb40d9 [ 71.099748] RDX: 0000000000000000 RSI: 000055f96e2a8260 RDI: 0000000000000003 [ 71.099763] RBP: 000055f96e2a8260 R08: 0000000000000000 R09: 00007ffda7d68088 [ 71.099777] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 [ 71.099791] R13: 000055f96e2a8830 R14: 0000000000000000 R15: 000055f96e2a8260 [ 71.099810] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 41 54 49 89 f5 55 53 48 c7 c1 57 93 3e a0 48 8b 47 10 48 89 fb 4c 8b 07 <48> 8b 68 08 8b 47 28 85 c0 74 15 83 f8 01 48 c7 c1 5b 93 3e a0 [ 71.100004] RIP: intel_uc_fw_upload+0x1f/0x360 [i915] RSP: ffffc90000417aa0 [ 71.100020] CR2: 0000000000000008 [ 71.100031] ---[ end trace d8ac93c30ceff5b2 ]-- Fixes: 6b0478fb ("drm/i915: Implement dynamic GuC WOPCM offset and size calculation") v2: don't assume it is always GuC FW (Michal) v3: added a new variable to avoid exceeding the number of characters in the line (Michal) Signed-off-by:
Piotr Piórkowski <piotr.piorkowski@intel.com> Reported-by:
Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jackie Li <yaodong.li@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by:
Jackie Li <yaodong.li@intel.com> Signed-off-by:
-
Ville Syrjälä authored
When we're disabling the HDMI link we try to reset the scrambling and TMDS bit clock ratio back to the default values. This will fail if the sink has already been disconnected. Thus we should not print an error message when resetting the scrambling/TMDS bit clock ratio fail during disable. During enable we do want the error, and during disable we may still want to know what happended for debug purposes so let's use DRM_DEBUG_KMS() there. v2: Remember them consts v3: Go back to just one function and print the errors/debugs from callers (Shashank) Cc: Shashank Sharma <shashank.sharma@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105644 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105655Signed-off-by:Shashank Sharma <shashank.sharma@intel.com>
-
Tvrtko Ursulin authored
Log up to sseu->max_slices instead basing on ARRAY_SIZE since to avoid printing impossible and empty slices for a platform. Also compact slice total and slice mask into one log line. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180321103228.32205-1-tvrtko.ursulin@linux.intel.com
-
Mika Kuoppala authored
Looping through rps frequencies when both min and max are zero ends up into an endless loop. This can happen during hardware enablement. Bail out early if rps frequencies are not correctly set yet. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 22 Mar, 2018 6 commits
-
-
Chris Wilson authored
After resetting the GPU (or subset of engines), call synchronize_irq() to flush any pending irq before proceeding with the cleanup. For a device level reset, we disable the interupts around the reset, but when resetting just one engine, we have to avoid such global disabling. This leaves us open to an interrupt arriving for the engine as we try to reset it. We already do try to flush the IIR following the reset, but we have to ensure that the in-flight interrupt does not land after we start cleaning up after the reset; enter synchronize_irq(). As it current stands, we very rarely, but fatally, see sequences such as: 2.... 57964564us : execlists_reset_prepare: rcs0 2.... 57964613us : execlists_reset: rcs0 seqno=424 0d.h1 57964615us : gen8_cs_irq_handler: rcs0 CS active=1 2d..1 57964617us : __i915_request_unsubmit: rcs0 fence 29:1056 <- global_seqno 1060 2.... 57964703us : execlists_reset_finish: rcs0 0..s. 57964705us : execlists_submission_tasklet: rcs0 awake?=1, active=0, irq-posted?=1 v2: Move the sync into the execlists reset handler so that we coordinate the flush with disabling the interrupt handling and canceling the pending interrupt. v3: Just use synchronize_hardirq() to avoid the might_sleep(), we do not yet have threaded-irq to worry about. Signed-off-by:Jeff McGee <jeff.mcgee@intel.com>
-
Chris Wilson authored
Using engine->irq_posted for execlists, we are not always serialised by the tasklet as we supposed. On the reset paths, the tasklet is disabled and ignored. Instead, we manipulate the engine->irq_posted directly to account for the reset, but if an interrupt fired before the reset and so wrote to engine->irq_posted, that write may not be flushed from the local CPU's cacheline until much later as the tasklet is already active and so does not generate a mb(). To correctly serialise the interrupt with reset, we need serialisation on the set_bit() itself. And at last Mika can be happy. Signed-off-by:
-
Chris Wilson authored
Watch what happens if we try to reset with a queue of requests with varying priorities -- that may need reordering or preemption across the reset. v2: Tweak priorities to avoid starving the hanging thread. Signed-off-by:
-
Chris Wilson authored
If we fail to reset the GPU in a timely fashion, dump the GEM trace so that we can see what operations were in flight when the GPU got stuck. v2: There's more than one timeout that deserves tracing! v3: Silence checkpatch by not even using a product at all! Signed-off-by:
-
Chris Wilson authored
Both request_submit and request_unsubmit deal with transferring the request from the client's timeline onto the execution timeline and back again. As both functions deal with a pair of timeline's, using a shorthand for just one of them is slightly confusing, especially as the different functions use the shorthand for the alternate timeline. Instead, use the full version of each timeline so it should be easier to keep track of the transfer between the request/client and the engine. v2: Refactor the common lock+list_move v3: Be clear we require the other timeline list to be locked as well. Signed-off-by:
-
Chris Wilson authored
We pre-increment the timeline->seqno when handing it to the request, make sure the GEM_TRACE takes this into account. Otherwise, it appears that we go backwards over a preemption point: 1d..1 157681077us : __i915_request_unsubmit: vcs0 fence 75e:3 <- global_seqno 17 0d.s1 157681113us : __i915_request_submit: vcs0 fence 75e:3 -> global_seqno 16 Fixes: d9b13c4d ("drm/i915: Trace GEM steps between submit and wedging") Signed-off-by:
-
- 21 Mar, 2018 10 commits
-
-
Dhinakaran Pandiyan authored
HSW and BDW have SRD_AUX_{CTL, STATUS} registers that the driver needs to setup for the HW to use whenever exiting PSR. SKL+ hardware use hardcoded values for the same and do not need any registers to be setup. So, use drm_dp_dpcd_writeb() for a one-time write during PSR enable and setup the PSR aux registers on HSW and BDW for later use by HW. We also end up writing to reserved bits in SRD_AUX_CTL by reusing intel_dp->get_aux_send_ctl() for HSW and BDW, fix this. Since the AUX register setup is source side programming, move the call to enable_source() from enable_sink(). Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Non-functional change useful for the following patch. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Chris Wilson authored
We were relying on the uncached reads when processing the CSB to provide ourselves with the serialisation with the interrupt handler (so we could detect new interrupts in the middle of processing the old one). However, in commit 767a983a ("drm/i915/execlists: Read the context-status HEAD from the HWSP") those uncached reads were eliminated (on one path at least) and along with them our serialisation. The result is that we would very rarely miss notification of a new interrupt and leave a context-switch unprocessed, hanging the GPU. Fixes: 767a983a ("drm/i915/execlists: Read the context-status HEAD from the HWSP") Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk
-
Michal Wajdeczko authored
There is no need to mix parameter types in public CT functions as we can always accept intel_guc_ct. v2: fix 'Return' doc, s/dev_priv/i915 (Sagar) Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
We already try to keep all GuC log related code in separate file, handling flush event should be placed there too. This will also allow future code reuse. v2: rebased Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
While today we are modifying GuC enabled msg mask only in GuC log, this code should be defined as generic GuC to allow future code reuse. Signed-off-by:
-
Michal Wajdeczko authored
Usually we use shift/mask macros for bit field definitions. Union guc_log_control was not following that pattern. Additional bonus: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-25 (-25) Function old new delta intel_guc_log_level_set 388 363 -25 v2: prevent out-of-range verbosity (MichalWi) Signed-off-by:
-
Michal Wajdeczko authored
We should avoid using guc_log prefix for functions that don't operate on GuC log, but rather request action from the GuC. Better to use guc_action prefix. v2: rebase + naming compromise v3: rebase Signed-off-by:
-
Michal Wajdeczko authored
We try to keep all HuC related code in dedicated file. There is no need to peek HuC register directly during handling getparam ioctl. Signed-off-by:
-
Kelvin Gardiner authored
This patch adds support to detect ICL, slice, subslice and EU fuse settings. Add addresses for ICL 11 slice, subslice and EU fuses registers. These register addresses are the same as previous platforms but the format and / or the meaning of the information is different. Therefore Gen11 defines for these registers are added. Bspec: 9731 Bspec: 20643 Bspec: 20673 v2: Update fusing information storage after introducing the new query uAPI (Lionel) v3 (Oscar): - The maximum number of slices in ICL 11 is 1 - The subslice disable fuse can potentially store information in all bits - GEN_MAX_SUBSLICES has to be increased to 8 - Don't trust the slice enabled fuse outside the max number of expected slices - Indentation fix and some reordering and renaming of local variables v4: Use single space after Cc tag Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:Kelvin Gardiner <kelvin.gardiner@intel.com> Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Reviewed-by:
-
- 20 Mar, 2018 1 commit
-
-
Chris Wilson authored
Not all callers want the GPU error to handled in the same way, so expose a control parameter. In the first instance, some callers do not want the heavyweight error capture so add a bit to request the state to be captured and saved. v2: Pass msg down to i915_reset/i915_reset_engine so that we include the reason for the reset in the dev_notice(), superseding the earlier option to not print that notice. v3: Stash the reason inside the i915->gpu_error to handover to the direct reset from the blocking waiter. Signed-off-by:
-
